Blocked stock
Hi expert,
Is any way to know the blocked stock material in date wise or periodic.
I want to know the blocked stock as on a particular date.
Its for Auditing purpose, if any body know plz help
faisal
You can extract month end stock report for Blocked stock.
MARD - Storage Location Data for Material
MARDH - Material Master Storage Location Segment: History
Field : SPEME - Blocked stock
LFMON - Current period (posting period)
By using MARD, you will get current available blocked stock.
By using MARDH, You will get previous months month end Blocked stock level.
Similar Messages
-
Report for material moved from blocked stock to unrestricted stock
Hi,
Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
Regards,
PratapIt would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria. -
Hi Everyone!
May I ask if there's any other report aside from MMBE that can display the list of Materials that are currently in GR Blocked Stocks? (received using Movement Type 103)
Thanks a lot!Hi........
You have more than 4 t code for the same
1) me2l selection parameter WE104
2) me2m selection parameter WE104
3) mmbe
4) mb51 mov type 103
Regards,
Neha -
Post serialized part from free to block stock with a follow up action
Hi,
I try to post a serialized part from free to block stock, but the standard function modules QMLR_FREE_TO_BLOCKED_STOCK, QMLR_FREE_TO_BLOCKED_STOCK_ST2 work good with not serialized parts, but it doesn't works with serialized one.
I create quality notification with serial number reference in RQM00-SERIALNR field, when I execute the follow-up function the M7175 error message appears.
Someone know a solution to this issue?
Thanks
MariannaHi The standard FM will not update the serial no for the material. So when you are doing the material movement through follow up action system can not move the material with out serial no. So you can change the functional module aith help of abaper to fetch the data from quality notification field.
Regards,
Smruti -
Report to check the valued GR block stock
Hi,
I used movement type 107 to receive the PO with indicator 'Origin Accept', and would like to check how many stock I have received to the valued GR block stock.
Anyone tell me which report I can use? I've checked the stock report under IM, but haven't found it.
Thanks!
Linrun Tcde MB52, and from change layout Ctrl+F8 move column Value BlockedStock.
-
Transaction for Blocked stock as on date
Hi,
Is there any transaction to get the blocked stock as on a particular date?
Regards,
SrinivasHi,
Please try it in T code MB5B where in you give movement type 103 and selection date and execute.
REgards
Ram -
Dear Expert
i want to know a report which help me to know the block stock in a company on a particular date . please help me in this regard
Regard
Edited by: usmfarhan on Nov 14, 2009 2:48 PMHi,
Go to MB51, here select plants and in posting date give the date range
and in movement type give the 103 - GR to Block Stock
343 - TR Blaock to Unrest
349 - TR Block to Inspection
do some excel work.
Regards,
Pardeep Malik -
Blocked stock on a particular past date.
In SAP is there any T code which will tell about, what is the total block stock in inventory during a particular past day.
I am not asking the qty moved to blocked stock on particular day. That we can get thru MB51 mvt types.
In MMBE, it will tell what is the blocked stock of particular material today. But I want to know what was the total blocked stock of particular material 5 days back.
Example: 31.01.08 I got, Mat X- 100 pcs in blocked stock.
12.01.08- Mat X- what was the stock.
I know our MMBE stock is dynamic and it changes time to time. Is there any logic to capture a previous day blocked qty.
A day for me means. 6.00am morning of that day. this I am mentioning because, stock can vary any time in a day.
I request someone to put, some vague idea so that I can also do brainstorming.
Thx
VinyCraig,
Thats what I was also thinking to do.
I have to see whether (summation of all 350 + 344 mvt type ) subracted by (summation of all 343 +349 mvt type) wrt a particular date.
But this will cause inconsistency if unexpected movement types come into picture future.
Is there any option to bring MMBE T code in notification action box. If so what is the functional module for that.
Thx
Viny -
Hi Experts,
Is there any report in which we can get the total stock as on date which will not include the blocked stock qty.
Regards,
Manish Jainsomething like "MB5B ignoring blocked stock" is not available.
if you need to know the quantity at a day in the past without consideration of blocked stock, then you have to develope a report like MB5B yourself.
or you do it the easy way: just execute MB52 as background job and save the spool files.
or create a small ABAP to write the stock dayly from MARD(and some other tables) to a Z- table -
T code QA11, quantity can not be posted to blocked stock
For Inspection lot with system status is INSP RREC SPRQ, when user tries to perform QA 11 to post stock to blocked stock the system does not allow as "to blocked stock field" is greyed out and also can not chnage the storage location on that screen.
I have checked the material already exists in the WH/storage location also inspection charachterstics are corrct not sure what else to check.please advise.Does not seem like authorisation restriction since user is able to process other QA11 for the same plant/WH and storage location. Does not seem like customisation either since all " Quantity to be posted "options and storage location are greyed out under inspection lot stock Tab
After Accept atleast system should allow posting to "unrestricted stock " but thats not available either.
