Block the standard user list

i want to block the standard users(adinistrator, overseer, owner) during the process
initiation.
regards
Sukumar

Hi Sukumar,
You can not block the standard users, but you can assign all standard users to one use like initiator.
Regards
Srikanth

Similar Messages

In regard to Time Machine. I have two accounts one is an admin account, the other is a standard user account. When I implement Time Machine when I am logged into the Admin account, is the standard user also backed up?

in regard to Time Machine.
I have two accounts on one Macbook Pro running OS 10.6.8. One account is an admin account, the other is a standard user account.
When I initially implemented Time Machine I was logged into the Admin account. I allowed Time Machine to erase the drive and backup the computer. Is the standard user account contents also backed up?
Also after I completed the Time Machine backup session, I turned off Time Machine and removed the portable hard drive. I plan to return in to Time Machine after being away from the portable hard drive for approximately a month. After a short interruption of approximately one month, when the Macbook Pro is reconnected and Time Machine is turned back on, will Time Machine create a new instance of a backup? WIll the back up contain the standard user account changes?

Time Machine backs up by default all the user accounts.
When you reconnect the backup drive after one month, Time Machine will do an incremental backup and it might take a while minutes to hours depending on how much has been changed. With a gap of a month, Time Machine will have to do a lengthier than normal survey of both drives to see what has changed, so it might take some time preparing for the backup. The backup will include everything that has changed since the previous one.

Windows 7 Elevating using UAC, does not change the standard users setting, it runs the Admins settings

When elevating privilege for a standard user using an admin account, the UAC runs the application under the admins account "user" and not the standard users account "user", the problem is that doing so, it does not change the standard
users settings
In this example, trying to change the "Check for Updates Automatically" as the standard user, is grayed out, you have to be an admin to change this. This is a design of Java.
When you right click and run as an administrator, the option is no longer grayed out and can be deselected, however, this only changes that setting for the admins specific "user", not the standard users specific "user" the admin is elevating
privilege for. as illustrated below.
Is there a work around for an admin to run his credentials but elevate the standard users session instead of his own or some other way to set the standard users setting when admin credentials are required?

Hi,
Based on your description, I understand that you want to disable
Check for Updates Automatically option for standard users in Java.
You can achieve this target by editing
EnableJavaUpdate registry entry. For more details, please refer to following articles and check if can help you.
(Please back up before that registry operation. That will help us to avoid unexpected issues.)
How to disable Java Update in Windows
7
Disable Java updates with
Group Policy
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
However, this issue is related to Java product. I suggest that you should contact with Java product support.
I believe we will get a better assistance there.
If anything I misunderstand or any update, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How do I stop my computer from going to the standard user account when I wake it from sleep

When I wake my computer from sleep it logs on the standard user account. I need it to go to the administrator account so I can log on to that .

Hello rnash62. I understand you'd like to automatically log into your Administrator account when waking from sleep.
What notebook do you have? Please identify it by the product number. This document can show you where it is located.
What version of Windows are you running?
Once I have this information I should be able to provide you with instructions.
I hope you have a great day and an amazing weekend!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Drop me from the forte-users list

Please drop me from the forte-users list. [email protected]
Thanks

I think you may need to contact customer service regarding your request. Just click the link below to see the instructions on how you can get in touch with the Support team ;
http://community.skype.com/t5/The-Skype-Lounge/How-to-Contact-Skype-Customer-Service/td-p/2056783
IF YOU FOUND OUR POST USEFUL THEN PLEASE GIVE "KUDOS". IF IT HELPED TO FIX YOUR ISSUE PLEASE MARK IT AS A "SOLUTION" TO HELP OTHERS. THANKS!
ALTERNATIVE SKYPE DOWNLOAD LINKS | HOW TO RECORD SKYPE VIDEO CALLS | HOW TO HANDLE SUSPICIOS CALLS AND MESSAGES
SEE MORE TIPS, TRICKS, TUTORIALS AND UPDATES in
| skypefordummies.blogspot.com |

When people activate connection keys, they don't show up in the Admin users list. Why?

