Block text in propertional script shows ugly side-effects

If you look at this message (quoted from here, 4th post down),
[quote]
If I was satisfied with your previous answer, I wouldn't have posted at all. It seems to me a lot of T61p owners at TPForums and NotebookReviewForums are having this problem. So far I haven't been too far impressed with Lenovo, going by a 25 page thread at NBR here: http://forum.notebookreview.com/showthread.php?t=181232
[/quote]
the line above the forum.nbr URL looks definitely ugly.
Can this 'blocking/stretching' be switched off?
Message Edited by RealBlackStuff on 12-10-2007 07:44 AM

Yeah, that happens when somebody pastes in a URL instead of using the link button. It has been brought up before and I think it is Lithium formatting problem. Not much Lenovo can do about it except report it to Lithium. Which has been done as far as I know.
T60 2623-D7U, 3 GB Ram. Dual boot XP and Linux Mint.
T400 2765-T7U Windows 7
Registered Linux User #160145
FYI: I am not employed by Lenovo

Similar Messages

How to add text animator to text layer in script?

Hello,
I'm a beginner in scripting and trying to create a script to apply set of expression control and text animator.
I want to add text animator property to selected layer, however I keep having error with the codes below.
selectedLayers[0].Text.Animators.addProperty("ADBE Text Animator");
selectedLayers[0].Text.Animators.addProperty("ADBE Text Position"); //error on this line
What is the correct code?
Thanks a lot.

Thanks Dan, that works!
However, I hit another road block. I tried to add a range selector under the animator group with the codes below and both returned error.
myAnim.property("ADBE Text Animator Properties").addSelector("ADBE Text Range Selector");
myAnim.property("ADBE Text Animator Properties").addProperty("ADBE Text Range Selector");
After reading this post. how to access text proprety
Its seem text animator has different codes for accessing different properties.
I've searched on the Adobe scripting guide and couldn't find the exact code for the property (e.g. ADBE Text Position 3D ).
It would be much appreciated If anyone could recommend a scripting book for After Effects.
Thanks.

TextView. Spaces of line truncated. Text is hAlign to the left side

Hi,
I have a text to show in a TextView.
The text in my internal table (string_table, soli_tab) or in a string is correct, has the correct format with spaces.
The problem is when the textView paints it. The whole text is hAlign to the left side without bearing the blanks in mind, Only simple spaces appear .
I have tried to modify the attribute condense of the properties(wdy_attribute_format_prop) of the node/attribute of the context, but it does not work.
The text appears this way:
26489 3.712,00 *Alquiler base 01.11.04-30.11.04
27772 241,71 *Tasa de Residuos Sólidos 2006
28008 1.219,11 *Importe gastos periodo: 01.01.2006 31.12.2006
28362 3.827,07 *Alquiler base 01.12.05-31.12.05
28797 3.712,00 *Alquiler base 01.12.04-31.12.04
30216 1.172,05 *Importe gastos periodo: 01.01.2005 31.12.2005
30656 186,95 *Importe gastos periodo: 01.01.2004 31.12.2004
100000339 1.219,11 *FRA.0000028008-Importe gastos periodo:
100000340 241,71 *FRA.0000027772-Tasa de Residuos Sólidos
100000341 3.976,32 *FRA.0000000439-Alquiler base 01.01.07-3
100000818 3.976,32- *Alquiler base 01.02.07-28.02.07
100000818 3.976,32 *Cont.post.alq.base haber 01.02.07-28.02.07
100000820 3.976,32- *FRA.0000000439-Alquiler base 01.01.07-3
100000820 241,71- *FRA.0000027772-Tasa de Residuos Sólidos
100000820 1.219,11- *FRA.0000028008-Importe gastos periodo:
120001523 6.400,00 *Fianza en metálico 01.10.2004
180000317 3.976,32- *Alquiler base 01.01.07-31.01.07
Have you some solution?
Thank you.
Tomás.

Hey Priya, thank you for the link..
did you understand the solution provided? - i did not.. and i was wondering if you did.
Because, how will adding another textview help.. and what is ALT+0164 option.
Thanks...

InfoPath 2013 - Rich Text box - Expand to show all text option not working

I have create an InfoPath form and created a view which will be used for printing. I have a rich text box in this print view and the scroll option for this rich text box is set to "Expand to show all text". However, it is not working and it doesn't
expand the size of the text box based on the content length.
same thing used to work in InfoPath 2010.
Any suggestions?
Thanks,
Neelesh

Hi Wendy,
Here are the steps I have used:
1. On default view added a rich text box.
2. Created another view called Print and mapped it to the same Field which I added to default view
3. Set the Wrap text and Expand to show all text on both the Rich Text Box Properties - in default view and in Print
view. Also set the height of the rich text box to auto.
4. Set the print views as the print view for default view
5. Deployed the form to SharePoint Form Library
6. Opened the form in browser
7. Entered the content in the rich text box in default view. It expands well if I have much content
8. Clicked on Print preview and that opens up the print preview and it shows the rich text box only one line in height and with scroll bar
I missed to mention that it is a web browser enabled form and I am using InfoPath 2013 and SP 2013.
It does work fine in InfoPath client.
Thanks.

