Block site 1.1.8 not working right

why is it that when I added australianbrewingcompany.com to the block list it doesn't do it.

This is not direct answer to your question about the blocklist, but it may solve the problem of the site appearing mysteriously on starting Firefox.
You may have two related problems, malware and changes caused by that malware one of which is likely to be shortcuts used to launch Firefox being changed so that they have a rogue URL appended.
Software can clean up the shortcuts or you may try right-clicking checking and editing them yourself. You still need to deal with the malware though, and the problem may occur until that is sorted out.
Another thread where a similar problem was dealt with successfully and multiple Malware removed.
* see ''static.australianbrewing company keeps opening my browser'' [/questions/978536]
Note it is important to scan with as many and fully updated tools as possible.

Similar Messages

When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

When I link to an external site, the link does not work, if I right click "Open in new tab" the link works.

I have not changed any of my preferences and they look like they are as I would have left them.
I tried resetting Firefox and deleting the preference file, no change.
By the way, I hate that the tabs are on top and not where they belong above the pages they are for. There should still be a way in Firefox to put them back without having to use an add-in.

Just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon

just want to say that's Block pop-up windows it's realy need to fix not work ever i think in Microsoft explorer it's work good but in firefox else new virsion Firefox4 it's not work right so please yts have to fix it it's so many important addon

[Quote]
Waiting for Tidbits and Elector to grace my post with there constant negativity and start a war of words as usual... since they love stirring the pot and angering the Windows Phone Community every time they reply to posts. I just can't believe they spend that much time here on the forums replying if they are not a paid Verizon employee or a paid basher from a competing platform.
[/Quote]
Well I found nothing wrong in your post. So why even make a statement like the quote I included?
Once more I am a retired government employee. So I have the time to post. Or has my rights been taken away to voice an opinion?
Your posts was great you were not whining about your rights to file complaints to the FCC or FTC etc. One of the best I have read.
And I am not trying to sway you from your phone choice. If you looked at my avitar it shows apple iphones. But I use and have used androids and not Windows phones.
However your numbers of windows phone users all leaving over the issue is miniscule in the number of users of Android and iOS devices.
I have written many times I wish all the devices get updated like iOS devices do. But at present that is not happening
No bashing, no adversarial post just a little common sense is all I use.
And again your post was great.
Good Luck

Sound Blaster X-FI Pci Express Front Panel Not working right Win7

ASound Blaster X-FI Pci Express Front Panel Not working right Win7
Please read carefully
Part number Part SB040
Hello,
I have a fresh install of Win7x64 OEM. First, I want to say that I have "AUTOMATICALLY MUTE SPEAKERS" UNCHECKED under the Headphone detection tab. I have tried "Automatically Enable Headphone Settings" checked or unchecked. No difference.
As soon as I plug in headphones to the front panel connector , the speakers in the mixer say "disconnected" (see below) and the SPDIF becomes the default output. There is no way for me to change this. And there isn't any sound coming from the headphones when plugged into the front panel. (the mic front panel works fine)
I am using the nati've Win7 drivers for the card. Apparently the Win 7 drivers on your site are older than the nati've ones.
This worked fine in Windows XP 32. Any ideas.

Ok guys this is how I fixed the problem on my X-Fi PCI-Express. Open the Creative SB X-Fi Volume panel. Mine is set in game mode and I have 5 vertical sliders for Line-In /Mic, MIDI Synth, Digital-In, and the last one will say one of three things either Digital-In, Microphone, or Mirophone FP. At the top of the?slider there is a tab which brings up a drop down menu. Mine was default set to Digital-In, I switched it to Mirophone FP (tried Microphone first and it worked but the FP sounds better for me) and cranked it all the way up and my problem was solved. Very frustrating one though as there is no documentation that led me to the fix it was just playing around with it till I could figure it out.
I hope this at least helps some of you out.

