Blocking a particular wireless network?

I'd like to prevent Airport from seeing or connecting to a particular wireless network - is that possible? If so, how?
I have a MacBook Pro, Mac OS X, version 10.4.11.
Thanks!
MacBook Pro Mac OS X (10.4.11)

Hi ghuggins, and a warm welcome to the forums!
I don't think you can block it showing up, but you can stop it connecting to it.
Go to System Preferences
Click Network
Highlight AirPort and click Configure...
Choose “By default, join: Preferred networks”
Select that access point.
Remove that access point with the minus button.
Launch your keychain access in Utilities and delete that access point keychain entry if it exists.
Go to System Preferences: Security. Check the box next to "Require password to unlock each secure system preference." Then lock Security.
Go back to the “By default, join:” page and click the plus this time to add your access point, if not there. Enter the correct password, save, reboot.

Similar Messages

How to block one of wireless network

Hi there,
I have Airport Extreme with 2 wireless networks, one for my iMac and my wife’s iPad another one is for kids PCs. All of us are connected only wireless.
Question, how shall I block the kids network my configuration, now when I block the Airport (Turn Off Airport) actually it’s only me who cannot use wireless network, all others still can do it. Purpose is to block the kids using the wireless network during the night. Now my solution is to pull out lan cable between Airport and ADSL modem.
I believe there must be smarter way to do it, I just don’t know how. Could you please help,
thanks

Hello!
Your Extreme can set time restrictions on when specific computers can access the network. You can configure them using AirPort Utility:
Open AirPort Utility, select your Extreme in the sidebar, and press "Manual Setup." If you're asked for a password, enter it. Go to the "Access Control" tab and set "MAC Address Access Control" to "Timed Access."
Now you can set up the time restrictions.
To add a computer to the list, press the "+" button. You'll be presented with a dialog that will let you configure the time restrictions. You'll need to enter the device's MAC address. You'll also want to enter a description so that you'll know what device the restriction applies to.
You can double-click the "(default)" entry to set restrictions on computers not on your list. When you're finished, press "Update" and allow your Extreme to restart.

Block Connection to Wireless Network

How can I prevent my computer from joining a certain Network? Is there a way to block a wireless connection so the network does not even show up in my Airport list?

System Preferences > Network > Airport > Airport Tab
By default join: Preferred networks
Ensure that only your network is in that list.
Is there a way to block a wireless connection so the network does not even show up in my Airport list?
No

MBP having problems with one particular wireless network

My MBP keeps dropping the wireless connection (or failing to find it in the first place) at one particular house. Unfortunately it's a house where I stay a lot. It tells me I'm not connected to the internet and times out any attempted connections. Sometimes it will connect for between 5 minutes and an hour, but then it loses connection again.
When it loses connection the other devices in the house (a Blackberry, iphone and someone elses Mac) all stay connected with no problem. I have never had problems in any other house or with any other connection.
The wireless has a WAP (or WAP 2) password. I have tried resetting and rebooting the modem, the router and the access point, getting Airport to learn or not learn the network, turning airport off and on and all the other usual options (for a clueless muppet like me) and sometimes I can connect again, sometimes not, but the connection is never permanent.
Any ideas please? Thanks very much
I'm on Mac OSX 10.6.7 if that is relevant

Sorry for being so clueless but I'm not sure of the answer to the first two questions. How do I find out?
There is nothing in my network preferences about protocol, but under "About this Mac" I found the following:
Supported PHY Modes: 802.11 a/b/g/n
There is nothing else nearby competing for radio frequencies - just the other devices mentioned all using the smae wireless signal.
Thanks so much for your help, and sorry that all the technical terms are so lost on me!

Macbook Pro will not remember wireless network

We have two Macbook Pros and are having issues with one of them not finding and then not remembering a particular wireless network. The other one works normally on this network, as do our iPad and iPhones.
The problem Macbook Pro will find a number of other wireless networks in the vicinity, but not the one we wish to connect with. However, when the required information about the network is entered into the Network Preferences, it does see the network and will connect with it, until the computer is shut down. When it is powered-up again, the Macbook will not find it, even though, in theory, it had been told to remember it and that network had been moved up to #1 in the order of priority.
The settings on both Macbooks are the same, so why can one find and remember the network and the other not? What can I do about the problem?
Help please!

