Blocked stock to scrapping

Hi Gurus,
We have done the good issue from blocked stock to scrapping with mvt type 555. Oubound delivery is created for that good issue with unrestricted stock type. We need outbound delivery with blocked stock type for that good issue. Where we need to do the settings to get our requirement.

there are SAP notes that explain that you can only do a delivery for stock in unrestricted use status
OSS Note 496992 - Goods issue for delivery: Stock type
OSS Note 547277 - FAQ: Requirements in SD and in the delivery
However, there are people who found some alternative solutions:
http://www.sapfans.com/forums/viewtopic.php?f=6&t=326327&p=990466
and
http://www.sapfans.com/forums/viewtopic.php?f=6&t=335451

Similar Messages

  • How to transfer material from blocked stock  to scrap location

    Dear Experts,
        Weu2019ve put some of raw material into blocked stock. Now we want to scrap these materials & for that Iu2019m trying to take it to unrestricted stock from blocked stock by MIGO (transfer posting ,Mvt type=343).
    But during that system shows an error message that u201CBest before/SLED of batch has been exceededu201D
    Due to this Iu2019m not able to scrap the material from blocked stock.
    Pls advise what to do .Is there some other way to do it??
    Thanks in advance

    Hi,
    You can directly scrap it from Blocked stock using movement type 555 . Further from the message it is observed that SLED( Self Life Expiration Date ) check is active for this material in material master . Try to scrap it in 555 mvt .
    Dhruba
    Edited by: Dhruba Charan Behera on May 18, 2011 12:51 PM

  • Movement type for Unrestricted to Blocked stock

    Can anyone tell the movement type for moving material from unrestricted storage location to Blocked stock for scrapping purpose.??
    Also tell if any other way is also there...??
    regards
    Inder Pal

    Dear sasikanth
    If I am correct,
    321 is for transferring quality to unrestricted and
    322 is reversal of 321
    which means, unrestricted to quality.
    Correct me if I am wrong.
    Thanks
    G. Lakshmipathi

  • Releasing GR Blocked Stock to any unrestricted storage location

    We have some stocks in non-valuated GR blocked stock which was posted from Purchase Order with movement type 103
    Now, the decision is to dispose the material. We have dedicated scrap location in system. Before disposing physically the material need to be cleared from system under GR blocked stock, even though it does not appear in any storage location in SAP
    Our Material Planning suggested that stores shall post release of GR blocked stock with movement type 104 so it will reverse the 103 movement previously, and clear the qty from system. But this in my opinion is against control viewpoint..i.e. stores should not use this way to clear system assigned stock to clear from system
    My suggestion was to use the following steps :
    1. MIGO>> Release GR blocked stock
    2. Put Material Document number (while posting 103), material details, qty, other references will be retrieved automatically
    3. The movement type is seen to be default as 105, change it to 910 (Release GR blocked stock for warehouse)
    4. Change Stock type from QM inspection to Unrestricted
    5. Assign Storage location to desired one (in my case I assigned SCRAP location)
    5. Select Item OK indicator to activate
    6. Check & Post
    Since the item has PO reference, my question to my expert friends is that will the above release from GR blocked stock post qty only to SCRP location or will it post Qty + value ?????
    I don't want Value to be posted to the scrap location.
    If the above process to move the stock qty (only) from GR Blocked stock to Scrap is success, I can ask accounts to post adjustment to clear scrap qty by 702 movement type.
    Thanks, Sunil

    Just set this que is complete so no one will try to open

  • Blocked Stock in Process Order

    Hello, Expert,
    When i doing the process order confirmation, total 100 pc for material A, is it possible to post 95 pc into quality inspection (stock type control for GR in process order header) and the other 5 pc posted to Blocked stock? In our real practise, these 5 pcs are damaged products.
    If it's possible, which movement type shall i use and how it works?
    Secondly, in the process order, can i consume the components in blocked type? (not Unrestricted Use)
    Many thanks,
    Vincent

    Hi
    UD means Usage Decision.
    1. You can mark it as a scrap quantiy for 5 pc.
    2. You can't consume the blocked stock components unless it is moved to Unrestricted stock.
    Experts, Correct me if I am wrong
    Thanks
    Saravana

  • Withdraw material from blocked stock at subcontractor

    Hi
    We have Third Party Order process where in materials are directly received to subcontracting vendor stock, when Goods receipt is posted in receving plant.
    Due to some error, few stocks have been posted to Blocked stock at Subcontractor.
    We would like to transfer the stock to unrestricted stock / scrap the stock from Subcontractor blocked stock.
    Kindly let me know your opinion to make transfer posting.
    Thanks and Regards
    Rajkumar

