Block.psd missing file

I was working in my MacBook Pro (Intel) in a Motion project that it has been saved in an external hard disk drive.
My MacBook Pro failed and I had to switch to work with my iMac G5 (Power PC) but when I open the project, I'm getting a message about missing files and the name of the file is:
/Library/Application Support/Final Cut Studio/Motion/Library/Content.localized/Template Media.localized/Blocks.localized/block.psd
I don't know how to proceed to solve this problem. What I see on screen is that a template is not shown properly, has missing parts.
I really appreciate any help that I can get.
Thanks

I looked for the block.psd file on my iMac and I didn't find it in spite of looking in the whole file system.
I bought the Final Cut Studio set around 3 years ago and I installed it in this iMac. Then this year I bought the MBP and installed there too.

Similar Messages

I can no longer open PSD Photoshop files on Preview

I can no longer open PSD Photoshop files on Preview since I installed Snow Leopard on my White MacBook. Whenever I double click a PSD file, it opens in Photoshop.
I used to force PSD files to be opened with Preview by "Get Info" (command + I ) and then Changing the option "open with" to Preview.
I also tried draggin the PSD file onto Preview, nothing happened.
Did Snow Leopard stop PSD support, or I'm missing something??

No, I can still open psd files in Preview, no problem, from both Preview's "Open" dialog and by drag 'n drop onto its icon. It opens simple psd files without error, files with an alpha channel may or may not open correctly, layers will display the topmost layer, if that layer has a mask it displays incorrectly. In short, nothing seems to have changed.
Francine
Francine
Schwieder

For all of you, who gets "missing file" error on syncing theirs photos

I dont really knows any better way of correcting this error when deleting "iPod photo cache" -file doesn't help, but here is my answer to that. If somebody knows a better solution, plase tell it to all of us.
I was getting an "unknown errorcode -39" and that "missing file" messages every time i try to sync my photos from my Windows 7 based computer to the iPad. It seems to me that there are something wrong on the iPed side but how to corrrect it (and i dont know anything on how apple works)?
Just as i was gioing to give up, i realize that there must be two caches in sync, one for sender (for itunes) and one for a receiver (for example iPade) side. Both must be in sync whith themselfs and in a filesystem on their side. Easy part is on iTunes side, just delete the cache (thats because its contents can and will be recreated using the local filesystem information only).
The other side (iPhone or iPad) is much more harder to do as there are not (or i dont have found it) any simple solution to do it. There are only one solution which i have found to be solve this problem (every time) and it is that you have to get a sync target to think that it is being sync on a different iTunes photo library (even when its empty). If this works, then you get a iTunes message saying that "are you sure?, as if you continue ALL FILES ARE DELETED when your are resynced on different photolibrary". That is just what we wanted. For myself it has worked every time, but it takes time, as you must resync it twice (once in an alien or differentt, and back to the original or updated photolibrary).
Those who knows better, comments please?

Part 2.
Another thing that all Encore users ought to regularly offer up a daily prayer of thanks for is the PSD support for menus.
Let me tell you a little story, all about how bloody awkward it
i can
be, again using Industry Standard "Flagship" applications.
The little saga above about the additional _HL_LB image completely forgot to mention that there is a very nasty scaling issue awaiting the ignorant (like me).
It doesn't scale the letterbox image automatically.
SO, it's a case of as usual, preparing all Widescreen assets in anamorphic mode (create & design in PS using PAR correction, reshape image to Square Pixels)
Duplicate the _HL for the _HL_LB image.
Now, because of the rescaling issue, take this into PS, and resize the image to 720x360, then resize the
i canvas
to 720x480, making certain your background is white, as failure to do this will mean the Letterboxed SPHL are incorrectly scaled, although the button hotspots are in the right place.
Aargh - if it was not for the "Phone A Friend" option, I would still be stuck on this.

Event Says Missing File, Can't Remove It.

Final Cut Pro X is telling me that a file in my event needs to be relinked. Basically it's a .psd file that i have since removed from the event. honestly i was working so fast I dont know if i made a careless mistake but for some reason FCPX seems to think I still need to relink that file. But the file isn't even in the event. I tried to locate it and just delete it so FCPX would realize I don't have that file anymore. I even tried relinking another .PSD file with the same name to just overwrite whatever it was and then just delete it but it keeps saying that the PSD File i'm trying to replace it with doesn't have the same framerate or filesize or something so it isn't compatible. which doesn't make sense because I literally made a cloned copy of the PSD file that I had deleted.
I even browsed through the actual event folders on the drive just to see if I could find where FCPX was getting confused but couldn't find the psd file it thinks it's missing.
can anyone help me with this absurd prediciment?