Remote not working right

I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Solved!
Go to Solution.

netmouse wrote:
I've had my FIOS about 2 months, put new batteries in remote and it is still not working right. Some things work fine. Other things stopped working - can't delete a DVR show, can't change channels with one digit, but it will if I add all 4 digits, info box on bottom of screen never disappears (unless I hit exit). What's wrong?
My second TV set-up is OK.
Might not even be a remote issue. Have you tried rebooting the box?
If you do think it's the remote it's still under warranty.
You can get a free replacement easy within the dvr's menu.
Here is a page that tells you ways to get a replacement.
http://www.verizon.com/support/residential/tv/fiostv/remote+controls/troubleshooting/questionsone/12...
Get a new remote and if you still have the same issues then you'll know its the dvr that needs to be replaced.

Is there any way to redownload iOS 5 my iPod touch 4 th generation white 32 gig is not working right?

My iPod is not working right. It's slow and lags and just doesn't work and always exits apps. I was if there was any way to redownload ios5 because it does the same things after I've reset about 4 times. Please help! It's even lagging why I am typing this. The thing that I checked below are all of the things that are not working on my iPod.

You cannot reinstall iOS without doing a restore. But you might first try a software update. If you have iOS 5.0 or 5.0.1, you can update to iOS 5.1 by going to Settings > General > Software Update.

TS1398 Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automaticall

Hello, my iPod touch is not working right. It says its connected but if I select App Store, safari and other apps that require wifi pops out a note saying either"error loading" or "cannot connect to iTunes Store" and would exit the app automatically. Please help.
Thank You.

See:
Can't connect to the iTunes Store

IPad 2 was updated to latest iOS 7 and has been not working right since. I have tried to do a restore but still continues to go into reboot mode by itself and very erratic. Can no longer trust it. I tried to complain to Apple but have to give them 20 buck

iPad has not worked right since it updated to latest software. Tried to question Apple about it but it costs 20 bucks just to lodge a complaint. Is this normal Apple behavior or am I missing something. Also anyone else having issues with upgrade to iOS7. It was working great until that point and now goes into reboot mode often and sometimes will continuously reboot several times. I have tried to restore but that didn't clear the problem. Any thoughts or help would be appreciated.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

HT4623 My iPad mini is not working right ?? On some apps

My iPad mini is not working right on some apps

You can always try to reset your device and see if it helps matters any:
Device Reset (won't affect settings/data/music/apps/etc)
1. Press and hold (& continue to hold) BOTH the Sleep/Wake button & the Home button.
2. Continue to hold BOTH (ignoring any other messages that may show) until you see the Apple logo on the screen.
3. Release BOTH buttons when you see the Apple logo and allow the device to boot normally.

Since updating to 706 the sound on my ipad2 is not working right. On videos or music. There is constant distortion and what sounds like interference. Any ideas?

Since updating to 706 the sound on my ipad2 is not working right--on videos or music. There is distortion and some kind of interference at all times. Any ideas?

Has the unit EVER been jailbroke?
If "No," first try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, if you have IOS-7, read this.

T42 keyboard not working right, HELP PLEASE

My keyboard is not working right. If I push the key it wont work,but if I hold the key for a couple seconds then it works was told to replace the keyboard and I did with a new one. But it is still doing it. Can anyone tell me what the problem is. Model # R4U machine type 2378, OS XP-PRO , COA SP2 , S/N L3xxxxx.
Message Edited by scottzilla on 12-15-2008 10:05 PM
Moderator Note; s/n edited for members own protection
Message Edited by andyP on 12-16-2008 07:57 AM

It's the Quick Selection Tool in Photoshop Elements 9 and I'm trying to get the background and make it another layer so I can even out the color of the background then bring down the transparency. Not sure if that makes sense. I'm new to this.... Sometimes the area it will grab can go ...not fast.. but not slow. Sometimes it's like it's just messed up and literally takes 30 seconds to process each move. I rebooted my computer and re opened it and it helped a little. It's not clear what causes it when it messes up and when it doesn't. Just frustrating. It's probably user error because I'm so new at Photoshop. Thanks for your input. I really appreciate it.