    Dear Yadav,
    1.
    Firste you wrote:
    Due to some error, few stocks have been posted to Blocked stock at Subcontractor.
    After that you stated this
    It is about restricted stock at subcontractor.
    2.
    And materials are not subjected to batch management. So we cannot use MSC2N.
    So, your first statement was that the material is in "blocked" stock, after that you stated that it is in restricted-use stock. But you also stated that the material is not batch managed.
    "Restricted-use" is the status of the batch, so your material should be batch managed if its status is restricted-use.
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/a5/63396b43a211d189410000e829fbbd/frameset.htm
    As I wrote you can use MB1A +553O if your material is in QI stock, if it is in restricted use you can't. If it is in restricted-use, please use MSC2N to change its status to unrestricted and after that comes MB1A + 551O.
    What is the real stock type the stock you are speaking? Who "posted" it to that stock type and how?
    Please give EXACT information.
    Thanks,
    Csaba
    Edited by: Csaba Szommer on Feb 10, 2009 10:50 AM

  • Stock Transfer of Blocked Stock Plant-to-Plant

    Hi..
    I have an issue regarding Stock Transfer of blocked stock from one Plant-to-Plant.
    I realize that blocked stock cannot be transfered directly.
    But the issue here is that if we cannot transfer the blocked stock directly, that means we have to do transfer posting from blocked stock to unrest use then stock transfer using mov type: 301. Then in the destination plant, we transfer again to blocked stock.
    If this is applied, then it will potentially raise other issues related to incorrect stock transfer by the other users once the material is released to unrest. use.
    So, in short, that's why we need to have direct stock transfer scenario for this issue.
    Kindly have your assistance
    Thanks in advance
    Albert

    Hello Albert,
    You are correct. We can not transfer blocked stock from one plant to another and you have to follow the same steps which you already mentioned.
    As per the business logc, We can not move "Blocked" (Business term: Rejected/scrapped/spoiled) material out of our business unit except Retrun to Vendor or Scrap it. so it is also not logical to move "THAT kind of Stock" to another plant.
    Hope this helps.
    Regards,
    Arif Mansuri
    Reward if answer is helpful.

  • Need non-return blocked stock option

    Hello,
    Currently we move certain types of missing/damaged inventory to restricted (Blocked) stock, movements 657/658. That way it does not flow through ATP, but it is being comingled with actual restricted product from customer returns. We would like them to be completely separate stocks. We currently transfer through MIGO and we do not have QM setup.
    Gary

    Thanks. We have 2 scenarios:
    1. For customer returns, we use 657 in order to block it so that we can look it over before returning to unrestricted.
    2. Sometimes, warehouse staff comes across stock that appears to be damaged or appears logically as unrestricted, but is not where it should be. In these cases we do a 344 to blocked and then do research, then we either scrap it or return to unrestricted.
    My requirement is to put scenario 2 into a separate bucket, so they are not mingled with customer returns.

  • Transferring goods from GR blocked stock

    Hi ,
    how can i transfer goods from GR blocked stock to any stock type (unrestricted,quality or blocked) without affecting moving average price.
    Regards

    >
    hima_1983 wrote:
    > Hi,
    >
    > My client is importing a lot of items  some of which is low value items , while receiving this type of items and explored some poor quality items , vendor will ask client not to return these rejected items back to hm  but just scrap it and the vendor will send fresh items instead of these rejected items or the client will place a debit note to the vendor.
    >
    > Regards
    Vendor does not want the material back, and for you this material is not okay with quality.
    What are you doing physically with the material?
    if you scrap it, then just cancel the goods receipt and the quantity is gone.
    if you dont scrap it, then create a new material master type UNBW nonvaluated. reverse the goods receipt done to good material, then receive e.g. with 501 movement to the UNBW material

  • Nullify the stock from Blocked Stock.

    Hi,
    I want to nullify the stock for a materials which is lying in blocked stock. The base unit of measurement for that material lying in blocked stock is 0 Ea but the parallel unit of measurement is 3.16 KG.
    Please guide how to nullify the stock for parallel unit of measurement of the material.

