Block the button of volume

Is possible button block of volume in ip phone 6921, researched in internet, I found the option Minimum Ring Volume but no the Maximum or block the button, locking the volume and set fixed volume.
CUCM: 8.6.2.22900-9
Firmware ip phone 6921: SCCP69xx.9-3-3-2-SR1

You need to mention the call control agent you use, and version, and not just what you want to achieve.

Similar Messages

Bridge CS6 tool tips are blocking the buttons!

When I try to change the layout view (grid, list, etc.) with the buttons on the bottom right, the tool tips appear and I'm not able to click through them. So, basically, when I hover over them, the tool tips are blocking me from doing it.
I look in Prefs for a Tool Tips checkbox and it's not checked right now, but they're still appearing, and still protecting the buttons from being clicked.
Anyone know how to turn them off?
And I have to say this is the most ridiculous problem I ever had with a program. Kinda funny.

I still don't think it's the right checkbox to deactivate interface tool tips as it's in the "Thumbnails" sections of prefs. (And when I switch that on I get tool tips for thumbnails, when I switch it off I do not get tool tips for thumbnails. But the interface tool tips are always consistent.)
Well, I'm again afraid. But this time for my big mouth...
You are very right, I did have a long delay on my machine before the tooltips showed and having the checkbox set to on it seemed directly appearing.
As there are many inconsistencies in Bridge (in fact throughout the whole Suite) this one is very big. Don't have a good alternative short name for it but calling 'show metadata when hovering over' 'show tooltips' is really a very bad approach
The version is CS6 and I'm on a 2009 Mac Pro using 10.6.8 if that matters any.
Thanks, it always matters, especially since this has become a general forum with both Windows and Mac. Different OS and different versions (including detail version number) gives more insight in possible solutions or advice (update etc)
Also, I noticed that if I make Bridge CS6 smaller than the monitor window, then the tool tips over the buttons do not appear over the buttons anymore, but under them instead. The tool tips seem to be set to appear below the mouse pointer. When Bridge is maximized and the bottom of the Bridge window touches the bottom of the monitor there is no place else for the tool tips to go, so they get pushed up... and cover the buttons.
I always have the Dock in sight hence pressing the green button to enlarge my Bridge window to full screen leaves a small free space and as you well discovered has not your problematic behavior with tooltips over buttons.
I would think Bridge should be able to detect the end of the screen, obviously it does because it knows to move the tool tips up so they don't appear "off screen".
They should use this detection to determine if the tool tips should appear above or below (or away from the screen edge) the mouse pointer.
Agreed
I'll stop calling it a bug and switch it to "oversight". Bottom line though is the tool tips still block the buttons and shield them from being clicked.
Oversight is the correct word, but besides the above described improvement they really should get rid of the name tooltips in thumbnails and add an option to really hide or show all tooltips as you would expect in a proper application
Thanks for staying tuned and clarify!
While the Bridge team tries to read most of this forum it might be wise to make a feature request for this, are you willing to do so since this is your discovery?

All of the sudden my music will not play nor will sound play on games or texts. It will work when people call but I can not push the buttons for volume control either. Anyone help???

Help

Follow basic troubleshooting found in your user Guide for your phone.
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
#1: Reset: http://support.apple.com/kb/HT1430
#2: Restore: http://support.apple.com/kb/HT1414

How come the volume on my ipod touch is turning up when im not pressing any buttons? any time i turn it down it always goes back up like im pressing the button!

did something get stuck in the button?

i think i just need a new ipod. ive tried even turning up the volume and the button isnt responding. something is wrong with the button. there is also some minor damage inside the ipod i think as well, but im pretty sure my warrenty is up because ive had this ipod for so long. will i be able to send my ipod back into apple and get a new one?

TS1393 I cannot eject my iPod using either itunes or the eject button on bottom tool bar beacuse it says something is in use by another application or "The device 'generic volume' cannot be stopped because a program is still accessing it" Synced new iPad

How can I eject my ipod when neither itunes not the "safe to eject" button will allow it. Itunes says "...cannot be ejected because it contains files that are in use by another application." The safe to eject button says "The device 'generic volume' cannot be stopped because a program is still accessing it." The has never happened before. The only thing new is that I added an iPad yesterday. Thanks.

