Block number applications
Good day B-Berry users. Im new to the boards, so excuse me if this has already been asked.
I have heard from a few semi reliable sources that , depending on the handset, some block number applications are available. Is there any truth to this, as I am in desperate need of some security from unwanted calls. Thanks for any help1!!!
Solved!
Go to Solution.
look at iCallManager and BlackandWhiteList
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Similar Messages
-
Webutil_host.blocking procedure blocking the application intermittently
we are using webutil_host.blocking procedure to open a word document and have the application blocked until word document is closed. It opens the word document fine but blocking the application intermittently. Since it was not blocking intially, I started debugging and tried recompiling the form. It is now blocking the application fine, with no change in the code. It is definitely not the recompilation that made the trick because I compiled the form many times earlier while I was working on other parts of the form. Please share your expertise if anyone had the same issue.
we are using Forms 10.1.2.0.2 with Webutil 1.0.6
-
I want to block gambling applications on my iphone as i have a gambling addiction
I want to block gambling applications on my iphone as i have a gambling addiction
If you look in Settings-->General--> Accessibility, you will see there is an option called "restrictions" or something like that.
Ask someone who knows you to set up a code unknown to you and select in apps to authorize only 4+, 9+, 12+ and 17+ apps, since gambling apps should be available to only 18+ -
How do I get my number to show up as a blocked number when I call
HOw do I get my number to show up as a blocked number when I call someone
I think you want to simply hide the caller ID and be anonymous, not "be a blocked number" because you wouldn't be able to call anyone.
Back when I did that, I dialed *70, waited for the next dial tone, and dialed normally. I forget which carrier that was. Verizon is *67 these days.
Search for "Verizon block caller ID" for example. Verizon has a page and I'm sure the other carriers do, too. -
How do I protect my Verizon blocked number when texting?
I was shocked to find that my Verizon iPhone blocked number was in fact revealed when I sent text to an Android user who was employing a little app refused by Apple named Mr. Number. I like to know that I am safe and protected and when and when I'm not. I like to have anonymity upon certain occasions when using my phone. I had always placed trust in Apple for ther supposedly having my best interests in mind as they control their world and the trade-off to us, their loyal consumers, was to expect a safe and well managed environment. I have found so many instances where this is not the case.
After finding that my blocked number was revealed to this Android user employing his Mr. Number app, I immediately did a search and ended up at the app store and downloaded everything I could find that promised to do a similar thing, though ultimately nothing did what Mr. Number does. I even paid for two or three of them and upon initial review, I found that not one actually even did what they claimed to do. I'll of course be spending more time with each to see if I've missed anything, but I have to say how very very dissappointed I am in Apple for not providing more security to its iPnone users when it surly must know what we are up against. Apple does in fact know about Mr. Number as after visiting their web site they state that "Apple doesn’t allow developers to build better calling and texting apps for the iPhone." I surly agree with this statement.
Apple! Please consider the vulnerability we have as you've not allowed us to protect our privacy sufficiently.
Are there any suggestions or resources, apps etc.., that I've not heard of? Any suggestions to making my phone more protected when it comes to my phone number and other information associated with it?
Many thanks in advance!jc.p wrote:
just assumed that I was being protected when using it. Not the case I find, by accident. So much for assuming...and not getting into the fine details with, I guess, Verizon as I pay them for the basic blocing service...or at least I think I pay...maybe ints included...
Caller number blocking { ie your number when you call someone } ONLY covers the CALL part of the service. There is NO way to block your phone number EVER when sending a text message. -
Is there a firewall that can block an application?
I'm looking for a firewall that can block applications.
