Blocked Inkjet
My printer is a DeskJet 720C, and my colour cartridge, HP1823, an unused original, which has been in storage for a while, and is now out of warranty, has it's Magenta inkjet blocked completely. The Yellow and Cyan jets were also blocked when I first tried it, but they soon flowed and printed as normal after a few minutes in a bath of hot water plus rubbing alcohol.
Would a blast of air help? I could take the cartridge with me next time one of my tyres needs to be inflated! Thank you!
This question was solved.
View Solution.
Blowing air from an air compressor would likely damage the printhead. You might try putting the printhead in an inch of very hot water for a few minutes, but most likely you will just need a fresh #23 cartridge.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V
Similar Messages
-
Why blocked from printing with wireless computer ? Only pics , no email documents . I have a canon pixma mx 439 . Error message no AirPrint found ?
About PIXMA MX439
See Other PIXMA MX Series
Average Rating2.6
Read all Reviews (10) Write a Review
Wireless Inkjet Office All-In-One
Item Code: 5783B023
Estimated Retail Price: $99.99†
Overview
What's in the Box
Brochures & Manuals
Wireless Help
Features
Supplies & Accessories
Drivers & Software
Fax Help
Specifications
Service & Support
Reviews
Wireless Help
Apple AirPrint:
AirPrint allows users to wirelessly print photos, emails, web pages and other documents without the need to install device drivers, saving time and making for a seamless user experience. Both your Apple device and your PIXMA Wireless All-in-One must be connected to the same wireless network connection.
A firmware update for the printer may be needed to support AirPrint. You will need a PC (Mac or Windows), a USB cable, Firmware utility (download from our site) to perform this update.
Click on the specific topic below to get detail information.
- What is Firmware?
- Check if the AirPrint Firmware Update is Necessary
- What is Needed to Perform Firmware Update
- Firmware Update Procedure
- How to Print Using Apple AirPrint
- Delete the Additional Printer Listing
- Firmware Download
- AirPrint Video -
Data blocks in forms 6i, can not see the data
i have built an application in forms with some data blocks. the blocks a connect to some tables in the db. i have built them connectd as "system". but when i run the applicatio as user x i can do select, insert, update, delete, but i can not se the records in the datablocks (they are empty), but i can do all transactios. why?
First of all, developing from the System schema is not a good idea.
Who owns the tables your form is connecting to? The table owner should create a public synonym for each table name, and also needs to grant user x access to the table. -
hi experts,
i have created blocked ALV program.
in the o/p , it displays list of recors for open items,then list of records for cleared items.
now i want it to display sum of both open and cleared items of particular column.
in grid display it is displaying total for open and cleared items.
but in blocked alv it is not displaying total for open and closed items separately.
and also i need grand total of both.
if any body knows please tell me..Hi Sridevi
Refer this code as an example.
This code calculates the occupied column from sflight table.
TYPE-POOLS: slis.
DATA:it_fieldcat TYPE slis_t_fieldcat_alv,
is_layout TYPE slis_layout_alv,
it_events TYPE slis_t_event ,
it_sort TYPE slis_t_sortinfo_alv .
DATA: wa_fcat LIKE LINE OF it_fieldcat,
wa_sort LIKE LINE OF it_sort.
DATA: i_flight TYPE sflight_tab1.
SELECT * FROM sflight
INTO TABLE i_flight
UP TO 10 ROWS.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = 'SFLIGHT'
CHANGING
ct_fieldcat = it_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2.
wa_fcat-do_sum = 'X'.
MODIFY it_fieldcat FROM wa_fcat
TRANSPORTING do_sum WHERE fieldname = 'SEATSOCC'.
wa_sort-up = 'X'.
wa_sort-fieldname = 'CARRID'.
wa_sort-subtot = 'X'.
APPEND wa_sort TO it_sort.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
i_callback_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = is_layout
it_fieldcat = it_fieldcat
i_tabname = 'I_FLIGHT'
it_events = it_events
it_sort = it_sort
* I_TEXT = ' '
TABLES
t_outtab = i_flight
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
is_layout = is_layout
it_fieldcat = it_fieldcat
i_tabname = 'I_FLGIHT'
it_events = it_events
it_sort = it_sort
* I_TEXT = ' '
TABLES
t_outtab = i_flight
EXCEPTIONS
program_error = 1
maximum_of_appends_reached = 2
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
Thanks and Regards -
Sale Order Credit Block due to open credit memo
Dear All,
System is blocking sale order for open items(credit). And the only open item is credit memo.
