Block purchase order for releasing

Hi expert,
is it possible for us to block a PO for release if the item in PO already been blocked ?
Thank you.
Regards
Simonksh

user11197404 wrote:
We sent the purchase order for the new license to Oracle on last Friday
yet to receive the new CSI for the new server .
can we still move forward with deployment activity and later specify the CSI
or would that stop us suring the install process if we don't have yet the CSI ?
Are you asking from a technical or legal standpoint?
If technical, do you see anything in the installation instructions that mention entering license information? What happens if you try to go ahead and install? What could be the worst that could happen?
>
Kindly help me .
If you have any idea any metaline node pls let me know ..
Thanks an addvance..
j2vinod

Similar Messages

  • Report to view pending Purchase Order for Release

    Hi,
    Is there any sap standard report through which we can view pending Purchase Order for Release.
    Regards,

    Hi,
    you can use transaction ME28, this can give information of pending purchase order for release on release level.
    but this transaction is used for releasing the collective release for purchase order. this is not an report.
    if you want transaction for reporting purpose only, you need to create a report or query on EKKO table. based on release indicator.
    vikas,

  • Production order overlapping with purchase orders for outside process

    I set up the overlap option in a router so we can send 50 pieces (total order quantity is 200) of material ahead to an outside heat treat operation.  When we try to create the purchase order for the 50 to be sent out for heat treat two problems occur.
    1. The quatity in the purchase order is for the entire order of 200, not 50.
    2. We get a message "Date /23/2010 period D is not valid.
    We currently do not use the functionality of splits and overlaps so if anyone can help or guide me to a good resource I would appreciate it.
    Regards.
    Gail
    Edited by: Gail Weeks on Nov 12, 2010 4:19 PM
    If anyone could help with this question I'd appreciate it. Thanks.

    Gail:
    the next operation would be an external operation in your order ? That is, has some external Operation Control Key?
    Then the PurReq for this operation is created at creation or release of the production order by the total operation quantity. Ovelapping allows you to reduce some total time in order, but I don think that can be applied for the purpose you describe. Let us know more details about your requirement.
    Regards

  • Purchase order for external service

    Dear experts,
    I tried creating a purchase order for a service, with account assignment unknown U, with item category D, but after entering the item details in the item overview, it keep saying " ACCOUNT ASSIGNMENT UNKNOWN NOT ALLOWED WITHOUT GOOD RECEIPT", i would like to know why this message is coming up, and how to rectify it, thanks for your anticipated contribution

    Hi,
    You can not use Account assignment unknown U in the creation of service order as system need a cost object with a G/L account during saving of service order which help system to post to required G/L account automatically on further transaction MIGO & MIRO posting.
    You can create contract(ME31) with   Account assignment unknown U & item category D as you do not know from which account or cost object specific  the contract going to be used,so as the contract can be used for all department/cost center./project related in future.And then you can create a release order/call off/service order(ME21N)  with Account assignment unknown K(in case of cost center) & item category D wrt contract  with entering all likes cost object u2013 cost center  , G/L account related with other input data.
    Check any user exit which not allow to create with  Account assignment unknown U & item category D.
    NOTE: if you create service order  with  Account assignment unknown U & item category D,then during SES, you need to enter cost object ( K or P or C  etc) with a G/L account.
    Regards,
    Biju K

  • LOGIC FOR CREATING Purchase Order FOR repective Purchase Requisiton URGENT

    hi all,
    guys i have got all the purchase requisition for the materials  from EBAN table.
    now i have to create the PURCHASE ORDER  for these PURCHASE REQUISITIONS.
    so how should i proceed.
    what logic i should use to create the PO for These PR.
    if anyone of u have any code regd this requirement then plz share it with me.
    its very urgent, i have to deliver it by today evening.
    plz help me .
    i will award ur efforts.
    Thanks
    Sanjeev

