Block MO changes if PO exists
Hi,
My user does not want the MO can be saved for changes if PO exists. I have done it in the PM enhancement --> IWO10009 PM Order: Customer Check for 'Save' Event. However, I've overlooked some functions such as TECO, BUSINESS COMPLETE should not be affected by this restriction.
Anyone of you can advise me the complete cycle of a Maintenance Order with PR, what should and should NOT be restricted for MO changes if PO exists ? Thanks in advanced.
Hi Nies,
If you are not using the material then you can go for Validation, under Operative Structure> Network> Validation.
Attach the validation with OPSA click on Automatic.
In the second scenario if you are using Material Component, as Mr.Muralidharan said OPSG there you can restrict the change by selecting Error Message.
1. Tcode OPSG in Setting see all the object are selected.
2. Click on Component tab under change in Purchase Order Exist tab select Error.
Regards'
Syed
Similar Messages
-
Is there any way to block PR changes when PO exists in project builder
Dear All,
Could you please advice...is there any way to block PR changes (quantity,price, etc) when PO exists in project builder ?
Many thanks in advance.
NiesHi Nies,
If you are not using the material then you can go for Validation, under Operative Structure> Network> Validation.
Attach the validation with OPSA click on Automatic.
In the second scenario if you are using Material Component, as Mr.Muralidharan said OPSG there you can restrict the change by selecting Error Message.
1. Tcode OPSG in Setting see all the object are selected.
2. Click on Component tab under change in Purchase Order Exist tab select Error.
Regards'
Syed -
Blocking the change of Supplier Invoice Number on update using SP
Hi Mentors,
Just wondering if blocking the change of Supplier Invoice No. (OPCH.NumAtCard) is possible using SP_TransactionNotification?
I've been trying to make it work with the following code:
--Prevent Duplicate Supplier Ref. No. in AP Invoice
if @object_type = '18' and (@transaction_type in ('A' ,'U'))
begin
declare @RefNo as varchar (100)
declare @CardCode as varchar (100)
if (@object_type = '18')
begin
select @RefNo = NumAtCard, @CardCode = CardCode from OPCH T0 where docentry = @list_of_cols_Val_tab_del
begin
if (@RefNo is not null)
begin
if 1!= (select count (docentry) from OPCH where (NumatCard = @RefNo) and (cardcode = @CardCode))
begin
select @error = 10
select @error_message = 'Duplicate Supplier Reference Number!'
End
End
End
End
End
--Prevent Supplier Ref. No. in AP Invoice from being changed during update mode.
if @object_type = '18' and (@transaction_type = 'U')
begin
declare @DocEntry as int
if (@object_type = '18')
begin
select @RefNo = NumAtCard, @CardCode = CardCode , @DocEntry = DocEntry from OPCH T0 where DocEntry = @list_of_cols_Val_tab_del
begin
if (@RefNo != (select NumAtCard from OPCH where (CardCode = @CardCode) and (DocEntry = @DocEntry)))
begin
select @error = 10
select @error_message = 'Changing of Supplier Reference Number is not allowed!'
End
End
End
End
I'm not sure if this is really possible,and that I could be just beating the wind by trying.
Thanks in advance!
SeanTo avoid modifiing the vandor reference use this:
IF @Object_type = N'18' and @transaction_type = N'U'
BEGIN ---
declare @li int
declare @pref nvarchar(100)
set @li=
(select max(t.LogInstanc) from ADOC t
where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
set @pref=
(select isnull(t.NumAtCard,'') from ADOC t
where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
and t.LogInstanc=@li-1)
If @pref !='' and @pref !=
(select isnull(t.NumAtCard,'') from OPCH t
where t.DocEntry=@list_of_cols_val_tab_del)
Select @error = 10, @error_message = N'Changing of Supplier Reference Number is not allowed!'