The firewalls for linux that I've found using google and also the one I'm using now can not block an application. There used to be an option for iptables (-m owner --cmd-owner programname), but since kernel 2.6.14 they've removed this option for iptables.eric, when you say u want to block applications, do you mean you want to block some of your applications getting out, or illicit use of ports for someone to get in ?
if its the latter, it may be that the firewall rules regarding "accepted, related, established" cover this as when you make rules, whichever firewall application u use, you can drop any incoming connections that arent following the state matches in your ruleset.
if you are concerned about ports being open to accept certain programs data, go to www.grc.com and use Shields Up to check. its a long while since i used any of this as i have a hardware firewall/router now, so apologies for lack of detail.
iptables/netfilter help here -
Blocked number still getting through
How is a blocked number still sending me text messages?
I don't know. This is my first iPhone. Had number blocked through Verizon customer service Sunday but still receiving texts today. Showed blocked online but apparently also needed to block number directly on my iPhone. Should work now hopefully.
-
"Illegals parent number Application-defined or object defined error65171"
HI Experts,
I am trying to import a Chart of Account for a new company and I get this error message "Illegals parent number Application-defined or object defined error65171"
I have seen a couple of post on this topic but I can't pick out the exact thing I'm doing wrong. Can anybody please put me through?
If you can give me an email addres I can send the csv for so you can take a look, it format gets disrupted when I paste it here.
Waiting to Hear from you.
RegardsDear,
For your issue, If you are using non-segmentation account, please kindly check whether your
fatherAccountKey is empty or not, this column is mandatory field for non-segmentation account.
If you are trying to update chart of account with segmentation, please check the note 942939 below:
Symptom
When you try to update chart of account with segmentation, using the
standard template of DTW 2005, you will receive the error message
"Cannot find this object in B1 Application-defined or object - defined
error 65171.
Other terms
DTW; update; chart of account; SAP Business One;
Reason and Prerequisites
Possible reason:
1, Field 'Code' is blank.
In DI API Help file 2005 for OChartofAccount, it says that Field "Code"
is the Mandatory field in SAP Business One when Not Working with
Segmentation.
2, Field 'FormatCode'
The Account Segment Separator '-'.existed in 'FormatCode' field.
Solution
1, Field 'Code' is blank.
For updating existing chart of account with segmentation, This field is
mandatory. You must fill it with the account code of that account you
want to update. You can get the code of each account #_SYS00000000XX#
from OACT table. Otherwise, we cannot update it.
It is not covered in DI API Help file 2005.
2, Field 'FormatCode'
Please delete the Account Segment Separator '-'. For example, change
11005-000-00-11 to 110050000011. System will identify automatically.
Please make sure that the field is a Text format cell. You can change
the format cell by right click the cell.
Wish the information above could solve your issue.
Regards
Apple -
Iphone4s - because I use pass lock I cannot decline a call such as a blocked number. If I can't see who is calling then I don't want to answer it. But due to having my phone on lock - i can see its a blocked number but there is no option to decline. If i unlock my phone it automatically answers the call. Does anyone else have this problem or is there a solution I don't knnow about?
In the locked screen you can press the sleep/wake button once to silence to the call and twice to send it to voicemail.
-
i have an iphone 3gs, and i keep getting blocked number calling me (prank calls) im getting really fed up with it all now i have had 12 calls from the same person! i was just wondering if there is any way i could block this caller from calling me?
Contact your carrier and ask them.
-
How to block p2p applications(Bittorent like) with AIP-SSM-10?
Hi,
How to block p2p application using AIP-SSM-10 working with ASA5520?AIP is on promiscuous mode.
Thanks,
SivaThere are several signatures that detect p2p, for bit torrent there is 11020.0
Yahoo triggers: 5539.0, 11200.0, 11212.0, 11217.0 & 11219.0
etc..
Some are disabled by default though so please ensure you enable the ones that you need.
If you want to block these then you will have to use event actions that work in promiscuous setup for example request block connection and tcp reset. Please note that care must be taken when using these event actions.
For more information about the event actions please refer the link below:
http://www.cisco.com/univercd/cc/td/doc/product/iaabu/csids/csids12/idmguide/dmevtrul.htm#wp1069467 -
If I block a phone number and they try to text me, do they receive a reply text saying they are blocked? If not, what happens?
