Blocked no current digital signiture

I have been using Firefox for years and about a week ago it just quit working. I uninstalled and tried to reinstall from the website, when attempting to download I got an error message that said this download is blocked because it does not have a current digital signature. I was able to download anyway however I can not open firefox when I click on the shortcut. When I uninstalled I moved all the files not uninstalled to another folder so the new install would generate all new files. Still no success. I would appreciate your help.

What is the exact wording of the error message?
Are you getting the message when trying to install iTunes?
Se if this helps:
https://discussions.apple.com/message/6399949#6399949
Also try posting in the iTunes forum if it is an iTunes problem.

Similar Messages

"Damaged" and now can't reinstall Air.... with "broken digital signiture"?

When I restart, a window pops up and say my Air is "damaged" and I must uninstall and reinstall the program.
(Maybe it had something to do with my having done systerm restore, but not sure).
I uninstalled but cannot reinstall it now. I can downlaod the file, but When I click the "run", it just disappear and it is not installed.
I ran AVG in case my computer was infected. There is no infection, but it says the Air file which I downloaded
had "broken digital signiture". What does it mean? And why I cannot download Air ?
By the way, there are many websites I cannot go, as basic as Facebook, and very slow and layout is odd.
Is this because my not having Air?

A digital signature works by storing a numeric representation of a file or set of files called a hash. If the files are changed, the hash also changes. If your digital signature is "broken" then this could mean that the file has changed since it was signed or it could mean that you computer, in the bad state that it seems to be in, can't compute the hash correctly. I assume you have rebooted at least once.
Microsoft has an install cleanup tool, http://support.microsoft.com/kb/290301, that sometimes helps in situations like this.
And no, the presence or absence of AIR on your system has no affect on any websites.

Digital Signiture in Purchase Orders

Dear all,
I was asked to prepare the technical infrastructure in order for end users (purchasing/procurement department) to assign digital signitures in Purchase Orders produced by SAP.
Do you know where do I have to look first in order to get appropriate information (i.e. configuration guide, etc.)?
Thanks,
Filippos

Hello,
Please try below link:
http://help.sap.com/saphelp_nw70/helpdata/en/67/9444943f1148f58df11fef1463cf4f/content.htm
Hope it helps you!
Regards,
Geetha

Digital signiture

Hello i have recently got a new white 32 gb ipod touch and i have download itunes so i am able to download songs but my laptop says there is no digital signiture please help

What is the exact wording of the error message?
Are you getting the message when trying to install iTunes?
Se if this helps:
https://discussions.apple.com/message/6399949#6399949
Also try posting in the iTunes forum if it is an iTunes problem.

HT1926 cant download itunes. message says digital signiture not valid. windows 7 system

i can not download itunes to this system. keep getting a message that the digital signiture is invalid for apple. any ideas?

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

Satelite A500-ST5606 Digital Signiture Errors after restoring from the Recovery Disks.

I had to replace my hard drive, I reinstalled Windows 7 Home Premium (64bit) from my recovery disks. I get a digital signiture error the following drivers:
Display Adapters
IDE ATA/ATAPI controllers
Network Adapters
Sound drivers.
Also unable to update windows using windows update, I get service is not running with it.
Please advice.
Thanks

Satellite A500-ST5606
A known problem. See my message about that.
After Restoring to New Hard Disk, No Windows Update
You may need to repeat the restore and then immediately install the new storage driver.
-Jerry

PDF Fillin Forms with Digital Signitures - Roaming, LDAP

Hello, my organization is trying to be more "Green" by taking regular PDF documents that use to be printed, filled in by hand, signed and then routed... To a PDF fill-in form that contains a Digital Signature Block. I can easily and successfully create PDF fill-in forms, where Im running into an issue is with the Digital Signatures.
I can easily create a Digital Signature that is stored on my local computer and sign documents then forward them via email on to the recipient. However, what we would like and have been failing and making happen is to set up a signing server where the signer can fill out the PDF form and then sign the document by pulling their digital signature from a Directory Server, in our case LDAP or Active Directory.
From the information that I have found on the web I know this can be done without use of expensive third party applications. However, I have not found information on how to do this other then this simple 3 line instruction which did not work for us. - http://help.adobe.com/en_US/Acrobat/8.0w/Professional/help.html?content=WS58a04a822e3e501 02bd615109794195ff-7d96.html
Any help on this topic would be greatly appreciated.