I send people their key by e-mail. In most cases, when they click on it and it loads Contribute and they plug in the password, it will show up in the Admin listing of users. Other times, the same process is followed but they don't show up on any user list. What can I do to get them listed?

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

L_TO_CREATE_MOVE_SU : Block the standard message

Hi ,
I am using the FM 'L_TO_CREATE_MOVE_SU' which simulates the functionality of LT09 transaction ( This FM only simulates LT09 transaction , TO is not created ) although I get the message that the Transfer order no XXXX is created .
This message is just a virtual message as the TO is not yet created.
Now I need to block this standard message which is coming from the FM as after running this FM their is some coding that I need to do .
Tried checking the Sy-subrc value just after the FM but the message come before that even.
Please advsie ....
-- Mohit

Hi
Try adding below exception in exception part :
Error_message = 99 "it can be any number"
Hope it helps.

Blocking the crm user to type the manual bill to / ship to columns

Dear Experts,
In SAP business one 8.81,
We are using SAP Business 8.81. We have different locations set up for "ship to address" in business partners master data and all the ship to address have been saved as unique locations so that when a sales order or a work order is created, the location address is automatically populated on choosing the location of ship to address from the drop down menu
What many users are doing: When creating work orders, they input the business partner code, choose the location and then change the ship to address to whatever they want. This creates problems when converting the work orders to delivery. I want to restrict the capability of changing the ship to address while creating work orders and sales orders. How do I do it? Do I have to do it in business partner master data or in work orders or is it some kind of user authorization that I am missing.
Please let me know.
Thank you.
Manivannan. M
Edited by: manivannan muthu on Mar 28, 2011 1:00 PM

Dear Narayanan,
Thanks for your reply,
We have to write our own code to block the user to enter information on the bill to / ship to column. Sir, I searched for the long time I did not get related code for that, can you help me in this.
With regards
Manivannan. M

Urgent..i want to block the portal users to login multiply....

hi,
My requirement is like this.....
When a user try to login ,and at the if any body already logged with the same user id i want to show the following options to the user
You can:
1.contnue with this logon and end any other logons in the system
2.continue with this logon without ending any other logons
3.Terminate this logon
And also want to show the other logged in users system id and system password.

Hi,
You can write your own custom login module :
http://help.sap.com/saphelp_nw04s/helpdata/en/46/3ce9402f3f8031e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/07/0ce13d8ee4535ee10000000a114084/frameset.htm
Check session id in the code of your custom module :
InitialContext context = new InitialContext();
Object obj = context.lookup( "remotesecurity" );
RemoteSecurity remoteSecurity = (RemoteSecurity) PortableRemoteObject.narrow(obj, RemoteSecurity.class);
RemoteSecuritySessions sessions = remoteSecurity.getSecuritySessions();
Get a list of users logged on each server node in a clustered environment
List all users who are logged in
Hope this help you
Jakub Krecicki

Block the customer user EXIT

dear sap gurus
is there any user exit can enable us to block the customer (XD05) when using a specific document type
EXAMPLE:When using a document type X trigger transaction (XD05)

Hi,
Donot use call transaction in any of the user exits or badis
I will give you an idea but not the source code. Find a suitable exit or badi for transaction F-02 or FBZG ( as per your requirement ) . In the exit use class CMD_EI_API method MAINTAIN_BAPI and populate the values as required
for blocking/unblocking customer. Thiswill only get executed when a commit work is invoked by the transaction.

I need a logout script that will erase the standard user account data after logout.

I have a lab of 35 Macbook Pros and I am trying to make it where when the user logouts, it will erase the data after they logout.
I have found several articles about deleting user accounts when they login through AD, but this is not the case.
Any help would be much help!

Then when they are at those system they do not Login and if they do have to enter a password it is whatever it is for the Base user account that is setup. Right?
I'd look at the Mac KB system to see if you can restrict saving to the local HDD but yet allow saving to a thumb drive or not.
To do what you want the system would need to keep track of all files saved from time X to time Y, and those times would be every changing. Not sure you are going to get there from here.
Not sure what you mean by Lab machines. I've worked in and gone to school at a Graphic art school and they have hundreds of Lab Mac's that each student must log into with there own user account when in different classes and when saving any of there work it gets saved on the server so it can be retrieved by them when they log into another system someplace else throughout the school or when using their own computer and connected to the schools network.
I wish you the best of luck with this project.