END
--- To avoid using duplicated reference try this:
if @object_type = '18' and @transaction_type in (N'A', N'U') -- AP invoice
BEGIN ----
declare @Invoice AS VARCHAR(15)
declare @Card AS VarChar (20)
SELECT @invoice = NumatCard, @card = CardCode FROM dbo.OPCH
WHERE DocEntry = @list_of_cols_val_tab_del
If exists (SELECT T0.cardcode, T0.NumatCard FROM OPCH T0 where T0.NumatCard = @invoice
and T0.CardCode=@card and T0.DocEntry!=@list_of_cols_val_tab_del)
Select error = 10, @error_message = N'Duplicate Supplier Reference Number!'
END ---- -
Only query on existing form without any changes on the existing records?
Dear all,
I am working a brand new form. The form is able to query all the records from the table. However, when I leave the form, it will ask me "Do you want to save the changes you have made?" everytime. I didn't make any changes on the existing records.
My form only has 2 fields (one with LOV and one without).
Does anyone know what went wrong?
Thanks.How do you populate your datablock? Do you query one of your values in a Post-Query trigger?
However you are populating your datablock, Forms is detecting that the status of the Form, Block or Record is changing.
Also, please let us know your Forms version.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
After making changes to an existing pdf, when I select Save from the File menu Acrobat X Standard crashes and closes down. The same scenario happens if I choose Save As and select the same fie name. How do I save changes to an existing document? I can sometimes Save As using a new file name but that does not always work either.
Please try repairing Acrobat by going to the 'Help' menu > Repair Acrobat.
Also make sure that Acrobat is updated to the latest release.You can check for updates from the same 'Help' menu > check for updates.
Regards,
Ravi. -
BO4 - Changing name of existing connection on repository and impact on existing unx universes
Hi,
If we have universes (unx ) which have connections and want to rename the connection, I know we can change the name of the connection on the repository via the repository resources in the Information Design Tool.
I notice existing universes which use the connection still have the old name for their connection shortcut.
Is there a way to synchronise so that if change a name of universe connection the names of connection shortcust on existing universe connections are automticallly chnaged to reflect the new name?
ThanksHI
Changing name of existing connection not impact on existing unx universe, if backed connection CUID not changes, I think you can rename the existing connection in CMC .
Before doing test with sample example. -
Change to the existing outgoing positive payment file (EID 820)
Hello Experts,
I have to make a change to the existing outgoing positive payment file (EID 820).
The current scenario is:
We are running the payment run in SAP and generating IDocs using program RFFOEDI1 mentioned in printout data medium. The IDocs generated are of Basic Type PEXR2002. These IDocs then processed by SAP PI and converted to EDI and the EDI is sent to the Bank. Currently in this process, we are not assigning the check numbers at the time of payment run. Also the check numbers are not there in the IDocs. The Bank prints the checks and sends us the check number which we update in SAP using Z program.
Now there is a change in the requirement and we need to assign the check numbers at the time of payment run and also transmit them with the EDI file to the Bank. Bank will print the checks and send it to the vendors.
Now as per my understanding, the check number will not be assigned until I use the program RFFOUS_C in printout data medium.
Please suggest the possible options to generate IDocs which has the check number in it.
Thanks in advance
Sanjay SarodeYou can use RFFOEDO_1 can still generate check 3's, just maintain check number in the check lots configuration and ensure you assign the lots to the correct payment method.
Thanks
Shine -
Track changes made to existing comments
How can I track changes made to comments in Word 2010? It seems that with track changes on, you can tell which user made which edits within the body of a document, but track changes fails to track changes made to content within comments.
As far as I know, track changes would not track the changes made to existing comments. You can see:http://office.microsoft.com/en-001/word-help/change-options-for-track-changes-HA104053477.aspx?CTT=5&origin=HA102840151
Maybe we can track the changes made in comment with the help of VBA code.
Best Regards,
Wind -
Hi,
I am working on SSRS 2008 R2 - Tried to do some changes on an existing rdl & save - An unexpected error "External Component Has Thrown an Exception" pop up
Any suggestions please to resolve it.
thank you !!!
best regards,
VenkatHi Venkat,
The issue may be caused by the Visual Studio tried to close an invalid handle. This problem may happen if the operating system is a debug version, not a retail version. Please refer to the following steps to check.
