Blocked Incoming Calls & Hotmail Issue
First of all, I would like to thank JCG02 for answering my questions; this is my first time to use Iphone and use this communities. Acturally JCG02 was completely right, I should mark it as correct; I thought helpful was more accurate because the answer helped me....thank you very much.
Right now I got some other questions:
1. I found I got two missed blocked phone; but I did not block any incoming call, how did it happened and how I could remove the blocking function?
2. I would like to check my emails on my phone, I had two email addresses in the phone, how I manage them, so far, I could not read any emails on my phone yet and how to check different mail box if you have more than two email addresses?
Thank you very much
it just means someone has decided not to show his/her number when calling you. not much you can do about it. someone has done the same to me..although the number isn't blocked--they just don't say anything (started when I got my new number). contacted ATT and they said they can't block specific numbers so all you can do is answer it or ignore it really. hope an iphone update in the future will allow you to block certain numbers.
Similar Messages
-
Blocking incoming calls that are not in my phone b...
i recently tried blocking incoming calls that are not in my phone book and the result was that my pin code has been blocked. does any one have an idea of how i should go about it?
ObriaThat depends which phone he/she is using... this is in the phones section, not the smartphones, so I had assumed that software such as that would not be appropriate lol
Nokia History: 3110, 5110, 7110, 7110, 3510i, 6210, 6310i, 5210, 6100, 6610, 7250, 7250i, 6650, 6230, 6230i, 6260, N70, N70, 5300, N95, N95, E71, E72
Android History: HTC Desire, SE Xperia Arc, HTC Sensation, Sensation XE, One X+, Google Nexus 5 -
how to block incoming calls on iphone
They really need an App .. native or not to block calls. I have tried with my provider and they offer a blocking service .. but only if the caller is advertising thier number. Therfore I can not block unknown or blocked numbers from calling me! These are the ones I really need to block... My wifes phone is one digit off mine .. last night at 3:30am we get called by a blocked number at the same time and of course .. no one on the other end... robocallers should be illegal.
If your in Canada I would suggest filing a complaint to the CRTC on the abuse of unknown/blocked numbers and our inability to block or even report them. I can only file a report if I have a phone number displayed I sent in my complaint this morning to them after finding out Rogers had no way for me to prevent these phone calls. -
Good Afternon. Would someone please explain the 10 phone number limit for blocking incoming calls? I have used Vonage [which has no limit] Optimum on line [100 limit] Time Warner [30 limit and it cleared the list every 90 days] Fios only offers me 10 ? Are you aware of the problem with telemarketers? I don't think so. I'd like Fios to be more proactive in allowing me to defend the peace and quiet of my home, by expanding this area. It's quite pitiful compared to other vendors I have used, and it is the Main reason that I am not renewing my contract with Fios when we are done. Thank you.
*60 (Call Block) is the easiest way to block an incoming caller, however to my understanding only local, landline numbers can be blocked with *60. To use it, simply dial *60 and follow the prompts. But call Verizon first to set up a monthly subscription or you will be charged per use charges which can really add up.
A really great option which I have on my landline phone is called Do Not Disturb. You can make a list of up to 15 phone numbers which are the only people who can get through to you when you have DND turned on. (You can turn it on and off anytime you want through an 800 number.) NO other calls, including telemarketers, "unavailable" numbers, etc. can get through. If you have home voice mail you can choose to send the blocked calls to your voice mail so they can leave a message. Otherwise they will get a recording saying "The party you are calling does not wish to be disturbed at this time." There are also two other rejection messages you can choose.
Also you can choose a 4 digit pin to give to people you want to be able to get through but I have never used that option; I just put them on the "allowed numbers" list. -
How to block incoming call on iphone
how to block incoming call on iphone
Contact your carrier & see if they offer call blocking...some do, some don't. There is no other way to block calls on any cell phone.
-
Recently my wives incoming calls have come up as blocked calls. I can still answer the call no problem. No other phone numbers are coming up as blocked and her number doesn't come up as blocked to anyone else. Anyone know how to fix this?
The callers who are calling the iPhone probably have their numbers blocked so that they do not show on caller ID. I'm not sure if there is anything you can do.
-
I couldn't receive incoming call voice. Just could receive incoming call voice with ear speaker, headphone or built-in speaker.
