Block upon stock removal indicator in Storage type master data

What is the significance of "Block upon stock removal" in storage type master data. Would it work if the storage type is bulk storage and SUT active?

The config setting with indicator 1 will stop you from creating  more TOs for a bin in st type 425 if there are already open picking TO for that bin. In other words lets say you have a stock of  material  u201C79010460u201D in st type 425 u2013 B20B bin and you have created a picking TO from this bin unless you confirm this TO no more picking/stock removal TOs will be allowed and the bin will be blocked. You can see that block on bin in LS06 transaction. Once the TO is confirmed the block will be lifted automatically from the bin to create new Picking TOs.

Similar Messages

  • Block manual stock removal  for a storage type

    Hi,
    Is there any configurational setting where in we can block manual stock removal (i.e creation of TO with mvt type 999) for a particular storage type.
    Thanks
    Prakash

    Hi,
    Try using the transaction LS05, give the storage type and the bin range to block all the existing bins.
    But i am not sure if there is any setting at the movement type level.
    Aktar

  • Stock removal FIFO in storage types

    Hi...
    Multiple storage types AB01, AB02, AB03, AB04 (high rack storage types) are there in EWM warehouse.
    Putaway completed,
    for article A in  AB03 storage type having GR date 09.01.2013
    for article A in AB04 storage type having GR date 12.02.2013
    for article A in AB02 storage type having GR date 20.03.2013
    for article A in AB01 storage type having GR date 12.04.2013
    As per FIFO stock removal strategy sequence must be as follows
    1.     AB03
    2.     AB04
    3.     AB02
    4.     AB01
    Currently its going in the sequence AB01, AB02, AB03, AB04.
    Can anyone share the FIFO stock removal strategy config
    Please suggest how this can be corrected.
    SAM

    Hello,
    I suggest you to Define Storage Type Group and assign your storage types to Storage Type Group. Then, in your search sequence, you assign Storage Type Group instead of Storage Types.
    System will follow the search sequence as you mentioned.
    Regards,
    Sathish

  • Putaway Block and Stock Removal Block  en masse on Bins

    Dear Gurus
    Is there a way that we can put a Putaway block and Stock removal block on more than one Bin at once
    Using LS11 - Change bin selectively, allows me to choose more than one bin to change, BUT the option is not there to allow me to put a putaway block and stock removal block collectively
    Please advise
    Many thanks
    Tony

    hi,
    use LS06 and give the storage type and WH no...you can block all the bins for that storage type in one go for Stock removal and putaway.
    Regards,
    Vijay Kumar

  • How to exclude stock of a particular storage type from collective availabil

    How to exclude stock of a particular storage type from collective availability check in MDVP.

    you can set the storage location as 'Storage location stock excluded from MRP' value '1' in the field
    Sloc MRP indicator , in MRP view $ when you enter a storage location accessing the material master.
    Thsi is the only way to exclude the storage location, you have to do it per each material and also it is excluded from the MRP.
    With this option the stock is not considered in ATP.
    IF you need the storage location in the MRP, then you should consider the use of MRP Areas.
    With the MRP Areas you define which plants/storage locations belong to each MRP area and the ATP is performed for eah area with the stocks that exist in each of them.
    Please if the issue is solved set the thread  as answered and provide the points to the useful replies.
    thanks for your cooperation

  • Activity Type Master Data

    In Activity Type master data we found these options allocation cost element feild.
    1     Manual entry, manual allocation
    2     Indirect determination, indirect allocation
    3     Manual entry, indirect allocation
    4     Manual entry, no allocation
    What is its relevance? . When to select what?.
    Please give example.

    Hi,
    We are using an activity type for Direct labour. eg of how we have defined the Master Data is below:
    ATyp category - 1
    1 is selected if Activity types use plan activity quantities. If you are going to plan the quantities for Activity type thru KP26 and then the Activity cost thru KP06 before calculating the Activity price thru KSPI, select 1.
    Price indicator - 1
    Act. price indicator - 5
    Regards,

  • Calculation of difference of wages types master data and accounting cluster

    Hi, I am developing a ABAP HR report for calculating the difference of wage types master data and accounting data and in the output i need to display the fields like
    • Officer in-charge of payroll accounting
    • Officer in-charge of Support
    • Officer in-charge of time recording
    also from where I could get the accounting cluster data for the wage types
    I want to know from where I can get these fields and how ther are related with wage types.