I have had problems with FCPX ever since I bought it and have discussed some of the issues in these forums. I now have 10.0.5 and it seems to be better but have found in editting my latest project that each time I quit FCP, all my work is lost: I either get an empty grey canvas like I would if using it for the first time, or I get an accurate Events list but no timeline or I get the red "Missing File" alert in the timeline with no Event listing. The only way I found around this was to leave the computer permanently on and FCP loaded for the duration of my editing. All the files are in the Finder, but if I try to import them, although they are FCP files, the program will not open them (it will reimport event lists but not projects). Only once in many quit and reopen episodes did it correctly load everthing I had worked on, but I have found today (now the project is complet but not deleted) that it is still in its bad habits.

In XP Infinity Blocks are missing when logged in as a user

On XP Computers when I am logger on as adminstrator there is no
problem. When my students are logged on as users, some of the
Infinity Blocks are missing.
For example on Ch 2.1 Sec 2.2 lab, the ITOGGLE Block is a question
mark. I can search and find it, but there is no way to add it the
VAB progam in place the question mark.
Can you help me out? Thanks,

This problem is has to do with "security" (AKA file permissions) for some of the VAB files. I am not aware of what may have caused the problem. As the USER check to see what problem files exist. Then as the ADMINISTRATOR check the "Security" tab in the file's properties and you'll find that the USER is unable to modify/read/see/etc that file. Changing the setting to match one of the "OK" DLL block files should correct the problem. Alternatively you can run the command line script that the installer runs: cacls "C:\Program FIles\Hyperception\VABINF" /T /E /G Everyone:F Assuming you installed in the default directory, you should be able to drop to a command prompt and issue this command. It will scroll the name of every file in the given directory and all subdirectories. It should reset every file.

Digital Imaging missing files

I cannot use scan functions on my Windows 7(64) PC . I have used the Print and Scan Doctor and have downloaded, installed and unistalled many times the newest drivers. The uninstall/install hangs up because a file (or more) is corrupted or missing. The last message referred to C:\ProgramFiles(x86)\HP\Digital Imaging\bin\hpotradd.dll. I think I need to install Digital Imaging to replace or repair the missing files and simply trying to install the newest drivers doesn't work. Is there an ability to download and install just Digital Imaging? I have the printer installed on a local network and the printer functions work fine on my Windows 7 (64) laptop.

Hi @Literal1
I would like to help you with your Digital imaging. The best think to do is perform a complete comprehensive uninstall and reinstall of the full feature software and driver.
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Download the software and choose to save as, save to desktop >PS_AIO_06_C309g-m_USW_Full_Win_WW_140_175-4.exe
After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and run the Microsoft Fix it tool. What it fixes;
Corrupted registry keys on 64-bit operating systems
Corrupted registry keys that control the update data
Problems that prevent new programs from being installed
Problems that prevent existing programs from being completely uninstalled or updated
Problems that block you from uninstalling a program through the Add or Remove Programs (or Programs and Features) item in Control Panel
Turn off the Real-Time Scanning and Firewalls; The image below is a McAfee example, if you have a different antivirus program and need help disabling Real-Time Scanning and Firewalls let me know.
Image source
Download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

RECOVERY OF THREAD 1 STUCK AT BLOCK 54 OF FILE 2

Hi all,
i have problem . my db is running on Oracle9i release 2. when i want to startup my db, it returns 'shutdown is initializing..' then i force by apply shutdown abort. then i retry to startup, then it give message as 'RECOVERY OF THREAD 1 STUCK AT BLOCK 54 OF FILE 2' . i refer to similar forum, then i apply the below commands:
SQL> recover file 2 block 54
ORA-00905: missing keyword
then i use -->
SQL> alter database recover datafile 2 blok 54;
alter database recover datafile 2 blok 54
ERROR at line 1:
ORA-00905: missing keyword
FYI, i dont do any backup because this db is only on my personal laptop. and also not running in archivelog mode. finally i just run below-->
SQL> recover database
and the result as follows:
ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [3020], [8388662], [1], [135],
[7548], [16], [], []
ORA-10567: Redo is inconsistent with data block (file# 2, block# 54)
ORA-10564: tablespace UNDOTBS1
ORA-01110: data file 2: 'C:\ORACLE\ORADATA\CGCDEVP\UNDOTBS01.DBF'
ORA-10560: block type 'KTU UNDO BLOCK'
can anybody help me?
Thanks all
Best regards,
Nonie

ORA-00283: recovery session canceled due to errors
ORA-00600: internal error code, arguments: [3020], [8388662], [1], [135],[7548], [16], [], []
ORA-10567: Redo is inconsistent with data block (file# 2, block# 54)You got ora-00600 error which is called by a special name called "oracle bug".
Did you try this solution
Recovery problem

Help Needed. Upgrade from CS2 to CS3 and now PSD Linked Files Not Read?