Settings for wireless network connections are actually stored in two separate places on your Mac, so in addition to the correct advice offered by Jolly Giant, you will also need to delete old network listings in KeyChain Access.
Macintosh HD > Applications > Utilities > KeyChain Access
Locate the name of the wireless network that you want to delete and click it to highlight it
Click Delete on your keyboard
It would be a good idea to go ahead and also delete the current connection as well in case it has become corrupted. This will clear out the old settings and when you next connect to the network and enter the password, the new settings will be preserved.

Is it possible to block a particular wi-fi network on the iPhone 3G?

Is it possible to block a particular wi-fi network on the iPhone 3G? We don't have a wi-fi network where I work, so I connect over 3G. Problem is, another company on the floor below us does have a wi-fi network which keeps popping up in my "Choose a wireless network" list. I don't have access to their network, so I'd like to put that on a blocked list of sorts so that I don't see it pop up every time I try to open the App Store, Safari or my mail.
Any suggestions?

I guess turning off the "Ask to Join Networks" option is the easiest, although it sorta ***** having to disable a feature on the phone that would have uses elsewhere (i.e. sometimes you get to a place that has wi-fi that you wouldn't normally expect to - with the option turned off, you'll never know it). It'd be awesome to have some sort of config file that you could put "Network X" on a Do Not Join list, though...

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

I've got a wireless network with one iMac and a Vista PC, on the Vista PC is through USB a printer connected. How can i print from my iMac to that particular printer ?

You need to turn on Printer Sharing on both the PC and OS X. I can't help you on Vista but in OS X it's System Preferences - Sharing - check the Printer Sharing box.

Blocking a computer in wireless network

I have a wireless network in my restaurant so all the guest can surf the net for free.
I also have my business desktop computer that uses the same internet access with wire.
how can I block the wireless users from this computer, so it's invisible and not accessible to them ?
Thanks,
Yuval

Sorry, but the suggestion posted by Ricewind is not correct. Setting the IP of the second (wired) router to 192.168.1.2 will place it on the same subnet as the wireless router, and will provide no security between the wireless and wired router.
Please connect your system the way I described in my previous post.
The only setting that is required is to set the "Local IP address" of the wired router to 192.168.2.1 . Also, you must make sure that a LAN port on the wireless router is connected to the Internet port of the wired router.
Just as the Internet port of your router protects you from hackers on the Internet, so too will the Internet port of the wired router protect you from wireless hackers at your business. The Internet port is designed to ignore all unrequested data that arrives at the port, making it very hard for any hacker to break in.
Even in the two router setup, it is probably best, in the wireless router, to set "AP isolation" to "enabled". This assumes that you will not be connecting a printer to the wireless router for your customers to use. By setting "AP isolation" to "enabled", it will help protect your customers from hacking into each other's computers.
Message Edited by toomanydonuts on 02-12-2008 02:42 AM

Unable to block Non-Corprate machine access to CORP wireless network

Hello everyone
I am facing this problem right now , I created rule 1 for host authentication and rule 2 for user authentication ,but seems I am unable to block non-corprate machine * IPAD or smart phone* to access CORP wireless network if people put vaild domain user name and password.
Here is deatils and please help.
Rule 1 --Host AUTH---
External Groupls : AD1
Protocol: Radius
Was Machine Authenticated: -ANY-
System name : start with host/
Results : Permit Access
Rule 2 --User AUTH---
External Groupls : AD1
Protocol: Radius
Was Machine Authenticated: -true-
System name : -ANY-
Results : Permit Access
Default : Deny Access
Now , If I connect personal smart phone with windows username and password , ACS is able to blocked , screenshot as follow
But ,If I connect same personal phone with "domain\username" and password , the phone is able to connact , and here is screenshot.
Question is why matched "host AUTH" rule when I use "domain\username " on personal phone ? However, I do check the system name in "host AUTH" and permit access until system name start with "host/ " , so how come , this person is able to passed the rule .

We don't have BYOD at this moment , so we don't want employee access CORP wireless network with their personal devices.
Back to question, I was able to authenticate the laptop by machine name and seems work if I only type the username without domain .
But if I type "domain\username " into phone, I am able to connect it , I don't know why this can be happened and how to fix.
Please show off your kind help , thanks all

Neighbor's wireless network not secured, anyway to block it?

