Block outbound caller ID

Why can I not block my outbound caller ID for all calls on my Samsung Fascinate? Am I missing something? Even Samsung told me I had to contact Verizon?
Why?

While the option to block the outgoing may not be on the handset as an option or menu, you can still block the outgoing number. Here are your two options:
1) Dial *67 and the 10-digit number. Example: *678008881111>Call.
2) You can call customer service and have them permanently block your outbound caller ID. This is a free feature they can put on your line.
This is probably why Samsung directed you towards Verizon Wireless.
Let us know if you have any other questions. Happy posting!

Similar Messages

Blocking outbound calls

Is there a way to block outbound calls to a specific number on fios digital voice?

no, just inbound calls.

Blocking Outbound Calls by Area Code and Time Zone

I am looking to block agents from making outbound calls to certain time zones by area code. Can't quite get my head around how I can use route filters with time schedules. Any help would be appreciated.

Create the route patterns for those area codes and then configure one which allows the calls, and another one that blocks the calls, use TOD to enable/disable them as required.
HTH
java
if this helps, please rate
www.cisco.com/go/pdihelpdesk

Adding *67 to all outbound calls NOT in my contacts?

Sorry if this is a redundant question, I could not find an answer on a search...is there any way to either block caller ID, or automatically insert a *67 when calling numbers NOT in my contacts? Thanks.

I know I can do that, but would like to have some way to do it automatically. I use my phone for both personal and work, and customers I call are not in my contacts, so it would be extremely helpful to have a way that when I call a number that's not in my contacts, that it automatically inserts a *67, or some other way to blcok outbound caller ID. I think the blackbery can do it, I was just curious if the iPhone can...but it sounds like it's not an option.

DTMF doesn't work for outbound call

We currently using UC520 and having strange problem. When we call through SIP for outbound call DTMF tone is not transmitting. and if I press multiple numbers with longer duration, It makes continuous tone on the other hand.
My current dialpeer uses DTMF relay RTP- NTE. I will attach sh run and debug ccsip message file. please help me this is being quite critical.

Seems like your SIP Trunk Service provider is not getting the RFC2833 packets or not interpreting them correctly.
I see on the log that you pressed 1, 2 & 3 and the UC520 sends all these digits out (each digit will have 7 packets - this post explains how to read this debug - https://www.myciscocommunity.com/message/14045#14045). So I know its not the UC520 - below is a snip for digit 1
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B86 timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1      Pkt:04 00 00 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B87 timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:04 00 00 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B88 timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:04 00 00 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B89 timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:04 01 90 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B8A timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:84 03 20 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B8B timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:84 03 20 >>
Sep 10 16:26:26.114:          s=DSP d=VoIP payload 0x65 ssrc 0x15FE9166 sequence 0x4B8C timestamp 0xBCB7190A
Sep 10 16:26:26.114:          Pt:101    Evt:1       Pkt:84 03 20 >>
In terms of next steps:
- Is there any router or NAT or firewall device between the UC520 WAN interface and the SIP Trunk service provider? If so maybe good to check if you can bypass this device or if this device blocks RFC2833 packets
- Ask the SIP Trunk SP what they see on their end for the RFC2833 packets - you can send them a wireshark capture off the UC500 WAN port if that is more convincing than a debug log. Who is the SP by the way?

Cisco Jabber for Windows in Extend and Connect mode and making outbound calls

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

Hi guys,
I've set up Cisco Jabber for Windows to use Extend and Connect to control a remote PBX endpoint. I've configured the required CTI-RD device, remote destinations, associated the users to the line and added the devices to end-user controlled device. The extend and connect part is working flawlessly without any issues. I'm able to receive inbound calls on the remote PBX endpoint and control the call (hold, resume, transfer etc.) using the Jabber call window that pops up.
However, I'm unable to make any outbound calls via the Jabber client when in extend and Connect mode. Reading the Extend and Connect guide, I need to configure Dial Via Office (DVO) Reverse. So when the user initiates a Dial-Via-Office reverse call, CUCM calls and connect to the Extend and Connect device (CTI-RD). CUCM then calls and connects to the number the user dialled and finally connects the two call legs.
After attempting to configure DVO-R for Jabber for Windows in Extend and Connect mode following the CUCM feature services guide, i'm unable to get any outbound calls working. From RTMT, i am receiving the following Termination Cause Code: (27) Destination out of order. What i also notice is that there is no calling number for that trace either. I would've thought that the calling party would've been the Enterprise Feature Access (EFA) number.
Has anyone got this working or can provide some guidance?
Thanks.