1. Right-click on "My Computer".
2. Click "Properties".
3. Make sure there is no "Debug" words at the end of the "Windows edition" section.
Reference:
http://connect.microsoft.com/SQLServer/feedback/details/467954/sql-server-2008-install-on-windows-server-2008-fails-with-external-component-has-thrown-an-exception
If the operating system is debug version, please re-install the operating system with retail version to solve the issue.
Hope this helps.
Regards,
Alisa Tang
Alisa Tang
TechNet Community Support -
RMAN-05501: RMAN-11003 ORA-00353: log corruption near block 2048 change
Hi Gurus,
I've posted few days ago an issue I got while recreating my Dataguard.
The Main issue was while duplicating target from active database I got this errors during the recovery process.
The Restore Process Went fine, RMAN Copied the Datafiles very well, but stop when at the moment to start the recovery process from the auxiliary db
Yesterday I took one last try,
I follow same procedure, the one described in all Oracle Docs, Google and so on ... it's not a secret I guess.
The I got the same issue, same errors.
I read soemthing about archivelogs, and the Block corruption and so on, I've tried so many things (register the log... etc etc ), and than I read something about "catalog the logfile)
and that's waht I did.
But I was just connect to the target db.
contents of Memory Script:
set until scn 1638816629;
recover
standby
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 14-MAY-13
starting media recovery
archived log for thread 1 with sequence 32196 is already on disk as file /archives/CMOVP/stby/1_32196_810397891.arc
archived log for thread 1 with sequence 32197 is already on disk as file /archives/CMOVP/stby/1_32197_810397891.arc
archived log for thread 1 with sequence 32198 is already on disk as file /archives/CMOVP/stby/1_32198_810397891.arc
archived log for thread 1 with sequence 32199 is already on disk as file /archives/CMOVP/stby/1_32199_810397891.arc
archived log for thread 1 with sequence 32200 is already on disk as file /archives/CMOVP/stby/1_32200_810397891.arc
archived log for thread 1 with sequence 32201 is already on disk as file /archives/CMOVP/stby/1_32201_810397891.arc
archived log for thread 1 with sequence 32202 is already on disk as file /archives/CMOVP/stby/1_32202_810397891.arc
archived log for thread 1 with sequence 32203 is already on disk as file /archives/CMOVP/stby/1_32203_810397891.arc
archived log for thread 1 with sequence 32204 is already on disk as file /archives/CMOVP/stby/1_32204_810397891.arc
archived log for thread 1 with sequence 32205 is already on disk as file /archives/CMOVP/stby/1_32205_810397891.arc
archived log for thread 1 with sequence 32206 is already on disk as file /archives/CMOVP/stby/1_32206_810397891.arc
archived log for thread 1 with sequence 32207 is already on disk as file /archives/CMOVP/stby/1_32207_810397891.arc
archived log for thread 1 with sequence 32208 is already on disk as file /archives/CMOVP/stby/1_32208_810397891.arc
archived log for thread 1 with sequence 32209 is already on disk as file /archives/CMOVP/stby/1_32209_810397891.arc
archived log for thread 1 with sequence 32210 is already on disk as file /archives/CMOVP/stby/1_32210_810397891.arc
archived log for thread 1 with sequence 32211 is already on disk as file /archives/CMOVP/stby/1_32211_810397891.arc
archived log for thread 1 with sequence 32212 is already on disk as file /archives/CMOVP/stby/1_32212_810397891.arc
archived log for thread 1 with sequence 32213 is already on disk as file /archives/CMOVP/stby/1_32213_810397891.arc
archived log for thread 1 with sequence 32214 is already on disk as file /archives/CMOVP/stby/1_32214_810397891.arc
archived log for thread 1 with sequence 32215 is already on disk as file /archives/CMOVP/stby/1_32215_810397891.arc
archived log for thread 1 with sequence 32216 is already on disk as file /archives/CMOVP/stby/1_32216_810397891.arc
archived log for thread 1 with sequence 32217 is already on disk as file /archives/CMOVP/stby/1_32217_810397891.arc
archived log for thread 1 with sequence 32218 is already on disk as file /archives/CMOVP/stby/1_32218_810397891.arc