    Check through PA30,there are different infotypes by which these data are maintained in the Employee Master.

  • Difference of wages types master data and accounting cluster data

    Hi, I am developing a ABAP HR report for calculating the difference of wage types master data and accounting data and in the output i need to display the fields like
    • Officer in-charge of payroll accounting
    • Officer in-charge of Support
    • Officer in-charge of time recording
    I want to know from where I can get these fields and how ther are related with wage types.

    Hi Luo
    As per below link
    How to... MDG-M: Use the Data Import Framework | SCN
    The IDoc doesn't support flex entities, as they don't write into active area. Therefore, the DIF can only be used to load reuse entities in staging or active area.

  • Equipement type master data load data source?

    Hi,
    How to check whether there is any SAP delivered data source for Equipement type master data load?
    if that data source is not available then how to proceed?

    There is Master Data Texts for Equipment Type in the standard content. The standard content DataSource is 0EQUITYPE_TEXT and it extracts data from the T370K_T table in R3/ECC.
    No Master Data Attributes exist for Equipment Type on the T370K table in R3/ECC.

  • WM -Storage bin 3000711133 ( nothing but TO no)  blocked for stock removal

    Dear Friends,
    1.User has created TO for 2 qty.
    2.While confirming it , he has put 1 qty in qty diff - could be by mistake,
    3.Now this one qty is went to stock differnece - Storage type 999 and the storage bin as "TO" number.
    4.I suggested them to clear the differnces through LI21 , but they dont want to do it , as it will heat financial accounts too.
    5.They want to transfer this one qty from 999 storage type to the required storage type
    6.I tried with LT01 - user mvt type 999 , & also 201 , and used souce storage type as 999 and storage bin as TO no, but i am getting message -Storage bin 3000711133 ( this is nothing but TO no)  blocked for stock removals
    7.even i tried with LT09 - but it dosent work...
    It should allow to move the material from 999 through lt01 , in our case it is not allowing, could you please help me to resolve this issue, if i need to do some customisation changes then where i have to do?
    Thanks & Appreciates your earlier response.

    Hello Om,
    I request few corrections for my last post.
    As understood now, you picked quantity was 2 pcs , while confirming user has mistakenly put 1 pc in qty difference field.
    Here when user has entered 1 (reduced quantity that the delivery quantity in outbound delivery) then he has to enter difference indicator for reduced quantity which must have been configured in the system.
    Now say that you have deliver the 1 pc which was confimred in TO to customer, at the same time your delivery must ahve been updated with pick and pack quantity as 1.
    But still 1 qty lies in interim storage type (XXX) with stoareg bin as trsnfer order number.
    Now to put this stock back in original stoarge type and bin.
    You please try LT01 with movement type as 999 which is warehouse supervision.
    Now in next screen you enter the stoare type (XXX) and stoareg bin i.e. your transfer order number in source data
    and destination storage type and bin will be automatically picked.
    Now Press Enter . 'You will get warning message as check you entries' ignore that message and save
    Hope this will help you. Also if you are getting any erro message with above please give us the detailed escription of erro message
    Br,
    Tushar

  • Error during Stock movement between two storage type

    Dear Friends
    How do i move the stock from one storage type to other storage type within a warehouse?
    In the material master i have maintained a storage type indicator for automatic storage type determination.
    now when i create a TO for moving the stock from the orginal loaction to other location (NOT INTERIM) i am getting an error
    Error occurred during storage section search (1740 003)
    Message no. L3041
    Diagnosis
    No storage area search has been defined for this material and this storage type.
    Please assist
    Thanks

    Dear,
           Kindly specify the storage section indicator in Material Master - WM view.
    Regards,
    Sandip

  • Stock transfer from 998 storage type to Physical bins

    Dear Experts,
    As part of data conversion,After loading huge stock into SAP 998 st type into INITIAL bin,I want to move the stock into physical bins.I have SU management activated.
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    4) I want to print the storage units simultaneously during this process. How can I do this?
    I really appreciate your help.
    Thanks