    hi,
    Automatic Conversion of PR to PO
    You created purchase requisition for various material. During creation of purchase order you used the following path:
    Purchase Requisition
    .......Follow on function 
    .........Create Purchase Order
    ............automatic via purReq. 
    When you mentioned required purchase requisition number and execute, system give error that purchase requisition does not contain any suitable item. 
    Is there any setting in customization where you can monitor and use that function.
    In an effort for you to successfully use the Transaction Code ME59 to automatically convert the current PR into PO, then the following criteria should be met: 
    1) In the Purchasing View of the material master data, the "Autom. PO" field must be clicked; 
    2) In the Purchasing View of the Vendor Master Data, the "Automatic Purchase Order" field must be clicked; 
    3) The Outline Agreement or Purchasing Info Record shall be maintained which will allow the automatic copying of unit price and other conditions into PO; 
    4) The Source List shall be maintained for the nominated vendor which was shown in either the Outline Agreement or Purchasing Info Record. 
    or 
    it might be PR subject to release strategy and not yet released
    or 
    If you're not using a source list or automatic creation of PO, you may need to assign the requisition to a purchase information record using transaction ME56. Then it should appear in ME58. 
    reward points to helpful answers.
    rgds

  • BLANKET PURCHASE ORDER WITH RELEASE

    HOW TO DO CONVERSION OF BLANKET PURCHASE ORDER WITH RELEASE
    ,PLZ SEND SAMPLE CODE OR UNIT TEST(UT) DOCUMENT.

    Hi Suresh
    you can define the copying rules with the help of following customization.
    SPRO>Purchasing > Purchase Requisitions > Text for Purchase requisitions > define copying rules.
    define text types and linkages.
    SPRO>Purchasing>purchase order>Text for purchase order
    Define copying rules for header and item text for PO as per the requirement.
    Best Regards
    Nishant Shende

  • Purchase order re-release

    Dear All,
    my client wish , purchase order should not go for re-release if buyer changes/ amends delivery date in ME22N
    Thanks

    Hi,
    Just complementing, customizing path:
    T-code OLME
      > Purchasing
      >> Purchase Order (Assumimg that you are dealing with release strategy in PO)
      >>> Release Procedure for Purchase Orders
      >>>> Define Release Procedure for Purchase Orders
      >>>>> Release indicator
    You can also refer following document:
    -> http://wiki.sdn.sap.com/wiki/display/ERPSCM/RELEASE+PROCEDURE
    Hope it helps!
    Cheers,
    Eduardo Junior

  • Several purchase-orders for one requisition

    Hello,
    as I read in SAP/OSS Note 109143, it is not possible to create more than one purchase-order for a purchase-requisition, when the requisition comes from SD-order (Orders on Hand).
    We use Release R/3 4.6C. Are there possibilities in ERP 2004/2005 ?

    Hello,
    Thanks, for your answer. I mean several purchase-orders for one requisition-ITEM. The requisition-ITEM comes from an SD-order-ITEM.
    We want to split the requisition-ITEM-quantity to several vendors.
    SD-ITEM (200 Pce) -> req.ITEM (200) --> vendor 1 (100 Pce)
    .......................................................|-> vendor 2 (50 Pce)
    .......................................................|-> vendor 3 (50 Pce)

  • How to create a purchase order for a purchase requisition

    Dear Experts,
       Explain the steps for creating purchase order for a purchase requisition.
    and where can i find this purchase requisition field in PO creation.

    Hi Ravi,
    Check out these documents:
    http://www.olemiss.edu/projects/sap/MM_Create_PO_with_Ref_to_a_PR.pdf
    http://www.sap.com/africa/services/education/pdf/Work_Instruction.pdf
    Regards,
    Chandra Sekhar

  • Creating a Purchase Order for the Asset

    Hi,
    Please see the following steps:
    1.Create a purchase order for the asset.
    2. Post a goods receipt from this PO.
    3. Quantity of asset will be transfered from goods receipt.
    But I find quantity of asset(AS02) was not be transfered and still was equal to 0.
    Could you help me?
    Thanks and Regards,
    Colin.

    see the field status varient for the gl account see the qty field is optional field or not
    and check in the asset group also qty field is the optional field
    Assign point if useful
    Regards
    A.k

  • How to block Sales order for any overdue balance.

    There is a need to change SAP setting for blocked Sales Order for due balance. Current SAP setting : block is valid only for "over due
    more than 30 days".
    The requirement is to block order based on any overdue amount say For example : if we have due balance for 1 day, than system should block the SO.
    In current credit management settings applied, there is Static check ( C ) and Oldest open item (C ) with Days oldest item =30 days. Kindly suggest as what changes should be made to reflect the desired changes. Also , help in confirming the thought that Static check itself considers the OPEN ITEMS, so if i am activating static check and REMOVES THE OLDEST OPEN ITEm, will it take any overdue amount automatically and block subsequently. To add to it kindly explain, what is the use of this additional check of Oldest Open Item ( with days = X days ) for creit mngt. can't we maintain it by Static check.
    Kindly guide as what to change in OVA8 to have this. All feeedbacks are highly appreciated.

