Block plannng for non-configurable products

Hi ALL,
I wish to create blocks on a production rsource as follows,
class- chemistry
characteristics- chem1, chem2, chem3,chem4
when PPDS plans for products with chemistry chem1, the planned orders should be created in the block chem1 and so on, so that similar chemistry products are planned together in the time axis
I wish to know if this type of planning is possible. I welcome everones inputs.
Thanks

Hi Vardev,
The planning in PPDS happens as per the demand qty and date.
The demand checks the product characteristics and starts
assign in the capacity blocks that you have defined in the block
basis definition and assign for the material class.
Say for eg, for a daily bucket of 100, let us say there is demand of
25 in chem1, chem2, chem3 and chem4 for the material class
chemistry, each 25 will get occupied in their blocks at a
stretch.
Say another eg, for a daily bucket of 100, if there is demand for
10 for chem1, 15 for chem2, 0 for chem3, 15 for chem4, then
each block will get assigned with the capacity demand accordingly
and since there is no demand for chem3 characterisitcs, chem4
will get pushed to the previous buckets
Hope it is clear now. Please confirm
Regards
R. Senthil Mareeswaran.

Similar Messages

ATP Check(in SCM ) for a Configurable product during sales order creation.

HI Guru's,
our client is implementing GATP(SCM) and Variant Config(ECC 6.0)
when a Sales order is created for a Configurable Product of 20" width and 10" diameter, and with some other Characteristics, He wants the ATP check to be done for that particular product with specific width and diameter.
Is there any possible solution?
Plz let me know....
Thanks
jk

Hi
Assuming that you know how to configure Variant configuration in R/3, ATP check in R/3 I will list down the ATP set up and setup relevant to Variant Configuration in SCM.
APO side.
1.Check Definition of Characteristics and Class system:
SAP APO - Implementation Guide -> SAP Advanced Planner and Optimizer (SAP APO) -> Basis Settings -> Define Class System (CDP or Classical Characteristics)
2. Check Mode ( use same requirements class used in R/3 mat master)
SAP APO - Implementation Guide -> SAP Advanced Planner and Optimizer (SAP APO) -> Global Available-to-Promise (Global ATP Check) -> General Settings -> Maintain Check Mode
3. Create a check instruction with your check mode and AE(make to stock SD order) combination and set up the desired ATP check method in it.
SAP APO - Implementation Guide -> SAP Advanced Planner and Optimizer (SAP APO) -> Global Available-to-Promise (Global ATP Check) -> General Settings -> Maintain Check Instructions
4. Check Control with your ATP group and AE business event.
SAP APO - Implementation Guide -> SAP Advanced Planner and Optimizer (SAP APO) -> Global Available-to-Promise (Global ATP Check) -> Product Availability Check -> Maintain Check Control
5.Maintain suitable scheduling horizon in SAP APO - Implementation Guide -> SAP Advanced Planner and Optimizer (SAP APO) -> Supply Chain Planning -> Production Planning and Detailed Scheduling (PP/DS) -> Global Settings -> Maintain Global Parameters and Defaults -> Planning Tab
5. Don't forget to CIF classes and charecteristics
6. Maintain check mode, ATP group, PP/DS horizon, planning procedure 3 in product master.
If you want to trigger production you have to maintain planning procedure 5 in product master and appropriate settings for MATP like configure check instructions, production type Mutli level ATP. you have to have valid BOM and Routings, CIF PDS for the material, maintain production version in material master, etc. That will be quite a complex scenario again.
This should give you proper results. Hope this helps.
regards
Mohan V R chunchu
Edited by: Mohan V R Chunchu on Jan 30, 2008 6:17 AM

How to config JMS queues for non-AQueue products? Only config files?