I'm trying to find a reasonable way to do pdf forms that can be emailed to our patients to fill out and return (submit) to us. Can you help? Of course, my patients are not going to have special software to enable them to fill out the pdf form. I need to be able to do everything to make it work from my end. I hope you can help.
Peggy
[email protected]

Block Pages in digital publishing

hello,
I wanted to know if it is possible to lock the pages of an application of digital publishing in such a way that the transition from one page to another occurs only with buttons and not through the horizontal scroll.
thanks
Paolo

Sorry for the delay.
In such scenario you have to provide a dummy MSO with 2 empty states for every page. You can use master pages to make your work faster. For every MSO you set a slideshow with "swipe to change image" checked. This will prevent from swiping to next or previous article.
In the article properties leave the "horizontal scroll only" option unchecked, to allow vertical scrolling within your articles. Also set smooth scrolling to "Off (Snap to Page"). You have to provide buttons with actions "Go to URL" on every page. I would suggest using "navto://relative" format, as described here:
http://helpx.adobe.com/digital-publishing-suite/help/hyperlink-overlays.html#relative_navt o_links
All that said, I am rather skeptical of using button navigation throughout the app. Swipe is far more natural on tablets, and it doesn't constrain your other interactivity on the page as much as dummy MSO. I use this solution mainly when I want to direct my readers to some specific place in the app, or to provide them with a multiple choice, instead of letting them just continue linear reading.
Regards,
Tomek

Software update Digital signiture problem

I just purchased a brand new powermac G5 Quad 2.5ghz. after initial setup software update ran, and after it checked and found updates I recieved this error message:
"The digital signature for this package is incorrect. The package may have been tampered with or corrupted since being signed by “Apple”."
I have never seen this before, and cannot seem to fix it. I have searched these forums and tried deleting all the softwareupdate.plist files and restarting. Does anyone have a solution for this? I have a 15inch powerbook and I've never had an error doing a software update.
Thanks for the help.
-Jason

The mechanism of Software Update forms from the registration procedures upon entering license section and admin authentication received securely to install Mac OS X 10.4 or 10.4.x. Some identifiable information such as computer ID, the unique MAC address, a node information and the registered information are transmitted to an Apple server with the digital signature.
I believe this server differs from the dot mac server with the reception system that includes time zone. Presumably, grabbed your information from the dot mac for the registration results in a logic-assertion failure (perhaps unrecoverable) with the error message-- lost or corrupted the consistency of the client information as well as the packages stored in the directory. Software Update routines may no longer be able to handshake with the server. Because, Software Update server audits localizations used the license, validating some XML document, parsing a distribution script for each scheduled software to be updated.
The fundamental is a rock-solid Mac OS X Tiger multi-layed security architecture.
I cannot say for sure if the following troubleshooting can fix the problem. If you like, try removing the folder and files onto the desktop's temporary folders. Restart the computer to test the recurrence.
/Library/Caches/com.apple.SoftwareUpdate/
/Users/HOME/Library/Caches/com.apple.SoftwareUpdate/
/Users/HOME/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxxxxxxxxxxx.pl ist
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Users/HOME/Library/Preferences/com.apple.SoftwareUpdate.plist
You may want to test if this BSD command works with Terminal.
softwareupdate -l
or
softwareupdate --list
If suggestions do not work, I would do everything from scratch. Note that some invisible filesystem on the HFS Plus File System can be erased with a zeroing option.

How do I read the current digital output?

Im using LV 7.1 to control a stepper motor (direction only) using user defined set points that are measured by a linear encoder.
Basically I want to make it bounce between two set points by switching the motor direction. I can do the outer bounds fine, but to tell LV which direction it should go in between I want to just have it look at the digital output that I am sending to the motor and just continue to send that same signal. I know that it is on port 7 line 0 of my card, I just haven't figured out yet how to grab that information. Any ideas?
Thanks.

What boards are you using for this?

GPO block your current security settings do not allow this file to be downloaded

what GPO setting or Registry what stop IE from downloading files

Am 16.05.2012 14:21, schrieb rprudog:
> what GPO setting or Registry what stop IE from downloading files
gpsearch.azurewebsites.net - enter "allow file downloads zone". This can
be configured for each of the security zones IE offers. But remember:
This will NOT AFFECT other browsers that are even available as portable
editions, so you must not rely on that... unless you have SRP or
Applocker in place.
regards, Martin
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
Wenn meine Antwort hilfreich war, freue ich mich über eine Bewertung! If my answer was helpful, I'm glad about a rating!

RAC에서 Current Block과 CR Block

RAC 환경에서 시퀀스를 캐싱을 많이 할 경우 Index Leaf Block Contention 감소시켜서 속도를 증가 시킬수 있다고 들었습니다.
Row가 Insert 될 때마다 가장 큰 Key를 가진 Index Leaf Block이 값이 계속 증가하면서 바뀌므로, 이것은 RAC 환경에서 노드간 Current Block과 CR Block의 높은 전송량을 유발하며 성능 저하 현상을 일으킨다고 하는데요.
"노드간 Current Block과 CR Block의 높은 전송량을 유발" 한다는 말이 잘 이해가 안가는데 설명 부탁드립니다.