Can we avoid credit note to be considered as open item?
Thanks
ArunDear Arun,
Do not think this is possible in standard.
I would suggest the following way.
Currently system is giving a message during sales order creation . right?
Ask your abaper to find an EXIT before that point.
There write a code to exclude CREDIT MEMO document types from BSEG of the customer code.
It is possible as i have worked in similar requirement.
Check and revert back.
Thanks & Regards,
Hegal K Charles -
Copied layout is not working for Sales order item assinment block
Hi Experts,
I copied the standard componet BT115IT_SLS/items view layout with custom role configuration key and worked fine.
I have added one more field to the item view with the same configuration and saved .When I opended the sales order in the WEB UI , The item assigment block is displaying with complete BTADMINI context fileds and This is the issue.
I have seen configured fields only in the personalization and I have downloaded the items assigment block data to Execl.In the Execl sheet I can able to see the configured fields (availble fileds in the configuration tab in component workbemch) data only.
But Items assignment block is displaying all the fileds (taking from the context node BTADMINI).
I have deleted existing customer configuration and again copied from the standard layout.But I got the same issue.
I have wriiten some code in the ON_NEW_FOCUS and commented the code.Still it not working.
Please help me , where I have done the mistake and provide me some inputs.
Thanks,
VenkkyHi Experts,
Solved isuues myself.
The problem is inconsistency of BTAdminI context node . I have deleted the view enhancement and again enhanced the view .I copied the layout with customer role key and dispalyed expected layout.
Thanks,
Venkky -
Report generation for Delivery Blocked Orders
Hi All,
I am trying to pull up a report which should contain only orders with the Delivery Block.
Through VL06O i can get the orders which need to PGIed, which are open, which are stuck in workflow and which have got delivery block.
So is it possible to separate the delivery blocked orders (from an end user point of view) from the other orders. I tried to have a look at the filters which i could put on the VL06O-> Outbound Deliv. for PGI, but couldn't find it.
can any one help in thi regard.
Thank you in advance.Hi,
Try report V.02 - Incomplete Orders -
SQL Timeouts and Blocking Locks
SQL Timeouts and Blocking Locks
Just wanted to check in and see if anyone here has feedback on application settings, ColdFusion settings, JBOSS settings or other settings that could help to limit or remove SQL Timeouts and blocking locks on SID's.
We're using MS SQL 2000 with JBOSS and IIS5.
We've been seeing the following error in our logs that starts blocking locks in SQL:
java.sql.SQLException: [newScale] [SQLServer JDBC Drive] [SQLServer] Lock request time out period exceeded.
Once this happens, we're hosed until we remove the blocking SID in SQL. These are the connections to the application.
Any feedback would be great. Thanks!Hi
This is your exact solution:
Select a.username, a.sid, a.serial#, b.id1, c.sql_text
From v$session a, v$lock b, v$sqltext c
Where b.id1 in( Select distinct e.id1
from v$session d , v$lock e
where d.lockwait = e.kaddr ) and
a.sid = b.sid and
c.hash_value = a.sql_hash_value and
b.request =0;
Thanks
Sarju
Oracle DBA
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by I'm clueless:
Can someone give me the SQL statement to
show if there are any blocking database locks and if so - which user is locking the Database?
Thanks in Advance<HR></BLOCKQUOTE>
null -
How do I replace someone else's Mac ID with my own?
Bought iPhone second hand on TradeMe.
Previous owner re-set the phone but his ICloud account stayed on now my phone. He uses his AppleID on his new iPhone now and, understandably, does not want to give me his password. Any ideas?? Please.
This issue is blocking my access to iTunes and any other file from my home computer. It keeps on telling me that I have to autorise my computer to pass on files, yet, it seems, for all this to happen, I need to get logged in through the phone's Apple ID. This of course is different to my one on my computer - and I have no password for it.
This phone is not stolen!! I payed still a fair bit for it. Am still in contact with the previous owner. He doesn't know how to fix the problem either.
Would appreciate any suggestion ????
Thanks
SamSingsSettings>general>resets>erase all content and settings.
