Block more than 8 URLs? SPI torrent blocking router available?
Are there ANY routers made by Linksys/Cisco that will allow me to enter more than 8 URLs per user for blocking??
I have just upgraded from DLink and I had over 60 blocked websites on the DLink. I came to cisco because I was told it's the best and no where did it say there was a limit on the device, none of the retailers could answer my questions.
I want to block guests when the kids have parties. Stop guests looking at porn or watching movies! not swearing or talk of sex like happens on Facebook. :-( grrr
I was also hoping to prevent torrents from being dowloaded!! I thought that's why you invest in such a good name router!!
Do I have to now buy an additional computer with better firewall software and run it 24/7 ??????? This is just stuipd. I should have bought a cheap Router for $30 if I have to use an extra computer and firewall software, what's the point!
The cost of runiing a PC 24/7 is not cheap surely! why spend so much money on a Router that has these limitations. Does Cisco actually design their products for Families? I have 5 kids here!
Very unhappy here!
If there is a better router model than E3000 that fixes these issues, please let me know, if not, PLEASE forward on my comments to the relevent product design area. Surley I can't be the only parent with these issues!!!!
My point is, I shouldn't have to rely on other 3rd party products to do what I consider to be mandatory.
Hell, even D Link has a better block list, how come they can think of it and Cisco is the supposed industry leader!
It just so happens that DLink can't do it to individual IP adresses and I dont want my 11 yr old on facebook like my 14 yr old.
If I had to go out and buy 3rd party applications like firewalls and computers just to get this thing to do what it's made to do which is be a bloody firewall and router then Cisco should make a $30 router in a cheap arse PC use other companies software that does work because obviously, they can't make theri own.
The whole reason for me buying Cisco in the first place is to not have to go and buy superior products to it. I was told it's the best out there for families and security when it can't even compete with a software firewall solution on a linux box.
If you have any voice in the Cisco development area, can you please pass my comments on and have them make a good firewall solution?? Parents want to protect their children, and they don't want to get fined by police or industry when their account is flagged for illeagle downloads from torrents or .mp3 sharing sites.
It may not even be their kids, perhaps a friend came over whilst parents were on holidays or there was a LAN party or maybe there was some sort of craze going on at school for a particular song etc...
C'mon, why is it so hard to think like a parent!!!
I met my partner with 3 kids and then had 2 of my own. Why didn't Cisco think about that! do they think all families start with no kids? have they seen the divorce rates??
What your suggesting is I go buy other peoples products becase they are superior and will do the job where as Cisco can't.
i'm not happy cause I spent $300 on this device when a stupid 2nd hand linux box, $30 router with firewall would have been cheaper and better. The problem is, I don't want to run a power hungry computer to do this 24/7 !! That's why i got the router labled as the best for!! I Wonder if Zonealarm make a firewall Router. is that the next suggestion?? Go to another competitor?
I will look and see if there is anything i can do to this purchase I have made to make it better. I don't know what Trend Micro offer, but if it's better than Cisco and won't cost me another frikken $300 for nothing, I'll do that.
NOT HAPPY
Similar Messages
-
How can I add more than five URLs to the address bar drop down list?
How many URLs can the Awesome Bar hold in the drop down list? I was showing five, but when I tried to add a sixth by cutting and pasting the URL in the address bar and clicking "Enter", it did not show up. Can the Awesome Bar hold more than five?
It is possible that you have an extension that sets this value to a lower setting than the current default of 12.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
Are there any way to copy or delete more than one url at a time
i have a lot of url and i want to copy them to another folder, for now i do it one at a time, so i am wondering can i highlight and cope more than one at a time, and i also want to do this in delete.
If i ever win a grammy. ill thank u...ok one last thing...is there a way to sort of consolidate tracks? sometimes there are a few...quite a few and some stuff could be on one but i need it to not cut out any of the other parts
-
Creating Interactive Files with more than one URL
Hello, here's my problem: I want to create more than one button instance that go to different URL address's. From the Adobe Video Workshop, I got the code:
interactive_test.addEventListener(MouseEvent.CLICK, buttonClickHandler);
function buttonClickHandler(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.adobe.com"));
This works fine with one button instance. When I copy and paste the code for another button instance, i.e:
butn1.addEventListener(MouseEvent.CLICK, buttonClickHandler);
function buttonClickHandler(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.adobe.com"));
butn2.addEventListener(MouseEvent.CLICK, buttonClickHandler);
function buttonClickHandler(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.adobe.com"));
I get 1021 duplicate function error. I think I understand in priciple what's wrong but don't know how to fix it. MyI knowledge of Action Script 3 is zero. What I need is sample code that works that I could copy and paste, with appropriate changes.