Go to your computer's System Tray and try ejecting. If you can't eject, there is an application that is trying to access your iPod.
Go to http://technet.microsoft.com/en-us/sysinternals/bb896653.aspx and download ProcessExplorer.
Go to http://support.microsoft.com/kb/555665 and follow the instructions under Resolution.
Note that this is a good, general process any time you can't access any file.
In my case an update to RealPlayer installed a program called RecordingManager that was accessing my iPod.

My iphone 5 will not let me control my volume at all. it is turned all the way up. i try to use the buttons on the side of the phone and they dont work and when im on a call i cant change the volume.

Im having trouble with my iphone 5. For about 6 months now i cannot change my volume while on the phone or using the buttons on the side to turn the volume down. I took it to the sprint store so they could fix it and they said they have never had this problem before. Ive owned every iphone from the very beginning and never had this problem before. please help.

Have you tried going to Settings> then tapping on Sounds. and making sure that change with buttons is turned on?

The button on the side that turns my phone to silent does not work and niether does the up volume button. I have tried restarting my phone, I did a soft reset, I checked all my settings, but nothing has worked. Does anybody have any suggestions?

Hello,
I have an iPhone 4 and recently started to have some problems. First, the button on the side of my phone, that puts the phone on silent is not working. I can move the switch, but my phone stays in silent. However, If I plug my headphones in, Then I can hear everything like I am supposed too. Also, my up volume button does not work. This is with the headphones also.
I have tried doing a soft reset, I reset all of my settings, I updated my software, I restored everything back to factory settings, and nothing has fixed it. I bought it from best buy and can send it in for service, but the last time I sent a phone in, it took them 3 months! and I really don't want to go without my phone that long.
Does anybody have any suggestions?
Thanks so much!!

Sounds like it either believes that there are headphones plugged in, or the switch is broken.
Why in the world would you take it to Best Buy for service? Take it to an Apple Store. They can replace it on the spot if it's defective.

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

My ipod nano 6th gen doesn't start. When I plug it, only blink the apple logo on the screen. I try to reset it holding by 8 seconds start button and volume down and doesn't work. My Ipod doesn't have any shock or water damage. How can I do?

Hey rulosrojos,
The article linked below details a number of troubleshooting steps that can help restore functionality to your iPod nano.
iPod nano (6th generation): Hardware troubleshooting
https://support.apple.com/en-us/TS3474
Sincerely,
Allen

I forgot my ipod password and i didnt use it for along time so it wont even connect to itunes plus it fell in the toilet so my home button and volume button doesnt work what do i do?

I forgot my ipod password and i didnt use it for along time so it wont even connect to itunes plus it fell in the toilet so my home button and volume button doesnt work what do i do?

Place the iOS device in recovery mode using this program
RecBoot: Easy Way to Put iPhone into Recovery Mode
http://jaxov.com/2010/05/recboot-iphone-recovery-mode/and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
Enter DFU mode without home button or Power Button | technoNix
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button

We can hear audio, but video blacks out every few seconds; picture comes back when we hit the tv's volume button. Everything seems to be plugged in well. The picture even starts out being sort of dim. And it goes through phases of working fine but then will randomly start blacking out again. Any ideas?

Welcome to the Apple Community.
Have you tried turning the TV off and on again.

Change how many % does the up/down volume button jump

Hello!
I know that this question isn't very important nor many people have thought of that issue.. but I find it a little bit irretating.
So..my question is : Are there settings (if yes - where are located) for adjusting how many bars does the volume change when pressed the up/down volume button. For example when I press the up/down volume button the volume raises or decreases with 2 % from the 100 % maximum.I would like to change it to lets say 10 % ..
The model of my laptop is A500-1C0.I am sure that this function though (if it exist) could be reached in the same way on many other models.My operating system is Windows 7 Home.
Thank you in advance.

Realised on the way home last night that the radio presets would be stored in the MuVo2 and not the FM remote so no battery in the FM remote.
And yes my guess would be that the button cell would be for when there is no AC power and no LiIon battery installed.
Maybe it's a smilar deal to the flat cell battery on PC motherboards.
Can last years.