Hi!
Just upgraded to Illustrator CS3 and I am trying to work on a document I created in CS2 and for some reason when I open the document I am getting this message:
Could not find the linked file "filename.psd". Choose repair to locate the missing file, Replace to select another file, or Ignore to leave the link unchanged.
Now I went in to try to re-link the file, but I can not 'see' any PSD files? I had a series of transparent PSDs in that document.
Why can't the new Illustrator see my PSD files and how do I fix this problem?
Thanks!

Hi! I just wanted to post back to say that I ran the installation CD again to fix whatever might be wrong and when I re-opened Illustrator I could go in and see the "PSD" extension to re-associate the files.
I'm now having problems with Photoshop CS3, so I'll have to sort that now. Not the smoothest of upgrades to this CS3 suite, I must say. LOL
Oh well!

Qmaster and Missing files

Hi all!
I have a small Qmaster queue up and running (surprisingly) for Final Cut Pro 5.1. It runs smoothly most of the time, but when a user submits a job with a missing file, each node pops a window asking if you would like to reconnect the media or to continue. These windows stay on the system and block the node from doing any further work until I find out about the problem, and clear the pop up window.
I'd like to know if there is a way to block these windows from popping up by choosing a default "continue" behavior, or better yet to error out. I looked through all the prefs and couldn't really come up with anything.
Any other ideas on how to get around this problem? I've trained the users to preflight their files, but this is going to pop up no matter how many times I hit them over the head. Thanks!
~half.italian
G5 Mac OS X (10.4.7)

I agree. It would be. But when you are dealing with many different users, mistakes happen occasionally. A mistake in this case means any node that picked up the job is hung until someone clicks a little pop up window on each of the nodes.
I understand where you are coming from, but it's my job to make sure the nodes are always running properly. I can't ultimately control whether a user submits a job with a piece of media local to the machine unless I stand in each of the rooms at all times.
The only way I can see to guarantee that the nodes don't get hung up for this problem is to figure out a way for the system to deal with a missing file when and if it occurs.

Software Restriction Policy block zipped js file.

Trying to block zipped js files from running. Have applied the following path rule under our software restriction policies.
*.zip\*.js
*\*.zip\*.js
*.zip\test.js
Neither works to block.
Using "test.js" as path rule works fine.
Am I missing something here?
Also I have added JS as a file type in software restriction policies.

Hi Allister Wade 2,
Here is a link for reference of Software Restriction Policies.
Software Restriction Policies
https://technet.microsoft.com/en-us/library/hh831534.aspx
All the failed rules including the letter "*", I am afraid this policy will not support the fuzzy query. Considering test.js will work well ,we would add an exact file path to be forbidden .
What is the purpose of this operation ?If it is used to forbid the ZIP software from running the js file .
As a work around ,we can change the js file association to have a check.(Control Panel\All Control Panel Items\Default
Programs)
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Help! Can I recover missing files?

Hi - I just set out to back-up some project files by dragging a folder containing them from my desktop to the icon for a blank CD-R. I had second thoughts, so (without burning the CD) I dragged the folder out of the CD-R and back to the desktop. There is now only an "alias" of the original folder on the desktop. I cannot find the original folder or the files contained within it.
Is there a disk utility program/function (either Apple or 3rd party) that can help me find these missing files? Thanks.

hi dinaleo,
barry's suggestion for locating them was to do a 'spotlight' search, which is in the top right corner of the screen, and looks like a magnifiying glass on a blue circle. if you click on this and type in anything from the title of documents/folders to words in them to extensions (e.g. .doc, .mp3, .psd, .pdf), to the date it was created, or basically anything else, spotlight will give you a list of files or folders containing these. the more you type the more specific the search it will be with less results to look through.
note: the 'show all' button gives you a better viewing window.
and fyi: when you drag contents onto a disc(cd-r, dvd-r, etc.) icon, you don't actually move the files. you just create an alias, and then when you burn they are 'copied'. but like barry said, unless you move something to the trash, it is not taken from the system.
and if you had moved it to the trash that would be the first place to look.
barry, i hope i'm not butting in here
joey

TS1368 I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

I'm a PC user with an itunes account for several years. I updated my itunes and now it wont open and shows me 'missing file MSVCR80.dll,and error 7(Window error 126)' keep coming up even after re-installing itunes . What should i do?