archived log for thread 1 with sequence 32219 is already on disk as file /archives/CMOVP/stby/1_32219_810397891.arc
archived log for thread 1 with sequence 32220 is already on disk as file /archives/CMOVP/stby/1_32220_810397891.arc
archived log for thread 1 with sequence 32221 is already on disk as file /archives/CMOVP/stby/1_32221_810397891.arc
archived log for thread 1 with sequence 32222 is already on disk as file /archives/CMOVP/stby/1_32222_810397891.arc
archived log for thread 1 with sequence 32223 is already on disk as file /archives/CMOVP/stby/1_32223_810397891.arc
archived log file name=/archives/CMOVP/stby/1_32196_810397891.arc thread=1 sequence=32196
released channel: prm1
released channel: stby1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/14/2013 01:11:33
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/archives/CMOVP/stby/1_32196_810397891.arc'
ORA-00283: recovery session canceled due to errors
ORA-00354: corrupt redo log block header
ORA-00353: log corruption near block 2048 change 1638686297 time 05/13/2013 22:42:03
ORA-00334: archived log: '/archives/CMOVP/stby/1_32196_810397891.arc'
################# What I did: ################################
Rma target /
RMAN>catalog archivelog '/archives/CMOVP/stby/1_32196_810397891.arc';
The I connect to target and Auxiliary again :Rman target / catalog rman/rman@rman auxiliary
and I run the last content of the failing memory script:RMAN> run
set until scn 1638816629;
recover
standby
clone database
delete archivelog
And The DB start the recovery Process and my Standby complete the recovery very weel with message "Recovery Finnish or Termintaed or Completed"
The I could configure Datagurd
And I check the process and the Log Apply was on and running fine, no gaps, perfect!!!!!
How !!! Just Cataloging an "Supposed Corrupted"archive log !!!!!!
If Any ideas, that ould be great to understand this.
Rgds
CarlosokKarol wrote:
Hi Gurus,
I've posted few days ago an issue I got while recreating my Dataguard.
The Main issue was while duplicating target from active database I got this errors during the recovery process.
The Restore Process Went fine, RMAN Copied the Datafiles very well, but stop when at the moment to start the recovery process from the auxiliary db
Yesterday I took one last try,
I follow same procedure, the one described in all Oracle Docs, Google and so on ... it's not a secret I guess.
The I got the same issue, same errors.
I read soemthing about archivelogs, and the Block corruption and so on, I've tried so many things (register the log... etc etc ), and than I read something about "catalog the logfile)
and that's waht I did.
But I was just connect to the target db.
contents of Memory Script:
set until scn 1638816629;
recover
standby
clone database
delete archivelog
executing Memory Script
executing command: SET until clause
Starting recover at 14-MAY-13
starting media recovery
archived log for thread 1 with sequence 32196 is already on disk as file /archives/CMOVP/stby/1_32196_810397891.arc
archived log for thread 1 with sequence 32197 is already on disk as file /archives/CMOVP/stby/1_32197_810397891.arc
archived log for thread 1 with sequence 32198 is already on disk as file /archives/CMOVP/stby/1_32198_810397891.arc
archived log for thread 1 with sequence 32199 is already on disk as file /archives/CMOVP/stby/1_32199_810397891.arc
archived log for thread 1 with sequence 32200 is already on disk as file /archives/CMOVP/stby/1_32200_810397891.arc
archived log for thread 1 with sequence 32201 is already on disk as file /archives/CMOVP/stby/1_32201_810397891.arc
archived log for thread 1 with sequence 32202 is already on disk as file /archives/CMOVP/stby/1_32202_810397891.arc
archived log for thread 1 with sequence 32203 is already on disk as file /archives/CMOVP/stby/1_32203_810397891.arc
archived log for thread 1 with sequence 32204 is already on disk as file /archives/CMOVP/stby/1_32204_810397891.arc
archived log for thread 1 with sequence 32205 is already on disk as file /archives/CMOVP/stby/1_32205_810397891.arc