For the same material/plant/WH, I am able to sucessfully post stock when system status is -REL CALC SPRQ but in this case the status is -INSP RREC SPRQ, what does this signify.Please help -
GRN to Blocked stock and Excise Invoice
First the material truck comes to the factory gate and the security enters in the sheet and informs to stores regarding the truck with materail for the sample quality check.the stores inform to quality and the sample is checked by the quality and send the results to the stores.If the material is ok then the vehicle come in to factory and if else it's poor quality then the vehicle is sent back as it is called as first level quality
if the material rejected then it will be sent back but no excise capture will be entered.
if the material is approved from the stores then the entry will be done in the normal system with the excise capture.and GRN then the material again go for second quality for the total lot.
Stores Deptt. checks all the document such as Invoice Original Copy, Transpoter Copy for CENVAT Credit, form31 (where applicable), P.O. reference and Storage Space etc.
How to track the material with the excise and GRN entry when it comes at the gate with first quality and second quality.if i put the material into the block stock.or any other way to take care of this processHi
You can do the Goods receipt in two steps using movements 103 & 105.
In 103 the GR is odne inot GR-Blocked stock, but no accounting documents are trigerred.
If the material is rejected in first quality chek you can revese the same with 104.
If the Material is correct & you have taken the material in use movemnt 105, referncing the 103 Material document. Here you can capture the excise invoice & other details. Accounting document gets generated.
You can track the process using MB51 Material document report for 103 & 105 movements.
Thanks & regards
Kishore -
Error while cancelling GR material is at Block stock
Hi,
I have created a GR for material QM view is maintain , after GR material updated from QM it is rejected, then we have transfer it in Blocked stock in QA11 now we want to cancel the GR, but while GR cancel with MBST or MIGO the stock type it is shoing as X i.e quality stock now in quality stock is 0 because material is at blocked stock. so while cancelling it is giving error as Deficit of SL Stck.in qual.insp 5,000 NO : 928 MS10 S101
how to solve this,
regards,
zafarHi
you have to move the stock first quality only. once you got the stock in quality you can send the material to vendor with (122) movement type.
For your reference:
1. SAP NOTE 175842 needs to be implemeted first.
2. User Exit QEVA0008 needs to be activated.
3. Then First of all reverse the UD by transaction QA12, by clicking the Customer Function Tab.
4. Now the stock can be reversed for the same Lot by running program RQEVAC50 in SE38.
above procedure you have to do must if amterial belongs to quality.
laxman -
Is it possible to enter GR in GR Blocked stock without reference to PO
Hi Experts,
Is it possible to enter GR in GR Blocked Stock without reference to PO?
Regards
ManasHI All,
I need the GR in GR Blocked stock and not in Blocked Stock.
Scenario is : Material came to the gate without PO reference. Client told to enter the material into GR blocked stock. Po will be raised soon.
Please help,
Manas -
Hi everyone,
Can any one give me any t-code or Program name to display list of Blocked Stock in a given plant/project.
Thanks,
Sukriti....Hi Sukruti,
You may use Transaction code - SE16 and then use TABLE - MARD.
select field KZILS in choose fields...
obviously You may do selection field as PLANT for generating List of BLOCKED Stock.
You will get it. -
Goods Issue against outbound delivery from blocked stock
Dear All
I want to do goods issue against outbound delivery created without any reference from blocked stock of my storage location. Is there any way I can achieve this? I know normally SAP allows goods issue from unrestricted stock but my business scenario requires goods issue to be done from blocked stock against outbound delivery.
Please let me know any solution for this.
Thanks and Regards
Satish KumarHi
Check this link where similar issue has discussed and its resolved as well. Please try this and update the findings. If possible could you share the background of this strange requirement.
http://scn.sap.com/thread/1541911
Thank$
Maybe you are looking for
-
SQL Developer 1.5.3 - Why is "Find and Replace" now a model dialog?
In SQL Developer 1.5.3 the find and replace dialog is now a modal dialog. This prevent you from copying content from below it. Basically only option is to type instead of copy and paste Very frustrating!
-
my mac book air has a virus which is creating a lot of issues...how do i get rid of it? is there a free software to detect it and remove it?
-
Mainstage 2: Apparent issues after memory upgrade
I'm wondering if upgrading from 4GB to 8 has caused some problems. After installing the proper memory upgrade (Crucial) I've had this result: 1. The increased memory shows up in 'About this Mac'. So far so good. 2. When I open a large Mainstage conce
-
Hi All, My project is using ABAP Routines for the conversion and transfer of datas, can you please let me know in detail about these ABAP routines how these are written and if any available ones readily. Thank you sirs.. Regards
-
How to change the engine's status
How to change the engine's status? Thanks