Thanks for the inquiry, LBGSSS123! Customers who set up blocks will receive no notification that a blocked number attempted to contact them, except for Multimedia Messaging Service (MMS) where they see the subject line if you used our call and message block feature http://vz.to/MqEgqB.
TamaraH_VZW
Follow us on Twitter @VZWSupport -
Blocked number coming through as text but...
I have blocked a number and the block is due to be renewed in March 2014. This morning, a text from the blocked number came through as a download. When I went to retrieve the download, I got a message from my phone stating that the download was expired and the text disappeared from my text log. I have a Galaxy S3. Please advise.
Tomcat5251,
We apologize if there was a message received on your end from a number you had blocked, this is definitely odd. I know it's important to have the block service working at all times and we definitely want to get to the bottom of this. We need additional information to determine the cause of this. Please accept my follow request and follow me back,then send me a Direct Message to further assist you.
AdaS_VZW
Follow us on Twitter at @VZWSupport -
ORA-19587: error occurred reading 16384 bytes at block number 1
Hi,
I am getting the following error after I run rman hot backup.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/11/2007 02:01:03
ORA-19587: error occurred reading 16384 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
Additional information: 1
Additional information: 1
Can anyone please advise. thanksPardon me for not providing all the information.
OS - Solaris 9 64bit
RMAN Script:
#!/bin/ksh
# Script Name: rman_proddb_hot_bkp.sh
# Version: 1.0 01-JUN-07
# This script takes online backup of the database
# Uncomment for tracing
set -xv
# ~~~~~ set the variables ~~~~~ #
ORACLE_HOME=/u01/app/oraprd/product/10.2.0/db_1
ORACLE_BASE=/u01/app/oraprd
ORACLE_SID=proddb
DATE_TODAY=`date +%d-%m-%y`
# ~~~~~ set the enviroment ~~~~~ #
HOME=/export/home/oraprd
LOGNAME=oraprd
export PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/ccs/bin:/usr/openwin/bin:/usr/local/bin:/usr/dt/bin
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/OPatch:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib
SHELL=/usr/bin/ksh
export HOME LOGNAME
export ORACLE_HOME ORACLE_BASE ORACLE_SID
export DATE_TODAY
LOG_DIR=/var/local/logs
export LOG_DIR
# ~~~~~ Check if output file exists ~~~~~ #
cd ${LOG_DIR}
touch ${LOG_DIR}/rman_${ORACLE_SID}.${DATE_TODAY}_hot_bkp.log
chmod 755 ${LOG_DIR}/rman_${ORACLE_SID}.${DATE_TODAY}_hot_bkp.log
LOG_FILE=${LOG_DIR}/rman_${ORACLE_SID}.${DATE_TODAY}_hot_bkp.log
export LOG_FILE
# ~~~~~ start RMAN hot backup ~~~~~ #
rman target / nocatalog log=${LOG_FILE} <<EOF
run {
sql "alter system archive log current";
host 'sleep 30';
crosscheck backup;
crosscheck archivelog all;
backup database plus archivelog tag "manual_hot_bkp_on_${DATE_TODAY}";
delete noprompt expired backup;
delete noprompt obsolete;
exit;
EOF
OS Disk space: df -h
Filesystem size used avail capacity Mounted on
/dev/md/dsk/d60 16G 4.0G 12G 26% /u02
/dev/md/dsk/d50 35G 25G 9.3G 73% /u01
/dev/md/dsk/d70 1.9G 1.3G 585M 70% /u03
/dev/md/dsk/d80 1.9G 1.3G 598M 69% /u04
/dev/md/dsk/d90 325G 77G 245G 24% /u05
/dev/md/dsk/d40 935M 210M 669M 24% /export/home
FRA is 32G and is 20G at this stage. I get an error when I try to delete obsolete;
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of delete command on ORA_DISK_1 channel at 09/12/2007 06:56:21
ORA-19587: error occurred reading 16384 bytes at block number 1
ORA-27091: unable to queue I/O
ORA-27069: attempt to do I/O beyond the range of the file
Additional information: 1
Additional information: 1 -
