Block ttransfer order confirmation for storage types:

Gurus,
IS there any functionality in WM to vlock the transfer order confirmationfor particluar storage type.
I know LS06 but that wil not allow to create Transfer order.
I need transfer order to be creaed but it should get confirmed.I am not referrring to the set up in movemet type also.
If not how can we achieve this
Please help this is urgent
BR
Avinash

Can you explain in detail what you want achieve, I guess you are looking for the wrong solution.
A TO is confirmed when the material which is to be moved from A to B has reached B.
What sense does it make to have a TO, to perform the movement, and finally not beeing able to confirm this movement?
even further, an unconfirmed TO prevents the quant from becoming available for any usage.
if you dont want that one can put a material into B then you should restrict the putaway into B, which means a TO for destination B cannot be created.

Similar Messages

Transfer Order : Data for storage type search is not defined (A   )

Dear Experts ,
While trying to use the Transfer Order and trying to determine the storage type this error appears :
Data for storage type search is not defined (A   )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
How ever , I have already configured the search and here is the Storage Type search's data in OMLY
1. Warehouse number : W10
2. Operation : A "Stock Removal"
3. Indicator :   E
4. Stock Category : Blank
5. Special Stock Category : Blank
6. Storage Location Ref :10
7. Storage Type : 10E
Please Advice
Edited by: Sap Sap on Feb 24, 2011 10:54 AM

Hello,
The storage type in which you want to place the material or pick the material from has not been defined in the storage type search sequence.
You need to define the search sequence in customization so that storage type is determined automatically when the transfer order is created;
SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search
In this go to determine search sequence and then
for warehouse number W10, operation as stock removal 'A' and in this maintained the relevant the storage type (10E) so that it is determined automatically.
I hope this helps.
BR,
Tushar

Control data for storage type is missing Message no. L3006

Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.

Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason

Sorting for storage type in LM12

LM12 - change sort display so that alpha storage types with bin info displayed before numeric storage type and bin info.
The standard LM12 shows sort order for storage type as numeric storage types first then alpha storage types.
But User is requesting that alpha storage types are displayed first along with relevant info in alpha order. Standard SAP displays numeric storage type first and then alpha storage types.
Plz can any one help us to give solution for above issue.

Hi VIk,
SAP help of the customizing node (sPRO > LE > WM > Strategies > Activate Storage type Search):
If you want the system to search through the entire warehouse number for stock pick, enter "***" (stands for strignent FIFO) as the storage type. The system then will search the entire warehouse for the oldest stock of the material. The entry "+ + +" means that the system branches to the user exit to the stringest FIFO process (MWMT0013).
Regards,
Csaba
Edited by: Csaba Szommer on Jul 27, 2009 8:54 AM

Replenishment Order in WM storage type

Hi xpert
I have a scenario like this
Warehouse Number 200
Storage type 210 and storage type 310
Matreial AB100
The requirement is:-------Whenever stock level at storage type 210 falls below a predifined stock level, system should create a order of stock with multiple of 50 pallets.
appreciate your quick effort on this
Regards
DInabandhu

When ever the stock level in a fixed bin for a particular storage type goes below the min bin qty replenishment is triggred automatically by running RLLNACH1 or manually by LP21 which creates TRs.And TRs are converted to TOs.
In your question you have given the Material, Warehouse
and Storage type only fixed bin is not there.
In the Material Master WM 2 view you need to maintian the fixed bin in storage bin field and the max bin qty and min
bin qty and the replenishment qty in their respective fields.
Configuration:
==========
Spro >> LE >> WM >> Activities >> Transfers >> Define Stock Transfers and Replenishment Control
Click on Maintian WM movement types and check whether replenishment movement type 320 (Std) is maintained.
Double click and maintain a value e.g 1 in the Ref stor type search field
And the same value 1 should be maintianed in the storage type search as below
Spro>> LE >> WM >> Strategies >> Activate Storage type search >> Define Search Sequence
Whse: oper:   Typ In:   stkcat: Splstk: Stoclass:   Wpc
200       A        XXX
Ref sto type   sto loc      1     2     3    4   5    6    7   8 .....
     1                            210
xxx is the type in mentioned in the MMR in WM view 1 in stk removal field.
F3 Back
Click on Define Replenishment Control for Storage Type
whse storage type Mtyp Repl. Replenish
200     210         320             1
Then execute transaction LP21 and enter the parameters like plnt, sloc,whse,sto type, Sto bin (Fixed bin in MMR),Material
Executing will create TR when Stock level is below the min bin qty.
TR can be converted to TO.