Assume I have the requirement NOT to use Oracles built-in Aqueue JMS provider but use another (external)product like:
Apache ActiveMQ, JBossMQ, IBM MQseries,... instead.
Can I config these JMS products through OC4Js web browser config web pages as well or am I forced in such cases to use configuration through XML config files?
How do I tell OC4J NOT to use internal JMS Aqueue queues but use other JMS product?
Peter

"lilian zhu" <[email protected]> wrote:
>
Hi,
i am having a admin server running on port 7001 for servlet1 and managed
server
running on port 8001 for servlet2. how can config the httpd.conf to make
the apache
web server recongize both uri path?
i tried <IfModule mod_weblogic.c> WebLogicHost localhost WebLogicPort
7001</IfModule>
and <IfModule mod_weblogic.c> WebLogicHost localhost WebLogicPort 8001</IfModule>,
only can recongize port 8001.
i also tried WebLogicCluster localhost:7001,localhost:8001, doesn't work.
i would like to know, for my case, will the clustered server work, how
can i make
this working for non-clustered servers?
Thanks.
Lilian
Hi,
we have the same problem. We are running two non-clustered weblogic servers and
we want to configure only a failover
with the plugin.
We contacte the bea support but we haven't find a solution.
Greetings
Hans.

Promotions at configuration option for a configurable product

Is it possible to apply promotions to a specific configuration options in a Configurable Material?
For example, Material A is a configurable product. It has several configuration options with charges attached at configuration option (i.e. Characteristic value level) through variant conditions. Now if we want to give a promotional discount for a specific configuration option, Is it possible through standard SAP Promotions and Sales Deal functionality?
Base Price of Material A: $1000.00
Confuguration option X : $200.00
Promotion on configuration option X : 10% off of Config Option X charges (i.e. -$20)
Net Price of Material A with Config option X should then be:
$1000 + ($200 - $20) = $1000 + $180 = $1180
If it is possible to handle this kind of promotions in SAP ECC, please suggest the config steps involved to include variant condition type in the Promotions.
Thanks in advance
SCB
Edited by: Sreenivasa Bahudodda on Jan 19, 2009 1:25 AM

Hi,
Have you checked the downloaded knowledge bases in the CRM tables - COMM_CFGKB or COMM_SCEKB?
If you don't find the entries in one of the above tables (particularly in COMM_CFGKB), then you have an issue regarding the download of SCE.
Please let me know you answer, so that I will try to help you to solve the download issue
<b>
Do not forget to reward if it helps,</b>
Regards,
Paul Kondaveeti

Config missing, ERROR in CRM for a configurable product.....

Hi friends,
I have a configurable product in CRM, when i try to create a quotation in CRM with that, im getting error as "Configuration missing".
I am not sure why this is coming. I checked the same product in ECC, and when i try to create a quote in Ecc with the same product, im getting no errors.
And more over, in the items, im getting items, like 100, 101, 102, 103.
I want to solve this error in CRM, and create a qoute successfully.
Could anyone give me some guidelines or steps to solve this issue.
I am just an ABAPER, and i dont have any fucntional person at place.
I really appreciate your help on this regard.
Thanks in Advance,
Niraja.

siddharth,
thanks for ur help.
Now in the Qutation item configuration tab, i can see the configuration UI with all the drop downs in that. But it has got a message on top " The configuration contains conflict".
when i click details, the following msg is there.
Handle Conflict
Conflicting Options To top
CONFIGURATION NOT ALLOWED
Due to configuration conditions an option is excluded Hide Explanation
FOR THIS DEALER CODE (automatically assigned)
Solve conflict To top
Retract one of the conflicting options:
Retract selected option "
I couldnt understand what is missing.
what i did is, in the ipc xcm settings, i created a scenario, and a jco. its working fine. I updated PROP and URL tables with those scenarios and url.
is there any else i have to do?
Also i have created user exits for almost all formulas. Few are giving errors in the conditions tab? is this because of this?
Could anyone help me on how to proceed.I am checking all the settings once again.
I really appreciate your all help.
Thanks in advance.
Niraja.
Edited by: Niraja on Aug 4, 2008 7:33 AM

Block ActiveSync for non Intune managed devices

Hi!
is it possible to block Active Sync for devices, wich are not managed by Intune? (Active Sync Quarataine, wich will auto-allow MDM devices?). It would be great to take a Hand over the byod devices...
Bye
André