That will put it back to its out of the box state. Set it up with your own apple Id. -
How to block on account payment for certain user
Dear All,
We are looking to implement a policy on how to block certain users not to be able to take on account payment. One more query is it possible to disable a field. I want to disable the field "Payment on account" in the Incoming Payments. Please adviceHi,
Sue below code in transaction notification procedure,Change userid =1 to user id for user ou want to block payment on account
IF @Object_type = N'24' and @transaction_type = N'A'
BEGIN
if exists (SELECT ORCT.DocEntry from ORCT
WHERE (ORCT.PayNoDoc='Y' and ORCT.UserSign=1) and ORCT.DocEntry = @list_of_cols_val_tab_del
begin
select @error =14
select @error_message = 'Cannot make on account payments '
end
END
Thanks,
Neetu -
How can I block an e-mail address from sending me spam on my iPhone 5s? My ISP is unable to help. I can block on my laptop via Outlook, but they still come through on my iPhone 5s. Thank you very much.
You can "Move to Junk" and it should start doing it automatically after a few times:
http://blog.mailup.com/2013/09/mail-app-in-ios-7-our-first-tests/ -
I have a game but it only for one apple id and one divece but someone i dont know id play that game and using my apple id and i want to know if u can block them from using ur apple id and also erase all the games they downlode with the apple id
There probably is, but it requires that you be able to use punctuation and write in sentences so that we can understand exactly what you want.
You can block others from using your Apple ID by changing your password. There is no way to erase what was already downloaded on to someone else's device, for obvious reasons, -
How to check a material being blocked by system at current time?
hi,
is there a method to to check a material being blocked by system at current time?
Thanks!Call the function module ENQUEUE_EMMARAE with the required material number. If sy-subrc is not 0, after the function module has executed completely then the material is locked by a different user.
Please mark points if the solution was useful.
Regards,
Manoj -
The BIG WHITE MOSTLY BLANK , MOZILLA START PAGE was blocking my use of PRINT PREVIEW, from the orange "Firefox" in the upper left corner.
I was told i was using an out of date version of Firefox.
But no "click here to update".
So i downloaded the new edition of Firefox.
And still, i can not see PRINT PREVIEW, because the large white screen of the MOZILLA START PAGE is blocking it.
I have selected a background wallpaper, so would rather not see ANY of the BIG WHITE START PAGE, at all !!
HEEEELP,,,,,,Hi,
Can you please post a [https://en.wikipedia.org/wiki/Screenshot screenshot] of the start page when it is blocking the print preview. Please note that you may have to change to the tab of the site to be printed to see the print preview of the page. If the problem persists, please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode.]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
[http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
[http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars] -
Exception on JaxRpc invoke trailing block elements must have an idattribute
hi all ,
I am calling a target system from a bpel process .
but while invoking i am getting the below error .
""*exception on JaxRpc invoke: trailing block elements must have an id attribute*""
my schema file is as below ,
can any one let us know the reason behind the issue .
-----------------------------------xsd file----------------------------------------
<?xml version="1.0" encoding="windows-1252" ?>
<xsd:schema elementFormDefault="qualified"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:tns="http://www.viva.com.bh/vivaportal"
targetNamespace="http://www.viva.com.bh/vivaportal"
xmlns="http://www.viva.com.bh/vivaportal">
<xsd:complexType name="error">
<xsd:sequence>
<xsd:element name="errorCode" type="xsd:int" minOccurs="0"/>
<xsd:element name="errorDescription" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="preRegistrationCheck"/>
<xsd:complexType name="preRegistrationCheckRequestType" xmlns:tns="http://www.viva.com.bh/vivaportal" >
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0" />
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0" />
<xsd:element name="source" type="xsd:string" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="preRegistrationCheckResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0" />
<xsd:element name="PIN" type="xsd:int" minOccurs="0" />
<xsd:element name="error" type="tns:error" minOccurs="0" />
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="prePasswordResetCheck"/>
<xsd:complexType name="prePasswordResetCheckRequestType">
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0"/>
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0"/>
<xsd:element name="source" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="prePasswordResetCheckResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0"/>
<xsd:element name="PIN" type="xsd:int" minOccurs="0" />
<xsd:element name="error" type="tns:error" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="registerUser"/>
<xsd:complexType name="registerUserRequestType">