두가지에 대한 정의
cr block : Consistent Read block
하나가 업데이트 중인데 커밋이 되지 않았을 경우 읽기 일관성을 위해
누군가 select하게 되면 과거의 이미지를 만들어야 하는데 이는 언두세그먼트에가서 과거의 이미지를 찾아서 만들어야 한다. 이는 하나의 버퍼로 사용되지 않고 이 때 생성되는 버퍼블록이 cr block입니다. ( 과거와 현재의 ..버퍼 ) insert, delete는 cr block에 포함되지 않습니다. update만 해당됩니다.
current block
DML을 통해서 수정을 위해서 데이터를 읽을 때에 segment의 block을 읽을 때에 이것을 current block이라 한다. select의 경우에는 full scan 할 경우에 segment header를 읽는 것이 current block이 된다.
누군가 테스트를 한 것인데 너무 좋은 자료라 올립니다.
출처>
http://www.insight-tec.com/en/mailmagazine/vol159.html
X$BH
Last time, I viewed STATE column of X$BH in a single server and in a single session and examined the following points:
CR block is not created by SELECT or INSERT queries.
CR block is created by UPDATE queries.
There are some cases where CR block is not created by UPDATE queries, though. I will analyze these cases in this issue. DELETE queries operate almost the same as UPDATE queries.
The following is the testing environment:
(Environment)
Linux 2.4.2-2
Oracle9i EE Release 9.2.0.1.0
(Table configuration)
SQL> desc test
Name Type
ID1 NUMBER
ID2 NUMBER
TEXT VARCHAR2(2000)
*Grant INDEX (TEST_IDX) to ID1
Table contains following data.
ID1 ID2 TEXT
1 1 insight
2 2 insight
3 3 insight
I executed the following statement last time.
SQL> update test set id1 = 1 where id2 =2;
WHERE clause specifies the row ID2. As ID2 is not indexed, full scan will be performed to update.
The following query specifies ID1 in WHERE clause. As ID1 is indexed, index scan will be performed to update.
(UPDATE query)
SQL> update test set id1 = 1 where id1 =2;
*ID1 is specified in WHERE clause so that index scan
is performed.
(Status of database buffer)
SQL> select
o.object_name
,decode(state,0,'free',1,'xcur',2,'scur',3,'cr', 4,'read',5,'mrec'
,6,'irec',7,'write',8,'pi') STATE
, count(*) BLOCK
from x$bh b , dba_objects o
where b.obj = o.data_object_id
and o.object_name like 'TEST%'
group by o.object_name, state
OBJECT_NAME STATE BLOCKS
TEST xcur 2
TEST_IDX xcur 1
CR block is not created, as you see. Regarding index, there is only one block on database buffer. When I previously performed full scan under the condition where there was no data to be updated, CR block was not created.
Status of database buffer when there is no target data
to be updated at full scan.
SQL> update test set id1=3 where id2=5;
*ID2 is not indexed. There is no such data as ID2=5.
0 row updated
OBJECT_NAME STATE DBARFIL DBABLK BA
TEST xcur 1 70913 54D28000
TEST xcur 1 70914 54D20000
CR blocks are created in the following cases.
CR block is created (in a single session)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
UPDATE SELECT INSERT
Full scan Yes No --
Index scan No No --
In a single session environment, CR blocks are created only by UPDATE query at full scan. Why CR blocks are created under this condition?
CR block itself is a read consistent block, but I wonder why CR block is created in a single session environment. I assume that CR block is created to create rollback information or to satisfy lock function.
CR block is not created at index scan because it is possible to identify ROWID of target data from the index. As UPDATE process is performed by each row, CR block is not necessary.
Lastly, I will examine a mechanism of current block updating, which is quite different from the one of full scan and of index scan.
The following table indicates the changes in the buffer address of a current block at index scan.
UPDATE at index scan:
[Before UPDATE]
OBJECT_NAME STATE DBABLK BA
TEST xcur 18716 54D0E000 <-target block
TEST_IDX xcur 18724 54D04000
[After UPDATE]
OBJECT_NAME STATE DBABLK BA
TEST xcur 18716 54D0E000 <-target block
TEST_IDX xcur 18724 54D04000 *No changes
I don't see any changes in the buffer address. This means that the data in the current block is updated directly.
The following table indicates the changes in the buffer address of an XCUR block at full scan.
UPDATE at full scan:
[Before UPDATE]
OBJECT_NAME STATE DBABLK BA
TEST xcur 18717 54C3A000 <-target block
[After UPDATE]
OBJECT_NAME STATE DBABLK BA
TEST xcur 18717 551F2000 <-target block
TEST cr 18717 54C3A000 *BA is changed
|
BA of current block before being updated
I see changes in the buffer address. In addition, the current block is changed to CR block after updating. The process is performed as follows:
1. A current block (XCUR) in 54C3A000 is copied to 551F2000.
2. The current block is changed to CR block.
3. Update process is performed to XCUR.