archived log for thread 1 with sequence 32206 is already on disk as file /archives/CMOVP/stby/1_32206_810397891.arc
archived log for thread 1 with sequence 32207 is already on disk as file /archives/CMOVP/stby/1_32207_810397891.arc
archived log for thread 1 with sequence 32208 is already on disk as file /archives/CMOVP/stby/1_32208_810397891.arc
archived log for thread 1 with sequence 32209 is already on disk as file /archives/CMOVP/stby/1_32209_810397891.arc
archived log for thread 1 with sequence 32210 is already on disk as file /archives/CMOVP/stby/1_32210_810397891.arc
archived log for thread 1 with sequence 32211 is already on disk as file /archives/CMOVP/stby/1_32211_810397891.arc
archived log for thread 1 with sequence 32212 is already on disk as file /archives/CMOVP/stby/1_32212_810397891.arc
archived log for thread 1 with sequence 32213 is already on disk as file /archives/CMOVP/stby/1_32213_810397891.arc
archived log for thread 1 with sequence 32214 is already on disk as file /archives/CMOVP/stby/1_32214_810397891.arc
archived log for thread 1 with sequence 32215 is already on disk as file /archives/CMOVP/stby/1_32215_810397891.arc
archived log for thread 1 with sequence 32216 is already on disk as file /archives/CMOVP/stby/1_32216_810397891.arc
archived log for thread 1 with sequence 32217 is already on disk as file /archives/CMOVP/stby/1_32217_810397891.arc
archived log for thread 1 with sequence 32218 is already on disk as file /archives/CMOVP/stby/1_32218_810397891.arc
archived log for thread 1 with sequence 32219 is already on disk as file /archives/CMOVP/stby/1_32219_810397891.arc
archived log for thread 1 with sequence 32220 is already on disk as file /archives/CMOVP/stby/1_32220_810397891.arc
archived log for thread 1 with sequence 32221 is already on disk as file /archives/CMOVP/stby/1_32221_810397891.arc
archived log for thread 1 with sequence 32222 is already on disk as file /archives/CMOVP/stby/1_32222_810397891.arc
archived log for thread 1 with sequence 32223 is already on disk as file /archives/CMOVP/stby/1_32223_810397891.arc
archived log file name=/archives/CMOVP/stby/1_32196_810397891.arc thread=1 sequence=32196
released channel: prm1
released channel: stby1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 05/14/2013 01:11:33
RMAN-05501: aborting duplication of target database
RMAN-03015: error occurred in stored script Memory Script
ORA-00283: recovery session canceled due to errors
RMAN-11003: failure during parse/execution of SQL statement: alter database recover logfile '/archives/CMOVP/stby/1_32196_810397891.arc'
ORA-00283: recovery session canceled due to errors
ORA-00354: corrupt redo log block header
ORA-00353: log corruption near block 2048 change 1638686297 time 05/13/2013 22:42:03
ORA-00334: archived log: '/archives/CMOVP/stby/1_32196_810397891.arc'
################# What I did: ################################
Rma target /
RMAN>catalog archivelog '/archives/CMOVP/stby/1_32196_810397891.arc';
The I connect to target and Auxiliary again :Rman target / catalog rman/rman@rman auxiliary
and I run the last content of the failing memory script:RMAN> run
set until scn 1638816629;
recover
standby
clone database
delete archivelog
And The DB start the recovery Process and my Standby complete the recovery very weel with message "Recovery Finnish or Termintaed or Completed"
The I could configure Datagurd
And I check the process and the Log Apply was on and running fine, no gaps, perfect!!!!!
How !!! Just Cataloging an "Supposed Corrupted"archive log !!!!!!
If Any ideas, that ould be great to understand this.
Rgds
CarlosHi,
Can you change standby database archive destination from /archives/CMOVP/stby/ other disk?
I think this problem on your disk.
Mahir
p.s. I remember you before thread, too -
Qty in PO changable after GR and IR? How to block from changes?
Hi All,
After a the PO qty is fully received and fully invoiced, how come the system lets me change the PO qty afterwards and a Message (email) is processed and sent (with Changes to qty) to the vendor?
Is there a config that will block the PO qty being changed after the PO qty is fully received and fully invoiced?