Scroll-bar STILL not working right in 10.6.1 update

The scroll-bar is STILL NOT working right in the 10.6.1 update. I am not able to click anywhere on the scroll-bar and have the navigation go there. I have to drag the blamed thing where ever I want it to go. This problem only exist with the recent iTunes 10.6.x updates.

I have the new MacBook Pro 2010, Dell 3007WFP. No mirroring problemsat that or higher res. I was chagrined, however, to find out that while my 2007 15" MacBook Pro had no problems driving the Dell 30", the 2010 17" requires the Dual Link cable for $100 extra. ;>(
But it works fine.
ak

Spam blocker in Outlook 2010 is not working.

I go into the program and add to the list of domains I want to block. It just does not work.
I am blocking them by going into Junk via opposite mouse button and then options and the Block Senders tab and then I click on add.
I add a domain as @donotwant.com click apply and then OK.   I see it in the list even after I close Outlook and go back in.
Yet the emails are still ending up in my junk folder from that sender!!! I have seen this problem mentioned by others on the web.
If this is a bug in 2010 then it should be fixed!! if I am doing something incorrectly, please inform me.   Is there a possible space being added to the end of the string by Microsoft that I can not see but is causing the problem?
(I can not believe that the programmer who wrote this stuff would not use a trim string command to avoid the issue)
(My gosh from a programming standpoint this should be easy for Outlook. Compare the list of blocked addresses to the incoming new emails and block the ones that match it on the list. I think a Junior High School programmer can handle it.
The kid would certainly Use an INString command to pull the domains that are blocked.)
Not blocking these is really annoying. I would appreciate any help offered.
Thank you

Hi,
This is the default behavior for emails sent from blocked senders in case some users want to check the email in the Junk Email folder.
If you want to permanently delete emails from a domain senders, we can set an Outlook rule to do this. Please follow the steps below:
1. Click on Home tab > Rules >
Manage Rules & Alert
2. Click New Rule…
3. Select “Apply rule on message I send”, click Next button.
4. Tick the check box before “with specific words in the sender’s address” in the
Select condition(s) box. Click
specific words and type @domain.com (you need type @donotwant.com) in the box and click
Add button. Click OK.
5. Click Next.
6. Select the action “permanently delete it”. Click Next. Click Next.
7. Make sure the option “Turn on this rule” is selected. Click Finish.
Now, all emails from @domain.com will be permanently deleted.
In addition, we can consider to set block list on the server side to prevent the emails sending to your mailbox.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Safari 5.1.2 Not working right after install

Hi, after installing the update for Snow Leopard safari is not working right. Some pages don't load, and other don't load correctly.
I have to keep hitting refresh two or three times. Also thunbnails are not displaying. Even the apple page comes up looking buggy.
Please help!

Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. First, disconnect all wired peripherals except keyboard, mouse, monitor, and Ethernet, if applicable. Boot in safe mode and log in as yourself. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
During startup, you will see "Safe Boot" on the login screen, which appears even if you normally log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Safe mode is slower than normal, and some things won’t work at all, perhaps including wireless networking on certain Macs. If you usually connect to the Internet via WiFi, and it doesn’t work in safe mode, connect using an Ethernet cable. If you can’t do that, reboot as usual (i.e., not in safe mode) and perform a safe login, as follows: Enter your credentials at the login screen, then hold down the shift key and click the “Log in” button. Keep holding the key until the menu bar appears. In this mode, your login items, among other things, won’t load.
In safe mode, test again. Same problem(s) now?
After testing, reboot (if you booted in safe mode) or log out/log in (if you performed a safe login) as usual.

Command key not working right in several applications

All of a sudden, some functions are not working right, i.e., in PhotoShop when I select the Zoom key I get a minus rather than the usual plus. In Date and Time, I started getting a 24 hour clock. If I go there in System Prefs and change to 24 hour clock, then the readout on my menu bar is for 12 hour clock. Sometimes when I use Command-Q the machine asks me if I want to close all programs rather than just the one I'm attempting to leave. What is wrong?

Hi n,
I have no idea if this might work, but I'd reset the PRAM and SMC.

Block site 1.1.8 not working right

Similar Messages

Maybe you are looking for