Click here and follow the instructions.
(98897)

Spotlight Indexing, Systemstats, Missing File, All After Mavericks Upgrade

Dear Mac Support Communities,
The upgrade to OS X 10.9.4 has crippled my computer.
My main question is: should I reformat, or should I wait for a patch to come out to solve whatever is wrong with Mavericks? I explain below.
Spotlight is constantly indexing. The mdworker is all over the place on the Activity Monitor—4% and then it explodes to 85% of CPU usage. Systemstats kicks in randomly (connected to spotlight perhaps?) and eats up 90% of my CPU and 3gigs of RAM. Time Machine takes AGES to backup.
I have not been able to stop Spotlight's endless indexing. I have moved my hard drive and my Time Machine backup into the 'private' filter in 'Spotlight Preferences.' I have also tried the "sudo mdutil -a -i off" trick to stop indexing altogether. But Spotlight Indexing goes "off" and then automatically turns "on" in Terminal. Spotlight carries on, and the computer performance is choppy.
I've run disk repair. First, I repaired permissions. Then I verified and attempted to repair the the hard drive. There is a missing file apparently, and I therefore must reformat. This is very first issue I've ever had with the hard drive since I bought the computer. Considering how awful Mavericks has been—I have been reading other Support Communities posts—I'm nervous about something going wrong, or that all these problems will persist after the reformat.
All of this has occurred three days after my upgrade to to OS X 10.9.4. I have heard of numerous people having problems with Mavericks. All similar problems concerning missing files, haywire spotlight, systemstats devouring any remaining CPU power and memory space, and slow Time Machine back-ups.
Anyone with the same problems? Care to theorize some solutions?
I have a late 2008, 15inch MacBook Pro., 2.53 GHz Intel Core 2 Duo, 8 GB 1067 MHz DDR3, running OS X 10.9.4 (13E28).
Cheers! I appreciate the help.

Older Macs have more troubles under Mavericks. Considering the age of your Mac, it's not uncommon to start have hardware issues like drive failure.
To repair the drive you must boot from the Recovery Drive.
Boot into the Recovery Drive by holding down Command R when restarting.
Run Repair Drive and Repair Permissions using Disk Utility in Recovery.***
Next Reset Home Directory Permissions and ACLs following directions here This will serve two purposes. It will reset YOUR permissions. Not the same as Disk Utility reset permissions and it will cause Spotlight to re-index your drive when restarting.
Restart
Download and run the combo updater to refresh your OS X files.
OS X Mavericks 10.9.4 Update (Combo)
http://support.apple.com/kb/DL1755
MORE INFO ON WHY RUNNING COMBO FIXES ISSUES
Apple updates available from the Software Update application are incremental updates. Delta updates are also incremental updates and are available from Apple Downloads (software updates are generally smaller than delta updates). The Combo updates contain all incremental updates and will update files that could have become corrupted.
Combo updaters will install on the same version as they're applying--no need to roll back or do a clean install.
"Delta" updaters can only take you from one version to the next. For example: 10.9.3 to 10.9.4. If somehow the 10.9.3 is missing something it should have, and that something isn't changed between 10.9.3 and 10.9.4 it will still be stale after the delta update.
***If Disk Utility is unable to repair you will have to copy your data to an external drive first. Reformatting will erase the drive. You should have a backup regardless, if your data is important to you. Just like a seat belt and an air bag protect you in different ways when driving, you need both Time Machine and a clone for full protection. If you don't have an external drive for backup, I can give you some suggestions to get you started.
Both of these applications can be used to create a clone.
SuperDuper! http://www.shirt-pocket.com/
CCC http://www.bombich.com/download.html

Captivate 6 Errors: Missing file libwinpthread-1.dll and The Application was unable to start correctly (0xc000007b) on Windows 2008 R2

Hi,
I have a problem with Captivate 6 installation on Windows Server 2008 R2. I have 2 different scenarios where I tested but the result is same.
1- I used AMEE (Application Manager Enterprise 3.1) to create the installation Package to deploy through SCCM 2012.
Notice that the current package works fine on Windows7 (x86 & x64) but not on 2008 R2 due to an error after I try to launch Captivate.exe application.
The error states that there's a Missing file: libwinpthread-1.dll and if I copy and made a registration of this .DLL file then it sends another error saying: The Application was unable to start correctly (0xc000007b) so it never let me launch the application.
2- Now if I install the package directly from the Original sources(CD) without creating any AMEE package after completing the installation I still have the same error about the DLL missing file.
Is there any fix or workaround to install Captivate 6 on Win2008 R2 ?
Thanks in advance & kind regards.

Wow, No replies so far !!
Any one ??

Blocking access to file sharing (AFP/SMB) from outside of network

Hello all,
Is there a way to block access to file shares from outside of our LAN? I have a machine that has some sharing turned on (it is also my email server) and I can reach it across the internet and mount shares as if I was in the office.
How can I block this access? Both SMB and AFP?
Thank you,
-John

Justin, thank you for your reply. The machine is on a public ip address and is not behind a NAT router. I've turned on the software firewall and that is working now. However, I imagine it would be better to use a hardware firewall. Any suggestions on a good one? Thank you.

Block.psd missing file

Similar Messages

Maybe you are looking for