Data for storage type search is not defined (E FC1 ) in WM module

Hi friends,
I m working in Ware house management.I have created material document and using the matertial document number in LT06.
I am getting the following error while creating transfer order for material document in T-code LT06.
Data for storage type search is not defined (E FC1 )
Message no. L3007
Diagnosis
Information on the storage type search has not been defined.
Procedure
Contact your system administrator. Note down the values that are within parentheses in the error message.
Please advise me how to solve this error.
Thanks in advance.
Regards,
William

SAP does not know where to put the material.
You usually enable SAP by defining storage type indicators, that you maintain at the putaway and picking indicator fields in material master.
then you setup the storage type search based on this indicators.
SAP can then know in which storage type it shall search for a space to store your material.
As a first step check whether you missed to enter this indicator in your matrial master WM view

ID Point for Storage Type V.S. Value in Storage Type Search Table.

I am trying to perform a GR without PO (MVT 501) for material ABC into Plant 1000, Warehouse number 100, Storage Location 0100.
During creation of Transport Order, the Destinated Storage Type appeared
is 011 (ID point for st.ty.010). However, the desired Destinated Storage Type should be 015 (High Rack) instead of 011.
I have checked the following configuration:
1. At the SPRO->LE->WM->Master Data->Define Storage Type, the value set for Field: Assigned ID (Identification point) for storage type under the Stock Placement Control = 011 (ID point for st.ty.010).
2. At the Storage Type Search Strategy, 015 is put as the first Storage Type, followed by Storage Type 001 (high Rack Storage)
3. And I found out that using LX03 (Bin Status Report) that there is no
Storage Bin created for the combination of the following
Plant 1000, WN 100, SLOC 0100, Storage Type 015, Storage Section 001
Since we do not have any Storage Bin created for Storage Type 015, it will display 011 as the destinated storage type during TO creation.
My question
After I have manually created a Storage Bin 03-01-01 for storage type 015, during the TO Creation, system still suggests 011 as Destinated Storage Type instead of the 015 I put in the 1st column of the Storate Type Search.
I already have the Storage Bin created for Storage Type 015, why the system still fails to pick it but suggests 011 from Assigned ID (Identification point) for storage type.

Dear Karthik
You are right, I did activated Indicator: Activate Storage Unit Type Check for Stock Placement in SPRO->LE->WM->Master Data->Define Storage Type
The Indicator: Storage type with storage unit management was also ticked automatically by system when I selected Indicator: Activate Storaget Unit Type Check for Stock Placement.
Are you trying to say the ID Port defined in Storage Type will have higher priority over the Storage Type value I maintained in the Storage Type Search Table?
I have already maintained the Storage Bin and I still do not understand why system still go for ID port. As far as I know, system will suggest the Storage Type from ID Port ONLY if storage bin in this storage type as their destination are not maintained in first in the other setting.
Quoted from SAP HELP
Identification point for storage type
Identification point (storage type) of the current storage type.
All goods movements that do not have a specific storage bin in this storage type as their destination are first directed to the identification point.
Here the goods are identified and a transfer order is generated for the actual transfer of the goods into the storage type concerned.
Please help.
Edited by: Daimos on Nov 4, 2011 3:25 AM

How to block accounting by MIRO for specific type of documents.

Hello
Is there any possibility to block accounting by MIRO for specific type of document? So you could only account specific type of documents by FBV* or FB*.
Regards
Marcin Obukowicz

Hi,
You can try to make a validation (OB28) which will check the document type based on transaction code prerequisites.
Regards,
Eli

"control data for storage type is missing"

Hi Guys
I am trying to create a goods receipt for an inbound delivery.
I created the inbound delivery VL31N - sucessfully
But when trying to create a putaway LT0F - error
control data for storage type is missing. msg no. L3006
Do i maiantain this control data for storage type in the Material master?
is there anything Im doing wrong?
Can someone help please.
Thanks in advance for the help.
Ahmad Yahya

Hi,
Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
Regards,
Prabu

Storage bin for storage type

Hi ,
How to maintain storage bin for storage type in WM
Regards
RB

Hi
Check it in LS01N.
This will do
Regards,
Raman

Change in Transfer Order for Storage Type & bin

Hi,
I want to change destination bin change during TO Creation. Steps are given below.
a) SPRO : Storage type setting: Two options are t there in stock placement section
                 Storage bin cannot be changed during confirmation
1     Storage bin can be changed during confirmation
I set it to 1.
b) LT06 : TO Created.
c) LT12: TO Confirmation: TO lines are coming grayed out. We can not change Destination storage bin, storage type , and section.
Could you please advice me how to change TO Bins change during confirmation.
Clients requirement: System will pick bin automatically. Print will be taken for this. Once placement is done & some of material are not kept as per TO Bin number. its a different bin,. Now User want to change bin number during TO Confirmation.
Thanks ,
Gupta