I am recieving calls from a solicitor. Show up as no caller Id. I want to block all calls that do not show caller Id. Can I do that? I am on the do not call list

How do I block all in coming calls that do not show on my caller Id. Phone says "no caller id" This particular call is from a place selling septic tank cleaner. They leave an automated voice mail. They are calling me over and over. I am on the national do not call list but that's no help. Because the caller id doesn't show anything I can't even report them.
I remember in the past calling a number and before my call would go thru I would have to enter my phone number so the party I was calling knew who was calling them. That is what I want to do. I want to block all calls from "no caller id" "number unavailable" Just FYI my phone is an IPHONE 5 and I am on Verizon.
Any help would be appreciated.
Thanks

itbitybob, good day!
Thank you for taking the time to reach out to us today. I know how frustrating it can be getting phone calls from "no caller id" numbers. We do have an option that is called Family Base that will allow you to block unknown numbers, private numbers, or caller id. This link will provide you with the full details of this option. http://vz.to/1gIklla I hope this is able to answer your question. If you have further questions please feel free to reach back out to us at any time.
KevinR_VZW
Please follow us on Twitter @VZWSupport

How can I block 'no caller id' calls from contacting me?

Over the last couple of days someone has got a hold of my number, and has been calling me with a private number. I want to know if there is a way I can block all calls on my phone that come from a private 'no caller ID' number, and only allow ones that have a caller ID through. I have tried contacting my service provider Telstra which they said the most they can do is put me on the do not call register (which doesn't help my situation at all, as the person isn't a telemarketer). Does anyone have any ideas about how to fix my problem?
Thanks.
(I have an iPhone 5 iOS 7.1.1 and my service provider is Telstra Australia)

There is no Third Party App you can load onto an iPhone that will be allowed to take over your iPhone's Phone without jailbreaking your device (which cannot be discussed here nor would I ever recommend doing it).
One feature you can use is the Do Not Disturb feature. You can set it to allow calls from your Favorites then add all of your people to your favorites, but that is not quite what you are asking for.

Automatic navigation after "END" button depending on in- or outbound call

Hi all.
the requirement is:
In the case of inbound calls - the agent starts working on an item of the inbox and clicks on "END" when finished - the navigation should automatically bring him back to the inbox.
But if he starts with the account identification (outbound calls) then he should automatically jump back to account identification screen when clicking on "END".
I already got the Intent driven interaction working according to these steps. But now the navigation brings me ALWAYS back to the inbox.
1) Define a rule policy in the Rule Profile for context "Intent driven interaction":
If
Current Event Equals InteractionEnded-Interaction ended
Then
Navigate To ( Navigation Object type:Action = IC WebClient - Inbox:Display )
2) Release the rule using the "more" button and clicking on "relase draft rule" (the icon changes from yellow to green)
3) On the top level of my new policy I assigned my business role and the event that is being used (InteractionEnded).
4) I check business role customizing: function profile "INTENT_DRIVEN_INTERACTIONS" is assigned to "DEFAULT". Note: The intent driven profile "DEFAULT" is assigned to the service mgr. profile "IDI_DEFAULT".
Doing these changes my system now always jumps to the inbox when I click on the "END" button.
The problem seems to be that I am not able to figure out how to use the currentInboxItem as part of my rule policy.
I added a line in my rule for the currentInboxItem checking if the currentInboxItem is not-equal to "blank". This seems not to work. I guess I must rather check if currentinboxitem is "bound" or against a field of the item. But I don't see how to do this.
Has s.b. any idea how to get this work? Or on other ways how to get this work?
Does s.b. know how to debug when a rule is checked by the system?
Thanks & Regards,
Thorsten