    The user want to  block SO for 2 types below. System must block SO if the credit limit is exceeded and/or the payment is overdue
    Currently Two credit checks in OVA8
    1- Static check
    2- Payment Overdue check by Oldest Open Item ( 30 Days limit is set)
    But, now for SO block due to payment overdue need to be changed from 30 days overdue to any day overdue.
    How to acheive the above , Also kindly confirm that Static check contains OPEN ITEMS so Won't static check only carry the functionality to block SO for ANY DAY OVERDUE.
    Any feedback is highly appreciable.

  • Purchase order for services

    When creating a purchase order for services, I am entering services lines in the SERVICES TAB, I would like to structure the services in the service specification into a hierarchy of outline levels. How I can do this? How can I activate the Service Specification outline ?
    Thanks

    Hello,
    You can use an outline only in t the 'Full Screen: service'. In the Services full screen, you can choose 'Outline On/Off' to show and hide the service overview. You ser the width of the service overview as desired and when entering the transaction, system displays the settings selected before leaving the transaction.
    If you select an outline level, the data area of the services displays the relevant service lines. You can choose 'Services' to display at outline level whether service line exist at outline level.
    Regards,

  • SMBLN filed blank in case of service Purchase order for MSEG

    Hi expert
    SMBLN (Number of Material Document) filed blank in case of service Purchase order for MSEG.
    if i check for normal  po i get my number for which i have doing reverse.
    Case example
    when i check in mseg for Mvt 106  Material Docu No , in the field SMBLN i get for the  Material Docu No of 105 for normal PO.
    when i check in mseg for Mvt 102  Material Docu No , in the field SMBLN i dont get for the  Material Docu No of 105 for Servicel PO
    Regard
    Nabil
    Edited by: sayednabil on Apr 11, 2011 11:50 AM

    Hello andrewjkasten, 
    It's good to hear from you again, although I truly wish it were to share a more pleasant experience than when we previously conversed. It is always great to keep an eye on sales however you can so you don't miss them! I'm sorry to hear a technical issue may have caused your order to not reach our systems and missing out on a great sale price! 
    Using the information you registered with the forum, I've sadly been unable to locate your computer order. With that said, I would like to look further into this and am sending you a private message to gather the necessary information. I look forward to your correspondence! 
    Respectfully, 
    Tasha|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Delivery completed indicator in purchase order for service item

    How can I make the delivery completed indicator (EKPO-ELIKZ) in a purchase order for a service item ready for direct changes.
    Per default this field is hidden on purpose for service items (according to SAP note 735404). Please inform me of customizing entry where that can be changed!
    Thanks,
    Johnny

    delivery completed indicator only gives information for MRP ( That not consider balance qty as onorder stock), it has no control on GR, so I am not sure what you will achieve to mark it in service PO?

  • Transfer of tax indicator to purchase order for service items in shopping cart

    Hi all.
    I have a problem with the tax indicator in the shopping carts and in the backend purchase orders for service items. If I create a shopping cart with service items with different tax indicators, the backend purchase order have a unique item including all the services. So, all the PO items are under one tax indicator while in the shopping cart there is more than one indicator. I mean, the PO is not correctly replicated with the information of the SC.
    Example: shopping cart in SRM with 3 items, tax codes: V1, V2, V1. The standard code transfers the information to the backend, and creates a purchase order with an unique item with the 3 services under tax code V1. So, the second service is not under the correct tax code, and will be wrongly invoiced.
    We have debugged all the code of the process, and we think it is a standard bug. When you replicate a PO in the backend from a SC in SRM, have you experienced this behaviour, or the service items are grouped in different PO items each one with the correct tax indicator?
    Thanks in advance.

    Hi again...
    I forgot to mention that we have found and applied the note 1822107 (Purchase order: wrong tax code for PO with 2 service items), that fits exactly to our problem. But after testing, it doesn't work.
    Regards.

Maybe you are looking for