Huh? What exactly is your issue?
-
Hi, I recieved new Iphone 3gs 32mb but having issue in recieving calls. I set the ringtone to any of the ones availble but on recieving a call the screen dispalys " Blocke call" and no ring tone is heard only vibrate is activated. Testing the ring is Ok. Anyone have the same issue.
make sure your silence switch is not turned on... also turn the ringer volume up (while on the springboard just tap the volume up key)
be well -
Silent switch blocks incoming call when toggled
Hi,
Just got a call in a restaurant, phone rang with all bells and whistles and then quickly set the switch to SILENT on my iphone 6. That call got dropped/blocked whilst it was ringing. So i thought i was called and coincidentally the other end put down the phone. Later on it happened again, so my suspicion was raised there might be something going on with IOS 8.3.
Can someone try this as well? Let someone ring you, and while your phone is ringing. Toggle the SILENT/mute button to ON.It sounds like you bogged the system down a bit, and saw some "lag." How many cards did you have open and with each doing what (ie, were any of the sites you were at large pages, lots of graphics, lots of javascript embedded, etc, etc)
Can you re-produce this and if so, what are the exact circumstances?
Thanks. -
Is there an app to block incoming calls?
like a black list app? Thanks!
No, there is not. You can create a silent ringtone and assign it to numbers you don't want to receive.
-
Need help Creating a translation pattern that adds dial out digits to incoming calls
I came across an article yesterday and it showed the steps how to fix Missed Call/Received Call numbers so that you can dial them from the menu correctly (auto-add a 9, etc.)?
I tried it this morning and came up with this translation pattern:
voice translation-rule 6
rule 1 /^201\(.*\)/ /8\1/
rule 2 /\(..........\)/ /81\1/
voice translation-profile filter_Incoming
translate calling 6
This translation pattern rule 1 adds the dial out character 8 and strips 201 for local calls. Rule 2 adds dial out character 8 and adds 1 for long distance. The purpose of this translation rule is when the ephone receives the phone call the characters 8 and 1 are added so when you quickly need to redial you do not have to edit the number and add 8 for each call.
I tested the translation-rule:
ROUTER-2911#test voice translation-rule 6 9082121231
Matched with rule 2
Original number: 9082121231 Translated number: 819082121231
Original number type: none Translated number type: none
Original number plan: none Translated number plan: none
ROUTER-2911#test voice translation-rule 6 2019121231
Matched with rule 1
Original number: 2019121231 Translated number: 89121231
Original number type: none Translated number type: none
Original number plan: none Translated number plan: none
ROUTER-2911#
Issue is I am not sure with my inbound call leg if it can even work. We dial out through the SIP Trunk and the incoming is translated to the AutoAttendant on Cisco Unity Express.
voice translation-rule 1
rule 1 /2015552100/ /2003/
voice translation-profile CUE_Voicemail/AutoAttendant
translate called 1
dial-peer voice 9 voip
description **Incoming Call from SIP Trunk**
translation-profile incoming CUE_Voicemail/AutoAttendant
call-block translation-profile incoming BLOCKED-INCOMING
call-block disconnect-cause incoming call-reject
session protocol sipv2
session target dns:nd01-04.fs.SIPPROVIDER.net
incoming called-number .%
voice-class codec 1
voice-class sip dtmf-relay force rtp-nte
dtmf-relay rtp-nte
no vad
Can what I am trying to do be done with my current setup?Hi patldmart012,
The dial-peer 9 that you have attached will not be affected by following config
voice translation-rule 6
rule 1 /^201\(.*\)/ /8\1/
rule 2 /\(..........\)/ /81\1/
voice translation-profile filter_Incoming
translate calling 6
Because you have not applied the translation profile "filter_incoming" on the dial-peer.
Could you please provide the exact call flow?
Along with that, If you are facing issue with calls on SIP Trunk, please collect following debugs in a logging buffer and attach the file. I will analyse it and will get back to you.
debug voip ccapi inout
debug ccsip message
debug voice translation
Debug h225 asn1 (If H323 involved)
Debug h245 asn1 (If H323 involved)
Debug MGCP Packets (If MGCP involved)
Also provide the running config of the GW.