Enabling and disabling the button in the multi record block

hi all,
i am using
Forms [32 Bit] Version 6.0.8.24.1 (Production)
Oracle Database 10g Release 10.2.0.1.0 - Production
i have a multi record block each block contains a button(button is to approve the record in terms of changing the status)
i have the items like date,remarks and button
the button should be enabled if the remarks is not null otherwise it should be disabled.
for this in pre-record trigger i have written
if :record is null then
   set_item_property('button',enabled,property_false);
else
      set_item_property('button',enabled,property_false);
end if;what problem is enable and disable is impacting on all the buttons in the block. in other words if first record's remarks is null then all the records button is disabled. if first record's remarks column is not null then all the records of the button column is enabled.
i have to make enable and disable the button for the corresponding record.that means if first record's remarks column is not null then only first records button should be enabled others should be disabled.
Thanks..

You need to set the No. of items displayed to 1 as Ammad had said, additionally you can set the X and Y Position (Just Y will do and having fixed X) of the button depending upon the current record.
can u explain this part alone bit more (setting the position of x and y)You need to calculate the variable Y_POS depending upon the current position of the cursor that is the current record.
You can find the current record Y_POS using combination of
V_CURRENT_RECORD := :SYSTEM.CURSOR_RECORD;
V_TOP_RECORD := GET_BLOCK_PROPERTY ('BLOCK_NAME', TOP_RECORD);
V_ITEM_Y_POS := GET_ITEM_PROPERTY ('ITEM_NAME', Y_POS);
-- Also needs to add the Y_POS of the relative other items in the muti-record block
V_HEIGHT := GET_ITEM_PROPERTY ('BUTTON_NAME', HEIGHT);
-- Note :- TOP_RECORD Returns the record number of the topmost visible record in the given block.
V_Y_POS := V_ITEM_Y_POS + ((V_CURRENT_RECORD - V_TOP_RECORD) * V_HEIGHT);
-- You will need to add Distance between Items in records if anyThen you can Set the current Y_POS of the button.
SET_ITEM_PROPERTY ('BUTTON_NAME', Y_POS, V_Y_POS);
[/code[
Hope this helps
Best Regards
Arif Khadas
Edited by: Arif Khadas on Feb 24, 2011 4:58 PM

Having problems us ng my ipod 7g Nike Fitness. When running when I press the button between the volume buttons, I get a different action almost every time.

I am having problems using my ipod 7g with Nike Fitness. When running when I press the button between the volume buttons, I get a different action almost every time. And usually I end up either turrning volume up very high or ending the workout. I need to be able to pause workout, and get spoken feedback regarding time, distance, and pace, that's all. I'm using a Griffin brand armband, that covers all of the buttons. I've read the online manual. no help. I'm just about ready to return it and go back to my 5th gen with its smaller song capacity and no blurry. Any help or suggestions very welcome.

Jeff:
I have had both good and bad experiences with Acronis True Image. I got the recent copy of ATI via a Newegg.com bundle. I haven't tried it yet on any Windows 7 editing systems. ATI installs some services that I would rather not have running in the background.
What made you change from ATI to ShadowProtect Desktop Edition?
Are you running Windows 7?
What do you see as advantages to running ShadowProtect Desktop Edition as opposed to Acronis True Image?
Thanks

I am having trouble uploading photos to facebook. I saw a block tab on the upload button, I clicked it and a mozilla window opened. I didn't understand it and then ended up blocking the facebook loader. How do I undo this?

When I tried to load picture to facebook it wouldn't load. Then in the upload pop-up I noticed a block tab over the upload button. I clicked it and a Mozilla window opened with all kinds of selections I didn't understand. In an attempt to get out of it I blocked the uploader now in FB and can't figure out how to make Mozilla unblock it.

That was probably an Adblock Plus "block tab" that you clicked.
Open ABP prefs and look at the top section of the Filter Rule section > My Ad Blocking Rules = right-click the rule that you just set and use '''Delete'''.

HT1688 My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

My volume down button does not work on my phone and the button on the top of my 4s does not work..I bought the insurance on the phone from apple when. It was new

Check the status of your warranty here:
https://selfsolve.apple.com/agreementWarrantyDynamic.do
Make a Genius Bar appointment to have your iPhone checked:
http://www.apple.com/retail/geniusbar/

Block the button of volume

Similar Messages

Maybe you are looking for