Hi guys,
I'm using road runner and have parental control so that I can monitor my kids using the internet. The problem I have is that one of my neighbor's Linksys wireless network is not secured and my kids are using it to play on line games, you tube, etc. and stay up late at night and not doing home work. Anyway that I can block his signal? Like to have your opinion about this situation. Thank you and any help will be greatly appreciated.
Message Edited by ono8ono on 10-21-2008 01:32 AM

Well, then either lock down the computers of your children, take them away during night. Even if you convinced the last person to secure his wireless network you would still have to tell everyone to use WPA2 or WPA with a strong passphrase. WEP is easily cracked within a few minutes with tools readily available. Plus, if you see eight wireless networks broadcasting their SSID you probably have a few more not broadcasting the SSID, a couple of them will probably be open or WEP secured, too.
And then, once you have them all convinced to use WPA you must constantly monitor the environment for new wireless routers.
So basically, for most people trying to block their children through the router or even through the computer is futile. Children have far better resources at hand to tackle any problem you may cause them limiting internet. The only really reliable way to do this is the good old way of limiting access to the computer/device. Just like TV. Far more reliable, far more secure, far easier to implement, far easier to understand.
If you thought so far that a high tech computer and a high tech router should be able to do high tech things to keep your children out: computers are still dumb devices and no match to a teenager desperate enough.

HT202663 how can i block another wireless network?

I've noticed that at periods throughout the day my network slows down considerably. I did a wireless diagnostics report and found an external wireless network with a TW (Taiwan) country code is nearby. I'd like to block it. How can I do this?

You may want to check if the adjacent networks are using the same WiFi channel you are using.
Try a utility such as iStumbler.
For 2.4GHz frequences, you want to be on a channel all by yourself and 5 channels away from the strongest signals. That means channels 1, 6, or 11 typically. Outside the US, some countries allow channels 12 & 13, so you may play different 5 channel apart games.
The 5GHz frequencies are better spaced so as long as you are not using the same channel, all is OK.
If you are using channels that conflict, then you can get interference that may slow down your WiFi.
Another approach is to make an Ethernet connection instead of WiFi, and see if your performance improves. If it does, then it may be WiFi interference. If it does not improve, then it may be how fast your Internet connection is working.
I know a lot of people using Cable based broadband that see performance slow down when school lets out and the neighborhood kids start watching YouTube videos and chewing up the shared neighborhood bandwidth.

Blocking a particular network

Every day when I come into work and open my MBP, it asks me if I want to connect to the network downstairs, so I have to say no. Is there any way to block a particular network, so my computer knows never to suggest connecting to it? I don't want to turn off Airport.

You can set up AirPort to connect only to Preferred Networks. If you are in 10.5, when you go into your Network preference click the Advanced button and the options will be there under AirPort. On the main Network screen, you can uncheck "Ask to join new networks."
If you want it to behave differently at work and at home or other places, set up a new network Location and give it different settings. That's what I do, I have Home and Work locations.