What about a PO for Indirect procurement (without Material Master) for office supplies? Since there's is NO goods receipt, can the PO qty be blocked for changes after the PO is fully invoiced?
How to achieve the block to changes to PO qty/prices...etc after GR and/or IR?
Thanks in advance!HI,
You can grey out the quantity field and u can ask the users to have a PR mandatory and the Qty can flow from PR.
OR
You can define a Release stratergy that once the PO is released you cannot change the PO at any cost. this is controlled with the help of the indicators defined in the release stratergy.
Thanks & Regards,
Kiran -
MCRM_SETTINGS report cant change the already existing consumer
Hi Middleware gurus,
I have a problem in setting up of CRM middleware setup with ECC . The scenario is ECC is connected to CRM already and data is transferred, so as a result of that for all the objects in CRM the default consumer is CRM. And now due to some requirements , i want to connect this same CRM system to another ECC and so the requirement is to change this already existing default consumer to a new consumer as per the new ECC system.
SO, I ran the report MCRM_SETTINGS to change the consumer but the result says- the object is already a consumer.
So, now the question is - cant i over write the already existing consume to a new consumer...
Regards,
Neni.Hello Neni,
In case you want to connect 1 CRM to 2 ECC systems, you'd be following a MEP(Multiple Exchange Projects) scenario and not a MCRM setting so MCRM_SETTINGS won't be useful here.
Or do you want to disconnect the first ECC and connect a new ECC to the same CRM?
can you please clarify?
BR,
Rohit -
Why does my block diagram change when I copy my code to another system?
I am doing development work on a laptop on Win XP and using LabVIEW 2009 with service pack 1. When I copy the code to the target system, my block diagrams are changed and no longer fit the screen. Much of the code is spread out, mainly down. The target system is running Windows 7 and also has LabVIEW 2009, SP 1.
I notice that any constants that are clusters are expanded when copying the code to the other system. I've gone in and turned off the autosizing for these clusters but they are still expanded. I like to shrink them to a small size for saving space.
I've gone through and manually re-adjusted the block diagram on the target system, but when I copy it back to my development laptop, the same thing happens again. This is not an acceptable way to develop code and it has caused a real problem to proceed. I'm contracting this work and must develop this code offsite. Can anyone please help me with this? I can't keep restructuring my block diagrams every time I copy the code from one system to the other.Windows XP used Tahoma size 8 as its basic system font. When MS came up with Vista, they changed it to Segoe size 9. I'm not sure what Win 7 is, but I think it is the same as Vista. That font change, and certainly font size change seems to be the underlying cause for block diagrams changing their appearance. (And for front panel controls and labels as well.)
LV seems to use the Windows system font as its default font. Interestingly, it seems like the font sizes in LV are something like size 12, 13, 14, 15. I think a size 9 is equivalent to a size 15, but I'm not sure about the comparisons. (Check out this thread.)
There are a few things you can do to try to make one system look more like the other.
1. Go into the Windows screen settings. In Vista, right click desktop, Personalize. Window color and appearance. Open classic appearance properties. Try changing the color scheme from Windows Aero, to something like Windows Classic or Windows standard. They both use Tahoma 8.
2. Or same as Step 1, but go further into Advanced button. Pick on any option that uses font such as Menu, Message Box, Active or Inactive Title Bar and change the font there. I'm not sure which of the items that has a font setting is the key one.
3. LV uses 3 fonts called Application, System, and Dialog. I think each of those map to one of those Windows options, but I'm not sure which goes to which.
4. In LV, Tools/Options/Environment has a subsection called Fonts. Those 3 basic LV fonts are selectable there. There is also a checkbox for me which is checked and says to use default. If you uncheck that checkbox, a Font Style button becomes enabled. You go in there and you can choose fonts and sizes. And the Application, System, and Dialog fonts as well as all the usual fonts names (Arial, MS Sans Serif, Greek, ....) are selectable along with fonts sizes. Play around in there. The whole section is very confusing, and I have no idea how it works. I recommend going to this idea A better way to specify (default) fonts and putting in a vote. Also this idea, Fix font behavior between windows versions, platforms & executables, deserves some love.