Hi Gupta,
In WM customizing - master data - storage type - in the detail data of
the relevant destination storage type you set the flag
'Dst bin ch. during confirm.' from space to 1. Then the destination
storage bin "in general" can be changed at confirmation time.
Additionally you need to setup for the movement types that you are using
that you work with the new confirmation list, see detail of the movement
types, box screen control. (Try changing this setting to '1').
Please also read in the R/3 library - logistics - logistics execution -
warehouse management - warehouse movements - transfer orders - transfer
order confirmation - confirming transfer orders.
Here it is described when the destination bin can't be changed even
with the correct customizing settings.
If you set the indicator for Destination bin change during confirmation
for the desired storage type in Customizing for Warehouse Management
under Logistics Execution -> Warehouse Management -> Master Data ->
Define Storage Type, you will be able to change the destination bin when
confirming a transfer order if, for example, the destination bin
proposed by the system is damaged.
NO destination bin can be entered during confirmation for:
- dynamic coordinates
- return items
- Lean WM (if the destination bin is defined in the movement type)
- posting change TOs
- inventory based on putaway
- additions to existing stock in storage units
- transaction Confirm single item
Please check if your TO is related to one of these cases !!!
Regards,
Mauro

Block Production Order Creation for Particular Order Type

Hi Experts,
I want to disable the production order creation for a particular order type XX01 however there are some existing orders for this order type which should be processed further.
In other words my objective is to -
1. Block new Production order XX01 creation -
2. Processing of order type XX01 should be possible.
Is there standard setting available to achieve this or user exist is the only option..
Regards,

Hi
You can use the user exit PPCO0006 and its function mdoule EXIT_SAPLCOZF_003 to archive that. That function module is called when the user click enter after inputting the material/plant/order type in CO01 then you just need to check the imported value CAUFVD_IMP-AUART which contains the inputted order type then rasise an error message to tell user that the order type cannot be used due to certain reason. The source code need to be written there is very simple.
Regards.
Leon.

Credit Block and Order Confirmation

I have a requirement where the client would like to send out some sort of an 'Order Acknowledgement' as soon as the order is saved if the order goes on Credit Hold. The system is set up to generate an order confirmation when there are no credit credit blocks. Standard SAP would not generate a BA00 output on save since the sales order is incomplete. Once the credit hold is removed and the order is saved the system will automatically generate that output (since the order will be complete) but till such time as the credit hold is not removed how can I generate an output to be sent to the customer just to indicate that their order has been received?
Suggestions would be greatly appreciated.
Thanks in advance.

Hi
Create a new Output Type (Copy of BA00) and assign the same in your Output Procedure in NACE Transaction. For this new Output Type do not maintain any requirement or maintain a new requirement (can be created in VOFM) as per your logic and assign the same for your new Output Type. You may also check the Requiremnt 9 and 11 if that is of your any use.
Regards
Amitesh Anand

Need help on sales order confirmation out put type

Hi Team,
Please help on this issue.
In our sales document types order confirmation is happening through the inboud idoc, user requrement is once order is confirmed immediately sales order confirmation output type should send sucessfully, but the problem is
Inbound idoc is using the sales order and blocking at the same time RSNAST program is using this sales order for sending the output type but not able to send due to the sales order is blocked by inbound idoc.
Could you some body help me on this how can we proceed on this.
thanks & Regards,
MK.

Check the Dispatch time of the Output type in transaction code :NACE. You need not execute RSNAST00, if the despatch time is set to 3 ( Send with application own transaction ) or 4 (Send Immediately). The output will trigger automatically after the sales order is saved.

LP24--Replenishment for Storage Types with Random Space Management

Hey Everyone,
I'm new to the SAP Community Network so thanks in advance for all your input. I've seen numerous posts that have improved my understanding of SAP already.
My question is about LP24. I would like to know if there is a configuration that will prevent invalid replenishment requirements from being listed with other materials that require materials staging and conversion to transfer order.
Here is my problem. We have thousands of materials, with valid replenishment indicators set that are either out of stock or all stock is in the forward pick storage type already. However, I am required to click through all of the invalid requirements to assure that I pick up my valid requirements (materials with additional stock in an overstock storage type that can be replenished to a forward pick storage type). Is there any way to filter the invalid requirements out?
Thanks again for all your insight.
Marvin

Im facing similar situation.
Did you got any feedback here in the forum?

Block ttransfer order confirmation for storage types:

Similar Messages

Maybe you are looking for