Thanks in advance for your help, Richarduse different function names or flash won't know which function to use:
butn1.addEventListener(MouseEvent.CLICK, buttonClickHandler1);
function buttonClickHandler1(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.adobe.com"));
butn2.addEventListener(MouseEvent.CLICK, buttonClickHandler2);
function buttonClickHandler2(event:MouseEvent):void {
navigateToURL(new URLRequest("http://www.adobe.com")); -
OK - I've managed to get this far without posting to the forum with this project, which shows that I'm actually beginning to grasp java.
I'm trying to get graphics to show up on JButton in jar files - I know that you're thinking that I should search the forums and I've already done that and found part of the solution - which is so create a URL object which uses the getResource method.
This works when I have one button - and works fine - when I have more than one for some reason the whole application crashes. If I have two buttons implemented through this way the first works fine, but the second causes the application to crash and I get:
Uncaught error fetching image:
java.lang.NullPointerException
at sun.awt.image.URLImageSource.getConnection(Unknown Source)
at sun.awt.image.URLImageSource.getDecoder(Unknown Source)
at sun.awt.image.InputStreamImageSource.doFetch(Unknown Source)
at sun.awt.image.ImageFetcher.fetchloop(Unknown Source)
at sun.awt.image.ImageFetcher.run(Unknown Source)My code is
if (letter=="a"){
URL urlA = JIEventFrame.class.getResource("alphabet_media/Angelfish.png");
ImageIcon picA = new ImageIcon(Toolkit.getDefaultToolkit().getImage(urlA));
jiEventOK = new JButton(picA); jiEventText = new JLabel ("a, Angelfish", JLabel.CENTER);}
if (letter=="b"){
URL urlB = JIEventFrame.class.getResource("alphabet_media/Baloons.png");
ImageIcon picB = new ImageIcon(Toolkit.getDefaultToolkit().getImage(urlB));
jiEventOK = new JButton (picB); jiEventText = new JLabel ("b, Balloons", JLabel.CENTER);}letter is a String which is passed from a preceding class which creates an instance of this one.
Any ideas why one would work and not two, even though they've got different identifiers ?
Thanks in advance.
adamMap pngs = new HashMap();
pngs.put("a", "Angelfish");
pngs.put("b", "Balloons");
// and so on
Your code which you were having a
problem then doesn't need to have 26 if-statements, it
should look more like this:
String pngName = (String)pngs.get(letter);
URL url = JIEventFrame.class.getResource("alphabet_media/" + pngName + ".png");
ImageIcon pic = new ImageIcon(Toolkit.getDefaultToolkit().getImage(url));
jiEventOK = new JButton(pic);
jiEventText = new JLabel (letter + ", " + pngName,
JLabel.CENTER);Okay - this is a neat looking piece of code and I'm really learning. Many thanks for this. However, I'm not sure what pngName will be in this instance - will it be "a" + "Angelfish" or will it be "a", or "Angelfish"? How are the two parts separated, if at all? I've read the API for HashMap, but it isn't all that clear. I'll scour the tutorials next. How does the String know that letter is the first element "a" and that pngName is "Angelfish"?
I want to have an ImageIcon called Angelfish.png and then another JLabel where I will show the text "a, Angelfish".
Also there is a smallish problem in that not all the graphics are png; I also have jpg, but I could fix that by reformatting them. However, it's not an ideal fix. -
Why can't I download IOS6 updateon my Iphone4. I have more than required 2.5GB storage available ?
There is a box under the IOS 6 software update. The box says "download and Install" but I can't highlight the box to activate it. Under that there is a sentence that says "update requires at least 2.5 GB of available storage. I have 9.6 available.
-
WRT54G: How do I specify more than 4 URLs & 6 keywords to block?
Hello,
The router's Access Restrictions function performs Website blocking by allowing the administrator to specify four URLs and six keywords to be blocked. How do I specify more four URLs and six keywords?
Thanks,
ChuckOn these kind of routers under Access Restriction,you can block 4 websites by URL Address...4 using Keyword and you can also block some application under Blocked Applications....If the application you want to block is not listed or you want to edit a service’s settings, enter the application’s name in the Application Name field. Enter its range in the Port Range fields. Select its protocol from the Protocol drop-down menu. Then click the Add button.