Thanks. Unfortunately 2 EAS policies will not work for me, because EAS policies are set on users/mailboxes. This would result in devices not secured by neither Intune nor EAS.
I believe this is a shortcoming in Exchange/SCCM/Intune. There should be an option where an administrator can define whether EAS or Intune policy is leading.
Do you know some place to write feedback to the Intune / SCCM development team?
If you found this post helpful, please “Vote as Helpful”.
If it answered your question, please “Mark as Answer”.
Christian Gude | www.itexperience.net

Lightroom help offers help for non-Lightroom products

HI,
When I open Lightromm and either hit F1 or use the menu to access help. A box opens titled Adobe Community Help. I type in a help topic, oh say "Curves", and get a bunch of results on the left. I click on the first one and I get suggestions for Photoshop 6. If I try and limit search to a single product it offers only Lightroom 3. How can I limit Lightroom 4 help to only Lightroom 4? I don't want suggestions for Photoshop or other Adobe products I don't even have those other products installed.
thanks

This is what I see in Lightroom 4 help - which might be similar to what the OP is getting?
I can view the LR4 help pages, and follow links within there - but I can not use the side search function in the way (presumably) intended. This computer has LR 3.5 and Photoshop CS5 installed as well as LR 4.1

How to do PGI for non saleable products

Hi friends,
Pls help me in this scenario..
we have to dispose scraps which are non saleable. what is the procedure to create a document so that we will be able to move the scraps out of the company.
Thanks in advance

1) Material type should be FERT with no MRP views but to maintain Sales, Accounting and Costing views.
2) Seperate pricing procedure for scrap sales with a condition type for Tax Deducted at Source
3) Seperate storage location should be created for scrap yard
4) As and when scrap is generated, create a sale order based on the available stock, do delivery and invoice.
thanks
G. Lakshmipathi

Can I get a refund for non-compatible product?

Have purchased FIFA 12 for my Ipod touch only to find that it is not compatible with the version I have.
How do I return and get a refund?

Probably not

Non-serialized products from ERP to CRM Ibase

Hello SDN community,
currently I am working with CRM 2007 and ERP 6.0.
I am trying to find a solution for the following scenario:
I create a Sales Order in ERP with configurable & non-serialized materials.
I want to bring exactly this materials including configuration into the CRM IBase automatically during the SalesOrder process
(very similar to the SAP standard equipment approach). Is there a SAP standard way???
I already know how this works for serialized materials (aka equipments) and I debugged the
system (especially function group IB_CRM_API with all its FMs) but I cannot find a really easy, straight forward
approach to accomplish my solution...
I have several options in my mind, but what would be the best one?
1) create my own bdoc (I could not find an standard one) for non-serialized product similar to EQUIMPENT / EQUI_CONFIG and attach it to the same Business Event?
2) enhance the SALESDOCUMENT bdoc regarding my approach!?
3) develope my own IDOC and send it to CRM and vice versa? (maybe less development than BDOC!)
4) develope a pseudo serialization for the product?!? (I do not want to do serialization at all, because this could cause XX million of Ibase records easily in production!)
Thanks for any help & suggestions!
Marco

Hi Jorgen,
what I could understand from the forum is that you have some problem with your filter conditions.
Hence forth, I would like to clarify the filter conditions and will try explain it to you how it works :
Case 1 :
In R3AC1 : Filter is VKORG : 1000
In R3AR2 : Filter is VKORG : 2000
On Request Download from R/3 to CRM, Data will get downloaded for the Request Filter.
Case 2 :
In R3AC1 : Filter is VKORG : 1000
                               KUNNR : 1000 - 2000
In R3AR2 : Filter is KUNNR : 1500 - 2500
On Request Download from R/3 to CRM, Data will get downloaded for KUNNR 1500 - 2500 with VKORG :1000 from R3AC1.
Case 3 :
In R3AC1 : Filter is VKORG : 1000
                               KUNNR : 1000 - 2000
In R3AR2 : Filter is VKORG : 2000
                               KUNNR : 1500 - 2500
On Request Download from R/3 to CRM, Data will get downloaded for KUNNR 1500 - 2500 with VKORG :2000 from R3AR2.
At the End of the Day, The filter works as follows :
1. SAME TABLE FIELD present in R3AC1 and R3AR2 :
Result : The filter conditions of request download will override the filter conditions of R3AC1.
2. DIFFERENT TABLE FILED present in R3AC1 and R3AR2 :
Result : The filter conditions of both R3AR2 and R3AC1 are considered and the data is filtered in the Request download. So , basically if the fields are different, THE AND condition is applied on the filter.
Hope You are clear with respect to filters now.
Thanks and Regards,
Vignesh Ravikumar