New window blocking current webpage in IE7 & above

Hi,
I've noticed different behavior in IE6 and IE7 and later versions. We have a webpage that will open a new window (window.showmodaldialog) upon clicking submit.
In IE6, when I clicked submit and while waiting the webpage A to load, I open another webpage to read. When the webpage A finish loading, a new window will bring to background and did not block the current webpage which I was reading.
However, in IE7 and later versions, the new window will bring to foreground and block the current webpage which I was reading. I have tried all settings and modifying the registry as per advice online to force the new window to background and not to steal
the focus but to no avail.
Is it a bug or it is a new design in IE7 and later versions?
Please advice. Thanks in advance.

I have no IE6 to test it, but based on my knowledge, window.showmodaldialog will show a modal dialog which you cannot set focus on your parent window if you don't close the dialog first.
It seems that you need to create a modalless dialog, please try to use
showModelessDialog method.
This method creates a dialog which will not block the current webpage which you are reading.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Windows 8.1 Pro Shows me (Identifier) Key ID FCB##### & I have the Recovery Key File with 48 digits - It Will Not Unlock!!

And the password, I have tried unlocking the Gold Key Locked drive by right clicking on it in file explorer and also going to the control panel, In both area's I have tried the password phrase and the Recovery Key 48 digits I have in both the Cloud and on
a secondary HD, so what I am saying is I have all the information and I am still unable to unlock the drive.
Any suggestions?
The only thing I did, was when I signed back into the drive I recreated the file, but it shpould not have done a thing because I used the same password phrase.
I also so have that written down on a piece of paper, so I have it on paper, in a digital file and in the Cloud and it just will not open the drive.
I need help, I have also use the command prompt all to no avail. it gives me a "Wrong Password", there's no way because I was using the same phrase P/W and I was going in and out of the drive. It wasn't until the next day that I was unable to get
back in.
Any help, suggestion would be greatly appreciated.

Hello Encryptionist,
Do you mean that you can’t use the password and recovery key to unlock the BitLocker encrypted volume?
Have you made any changes before this issue?
Do you receive any error message when you use the password to unlock the volume?
Please double check if you have input the right password and recovery key.
Please check if you have forget that you change the password and recovery key.
Additionally, we could run the command repair-bde to repair drive.
The following example attempts to repair drive C and write the content on drive C to drive D by using the 48-digit recovery password specified. The recovery password should be typed in eight blocks of six digits with a hyphen separating each block.
repair-bde C: D: -rp 111111-222222-333333-444444-555555-666666-777777-888888
For more information, please take a look at the following article.
http://technet.microsoft.com/en-us/library/ff829851.aspx
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature?

Dear all,
I am looking to setup the use of active directory userid/password authentication instead of SAP R/3 User/Password for digital signature. We SSO to the backened ABAP AS via an SAP NW Portal to which SPNEgo kerberos authentication is setup. Today we specify R3 user id/password to digitally approvae a lot release. The idea is to have users maintain one AD password and don't have to remember the R/3 password anymore and also our Security team to avoid password maintenance.
I know there are 3 options for digital signature and
System signature with authorization by user ID and password (We use this currently)
Digital User signature with verification - (We would like to use this with AD userid/password, so the system still ask the users their AD userid/password for the authentication when they try to "sign" a document.)
User signature without verification
Do you think there is a way to configure the system in order to ask and check the active directory userid/password instead of SAP R/3 password? Where can I found documentation about it ?
I have several different versions of AS ABAP starting from NW 7.02 to NW 7.31.
My active directory is based on Windows 2008.
Thanks in advance!!
Dhee

Actually enabling Kerberos for SSO purposes and enabling Kerberos for digital signatures are two different topics although the latter is because of the former. I'm interested in the topic as well and I'm currently looking at different options. SAP provides a BAdI for the digital signature API which can be used for external authentication but they do not provide the solution to invoke Kerberos authentication based on username and password. SAP provides a semi solution with NWSSO 2.0 SP2 which works only on Windows with classic dynpros meaning SAP GUI for Windows is assumed. The solution is based on an ActiveX component which does the actual Kerberos authentication using the Secure Login Client which is part of the NWSSO suite. Extending that implementation to non-Windows and non-GUI applications would require some sort of web enabled service that could be used to authenticate the user with username and password. In case authentication is successful, a Kerberos token would be returned to SAP which would then be validated. All the required pieces are there since SAP has Kerberos support now in both stacks of the NetWeaver Application Server, some bits are still missing though which leaves customers looking at 3rd party or custom solutions.

Blocked no current digital signiture

Similar Messages

Maybe you are looking for