Block menu complementary management module menu

how to block complementary module menu management in firefox 3.6 and 4 ?

Hi Asad,
You can activate funds management using the path
You activate Funds Management in the IMG of Funds Management Government, under Actual and Commitment Update/Integration → Activate/Deactivate Funds Management.
Refer below SAP help for more details
https://help.sap.com/saphelp_erp60_sp/helpdata/en/f0/ca3f1c260211d28a430000e829fbbd/content.htm
How to activate Funds Management? - Public Sector - SCN Wiki
Hope this helps.
Regards,
Deepak Kori

Similar Messages

  • Reposting: Unable to Update Integrated Management Module (IMM) firmware

    This post was originally posted on IBM’s developerWorks public forum (https://www.ibm.com/developerworks/community/forums/html/topic?id=0e1070ab-fbdc-4aa0-b9ea-3f9e391759...  The following is a summary of the post issue and the response.
    Issue:
    I'm using the UpdateXpress System Pack Installer to update the Integrated Management Module (IMM) firmware on my System X server (model 7915) running Windows Server 2012 R2 Server Core.
    When I run the command to install the update (ibm_utl_uxspi_9.51_winsrvr_32-64.exe up -l "\\server\share" -m 7915) and it gets to the point where it is ready to install the IMM firmware update, it fails with the message "Unable to ping through IMM" and then references a log file.  According to the log file, the system is trying to ping "169.254.95.118" which is not the pre configured static IP address on the IMM interface.
    I am able to remotely ping the static IP that I've configured and I'm able to log into the IMM web interface. Everything appears to be working correctly with the IMM, except that this UpdateXpress installer is not picking up the configured IMM’s static address.
    Solution:
    The UpdateXpress System Pack installer does not use the Integrated Management Module (IMM)'s interface and it will try to contact the card via the USB-LAN interface via the OS. The 169 address is the DHCP address assigned by the OS to the USB-LAN card (you should see it in a list of interfaces). When you run the installer from the OS, it will search for the card via the USB-LAN and if it's blocked it will fail.  Any security restrictions on that interface or a firewall running on it will block it.
    Since you can login to the card itself, you can always just upload the IMM firmware package (.exe or .bin) to the card directly via its own Firmware Update function.  This option is on the left about halfway down the menu. All you need to do is to give it the file path to where the package is located and follow the prompts for the upload and update.
    Or, you can remove the static IP you assigned and set it back to DHCP.  Typically the installer will find the interface, enable it as needed, and then an IP address will get assigned automatically.

    Hi Lawrence,
    Sorry for the delay, i was Out of station. Also, one info i have to share with you, there is an another server with same version (7.5.7601)
    and is getting FEP updates without any fail.
    I haven't rebooted the server because it is critical server, so i have applied the remaining and here is the logs.
    =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
    2014-03-02 21:57:00:057
    Triggering AU detection through DetectNow API
    2014-03-02 21:57:00:057
    Can not perform non-interactive scan if AU is interactive-only
    2014-03-02 22:01:14:641
    WARNING: GetConfig failure, error = 0x80244019, soap client error = 10, soap error code = 0, HTTP status code = 404
    2014-03-02 22:01:14:641
    WARNING: PTError: 0x80244019
    2014-03-02 22:01:14:641
    WARNING: GetConfig_WithRecovery failed: 0x80244019
    2014-03-02 22:01:14:641
    WARNING: RefreshConfig failed: 0x80244019
    2014-03-02 22:01:14:641
    WARNING: RefreshPTState failed: 0x80244019
    2014-03-02 22:01:14:641
    WARNING: PTError: 0x80244019
    2014-03-02 22:01:14:641
    WARNING: Reporter failed to upload events with hr = 80244019.
    2014-03-02 22:26:16:148
    WARNING: GetConfig failure, error = 0x80244019, soap client error = 10, soap error code = 0, HTTP status code = 404
    2014-03-02 22:26:16:148
    WARNING: PTError: 0x80244019
    2014-03-02 22:26:16:148
    WARNING: GetConfig_WithRecovery failed: 0x80244019
    2014-03-02 22:26:16:148
    WARNING: RefreshConfig failed: 0x80244019
    2014-03-02 22:26:16:148
    WARNING: RefreshPTState failed: 0x80244019
    2014-03-02 22:26:16:148
    WARNING: PTError: 0x80244019
    2014-03-02 22:26:16:148
    WARNING: Reporter failed to upload events with hr = 80244019.
    =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
    Jay :)