5. Some of these settings can also show up in your LabVIEW.ini file.
FPFont = "0" 15
BDFont = "0" 13 (I think the "0" means app font, "1" means system font, and "2" means dialog font)
Also,
appFont="Tahoma" 13
systemFont="Tahoma" 13
dialogFont="Tahoma" 13
(And if necessary, put these in your built application's .ini file)
As you can see, there are a lot of different things going on and they also seem to conflict with each other. I starting stumbling on the block diagram issue between working on my app on XP at work and on my Vista machine at home about 6 months ago. I think my problem actually started with the front panel when I was trying to align labels, and use some arrow head decals on boolean buttons. I think I did the customization of buttons in a couple different ways (because I did some, came back later to do others, and couldn't remember exactly how I did it.) As a result some decals looked different than others when I changed machines. And I swear going from XP to Vista, or Vista to XP the problem got both worse ways rather than let's say larger one way, and smaller the other way.
Replying to your message is about as much to me trying to combine all the pieces of knowledge I've stumbled across over the past months and year as it is for trying to help you. Hopefully, this information gives you some places you can look at and play with. (I bet #1, would be a quick, easy way to solve your immediate problem, but I haven't really tried it myself to be sure.)
I hope someone from NI who has a better understanding than me about these font issues could jump in and correct any mistakes I made, or add anything I might have left out. What we really need is some sort of "nugget" or National Instruments white paper that really explains all of this in ways we can use rather than us stumbling around in the dark doing things trial and error to figure it out. Generally, any changes to the .ini files require you to shutdown LV and restart it to take effect which can take a couple minutes. And considering all the various combinations of things that can be done above, your talking about dozens of possible restarts, and sending .vi's between two different PC's with two different operating systems, before figuring these things out. -
Need to get a list of PSA tables and change log tables existing in a PC
Is there a standars table to look up all active DSOs and the change log tables associated to those DSOs?
and also Data sources and the PSA tables associated to that DS.
I need to get a list of PSA tables and change log tables existing in a processchain(whioch deletes the data in them time to time)how do I do this in a quicker way?
Thanks in advanceHi Ramya
Check RSTSODS table with filter of User App CHANGELOG ---> For change log tables -
Howdy SAP GURUS...
I am looking for a way to determine who (i.e. the user) that has deleted the blocking reason on the blocked invoice report (MRBR).
We would like authorised users in the business to be able to delete valid blocking reasons (i.e. price variance above tolerance) for blocked invoices. But we cannot find a report that display "who" has actually deleted the blocking reason.
What is your thoughts on dealing with suched blocked invoices?
Does a report exist for changes to this table?Hi,
Check with t.code: S_ALR_87012293
Regards,
Biju K
Maybe you are looking for
-
How can I set up email so I can send iPhoto without using a .mac account?
Hello! I am trying to send an iPhoto via email. Since I do not want to set up the .mac account yet, how do I correctly set the email send and receive perimeters? POP? I want to use my yahoo email. Thanks! Powerbook G4 Mac OS X (10.4.4)
-
Hi there, I have a Table of Contents web part which is great. Is there a way so it shows only top level sites and then one can expand or collapse any top level site to see/hide the subsites? As of now it shows HR Parent site - HR sub site 1 - HR sub
-
** Problem in opening a word document using DDE.App_Begin *
Hi All, I used this code in a when-button-pressed trigger in a button to open a word documnet: declare AppID PLS_INTEGER; filename varchar2(100); begin FILENAME := :FILE_PATH; -- :file_path has the full path to the word document foe ex. : D:\Cop
-
PLS-00435: DML statement without BULK In-BIND cannot be used
My requirement I am dynamically creating a staging table my_stg, and then populate it. Seems simple, but not sure why i get this error, create table gtest4(myid varchar2(10), mykey varchar2(10)); create table gtest5(myid varchar2(10), mykey varchar2(
-
IOS 4.2.1 Blank usage statistics
There seems to be a new bug in IOS 4.2.1 Usage statistics for usage and standby are lost when you power on the iPhone.