Block price from any changes in the PO, when PO has released.

Hi all,
I have problem in the PO screen, when I have released the PO, then I want to block the released PO from changes in price.
in other words, after we released the PO, no one can change the net price in the PO screen.
Can we do that? any customizing should I do?
Thanks in advance for your time and advice
Pauline Kurniawan

Hello Pauline
Please check the following, Hope this will solve the Problem
1. ME23N goto PO Header "Release Stratergy" Tab, Check the Release Indicator.
2. Go to SPRO --> Materials Management --> Purchasing --> Purchase Order --> Release Procedure for Purchase Orders --> Define Release Procedure for Purchase Orders --> Release Indicator
3. Select the Release ID "from Step 1" and in Changable Column select 1
as per the above setting the Purchase Order once release will not be changable
Hope this is in line with your requirement
Regards
Amit

Similar Messages

Block PO of any changes in price

Dear All,
Can we block PO of any changes in price, after GR transaction ( MIGO) is entered?
If possible, what customizing should I do??
Hope to get feedback as soon as possible.
Thank you,
Pauline

'''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
''(If you're not using it, switch to the Default theme.)''
* You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
* Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Don't select anything right now, just use "Continue in Safe Mode."''
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
'''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
Please follow the [[Troubleshooting extensions and themes]] article for that.
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

Firefox crashes when I close an e mail on AOL also it crashed once after printing some pages from my banking statement. Any ideas. I restarted a few times without any change to the crashing problem. WHat do you suggest.

Firefox crashes when I close an e mail on AOL also it crashed once after printing some pages from my banking statement. Any ideas. I restarted a few times without any change to the crashing problem. What do you suggest.
I am using Mozilla Beta 4. I volunteered to try it out. It's lightning fast. I really love using it. I see there is a new version of Firefox should I download it??

I HAVE NOW SOLVED THE PROBLEM BY RUNNING WINDOWS REGISTRY REPAIR TOOL WHICH HAS OBVIOUSLY REPAIRED CORRUPT REGISTRY FILES.

Only query on existing form without any changes on the existing records?

Dear all,
I am working a brand new form. The form is able to query all the records from the table. However, when I leave the form, it will ask me "Do you want to save the changes you have made?" everytime. I didn't make any changes on the existing records.
My form only has 2 fields (one with LOV and one without).
Does anyone know what went wrong?
Thanks.

How do you populate your datablock? Do you query one of your values in a Post-Query trigger?
However you are populating your datablock, Forms is detecting that the status of the Form, Block or Record is changing.
Also, please let us know your Forms version.
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Is there any way to prevent web.xml from any change ?

hi all,
we have a filter in web.xml. Now we want to prevent it from any change in future. I mean after making a war(EAR) no one can change the filter in web.xml. if he chaged it then he will not be able to re deploy the application.Right now it is in web.xml so one can easily change it and then he can redeploy the application.
Is there any way to prevent web.xml from any change after making EAR(WAR)?
One can easily make a change in web.xml and redeploy the application to get the result. Now we want to restrict the web.xml as java class for any change after making EAR(or WAR).
Could some one help me to do this?
thanks,
dinesh

I think you could use some third party software to lock the folder like FolderLock, just make sure others ppl cannot access your file should be fined.
This is my stupid solution only,cheers.

Is there any way to prevent web.xml from any change like java class?

hi all,
Is there any way to prevent web.xml from any change after making EAR(WAR)?
One can easily make a change in web.xml and redeploy the application to get the result. Now we want to restrict the web.xml as java class for any change after making EAR(or WAR).
Could some one help me to do this?
thanks,
dinesh

hi,
Not at development level. We want it after deploying the application on server .
We want to create it (web.xml) at tomcat startup (or in any other web/app server ) before loading any context.
Is there any way to run a simple java class(not servlet) on tomcat startup(before initializing the contexts)?
Message was edited by:
DP_java
Message was edited by:
DP_java

Reset Release Strategy for any change in the Purchase Order

Hi,
Is it possible in SAP standards to reset release strategy for even minor changes in the Purchase Order irrespective of whether it is value change or any change in the text or Purchasing group change or whatever it is?
If so, where do we need to make the configurations.
I have seen in some thread about resetting the release strategy for decrease in Purchase Order value.Even that was possible through some BAPI.
Thanks in Advance.
S.Raghavan

hi sandesh,
sorry, i know it's too late.
i tried your suggestion, it works blocking the purchase order after release strategies are setted.
sandesh, raghavan:
i need to reset the strategies after to make any change in the po. i'll appreciate your help if you can give it.
regards
f

Any changes in the condition value then system should trigger a mail.