Configurable product in CRM 7.0

Hi all,
has anybody experience with configurable products and product model in CRM 7.0? or is there a detailed manual somewhere?
the way to manage them seems quite different from the previous release in which the PME component was external.
Thanks
Oreste

Hi,
ECC -> CRM Download of Configurable Products
First of all create the KB and Runtime version for ur configurable products(Variant configuration products ) in ECC. Then activate the IPC, download the KR and Runtime Version (SCE).
Create your own Application Customer confiruation in XCM component and the link look http://<host>:<port>/<web app name>/admin/xcm/init.do.
Then go to the table COMM_IPC_PROP and maintaint the table entry with the Application Customer Configuration in XCM for Product and also for sales order if you are using the Sales order for the configurable products...
and also u need to maintain the IPC server setting in the table COMM_IPC_URL
Using the below report RSVMCRT_HEALTH_CHECK you can check whether the IPC and java stack is active. One more thing to keep in mind is if you ever do changes to XCM component then you need to restart the Java Server everytime.
CRM (Standalone)
From CRM 2007 onward the PME has been replaced with WEBUI. in the WEBUI you create the Configurable products and then create the product model.
Create your own Application Customer confiruation in XCM component and the link look http://<host>:<port>/<web app name>/admin/xcm/init.do.
Then go to the table COMM_IPC_PROP and maintaint the table entry with the Application Customer Configuration in XCM for Product and also for sales order if you are using the Sales order for the configurable products...
and also u need to maintain the IPC server setting in the table COMM_IPC_URL
Using the below report RSVMCRT_HEALTH_CHECK you can check whether the IPC and java stack is active. One more thing to keep in mind is if you ever do changes to XCM component then you need to restart the Java Server everytime.
Pls let me know if you need any thing else
Regards
Vinod

Configurable Product in SAP CRM 5.0

Hi All,
I'm using CRM 5.0.
In CRM 5.0, i should download material, sce, and condition type from R/3 or ECC.
Is it possible for create material, sce, and condition type in CRM? Is it possible for create configurable product in CRM? Not download from R/3 or ECC.
If possible, In which t-code should i access in CRM?
Thanks.

Hi Fariz,
In sapgui, you can use transaction commpr01 to create products. Once you click on create button, you will be asked to enter product category. Next to that will be a check box named 'Configurable', which you can check to make the product configurable.
For more info on Product creation, you may also refer to the foll link:
http://wiki.sdn.sap.com/wiki/display/B1/ProductConfigurationinSAPCRM
Hope this helps.
Regards
Nisha

ARE documents for non exciseable goods

Dear Experts,
If the finished goods is not exciseable then whether the followings documents are required in export sale and deemed export sale.
1.In export sale- ARE 1 document
2 In deemed Export - ARE 3 document
In general
1. Is bond mandatory if we ship the goods to foreign customer.
2. Is license mandatory in deemed export( For non exciseable product)
Please clarify my doubts.
Regards
JP

Hai,
Any material manufactured or taken out of the manufacturing unit/ Plant - you are suppose to charge the excise duty according to law.
So all the scenarios you asked will be excisable. If the plant is not a manufacturing unit and Trading unit, then i think the material can be exported with out excise duty.
regards,
Sudhir