Adding yourself to the project user list (again) overwrites permissions

Hey there,
When you're in a project and you're the project leader or have admin right and you add yourself again (lets say by mistake or some other unknown reason) when updating the project... your RWDA permissions are replaced with R and you loose the project.
Is there any way to fix this? We can't expect the user not to make mistakes (Asking this cause it already happened).
Cheers,

Hi Parvatha,
Are you using B1 Studio? Anyway try to clean the solution first then rebuild it. This would re-copy files to the output directory, that contain your changes.
Best regards,
Pedro Magueija

Windows 2008RS Server standard user send message to anyone on server including the administrator

Can someone help me to setup the standard user send a messages to everyone on the rds. I can send a message from the administrator to users but standard user can not send message back of to each other.

Hi,
In RD Session Host Configuration (tsconfig.msc), please double-click RDP-Tcp. On the Security tab, click Advanced, select Remote Desktop Users group, click Edit, then select Message and save your changes. After making this change any users that
are currently logged on will need to log off completely and back on for the change to take effect.
Thanks.
-TP

Enable and Disabling the Network Adapter with domain user (Standard User)

Hi Guys.
We setup a active directory in our organization. Added client systems(Windows 7 and Windows 8) to the Domain. Domain users are accessing the system with standard users permission. I don't want to give Administrator permissions. But user should able
to Disable and Enable network Adapter without giving the administrator permissions. Please suggest .
Thanks in advance for the help :)

Hi,
According to your description, my understanding is that you want the standard user has the permission to disable/enable network adapter.
I recommend you to implement this function by group policy:
User configuration - Administrative Templates – Network - Network connections
Enable this policy:
Ability to enable/disable a LAN Connection
Besides, you may consider of joining users to Network Configuration Operators Group, detailed information you may reference:
A Description of the Network Configuration Operators Group
http://support.microsoft.com/en-us/kb/297938
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Vista and iTunes shared library - Admin vs. Standard User

Here's a good one.....I am the administrator of the family's Vista desktop computer, my kids are Standard Users. When I log in to the computer and bring up iTunes, I am able to see and access our shared library of music on our Synology DS207+ NAS. When either of my kids log in and bring up iTunes, the DiskStation appears on the left side underneath 'shared' but when they click on it, they are not able to access the music. A dialog box appears with the following message: 'the shared library "Disk Station" is not responding (-39). Check that any firewall software running on either the shared computer or this computer has been set to allow communication on port 3689.'
Their Standard User accounts can access the music on the NAS through mapped drives and windows explorer.
I am running CA (Computer Associates) Security Center and the firewall has the same rules in place for all of our logins. Here is the strange thing, when I change their account type from Standard User to Administrator, they are able to access the shared library of music, no more dialog box with that message. I change their account type back to Standard User and again, they are not able to access the music, and they get that message again.
When I am logged in and enter the 'netstat' command, I see the following entry under foreign address:
NAS:3689 Established
When the kids are logged in, I see the following:
NAS:microsoft-ds Established
I've tried a lot of different things, too numerous to even remember or mention, all with no success. Some troubleshooting measures include:
- change the kids permissions to the music folder on the DiskStation from read only to read/write.
- disabled (not uninstalling) tcpip v6.
- tried every combination of new firewall rule, to include ports 3689, 5353 and every port (and range) in between.
- file and printer sharing is off on the administrator account, and is off on the standard user(s) accounts, but enabling it does not allow access to the library.
- uninstalled Bonjour but once I do that, I cannot see the shared library anymore.
- upgraded Bonjour to the latest version but still no success.
If anybody reading this has other suggestions, please respond.

I actually followed this, but I still had problems that I listed above. Is there any way that when you make changes to one account (even if there is only one main account where changes are made), the changes are automatically (or at least easily) applied to the other user accounts?

Block the standard user list

Similar Messages

Maybe you are looking for