  • How to incorporate training and event management module in ess1.0

    Hi all,
    I am implementing ess1.0 on EP6.0, NW7.0, ecc6.0.
    now in ess1.0 i could not find traing and event manag. module, but i found it in ITS version of ess.
    how can i incorporate 'traing and event manag' module in ess1.0??
    do i need to download two version of ess?...i doubt if its feasible!...can anybody guide me on this?
    I am new to portal, and hence trying to learn thing in EP ESS...please throw in your help ASAP
    Regards,
    JJ

    hi all,
    can anybody please throw some light on the above query?
    i m trying to search in forum but i am unable to find any reasonable answer to this.
    Regards,
    JJ

  • Error loading Management Modules of Enterprise Manager 8.2.3.5

    Hi all,
    actually we have installed the Wily Enterprise Manager 8.2.3.5 on Linux x64.
    Starting the manager we get the following errors in the IntroscopeEnterpriseManager.log
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "MSFT .NET - Duet"
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "SAP J2EE - Duet"
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "SAP J2EE - NetWeaver PI(XI)"
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "SAP Navigation"
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "SAP Host"
    2/23/11 03:41:09 PM CET [INFO] [Manager.ManagementModule] Loading Management Module "SAP Business Objects"
    2/23/11 03:41:10 PM CET [ERROR] [Manager]
    2/23/11 03:41:10 PM CET [ERROR] [Manager]
    2/23/11 03:41:10 PM CET [ERROR] [Manager]
    2/23/11 03:41:13 PM CET [ERROR] [Manager]
    The error indicates a problem during the load of the Management Modules.
    Also we observed problems calling dashboards from the Console in the wily Introscope Webview.
    For e.g. the dashboard J2EE CPU and memory Detail
    Calling this dashbord ends in the following error:
    An error occurred fetching this dashboard from the Enterprise Manager: null
    What could be the problem for the errors during the Management Modul load ?
    Thanks in advance for your help.
    Kind regards
    Anton

    Hello Anton,
    Please download the SAP Management Modules from the marketplace.
    Check note 797147 and note  1579474 about Management Modules usage.
    Best regards,
    Guilherme Balbinot

  • List of released sales orders which were blocked during credit management

    If sales order is blocked during credit management, then it is released by Authorised person using VKM3 Tcode. Further if we want to see list of released documents, VKM2 shows the same. However VKM2 does not shows the released documents once that are billed (using VF01). Suppose post billing one wants to see how many orders were released during specific period, how it can be seen. Is there any transaction code to see such records.
    Vijay

    You can use V.23 to view the report. The report will show you what sales order is ready for release for billing.

  • Discoverer Report whenever we create a new customer , the information is dropping off the Property manager module

    Dear Friends,
    whenever we create a new customer , the information is dropping off the Property manager module.
    Can you please help as its a very critical business issue now.
    Thanks a lot in advance.
    Kind Regards
    Siva Charan

    Dear Friends,
    whenever we create a new customer , the information is dropping off the Property manager module.
    Can you please help as its a very critical business issue now.
    Thanks a lot in advance.
    Kind Regards
    Siva Charan

  • Color Management Module In Photoshop

    Question:  A color management module is the software that defines the mathematical manipulations by which color conversions are made?