Hi Paul,
I defined the execute method in the following way.
You can see below that lo_activity is defined in the following way:
lo_activity      TYPE REF TO if_bol_bo_property_access,
CURRENTINBOXITEM' is a standard object of the global data container which gets filled when an inbox item gets selected.
'ZCURRENTINBOXITM' is the repository object of the context ICRule and I fill the parameter for the process type.
Hope this helps.
Regards, Thorsten
METHOD if_crm_smf_service~execute.
fill attributes for currentinboxitem
see implementation example in class CL_CRM_IC_F_G_TRANS
DECLARATION -
DATA :
lv_string        TYPE        string,
lo_bdc           TYPE REF TO if_crm_ui_data_context,
lo_activity      TYPE REF TO if_bol_bo_property_access,
lo_fb            TYPE REF TO cl_crm_smf_fact_base,
lv_entity        TYPE REF TO cl_crm_bol_entity,
lv_rel           TYPE REF TO cl_crm_bol_entity,
lv_factbase      TYPE        string.
FIELD-SYMBOLS :
<lv_date> TYPE sydatum,
<lv_time> TYPE sytime.
CODE -
TRY.
      CALL METHOD super->if_crm_smf_service~execute
        EXPORTING
          session            = session
          service_properties = service_properties.
    CATCH cx_root.
ENDTRY.
lo_bdc = cl_crm_ui_data_context_srv=>get_instance( ).
get entity activities
lo_activity ?= lo_bdc->get_entity( 'CURRENTINBOXITEM' ).
prepare the nodes
lo_fb = session->get_factbase( ).
IF lo_activity IS BOUND.
    TRY.
      get only one order objects
        lv_string = lo_activity->get_property_as_string( iv_attr_name = 'CRM_GUID' ).
        lv_entity ?= lo_activity.
        lv_rel     = lv_entity->get_related_entity('BTOrderHeader').
      CATCH cx_root.
    ENDTRY.
    IF lv_rel IS BOUND.
      TRY.
          CLEAR lv_string.
        curr.inboxitem filled
          lv_string = 'X'.
          CALL METHOD me->set_fb_attr_by_id
            EXPORTING
              id    = 'ZCURRENTINBOXITM'
              value = lv_string.
        process_type
          CLEAR lv_string.
          lv_string = lv_rel->get_property_as_string( iv_attr_name = 'PROCESS_TYPE' ).
        create a child node and add the value
         lo_node1->set_attribute( attrib_name = 'BT_PROCESS_TYPE'
                                  attrib_value = lv_string ).
          CALL METHOD me->set_fb_attr_by_id
            EXPORTING
              id    = 'ZCII_PROC_TYPE'
              value = lv_string.
        CATCH cx_root.
      ENDTRY.
    ELSE.
      CLEAR lv_string.
        not filled
      lv_string = space.
      CALL METHOD me->set_fb_attr_by_id
        EXPORTING
          id    = 'ZCURRENTINBOXITM'
          value = lv_string.
    ENDIF.
get next BTOrderHeader
   lo_activity = bdc->activities->if_bol_bo_col~get_next( ).
ENDIF.
lv_factbase = lo_fb->get_factbase_as_string( ).
ENDMETHOD.

Blocking ole call

Is there a way to do a "blocking ole call", i.e. making the calling code stop until the ole-application has exited? I start Word and load a document and then do stuff the file after the user has exited.
I tried using a blocking host command with callback on the document but it had an annoying cmd windows always visible and I would like to avoid digging into the registry to find the word executable.
BTW: what is the difference between OLE2 and CLIENT_OLE2?

client_ole is the implementation of OLE interaction
in WebUtil. When moving your apps the Web, all
previous client-server ole calls would occur on the
server. With attaching WebUtil and a simple search
and replace action you can make it work on the Web
then. I am misunderstanding something or aren't the 9i/10g OLE2 calls already happening on the client? At least the stuff I have tried with OLE2 pops up the application on the client and not on the AS-machine.
From teh top of my head, I think that the host
command in WebUtil allows you to do host command
calls on the client without popping up a DOS window.Yes, but the problem is that i need the window (I run the filename and let windows take care of the rest through extension association), but I would just like to make it more invisible to the user.
-Nik