Hello Experts,
I have below requirement
If user does any changes (increase the price /decrease the price) in the condition value then system should trigger a mail and goes for approval.
How i can achieve this ?
Thanks

Hi
In that case again you can use MV45AFZZ program and USEREXIT_PRICING_PREPARE_TKOMP. If this exit didnt work you can try in other save or prepare to save exits in this same program. For order statuses and authorization you can use status profile and control authorization through an authorization object. For email use email sending function and users will receive an email whenever some specific condition value is changed.
This will be ABAP coding in above mentioned program using implicit enhancement. There is no standard solution for this and you have to go for customization.
Thank$

How to install my WVC210 Wireless-G PTZ Internet Camera so I can view it from any where in the world.

Hi guys I just bught a
WVC210 Wireless-G PTZ Internet Camera
I need to install it so that I can view it from any where in the world. I have no Idea how to do this.
I would like if some one can send me a video tutorial on how to do it.
I have a website that I am runing so I guess I can use that if I need something like Hosting and Domain things.
I want to know if it is posible that I can some how configure it so I can view the camera on one of my websites page.
For exaple: www.example.com/mycamera???
If not well I would love to here the options I have.
Thank you very much in advance!

Rogerio,
I have never seen a router like you have and I wouldn't dare advise you about changing the settings. It appears that it is a router/modem that was provided by your ISP. If this is the case, I recommend that you call your ISP and ask them for Port Forwarding assistance. You need to forward port 80 to the LAN IP address of your camera. The LAN IP address of your camera is the IP address that you use to log into the web interface. You should not need to change any settings on the camera. After you have had the ISP help you forward the port to the camera, go to ipchicken.com and you will see your WAN IP address. Write that address down and then go to a remote location and type it into your web browser. You should get the login page of the camera. Note that your WAN IP is subject to change. You can ask your ISP to provide you with a static IP address which will be an additional charge each month but your IP address will not change. Another option is to use a service such as dyndns to create a unique URL that you can use to access the camera remotely even if your WAN IP address changes. We can discuss that after you get access to the camera if you have further questions.

Why should I recompile report for any changes in the database ?

Hi All
I call a report (.rep) from a form using RUN_REPORT_OBJECT, and everything is OK
For any change in the database, for example :
1- Export Dump file for the schema.
2- Drop the schema
3- Re-create the schema again
4-Import the taken dump to the schema
When i call the report again, the report doesn't run. If i recompile the report again it will work.
I read too much posts about this issue, most of them are taLking about the command line parameter RECURSIVE_LOAD=NO ,
v_url :=' COMPANY_NO='||:global.company_no|| ' RECURSIVE_LOAD=NO';
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,v_url);
But , Still the problem not solved
Notes :
1- The report type is .REP
2- if I used the .JSP report, it is working fine , But i can't copy the source code for the report at the customer side.
Please Help

Well, first of all this would not be the correct forum. There is a dedicated reports forum for reports related questions. And secondly this most certainly depends on your report. If you have a query like
select * from my_tableor e.g. are using %rowtype records in your report then you most certainly will have to recompile it after you do an exp/imp.
cheers

Office 365 AAD Password Writeback not working; Event Viewer Error: 0x80230619 (A restriction prevents the password from being changed to the current one specified.)