-
CNAME function available for more than one URL?
Hello!
I have successfully installed the CNAME funktion for ond URL to be used with an iWebsite.
Now I would like to create another iWebsite using a different URL via CNAME function.
Is this possible and if so how can I do it?
ThorgeNo it is not possible because CNAME forwarding can only be used ONCE for every MobileMe account.
If you want to link another domain name to another website, then you will have to use either masked or unmasked web forwarding.
This is all you can do, remembering that MobileMe will not be here after June this year, so you'll have to find alternative web hosting anyway - why not start looking now rather than using MobileMe? -
Can I create more than one URL link in a single Flash (SWF) file?
I created a simple SWF slideshow in Flash with 5 slides. I was able to link one URL to the whole file by adding an alpha button.
What I can't figure out is how to add a URL link to each slide. The SWF file i sused on a website and I would like to be able to click on a particular slide as it is playing to go the a site or page that applies to that slide.
Is there a way or code I can use to do this??
This is the code I am currently using for the button now.
ja_btn.addEventListener(MouseEvent.CLICK,mouseClick);
function mouseClick(event:MouseEvent):void
var request = new URLRequest("http://www.jakeandamos.com/");
navigateToURL (request,"_blank");
I am just learning this stuff so I can use your help, Thanks!You cannot duplicate instance names or function names, so you'll need to create unique names for each one that behaves differently. So you can only have one function named "mouseClick"... if you want to have another function to link somewhere else you need to create a new name for that function ("mouseClick2" would work)
There are alternate approaches, but for now this will be the easiest for you to deal with. -
Ipod wont connect to wifi if more than 2-3 feet away from router
I have a 32Gb 4th Generation Ipod Touch which until last week was working perfectly.
About 3 days ago I started having problems connecting to my home wi-fi network. If I sit within 2-3 feet of the router it finds it okay and will connect, but anywhere over that distance I get nothing.
All the other devices in my house, including another 4th Generation Ipod all connect okay.
I have tried rebooting the router and changing the wireless channel number, although I have always used the same channel number. I have also done a Network Reset and Full Reset on the 32Gb Ipod, but nothing has changed.
The Ipod is only 4 months old and was purchased from Argos.
Is there anything else I can do to try and resolve this or shall I just take it back for an exchange / repair?
Thanks in advance.Is there anything else I can do to try and resolve this
NO
or shall I just take it back for an exchange / repair?
If you have an Apple store nearby make an appointment at their Genius Bar.
Apple Retail Store - Genius Bar -
Our Verizon account has 10 lines and I figure we're paying over $7,000 a year, when I think of how much money total we have payed to Verizon only to be jerked around and around and lied too over and over again really does make me sick. 6 of these contracts have ended and 3 will be up in next couple months and 1 has a year left so the cancelation fees would not be that bad. And with the other big carrier I've heard it might be cheaper on monthly service. All I wanted from Verizon was for them to do whats right.
I Ordered
iPhone 6 16gb gray
iPhone 6+ 16gb gray
iPhone 6+ 64gb gray
iPhone 6+ 64gb silver
all on the same order. I finished at 3:19 am est and got a date of 10/14 even though all the phones except the 6+ 16 gb gray had 9/19. Got confirmation email at 4:56 will ship by 10/14 I got worried that all the phones would not ship till 10/14 and contacted verizon thru facebook messenger. They told me my phones would ship in the order received and not be held up by a phone that wasn't available in my order. And based on the time of my order she said 9/19 for the 6 and 6+ silver, 10/7 for the 6+ 64 gray , 10/14 for 6+ 16 gray. On Monday morning my status changed to 9/19:):) in the afternoon in changed to unknown. I called 611 and rep went thru all my phones with a time sheet she had and said i should get all but the 6+ 16 gray on 9/19, she said that one you had to order by 3:00 to get on 9/19. On Wednesday my status changed to 10/14 , called 611 again and this lady told me all my phones had 10/14 listed after them. She told me she didn't know what to tell me that Apple ships the phones and its out of Verizon's hands because they don't have the phones. then she told me to call Apple (and gave me the phone # ) and see if they ship preorders with more than 1 in a order when their available or wait till all are. I called them ( they laughed that Verizon had me call them) and they don't hold up orders . Called customer service back and guy said at least 10 times ....I ASSURE YOU VERIZON WILL NOT HOLD YOUR PHONES!!! i said of course they're not actually putting them in a box and waiting for all, they're sending them to other people who ordered after me. I asked