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0"/>
<xsd:element name="password" type="xsd:string" minOccurs="0"/>
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0"/>
<xsd:element name="source" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="registerUserResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0"/>
<xsd:element name="error" type="tns:error" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="authenticateUser"/>
<xsd:complexType name="authenticateUserRequestType">
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0"/>
<xsd:element name="password" type="xsd:string" minOccurs="0"/>
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0"/>
<xsd:element name="source" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="authenticateUserResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0" />
<xsd:element name="error" type="tns:error" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="resetPassword"/>
<xsd:complexType name="resetPasswordRequestType">
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0"/>
<xsd:element name="operation" type="xsd:string" minOccurs="0"/>
<xsd:element name="oldpassword" type="xsd:string" minOccurs="0"/>
<xsd:element name="password" type="xsd:string" minOccurs="0"/>
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0"/>
<xsd:element name="source" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="resetPasswordResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0"/>
<xsd:element name="error" type="tns:error" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="deleteUser"/>
<xsd:complexType name="deleteUserRequestType">
<xsd:sequence>
<xsd:element name="MSISDN" type="xsd:int" minOccurs="0"/>
<xsd:element name="timestamp" type="xsd:dateTime" minOccurs="0"/>
<xsd:element name="source" type="xsd:string" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name="deleteUserResponseType">
<xsd:sequence>
<xsd:element name="resultCode" type="xsd:int" minOccurs="0"/>
<xsd:element name="error" type="tns:error" minOccurs="0"/>
</xsd:sequence>
</xsd:complexType>
<xsd:element name="preRegistrationCheck" xmlns:tns="http://www.viva.com.bh/vivaportal"
type="tns:preRegistrationCheckRequestType"/>
<xsd:element name="preRegistrationCheckResponse"
type="tns:preRegistrationCheckResponseType"/>
<xsd:element name="prePasswordResetCheck"
type="tns:prePasswordResetCheckRequestType"/>
<xsd:element name="prePasswordResetCheckResponse"
type="tns:prePasswordResetCheckResponseType"/>
<xsd:element name="registerUser" type="tns:registerUserRequestType"/>
<xsd:element name="registerUserResponse"
type="tns:registerUserResponseType"/>
<xsd:element name="authenticateUser" type="tns:authenticateUserRequestType"/>
<xsd:element name="authenticateUserResponse"
type="tns:authenticateUserResponseType"/>
<xsd:element name="resetPassword" type="tns:resetPasswordRequestType"/>
<xsd:element name="resetPasswordResponse"
type="tns:resetPasswordResponseType"/>
<xsd:element name="deleteUser" type="tns:deleteUserRequestType"/>
<xsd:element name="deleteUserResponse" type="tns:deleteUserResponseType"/>
</xsd:schema>
-----------------------------------------------end-------------------------------------------Anybody has solution on this? I too getting similar exception when Callingl a web service with soapenc:arrayType from BPEL
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: trailing block elements must have an id attribute</summary>
</part></bindingFault>
This is what the documentation says. Any body has steps or examples
4.13.4 SOAP-Encoded Arrays Not Supported
Oracle BPEL Process Manager does not support SOAP-encoded arrays (soapenc:arrayType).
Use the following workarounds:
· Call a service with soapenc:arrayType from BPEL, but construct the XML message more manually in the BPEL code. This enables you to avoid changing or wrapping the service. However, each time you want to call that service from BPEL, you must take extra steps.
Thanks
N Reddy
Maybe you are looking for
-
Applescript - how can I count the number of records in a Word data source?
I have written a script in AppleScript to open Word and then perform a mail merge from a data source and everything is working fine. One thing I want to do but am struggling with is to return the number of records in the mail merge. I am trying thing
-
How do I make Quicktime Pro my preferred playback software?
I use VLC Player and Quicktime Pro. Recently, however, I've needed to use Quicktime for streaming purposes - but VLC comes on almost immediately. How can I make Quicktime my default or preferred player?
-
BAPI or Function Module to Update Vendor Details
Hi Friends, I need to update Vendor Details (Street) in my program using a BAPI or Function Module. Is there such thing available which can do my job? Regards, Raju...
-
NI 488.2 Install in Ubuntu 13.04
Are there any plans on supporting Debian based installations? I want to use Ubuntu and Raspberrypi for my instrument control and automation.
-
What's with this message?
There are four of use who us the iMac we have at home. All four of us have iPods that we will connect to the computer using our own individual account. I often get the following message and I'm wondering why? Example: Yesterday I hooked up my iPod to