    Thanks for your quick reply.
    From: ronzie99 <[email protected]>
    To: IronEyesWally <[email protected]>
    Sent: Thursday, December 8, 2011 1:09 PM
    Subject: Color Management Module In Photoshop
    Re: Color Management Module In Photoshop created by ronzie99 in Photoshop Elements - View the full discussion
    There are different types of icc\icm profiles used in color management.
    First is the color workspace. PSE is by default set to create files in the color space embedded in the image opened and if not then the default color space of your choosing. The type of color space describes the gamut limitations of that color space.
    Next are device specific color profiles. These are the display and printer profiles but can also exist for input devices. These profiles serve as tables to fit the measured characteristicsof the device to the color space requireed. For output devices there are Rendering Intents that can be chosen to determine how the limitations of a device can be best interpolated to fit the color space of an image  into the limitations of the device for best appearance.
    A practical way to think of a display to output workflow think of the color space situated between the displayed image and the output device with the color space in the middle defining limitations as a standard. The devices profiles are then measured against the standard color profile to create corrections or translation table so they react appropropriately to present the image on the display for the output device target profile in an attempt to get a 'what you see is what you get' envirionment for the specific devices used.
    You need to create via calibration either by you (better) or insttall from the manufacturer a profile for the display. This matches your display device to the 'standard' profile. If you go to print then you'll need to install a printer profile (which varies by ink and paper type) either OEM or from paper suppliers or created by a measuring device you can purchase if you go 'rogue' regrding non-OEM inks and papers.
    PSE does not have a soft-proof mode built in like Photoshop. It does have a setup, though, where it will let you assign every time you print an output profile that you select if you want PSE to directly manage the printer for tonality and color, in which case in the printer driver itself you disable color management only leaving the driver to descrive the image quality and surface type of the paer chosen and choosing none or leaving icm unchecked in the printer driver. The profile is selected in the PSE printer driver under advanced.
    Soft proof mode is where the display translation is further manipulated to approximate the printer output. This can happen because you have calibrated your monitor to a standard and a printer tothat same standard. I have an add-on for PSE 10 called Elements +  that in addition to lots of filters and effects adds some soft-proofing capability and curve color level adjustments to PSE. http://www.simplephotoshop.com/elementsplus/index.htm
    In practical terms that is the function of color management.
    BTW: The defacto color space for the Internet web browsers is sRGB. Use this when correcting color for web distribution.
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4071890#4071890
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4071890#4071890. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Is Quality management module required to be used for vendor evaluation?

    Hi,
    There is vendor evaluation functionality in MM. Is use of quality management module is mandatory for this? I wish to track the performance of vendor regarding quality (How much he has supplied, out of which how many are accepted and how many are rejected). Can I get this report without using QM?
    Thanks in advance,
    Satish

    you can enter Quality results manually in vendor evealuation, so QM is not necessary for this, however with QM you can get the scores semi-automatic and  automatically.

  • Help required in finding out the tables for FS-Claims Management module

    Hi All,
    In FS - claims Management module, i need to find out from which tables we can fetch the following fields,
    INSURED             : insured person
    DESCINSURED     : Description of insured person
    CLAIMANT     : person eligible for benefits
    DESCCLAIMANT     : Description of insured claimant
    OUTSTRES     : Outstanding reserve
    PAID             : paid amount
    INCURRED     : paid amount + outstanding reserve LOSSDESC     : loss description
    Thanks & Regards,
    Anil

    Hi Anil,
    I was searching for the fields you mentioned using SE15 and came up with lot of hits. I thought, it would be good if you do the same thing and you can find the relevant tables as might you have good idea in this area.
    I will tell you the procedure and I hope it will give you good results.
    1) Go to SE15 (Repository Info System)
    2) Click on "ABAP Dictionary"
    3) Click on "Fields"
    4) Select "Table Fields"  and enter description as "insured" on the right hand side panel with Application component as "FS"
    5) Click "Execute" (F8) and you will lot of hits.
    You need to search through it to find relevant tables for your purpose.
    Hope this will give you an idea.
    Regards,
    Vicky
    PS: Award points if helpful