ORA-19599: block number 1985 is corrupt in archived log +FG/
Hi Team,
I couldn't take backup of the RAC database archivelog. Please help me
RMAN> BACKUP VALIDATE DATABASE ARCHIVELOG ALL;
Starting backup at 24-MAR-13
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=+DG1/kvxcprd/datafile/system.260.777756857
input datafile fno=00003 name=+DG1/kvxcprd/datafile/sysaux.268.777756857
input datafile fno=00002 name=+DG1/kvxcprd/datafile/undotbs1.263.777756857
input datafile fno=00005 name=+DG1/kvxcprd/datafile/undotbs2.264.777756983
input datafile fno=00004 name=+DG1/kvxcprd/datafile/users.267.777756857
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:25
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=2 sequence=17 recid=26 stamp=810915691
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 03/24/2013 14:37:11
ORA-19599: block number 1985 is corrupt in archived log +FG/kvxcprd/archivelog/2013_03_24/thread_2_seq_17.269.810915689
RMAN> backup archivelog all;
Starting backup at 24-MAR-13
current log archived
using channel ORA_DISK_1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 03/24/2013 14:39:52
ORA-19563: header validation failed for file
Thanks & Regards,
Edited by: 995796 on Mar 24, 2013 2:26 AM
Edited by: 995796 on Mar 24, 2013 2:27 AMRMAN> BACKUP VALIDATE DATABASE ARCHIVELOG ALL;
Starting backup at 24-MAR-13
using channel ORA_DISK_1
channel ORA_DISK_1: starting full datafile backupset
channel ORA_DISK_1: specifying datafile(s) in backupset
input datafile fno=00001 name=+DG1/kvxcprd/datafile/system.260.777756857
input datafile fno=00003 name=+DG1/kvxcprd/datafile/sysaux.268.777756857
input datafile fno=00002 name=+DG1/kvxcprd/datafile/undotbs1.263.777756857
input datafile fno=00005 name=+DG1/kvxcprd/datafile/undotbs2.264.777756983
input datafile fno=00004 name=+DG1/kvxcprd/datafile/users.267.777756857
channel ORA_DISK_1: backup set complete, elapsed time: 00:00:25
channel ORA_DISK_1: starting archive log backupset
channel ORA_DISK_1: specifying archive log(s) in backup set
input archive log thread=2 sequence=17 recid=26 stamp=810915691
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of backup command on ORA_DISK_1 channel at 03/24/2013 14:37:11
ORA-19599: block number 1985 is corrupt in archived log +FG/kvxcprd/archivelog/2013_03_24/thread_2_seq_17.269.810915689You can remove this log with command
rman> delete archivelog '+FG/kvxcprd/archivelog/2013_03_24/thread_2_seq_17.269.810915689';
Maybe you are looking for
-
How can I save an e-mail to documents on our macbook Air?
How can I save an e-mail to documents on our macbook Air?
-
Need to know the table for sales org and sales area of role Sold-to in CRM
Dear Sir, Our server is CRM 5.0, I would like to download the data from CRM , however, I would like to know the table name which keep the sales org and sales area of role Sold-to in T-code : BP . However, we can't find the actualty table. Please kin
-
How Adobe reader will access SAP PKI for digital signatures
Hello, I am using a ABAP report to upload signed PDF document and validating the signature. However signature which I am using is client side Signature and not the server side. I still hope that I would be able to get these signatures from document.
-
J1INCHLN - TDS amounts showing as zero
Hi Experts, While creating Remittance challan(J1INCHLN), it is showing tax amounts as below. During Invoice posting TDS amounts are properly calculated & posted. During J1INCHLN execution, it is taking appropriate open items from respective TDS A/cs.
-
Can not with the standart editor?
HI, I want to change the long field og a structure. But when I click on the modifiy button, appears a popup where advice that i cant modify with the standard editor. What happens?