Text Frame Options. Room for Side Heads added without warning

Hi -
I just got asked this and have no clue how to help. Anyone know what this is?
Every now and then, my Frame file will –apparently on its own – reset most of its text frames into having room for side heads. Makes for lots of bad labels on graphics – everything’s suddenly offset and scrolling off the bottom.
This will happen suddenly. It will usually be only one or two chapters in a book, but if I ignore it has been known spread like the black death throughout the book.
The only solution I’ve found so far has been to revert to a backup or touch each text frame individually. Setting properties for two at a time messes up location on the page.

HI -
Here's what I heard back.
I believe it’s for everything except main text flow, including headers&footers on master pages, and special elements on unused master pages.
It appears to be spontaneous, but I can’t guarantee that.
I don’t use MIFs, and I’m pretty sure no one else does.
Yes to formatting imports , because we frequently change variables in one chapter and copy them back to the rest (esp date doc was last edited – not same as print date per our regulatory agency.) Likewise conditional text. We know not to copy from a file into itself in a book, although it has happened and we do exchange manuals between revisions at times.

Text is truncated on the right side of a text field. How to solve?

Hi group,
I use CR for the .NET Platform 10.2 (VS 2005/.net2.0). In several cases the texts in my crystal reports are truncated on the right side of the text fields (which can show more than one line and which are set in the way that it increases if more than one line is needed).
I created the CRs with CR in VS 2003. Then I migrated the VB.net project from VS 2003 to VS 2005. Then, when I opened a CR in VS 2005 and saved it again I got the message that it will be changed to the newer version if I click "yes" (or perhaps it was the "ok" button). I guess that was the moment the CR was migrated to the newer CR version.
Because of the truncation problem I created one of the CRs completely new with exactly the same settings (i.e. the heigths of the sections, the widths of the text fields, and all the other setting are completely identical to the CR created in VS 2003). Interestingly, the texts are truncated in none of the text fields any more.
Have I done the migration correcty? (Is it really opening the CR and saving it an saying "yes" or should I rather have done it in another way?)
Does somebody of you already have had this kind of problem? How could it be solved without creating all CRs anew?
Does recreating a CR which shows truncation of texts really solve it, or is truncation caused by something else, perhaps a certain property of a CR etc?
The "printer" is set to "no printer" in all CRs. The truncation does show independent of whether the registry entry "HKEY_CURRENT_USER\Software\Crystal Decisions\10.2\Crystal Reports\Export\PDF\ForceLargerFonts" is set to 1 or to 0.
Thanks for help in advance
Kind regards
Michael

>
Ludek Uher wrote:
> There is a fair number of kbases in the kbase search (https://www.sdn.sap.com/irj/sdn/businessobjects-notes). Most of these refer to fixes. It may be a good idea to get the latest SP for your version of CR - CR 10.2?) and see if that helps. The latest SP for CR 10.2 is here:
>
> https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
>
>
> Ludek
Hi Ludek,
I already installed crvs05sp1 a few months ago (still traceable by the dir "C:Program FilesCommon FilesBusiness ObjectsPatchesCrystal Reports for Visual Studio .NET 2005 Service Pack 1" on my computer).
Unfortunately, I cannot find any fitting entry in the kbase. If I search for "text truncation" or "text truncated" i get results but they are about pdf or word or fixed truncation problems in older CR versions.
It seems as if I am the only one who has to face this problem :-).
Best,
Michael

Are blocked texts still "billed" by the carrier?

My mother does not a texting plan because she never texts and only receives texts from spammers. While I know that the blocked texts from spammers will not appear on her iPhone, will they be counted by the carrier (in this case AT&T) as an incoming text message, even if it is not technically delivered? Obviously it will save her the headache of receiving unwanted texts, but will she still be billed for them?

She can forward them to AT&T directly at short code 772-6. She will then get an automated reply asking her to reply with the senders "sent from" address (these texts with AT&T are all free as well). If they respond that they cannot identify the sender (happens often with short codes), she can call customer care at the number in the text and ask them to block that short code for her account.
Since she is paying per text, I think that reporting throught the automated SPAM report system will also automatically credit her account for the billed spam messages, but you might want to call AT&T and confirm that actually happens.
you should look at http://www.att.com/esupport/article.jsp?sid=KB115812&cv=820#fbid=QV-EvjTpxgp

Is it possible to make a text box cycle/rotate through text, like a slide show does?