    Answering your questions:
    1)During the initial upload to 998 , I have taken Material slip field as storage bin coordinate in the external system, How would I move the stock into respective bins in SAP?
    Use this info to load the stock into the correct storage bin
    2) How would I map SAP bins with stock locations (counter part for storage bins in external system) ? So that I want to make sure , stock will be placed into the right bins.
    Don't really understand what your doubt is, but if your MM/WM setup is correct, this should go OK
    3)What will be my approach for moving the stock into physical bins? Can it be through LSMW - LT01 with 999 movement type? Or is there any other method i can use?
    LSMW, with 'Standard batch/Direct Input' Object 0220 and Method 0000 (should be assigned to program RLBEST00).
    4)Is there any tamplete to use for the above process? Do I need to develop any conversion program?
    Based on previous answer, no!
    4) I want to print the storage units simultaneously during this process. How can I do this?
    Just assign the correct print code to the 561 movement type...but beware for the fact that a lot of labels will be generated at the same time and you can stuck your printer :s

  • Upload stock for material in storage type ??

    hii
    How to increase stock for particular material in LS26??
    Stock for ware house and storage type ??
    Thanks

    Hi,
    you need to create some stock in the bin for whatever the operation you are doing. Here are the steps.
    first check if you have stock of same material in any of the other bins using LS24. If so, create TO using LT01 (mov type 999) for source and destination bin (bin of your interest) and confirm the TO. Do your operation, it should work.
    If its a test system, you can try upload stock in IM using MIGO-501 mov type or MB1B-561 mov type. Crate TO for material document using LT06 (TO may get automatically generated based on your system settings). Confirm the TO (note the destination bin). If the destination bin is not same as the bin of your interest, use first option to transfer stock to bin of your interest.
    Thanks,
    Ram

  • ABC indicator in PM equipment master data

    Hi expert,
    Can anyone explain about ABC indicator functionality in PM equipment master data
    Thanks
    Rgds,

    Hi Michael,
    As per Application help, ABC indicator signifies:
    An indicator that is assigned by the procedure of ABC analysis.
    The following ABC indicators are possible:
    A - Important
    B - Less important
    C - Relatively unimportant
    According to these criteria, "A" materials are those materials that are of greatest importance for the production operations of a company.
    Examples of use for ABC indicators are vendor master records, material master records, and master records of technical objects.
    You can customize the values in ABC indicator as per your requirement.
    Saurabh.

  • What is the use of factoring indicator in Business partners master data

    Hi All,
            I am the biginner to SAP B1.please help me.I am creating the businee partners master data in that general tab factioring indicatior is there.what is need for that?

    Hi,
    Please refer to Note No.  [593657|https://websmp130.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=593657]
    Symptom
    What is the factoring indicator?
    Other terms
    factoring indicator, factoring, indicator, business partner, master
    data,
    Reason and Prerequisites
    Solution
    Factoring indicator
    The factoring indicator is used in Reporting => Accounting Reports => General Ledger.
    If a factoring indicator has been defined for a Business Partner, it
    will be entered automatically into each Journal Entry that will be
    posted for this BP.
    In Reporting => Accounting Reports => General Ledger, you can
    click on the "Expanded" pushbutton, check the "Indicator" button, select "From" and "To" and the system will only display the transactions which include the selected indicator.
    This field is for the so-called subrogation, which means
    demands to BPs are sold to the bank.
    Through this field you can allocate an assignment code to
    a Business Partner, this code can be used in an accounting reports.
    This functionality is only intended for Austria.
    Also, following information from the Online Help (F1)
    Factoring Indicator
    Assign a factoring indicator for the business partner. Note that both code and name are displayed.
    This indicator is automatically inserted as default value in the invoice. The factoring indicator may be displayed in the account statements.
    Choose  to open a Choose From List window displaying the indicators that have been defined. Choose New to define new ones.
    The indicator is only displayed after activating the field Indicator in Personal Settings.
    Regards,
    Jitin
    SAP Business One Forum Team

Maybe you are looking for