  • Problem with Per diem calculation in Travel Management module

    Dear ALL,
    We have configured Travel Management module in SAP and we have an issue with per diem calculation, viz.,  whenever we add an additional destination in the trip (T.code TRIP). 
    Ex: Employee's travel plan from 10/8/2011 (06.00 hrs) to 13/8/2011 (06:00 hrs)... in 24 hrs format.  When the employee goes directly to one destination and coming back, the per diem calc is coming right.  i.e., per diem amount for 3 days. 
    But when we add additional destination between the trip period-  viz.,  either 10th eve (18.00 hrs) or on 11th Aug-  the per diem calc is being done by system for 4 days instead of 3 days only.
    In otherwords, for every additional destination in the itinerary, one extra per diem is being calculated (when we simulate in T.Code: PR05)
    Would appreciate guidance ASAP.
    Regards,
    Santosh

    hello,
    I am having similar kind of problem can you please share your solution
    Regards
    Sarthak Arora

  • Project management module not starting

    Hi
    I am facing problem in running
    primavera project management module.
    I had lock
    my system and then upon opning my login i faced an error
    which are shown below.
    Error:
    "The file C:program files\primavera\project
    management\PM.ini can not be set to read write
    status"
    After clik on OK.<br
    />Following error comes:
    "An application
    event has been intercepted.Please note the event code for
    the reference.<br />Event code: AVAA0-3953-8"<br
    />
    Kindly help me out in
    resolving this situation earliest.
    <br
    />
    Regards,
    Jyotir

    Thanks for your reply
    I resolved that
    issue.
    Your point of view is right,it's
    admin rights issue.
    I lost permission for
    read/write for controlling application in .ini file of
    project management.
    Once again thanks for
    your cooperation and advice.
    <br
    />Regards,
    Jyotir

  • Resource Assignment without Project Resource Management Module

    Hi Dina,
    We are implementing Oracle projects for one of our customers. The customer does not want to implement Project Resource Management module. Is it possible to assign resources to a project or create a new requirement using the Resources tab in Project screen (HTML page) without implementing the Project Resource Management module. Pls let us know.
    Regards,
    Sri
    Edited by: user12209290 on Nov 18, 2011 9:30 AM

    Hi
    With Project Management you can assign resources to the work plan. Resources might be named people or generic resource by job.
    You can track planned hours by resource versus actual time worked, You can look at roll-up of planned hours across multiple projects for the same resource, or summarization of planned and actual hours using the RBS.
    However, you will not get the functionality of demand published to resource managers, and the search functionality for available person to join the requiring project.
    Dina

  • How link Appraisal in Performance Management Module and Person

    Hi experts!
    I think in Performace Management Module there are these objects:
    VA-Appraisal Template
    VB-Criteria Group
    VC-Criterion
    VH-Proces intem+
    VJ-Goal
    How we should link the objectives, appraisal template, etc. to the employee or employees what we want to evaluate the objectives?
    Kind regards,
    Julian.

    Hi,
    the object appraisal template is linked with person object.
    meaning person is attached to the appraisal template ( provided ) .
    objectives are set in template and then person gets access to template and wherein he fills his objective.
    good luck

  • Cost of Exit Management module in Oracle HRMS

    Hi,
    Please let me know the cost of implementing the Exit Management module in Oracle HRMS
    Thanks

    Pl clarify what you mean by "cost" - license cost ? implementation cost ?
    HTH
    Srini

  • Procure to Pay, Cash Management modules of EBS R12

    Hello
    Does anyone know whether Procure to Pay and Cash Management modules of R12 EBS data gets into what OBI Apps modules?
    Thanks in advance
    Kris

    hi,
    Procure to pay is involved in Procurement and spend analytics, Financials.
    Cash Management is in Financials.
    Thanks
    -Stone.

Maybe you are looking for