These are verbose debugs, so please collect them in the following manner:
Router(config)# service sequence
Router(config)# service timestamps debug datetime msec
Router(config)# logging buffered 30000000 7
Router(config)# no logging con
Router(config)# no logging mon
Router# Clear log
Router# term no mon
<Enable debugs, then wait for issue to occur.>
Router# term len 0
<Enable session capture to txt file in terminal program.>
Router# Undebug all
Router# sh log
Once i have the logs, i will analyse it and will get back to you.
Regards,
Mudit Mathur -
Blocking skype calls from certain parts of the wor...
Hi, i was wondering if it's possible to configure my router or something to block incoming calls from people in the US calling me in europe while still being able to call people from europe to europe?
Hello,
That's not possible - nor necessary. Just adjust your "privacy" parameters
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
I have already blocked the *67 (999-999-9999 calls on the line and they still continue to come thru. I s there a way to actually block these or not. I even paid the $4.99 fee for usage controls and they still came thru. Is there a way to transfer these calls to another line?
Pammeysue, with Usage Controls, you do have the ability to block incoming calls from numbers listed as private, restricted, or unavailable. If you are still receiving private, restricted, or unavailable calls, I recommend to remove the settings and add them back and save. Then try again.
Click this link for additional information: http://support.vzw.com/faqs/Features%20and%20Optional%20Services/usage_controls.html
Additionally, some devices are restricted to have this feature such as the Kin and 4G devices (Thunderbolt).
Thank you, -
Block incoming numbers (phone
This is the 21st Century and the iPhone is 1,000,000 times more powerful than computers of 40 years ago.
WHY can I not block incoming calls, ignore them etc? WHY can I not block incoming spam text messages?
I can do this on email and other services. The hardware of the iPhone is totally capable of keeping and obeying a Black List of numbers I enter.
Is there a Reason that Apple refuse to give us this feature? Are they intent on forcing us to accept spam? This makes Apple look really bad.
Are there ANY 3rd party Apps (or Hacks even!) which can do this?
email me if you can't post answers hereEven if you employ a blacklist, the phone would still ring/vibrate once and you'd still have the numbers in your recent calls list. Blacklisting on the device itself just uses the caller id information to check against the blacklist before dropping the call, so it has to allow the call to initially connect to get the caller id information.
The only way to get a call to not even connect at all is for the carrier to block it at their switches. AT&T offers this in the USA, for a fee (their parental controls package), and I'm sure any carrier could offer it through a web interface on your account web page, but none seem to be willing to set it up or incur the expense to support it.
You can globally disable not only the ring sound, but also vibrate, but then you will never know when you get a call at all (I have my ring/silent switch set up like that for meetings, so I am not interrupted at all). The silent ring tone idea (just google for one, there are several hits to download from) in a contact list of those numbers you don't want to answer works too.
If you want the option to dump those numbers directly to voice mail, you can suggest it to Apple - http://www.apple.com/feedback/ and maybe they'll include it in a future iOS release. -
I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...
Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?
Maybe you are looking for
-
I'm currently testing a Flex mobile application (that was originally made for iPad 2) on high rest iPad fourth generation and iPad Air devices. I'm having this strange issue where the s:DataGrid, no matter where I use it in the application, will disp
-
How do I get lesson 1 to open lesson 2 which is in a parallel folder?
My project has 9 lessons. Each lesson must be published as a separate folder because of the client's LMS enviornment. Navigation must be forced. To begin lesson 2, the user must complete lesson 1. I am using a Continue button which opens a file i
-
Iphoto won't display photos or run a slideshow - just a black screen. Can't see photos to edit etc. Thumbnails all OK and all else seems visible in the usual way etc. Tried rebuilding library and reset Mac Air but no result. Ideas please!!!!
-
I am using AOL and my refresh is on the far left I do not see a small circle with a line through it
Sagebrush - I am using AOL and my refresh is on the far left side of my adress box and I do not have a small circle with a line through it. I am computer dumb so bear with me.please. Message was edited by: Nana Noland Mike - I am using Windows 7 a
-
Is there a way to add an incrementing number (like a PO number) in the header section of the form? The number would be automatically generated when a form is requested and people filling out the form would not be able to edit the number?