him if my order could be separated/ rebuilt and do a (jump the line request) so i could get my phones when i should. He said there is no such thing at verizon....he has worked there many years and if there was he would know. Someone posted # to Internet orders so i called them Thursday morning, spoke to a very nice guy he said my phones that i should get i would and i should get an e-mail later that day and if i didnt get anything by 8:00 pm to call back. Before we hung up i asked if I didn't get anything did he know if they could cancel/separate/rebuild and do jump the line, he said they can do that and put me on hold while he spoke with a supervisor, he came back and said if nothing happened that day they would do that with my order. I got nothing, called Internet orders back at 8:30pm... went thru my history and asked them to do the rebuild. She transferred me to supervisor who REFUSED to rebuild my order, that is only for orders that have a technical error. She was also the first person from Verizon to tell me that they DO NOT ship orders in multiple shipments, they will only send when everything is available. She then said your order was given a delivery date of before 10/14 and that's when you'll get all your phones. I let her know that there is nothing about that confirmation that tells me that the phones that I ordered that had 9/19 deliver by dates would not be delivered then, 9/19 is before 10/14.Same thing happened to me!!! They made a shady business move and they should be ashamed. Placed a pre-order for an Phone 6 and an iPhone 6 Plus at 2 AM on the 12th and got my pre-order in line just like everyone else did that morning. The 6 said delivery by 9/19 and the Plus was already back ordered to 10/7 but that's fine, I expected the Plus to be harder to get anyway. Being that both phones were eligible it made sense to just place one order given this hasn't been an issue in the past. However, Verizon moved my iPhone 6 pre-order delivery to coincide with the back ordered Plus so they don't have to ship each phone separately!!! I have to wait for something on backorder while the other is ready so they can save on shipping cost. I expected the one that I pre-ordered IN TIME FOR A 9/19 delivery and waited my turn "in (on)line" like everyone else I should get that when it told me that in the checkout, THEN send the Plus when it becomes available. I even have the confirmation email that says "Deliver by 9/19"!!! Every company you order from sends you the backorder item when it becomes in stock, they don't wait and hold the entire order for it. WHAT A BUNCH OF CRAP!!!
-
Hi, how/where can I define more than one DNS in my wireless router (WRV54G)? Thanks!
Thanks, Mort. That's quite a limitation for a VPN unit.
-
Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help
Your above posted system details show outdated plugin(s) with known security and stability risks.
*Shockwave Flash 9.0 r999
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/
In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
http://java.com/en/download/faq/firefox_newplugin.xml
See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html -
I would like to know how can I delete emails from my email block have more than 8000? Thank you.
I want to say, delete the 8000 not one by one, or 50 in 50... Minimum of 200 by
200 -
Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks
Dear All,
I get the Following Error in the Essbase console when I try to Execute any CalcScript.
Error: 1012704 Dynamic Calc processor cannot lock more than [25] ESM blocks during the calculation, please increase CalcLockBlock setting and then retry(a small data cache setting could also cause this problem, please check the data cache size setting)_+
Please find the detailed output of the Statics of my Planning Applications Database and outline.
please help guys........
GetDbStats:
-------Statistics of AWRGPLAN:Plan1 -------
Dimension Name Type Declared Size Actual Size
===================================================================
HSP_Rates SPARSE 11 11
Account DENSE 602 420
Period DENSE 19 19
Year SPARSE 31 31
Scenario SPARSE 6 6
Version SPARSE 4 4
Currency SPARSE 10 10
Entity SPARSE 28 18
Departments SPARSE 165 119
ICP SPARSE 80 74
LoB SPARSE 396 344
Locations SPARSE 57 35
View SPARSE 5 5
Number of dimensions : 13
Declared Block Size : 11438
Actual Block Size : 7980
Declared Maximum Blocks : 3.41379650304E+015
Actual Maximum Blocks : 1.87262635317E+015
Number of Non Missing Leaf Blocks : 10664
Number of Non Missing Non Leaf Blocks : 2326
Number of Total Blocks : 12990
Index Type : B+ TREE
Average Block Density : 0.01503759
Average Sparse Density : 6.936782E-010
Block Compression Ratio : 0.001449493
Average Clustering Ratio : 0.3333527
Average Fragmentation Quotient : 19.3336
Free Space Recovery is Needed : No
Estimated Bytes of Recoverable Free Space : 0
GetDbInfo:
----- Database Information -----
Name : Plan1
Application Name : AWRGPLAN
Database Type : NORMAL
Status : Loaded
Elapsed Db Time : 00:00:05:00
Users Connected : 2
Blocks Locked : 0
Dimensions : 13
Data Status : Data has been modified
since last calculation.