JCA / JDBC Configured for non-XA Attempting XA Transaction Commit

I am attempting to create simple BPEL SOA composites in SOA 11.1.1.5 that use a DbAdapter to execute a stored procedure in an 11g database. The database task being performed only involves a single database and does not require transaction support. I have carefully stepped through the creation of the DataSource and JCA pointing through the DbAdapter to the JDBC DataSource so XA transaction support is disabled, the JCA pool sets the transaction mode to "No transaction" and the JCA pool uses the dataSource value to point to the JNDI name of the JDBC pool rather than the xADataSource value.
Visually,
DataSource definition:
name = jdbc/myserviceDataSource
driver = oracle.jdbc.xa.client.OracleXADataSource
url = jdbc:oracle:thin:@mydbhost.myfirm.com:1521:GENERIC
use XA DataSource = unchecked
set XA timeout = unchecked
Keep XA connection until transaction complete = checked
keep connection after local transaction = checked
JCA definition:
name = eis/DB/myserviceDataSource
dataSourceName = jdbc/myserviceDataSource
xADataSourceName = (blank)
platform class name = org.eclipse.persistence.platform.database.Oracle10Platform
Transaction | Transaction Support: no transaction
This configuration works on one sandbox server and I got it working in a second sandbox server. However, after deleting the JDBC and JCA pools to go through the process one more time to document the procedure on the second server, I am unable to get the configuration working again. The WebLogic domain appears to be resurrecting portions of an old configuration that still references the JNDI name of the JDBC pool in the xADataSourceName parameter. I have unpacked the DbAdapter.rar archive for the DbAdapter and verified the contents of the ./META-INF/weblogic-ra.xml file don't use the xADataSouceName parameter. The Deployment Plan for the DbAdapter (named DbAdapterPlan.xml in $SOA_HOME/soa/connectors ) also explicitly configures the JCA pool using the dataSourceName value leaving the xADataSourceName value blank.
However, executing the SOA service using this JCA connection results in this error:
java.sql.SQLException: Cannot call Connection.commit in distributed transaction.
Again, I know the theoretical answer to this question is to disable transactions in the JCA and JDBC configurations and don't use the xADataSourceName element of the JCA configuration to point to the JDBC pool. However, after validating those elements and restarting the pools or performing an Update on the DbAdapter deployment, WebLogic seems to still create connections through the JDBC pool with transactions enabled.
Any suggestions?
Should I just completely undeploy the DbAdapter and redeploy it from the SOA binary installation directory? These are just lab machines right now so that's obviously not a good long term answer for production use but may help start over with refining a better procedure for doing this.

You should use a non-xa driver for your data source...
From the weblogic docs...
Configure Transaction Options
When you configure a JDBC data source using the Administration Console, WebLogic Server automatically selects specific transaction options based on the type of JDBC driver:
For XA drivers, the system automatically selects the Two-Phase Commit protocol for global transaction processing.
For non-XA drivers, local transactions are supported by definition, and WebLogic Server offers the following options ...
http://docs.oracle.com/cd/E23943_01/web.1111/e13737/jdbc_datasources.htm#autoId8
Cheers,
Vlad

Configuration Managment Pack for Non Oracle Systems (new)

Hi ,
There is a pack called "Configuration Management" for the database. This pack manage hardware , software , updates, patches, etc for host that have installed any Oracle Software.
Now, in EM Release 2 there is a new pack "Configuration Managment Pack for Non Oracle Systems" wich basically will allow me to the same but without the requirement to have any Oracle software installed.
The question is : Where can i find a white paper about it? i been looking around and there is only mentions of the product, but not extra info. I know is out already 3k p/processor..
Any ideas?
Sergio Benavides

Found this dated Oct 2005
(Note the "priced in Advance of Availability" piece)
Standalone Managers
Configuration Management Pack for Non-Oracle Systems (priced in Advance of Availability) 2.375 522,59 Per Processor -
Provisioning Pack (priced in Advance of Availability) 2.375 522,59 Per Processor -
Service Level Management Pack (priced in Advance of Availability) 79 17,42 Test -
(Must license with Beacon Plus Test pricing) 2.375 522,59 Beacon -
System Monitoring Plug-in for Hosts (priced in Advance of Availability) 1.188 261,29 Per Processor -
System Monitoring Plug-in for Non Oracle Databases (priced in Advance of Availability) 1.188 261,29 Per Processor -
System Monitoring Plug-in for Non Oracle Middleware (priced in Advance of Availability)
25 1.188 261,29 Per Processor -
System Monitoring Plug-in for Network Devices (priced in Advance of Availability)
26 1.188 261,29 Per Network Device -
System Monitoring Plug-in for Storage (priced in Advance of Availability)
27

Block plannng for non-configurable products

Similar Messages

Maybe you are looking for