Conversion error in JCo outbound call

hi all
     i am working on making OUTBOUND call from SAP using JCo,
     our SAP system is Unicoded and i am refering Jco example 5 from JCo2.1.8 demo.
    i am able to make connection successfully , but while running test ABAP program for testing connection, i am getting Short dump error headed :
              Conversion error "ECHOTEXT" from character set 4103 to character set 4102
A conversion error occurred during the execution of a      Remote Function
*Call. This happened either when the data was received *      or when it was
*sent. The latter case can only occur if the data is sent from * a Unicode
system to a non-Unicode system.
The current program had to be terminated because of an
error when installing the R/3 System.
my ABAP prg. is this :
REPORT z_jco_test.
PARAMETERS: requtext LIKE sy-lisel.
*ECHOTEXT LIKE SY-LISEL
**"              RESPTEXT LIKE SY-LISEL
DATA: echotext type SYLISEL,
      resptext LIKE sy-lisel,
      rfctest TYPE TABLE OF rfctest,
      wa_rfctest TYPE rfctest.
wa_rfctest-rfcdata1 = requtext.
wa_rfctest-rfcdata2 = 'Hello World'.
APPEND wa_rfctest TO rfctest.
CALL FUNCTION 'RFC_PING'
DESTINATION 'JCO'.
*CALL FUNCTION 'STFC_CONNECTION'
* EXPORTING
*    requtext       =
** IMPORTING
**   ECHOTEXT       =
**   RESPTEXT       =
CALL FUNCTION 'STFC_CONNECTION'
DESTINATION 'JCO'
EXPORTING
    requtext = requtext
IMPORTING
    echotext = echotext
    resptext = resptext
TABLES
    rfctest = rfctest.
WRITE: 'Echo Text: ', echotext.
WRITE: 'Response Text: ', resptext.
LOOP AT rfctest INTO wa_rfctest.
WRITE: / 'rfcdata1: ', wa_rfctest-rfcdata1.
WRITE: / 'rfcdata2: ', wa_rfctest-rfcdata2.
ENDLOOP.
i have made RFC connection unicode yes.
please guide me

Helo!
We have a similar problem here. Could you please explain your solution in a bit more detail ?
Thanks in advance,
Markus

Outbound call not working for Common Area Phone

Hi,
I have configured Common area phone and i am not able to make the outbound call. I have grant the conference policy. I have grant the voice policy.
client policy is default
How to troubleshoot the issue with outbound calls?
INBOUND call is functioning fine
Thanks
jitender

You can change the dial plan with my tool :)
https://gallery.technet.microsoft.com/Lync-2013-Common-Area-57bc4ff1
But good call, normalization rules may be off due to default global dial plan.
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications
This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

IPhone Safari block all calls

iPhone Safari block all calls
When i goin to internet in Safari or AppStore at iPhone, people dont colled me..
Internet(1) + phone talk(2) = only (1) or (2)!
I buy iphone becose i ned internet and i must every minute talkin by phone, when people call to me
But iphone dont work as telephone when i use Internet!
I`m from russia, my mobile operator MTS
Letter from MTS operator:
You may use your iphone only for internet surfing or only use as phone at one time
iPhone is innovation device of Class B, becouse calls and internet you may use only as 1 and 2... but no 1+2 at once time
iPhone not device of Class A, and its problem of Apple, who create iPhone,
sorry but we dont help you.
People! please help me! =) Pleese>>>
Say.. When you in Safari, you recieve calls?
Its really problem of iphone or its problem of my mobile operator? (russia, MTS)
Thanks

Thanks for info.. =)
In russia 3G is comin, in my region 3G and EDGE coming soon.. after NewYear =)
Now in my region work only gprs... =)
but 3g is coming..
SO my operator say, that iphone is a B class phone and its work only with voice only with internet... and dont say about 3g work graet with voice and internet..
thanks very much =)
Message was edited by: stek

Block Unknown Call / SMS

Everything that I have read suggests the you cannot block individual 'spam' calls or text .. is this is the case, it's not acceptable.
I have a Blackberry Z30 .. there MUST be a way to block individual calls or text. You can on other makes of phones so why not a Blackerry Z30. You can block all calls, but that's a little overkill.
I have been a loyal user of Blackberry phones over the past 6 years, if this cannot be resolved soon, when my current contract is up, I will be switching to another make ..
Please advise ..
Thanks

In your BlackBerry World, check out Call Blocker Pro
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Is there an app for blocking cell calls

Is there an app for blocking cell calls?

There is not. Look to your right under "More Like This" for related discussions.

Block outbound caller ID

Similar Messages

Maybe you are looking for