Data File Cache Size Setting : 0
Current Data File Cache Size : 0
Data Cache Size Setting : 3128160
Current Data Cache Size : 3128160
Index Cache Size Setting : 1048576
Current Index Cache Size : 1048576
Index Page Size Setting : 8192
Current Index Page Size : 8192
Cache Memory Locking : Disabled
Database State : Read-write
Data Compression on Disk : Yes
Data Compression Type : BitMap Compression
Retrieval Buffer Size (in K) : 10
Retrieval Sort Buffer Size (in K) : 10
Isolation Level : Uncommitted Access
Pre Image Access : No
Time Out : Never
Number of blocks modified before internal commit : 3000
Number of rows to data load before internal commit : 0
Number of disk volume definitions : 0
Currency Info
Currency Country Dimension Member : Entity
Currency Time Dimension Member : Period
Currency Category Dimension Member : Account
Currency Type Dimension Member :
Currency Partition Member :
Request Info
Request Type : Data Load
User Name : admin@Native Directory
Start Time : Mon Aug 15 18:35:51 2011
End Time : Mon Aug 15 18:35:51 2011
Request Type : Customized Calculation
User Name : 6236@Native Directory
Start Time : Tue Aug 16 09:44:10 2011
End Time : Tue Aug 16 09:44:12 2011
Request Type : Outline Update
User Name : admin@Native Directory
Start Time : Tue Aug 16 10:50:02 2011
End Time : Tue Aug 16 10:50:02 2011
ListFiles:
File Type
Valid Choices: 1) Index 2) Data 3) Index|Data
>>Currently>> 3) Index|Data
Application Name: AWRGPLAN
Database Name: Plan1
----- Index File Information -----
Index File Count: 1
File 1:
File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.ind
File Type: INDEX
File Number: 1 of 1
File Size: 8,024 KB (8,216,576 bytes)
File Opened: Y
Index File Size Total: 8,024 KB (8,216,576 bytes)
----- Data File Information -----
Data File Count: 1
File 1:
File Name: C:\Oracle\Middleware\user_projects\epmsystem1\EssbaseServer\essbaseserver1\APP\AWRGPLAN\Plan1\ess00001.pag
File Type: DATA
File Number: 1 of 1
File Size: 1,397 KB (1,430,086 bytes)
File Opened: Y
Data File Size Total: 1,397 KB (1,430,086 bytes)
File Size Grand Total: 9,421 KB (9,646,662 bytes)
GetAppInfo:
-------Application Info-------
Name : AWRGPLAN
Server Name : GITSHYPT01:1423
App type : Non-unicode mode
Application Locale : English_UnitedStates.Latin1@Binary
Status : Loaded
Elapsed App Time : 00:00:05:24
Users Connected : 2
Data Storage Type : Multidimensional Data Storage
Number of DBs : 3
List of Databases
Database (0) : Plan1
Database (1) : Plan2
Database (2) : Plan3ESM Block Issue
Cheers..!!
Maybe you are looking for
-
How to Restore iPhoto Library from BackUp?
My iPhoto library has gone blank, although its trash has the 4,555 images. And all organization, albums, keywords, photo names, gone. Recently my backup storage, where library kept, went blank. I got a new backup, and a pro restored most of old data,
-
Java with Business Objects not Working under Lion 10.7.5
I had been successfully running Business Objects under Lion 10.7.5 and Safari 6 until this week. The recent changes in Java under Apple have bitten me. I installed Java SE7 Update 9 today, but it doesn't fix the problem. I receive the error report
-
Best practice for Web Dynpro for Java to connect to SAP HR
What is best way to connect Web Dynpro for Java application deployed in SAP portal to connect to SAP HR ? Is it good practice to connect to underlying SAP database ( eg oracle) directly to get the data or is there a better way ? This below article de
-
How to see the saved password in safari of iPad 3 ?
PLease help me how can I see the saved password in iPad 3 safari.
-
Load Balancing With Round Robin
Hi, I have two iAS instances, each on their own box, and one iWS instance running on a third box. I have setup the web connector to use round robin and added the server weights. I believe that is all that is to it to do simple load balancing with iAS