    Hi,
    Please check the below things.
    1. Check the material master whetner a conversion is maintained for EA and KG.
    2. You can try post the MI10 document for the blocked stock in the parallel unit.
    3.Or you can transfer post to the unrestricted and post a MI10 document or a scrap moment.
    4. with all the above trials if you find the error message no stock is available , then we can say that stock inconsistancy is there.
    5.Then check MM03 stock MMBE stock and MC.9 stock , if there is a variation then it is a inconsistancy.
    6.Check MB5b FOR the wrong posting.
    If there is a inconsistancy in the tables stock raise a OSS message or apply a sap note.
    Check for note on the service.sap.com
    Regards,

  • Blocked stock and Goods Receipt Blocked Stock

    Hie to all...
    can any one tell me what is  Blocked stock and Goods Receipt Blocked Stock?
    regards
    R.Reddy.

    Hi,
    Blocked stock: It is the stock lying in our stock. i.e this stock is valuated. Material is moved to blocked stock under following circumstances.
    1.GR is already made, but there are some quality issues which can not be solved immedaitely. At the same time one should prevent the use of that material.
    2.During assembly / inhouse storage / internal movement if the material gets damaged & you can not scrap the material immediately as you are not sure about the reason for damage.
    Goods receipt blocked stock: This stock is non valuated. It is done,
    1.If there is gate entry(103 movement) for the material, which will be verified & released by the stores (105 movement) after verifiing the material with respect to the documents sent by the vendor.
    Hope this answers your question.
    Regards,
    Krishna A S V

  • Diffrence between GR Blocked stock and Blocked stock

    Dear Seniors,
        Kindly tell me the difference between GR Blocked stock and Blocked stock ? in which case, we will move stock to GR blocked stock and blocked stock ??? kindly explain me please.
    Regards,
    JanaMM

    Hi
    Material can flow directly from goods receipt into consumption/usage or into the warehouse. However, It may also be placed into a blocked stock area first.
    Using the stock type, you can post the material into quality inspection stock or into blocked stock. In both cases, the material is already managed in the stock. Alternatively, the material can be conditionally accepted. Conditionally accepted deliveries for a purchase order are recorded in goods receipt blocked stock (GR blocked stock).
    The quantity posted into goods receipt blocked stock is not added to the inventory or managed as part of the inventory. It is only recorded in the purchase order history.
    You would use goods receipt blocked stock, for example, if the vendor's certificate for the delivered quantity were missing, or if you wanted to inspect a small quantity of the material before posting the actual goods receipt.
    When the conditions for acceptance are met, the material can be accepted into stock (for example, into unrestricted-use stock). The goods receipt is not valuated until this point.
    If the goods are to be returned to the vendor, instead, they can be taken directly from goods receipt blocked stock. Note, however, that a return delivery is possible even if the material was already posted into stock
    Blocked Stock is Valuated Stock. it is blocked for Certain reason.
    Blocked stock (not usually available from an MRP perspective and no withdrawals are possible for consumption)
    From blocked stock, you can withdraw only one sample, scrap a quantity, or post an inventory difference.
    If you want to withdraw goods from blocked stock for consumption, you first have to carry out a transfer posting to unrestricted-use stock.
    Thanks
    Dipak
    Edited by: Dipak J k on Sep 29, 2009 2:24 PM

  • Report for material moved from blocked stock to unrestricted stock

    Hi,
    Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
    Regards,
    Pratap

    It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
    Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

  • Report for GR Blocked Stocks

    Hi Everyone!
    May I ask if there's any other report aside from MMBE that can display the list of Materials that are currently in GR Blocked Stocks? (received using Movement Type 103)
    Thanks a lot!

    Hi........
    You have more than 4 t code for the same
    1) me2l  selection parameter WE104
    2) me2m selection parameter  WE104
    3) mmbe
    4) mb51 mov type 103
    Regards,
    Neha

  • Post serialized part from free to block stock with a follow up action

    Hi,
    I try to post a serialized part from free to block stock, but the standard function modules QMLR_FREE_TO_BLOCKED_STOCK,  QMLR_FREE_TO_BLOCKED_STOCK_ST2 work good with not serialized parts, but it doesn't works with serialized one.
    I create quality notification with serial number reference in RQM00-SERIALNR field, when I execute the follow-up function the M7175 error message appears.
    Someone know a solution to this issue?
    Thanks
    Marianna

    Hi The standard FM will not update the serial no for the material. So when you are doing the material movement through follow up action system can not move the material with out serial no. So you can change the functional module aith help of abaper to fetch the data from quality notification field.
    Regards,
    Smruti

Maybe you are looking for