Hello all,
I'm currently setting up a Proof Of Concept setup with directory synchronisation and password syncing to Office 365, leveraging AAD Premium for the password reset and password writeback to on premises
AD functionality. Directory Sync + Password Sync is working flawlessly with the AADSync tool. However, upon requesting a password reset for a user, I'm hitting a password writeback error. The webpage states that the password does not meet the password
complexity policy, while it does. I can set that particular password for that account at the on premises AD without any problem.
In the event viewer at the AADSync server, I'm seeing this Error pop up whenever I try to reset the password:
An unexpected error has occurred during a password set operation. "BAIL: MMS(4032): ..\server.cpp(11003): 0x80230619 (A restriction prevents the password from being changed
to the current one specified.) Azure AD Sync 1.0.0475.1202"
My Setup:
Windows Server 2012 AD with a single forest
Seperate domain joined Windows Server 2012 for AADSync tool
AADSync version 1.0.0475.1202 with options password sync, password writeback enabled
Service account for AADSync tool with Replicating Directory Changes and Replicating Directory Changes All permissions
on root AD forest structure with inheritance to all objects. This account also has the permissions to Change Password and Reset Password on all descendant
User Objects.
AAD Premium for my office 365 tenant
AAD Premium licenses for the test users and the office 365 account used to sync to Office 365. This account is also Global Admin.
Could anyone help me with this? Is there something I’m missing here? My guess is that the AAD is not trusted or the service account for AADSync tool does not have the proper permissions. I’ve tried
many options, like setting the AADSync Service account to Enterprise Admin or granting the service account Full Control over that particular user.

Concerning my issue:
The Default Group Policy setting: Minimum Password Age is set at 1 day. As I was testing this feature with new users, their provisioned passwords were less than 24 hours old and the Minimum Password Age of 1 prevented the change of the password.
After changing this to 0 days in the Default Group Policy, my password resets started working for newly created users. While this might not have affected existing users in production, it had me looking and searching for permission issues on my AD.
So for those that might be experiencing ADSync Event ID 6329 and PasswordResetService Event ID 33008 Errors when trying to do a Password Reset using AAD Premium with Password Writeback, it might be helpful to check the applied password policy.
The issue is solved.

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD

We have a DP 1ghz Quicksilver PowerMac G4 that will not boot from any disc EXCEPT the Apple Hardware Test CD that came with the machine.
We were in the process of installing 10.4 Tiger before placing it for sale.
The Mac was originally OSX Server 10.1 that we later converted to a worksation running 10.3 Panther.
It has 1 GB of memory, 80GB hardrive, 250MB Zip Drive and a Radeon 7500 video card.
Since this machine only has a CD-R drive and not a DVD-R, we installed Tiger using another Mac via Target Disk Mode. The installation process went well, but when I tried to reboot I got a Kernel Panic right after startup screen with the grey Apple logo.
On some reboots we get to the blue startup screen, others it stops at the grey Apple logo, others a black box like the a Kernel Panic - but with no text. Twice it went directly into Open Firmware.
We have done the following during our troubleshooting:
- Reseat RAM, Video Card, Hard Drive, Zip & CD-R connections
- Remove RAM 1 stick at a time and reboot
- Replace RAM with RAM from another working Quicksilver
- Replace Video Card with one from another working Quicksilver
- Zap PRAM
- Reset CUDA switch
- Unplug the MAC and remove everything (RAM, Battery, etc) for 30 minutes and try to reboot
- Tried booting from the Macintosh Server G4 Software Restore CD
- Tried booting from Mac OS X Server CD
- Tried booting from AppleCare Protection Plan CD with TechTool
- Tried booting from Diskwarrior CD
- Tried booting from an external FireWire drive with a disk image of Tiger OS Install
- Tried booting with the hard drive disconnected
The Mac WILL boot from the Apple Hardware Test CD and will pass ALL of the extended tests.

Conventional wisdom says that any Mac that will not boot up from a System/Install CD OS 9 or an Install CD Mac OS X, has a Hardware problem.
The diagnostic CD is a red herring because it uses a very primitive method of reading the CD, and so does not properly represent the machines general ability to read CDs.
I would look at the CD drive cables, etc, and see if another drive gives different results.
You have not mentioned using the Startup Manager (option key at Startup) to do any checking:
HT1310- Startup Manager: How to select a startup volume

Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?

Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?
Thanks in advance.

1. On your computer, yes. Use Boot Camp, Parallels Desktop, VMware Fusion, VirtualBox, or similar software.
2. No; if you use an emulator, it may install system components. Back it up anyway.
(110033)

I am Greek. I downloaded a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

I am Greek. I purchased a film from ipad but for the last days it has not been downloaded and the status is "waiting".the charge has been made to my credit card. Does any body knows?

something other is dowloading somewhere on ipad

Block price from any changes in the PO, when PO has released.

Similar Messages

Maybe you are looking for