Is it possible to make a text box cycle through 3 or 4 separate pieces/groups of text, like a slide show does with photos? So that when I open my site a text area says "Statement 1", then 10 seconds later it changes to "Statement 2", then 10 seconds later it chagnes to "Statement 3", etc.
Its that possible with a text box? My desire is to have 3 or 4 testimonials that change every 10 seconds.
You can see that right now it's a single testimonial:
www.kmlstudio.com
All help is appreciated
Thanks!
Kevin

Right. Some plugins have zip file downloads while others are just copy & paste.
In DW, go to File > New > Blank page > JavaScript.
Copy & paste the Cycle plugin code into your new JS page.
SaveAs cycle.2.9.81.js in whichever site folder you normally keep scripts.
Link your HTML page to your new cycle script:
Insert > Script > Script (browse to folder containing your cycle script). Hit OK.
Don't forget to add a link to the jQuery core library, too. Plugins don't work without it.
Nancy O.

Translate the harcoded text written inside Script Editor in Adobe forms

Hi Experts,
In Adobe form, I have hardcoded a text inside the Script Editor.
Now i need to maintain translation for it in another language. Is it possible?
I have checked option Goto -> Translation. But that text is not available there.
Kindly give me some suggestions!

I know what you are trying to do and that is NOT the way to handle it. haha This is EXACTLY why I never put texts to display within my script (Javascript). The better way to do it is this.....have a hidden text element on your form. Then show/hide it using your script. Since it is PART of the actual form, you can then translate it like you do anything else on the form. Works great!
If you absolutely HAVE to do the text as a pop-up or something "off form", then there are ways to do it very similarly but takes a little more thought/work (ie. have your script read the text element's text and use that in your pop-up...again, since the text element is ON the form, you will get the correct translation.)
Hope this helps!

(Enter the text shown) why this showing in firefox persona sign in, there is no text???

Enter the text shown why this showing in Firefox persona sign in

That is a CAPTCHA from https://api-secure.recaptcha.net
Make sure that you do not block that image.
You can check if you can see that image in Tools > Page Info > Media
See also:
[[Images or animations do not show]]
[[Websites look wrong]]

How to enter the data into data block text item which has an LOV associated

Hi,
I have a data block, one of the data block text item has an LOV assigned. when I populate this text item using the LOV and do "execute_query", it is taking the value in the text item and adding it to the search criteria, but when I enter a value manually in that text item and do "execute_query" it is showing me an alert(which I created) "Please enter a value".
My question is, why is not taking the value that I enter manually? Looks like before executing the query, this field is getting empty
How to avoid this problem and make sure that the value entered in the text item is added in the where clause of the query?
Any advice?
Thanks in advance
R.G

Problem solved!
Before doing execute-query, all the text items are being cleared,so I used a global variable to store that value
Thanks anyway
R.G

On iphone 4 how do i block text messages that are coming from an email account?

on iphone 4 how do i block text messages that are coming from an email account?

There is no way to block text messages. You may wish to report them to your carrier

Some of my text messages do not show up on Verizon online usage

My husband received a text last night from a friend. Then 2 minutes later that same friend texted me. It shows this friends text on my online usage, but no his. It has since shown messages that we've sent to each other so I know it's updated. Why does this happen?

We both have the same exact phone. Droid Razr M. Thanks though!

Text input box to show in another text field

Hello,
I have a text input box (Text1) showing during a certain label on the stage. On another label there is another text field (Text2) that is not input-able. This second text field (Text2) should show whatever the user has inputted in the first text input field (Text1).
Both of these elements are not symbols and right now they are both text elements.
Does anyone know how to do this?
Thanks,
~iana~

I believe the inputField is set accordingly. And including your reply, here's what I've got on my stage:
sym.$("Name").attr('contentEditable', true);
var inputValue = sym.$("Name").value;
// other text
sym.$("Signature").html(inputValue);
Thus far, this does not work. "Name" field is Text1 (inputField) and the "Signature" is Text2 (text box)
I'm new to all this so I've prob got something wrong...do you know what I should adjust?

How to block text messages but not calls from a specific number

I want to block text messages from my father but not his phone calls. Is there a way to do this? I have an iPhone 5, but don't want to upgrade to IOS7 yet.
Thanks!

You have a fantastic phone, joy3141. I double checked features for the iPhone 5 and confirmed there's not a way to block messages from a specific contact without blocking calls too. Our Call & Message Blocking http://vz.to/MqEgqB is a great way to block unwanted contact from specific numbers, but it would block both calls & messages. If your dad is on your account and you're hoping to block all of his text messages to or from anyone, there is a text message block available at www.vzw.com/serviceblocks you can add to his line.
Thank you
JenniferH_VZW
Please follow us on Twitter @vzwsupport

Block text in propertional script shows ugly side-effects

Similar Messages

Maybe you are looking for