[SOLVED] Cannot connect to wireless networks any more after update

Hello,
I updated my system some days ago and, after that, I can't connect to wireless networks any more.
My network card is ath9k and I'm currently using wicd.
When I try to connect to my wireless network, I get "Veryfing AP association" message, then it fails to connect.
Here's the dmesg output :
[ 6369.650201] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6369.824358] r8169 0000:05:00.0 eth0: link down
[ 6369.824375] r8169 0000:05:00.0 eth0: link down
[ 6369.824398] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6369.936721] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6371.462702] r8169 0000:05:00.0 eth0: link up
[ 6371.462718] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6373.214209] wlan0: authenticate with 00:1c:10:57:47:17
[ 6373.236813] wlan0: send auth to 00:1c:10:57:47:17 (try 1/3)
[ 6373.248706] wlan0: authenticated
[ 6373.248735] ath9k 0000:09:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[ 6373.248737] ath9k 0000:09:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 6373.248739] ath9k 0000:09:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 6373.250756] wlan0: associate with 00:1c:10:57:47:17 (try 1/3)
[ 6373.253150] wlan0: RX AssocResp from 00:1c:10:57:47:17 (capab=0x411 status=0 aid=3)
[ 6373.253379] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6373.253418] wlan0: associated
[ 6373.253431] ath9k 0000:09:00.0 wlan0: failed to set key 0
[ 6405.384916] wlan0: deauthenticating from 00:1c:10:57:47:17 by local choice (reason=3)
[ 6405.387398] cfg80211: Calling CRDA to update world regulatory domain
[ 6409.789779] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6409.890892] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6410.069734] r8169 0000:05:00.0 eth0: link down
[ 6410.069750] r8169 0000:05:00.0 eth0: link down
[ 6410.069778] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6410.263183] r8169 0000:05:00.0 eth0: link down
[ 6410.263212] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6411.717705] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6411.898268] r8169 0000:05:00.0 eth0: link down
[ 6411.898297] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6413.630832] r8169 0000:05:00.0 eth0: link up
[ 6413.630848] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6415.903790] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6416.089275] r8169 0000:05:00.0 eth0: link down
[ 6416.089302] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6416.089327] r8169 0000:05:00.0 eth0: link down
[ 6416.386308] r8169 0000:05:00.0 eth0: link down
[ 6416.386338] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6418.067675] r8169 0000:05:00.0 eth0: link up
[ 6418.067691] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
This particular line caught my attention: " wlan0: de-authenticating from 00:1c:10:57:47:17 by local choice (reason=3)". So I searched for it (without the MAC address) on the internet and found several solutions for it, involving wpa_supplicant, dhcpcd, IPv6 (disable it on /etc/sysctl.d/40-ipv6.conf) and card power management (operation not supported, don't have option on BIOS), but none of them worked for me.
Here's an excerpt from /var/log/wicd/wicd.log:
2014/03/01 11:48:15 :: Connecting to wireless network Curiosity
2014/03/01 11:48:15 :: Putting interface down
2014/03/01 11:48:15 :: Releasing DHCP leases...
2014/03/01 11:48:15 :: Setting false IP...
2014/03/01 11:48:15 :: Stopping wpa_supplicant
2014/03/01 11:48:15 :: Flushing the routing table...
2014/03/01 11:48:15 :: Putting interface up...
2014/03/01 11:48:17 :: Attempting to authenticate...
2014/03/01 11:48:19 :: Setting static IP : 192.168.2.188
2014/03/01 11:48:19 :: Setting default gateway : 192.168.2.1
2014/03/01 11:48:19 :: Verifying AP association...
2014/03/01 11:48:19 :: Attempt 1 of 10...
2014/03/01 11:48:24 :: Attempt 2 of 10...
2014/03/01 11:48:27 :: Attempt 3 of 10...
2014/03/01 11:48:30 :: Attempt 4 of 10...
2014/03/01 11:48:33 :: Attempt 5 of 10...
2014/03/01 11:48:36 :: Attempt 6 of 10...
2014/03/01 11:48:39 :: Attempt 7 of 10...
2014/03/01 11:48:42 :: Attempt 8 of 10...
2014/03/01 11:48:45 :: Attempt 9 of 10...
2014/03/01 11:48:48 :: Attempt 10 of 10...
2014/03/01 11:48:51 :: Connection Failed: Failed to ping the access point!
2014/03/01 11:48:51 :: exiting connection thread
2014/03/01 11:48:55 :: Sending connection attempt result association_failed
2014/03/01 11:48:55 :: Autoconnecting...
2014/03/01 11:48:55 :: Attempting to autoconnect with wired interface...
2014/03/01 11:48:55 :: Putting interface down
2014/03/01 11:48:55 :: Releasing DHCP leases...
2014/03/01 11:48:55 :: Setting false IP...
2014/03/01 11:48:55 :: Stopping wpa_supplicant
2014/03/01 11:48:55 :: Flushing the routing table...
2014/03/01 11:48:55 :: Putting interface up...
2014/03/01 11:48:58 :: Setting static IP : 192.168.2.188
2014/03/01 11:48:58 :: Setting default gateway : 192.168.2.1
2014/03/01 11:48:58 :: Connecting thread exiting.
2014/03/01 11:49:01 :: Putting interface down
2014/03/01 11:49:01 :: Releasing DHCP leases...
2014/03/01 11:49:01 :: Setting false IP...
2014/03/01 11:49:02 :: Stopping wpa_supplicant
2014/03/01 11:49:02 :: Flushing the routing table...
2014/03/01 11:49:02 :: Putting interface up...
2014/03/01 11:49:04 :: Setting static IP : 192.168.2.188
2014/03/01 11:49:04 :: Setting default gateway : 192.168.2.1
2014/03/01 11:49:04 :: Connecting thread exiting.
2014/03/01 11:49:07 :: Sending connection attempt result success
I've been connecting through wire since then and it's extremely uncomfortable being planted in one place.
Thanks.
Last edited by joaowojwicz (2014-04-03 12:17:53)

ewaller wrote:Well, let's start with a couple sanity checks. Look at the output of uname -a and of pacman -Qi linux and ensure that the running kernel (uname) is the same version that is installed.
Then. please post the output of lspci -nn and of ip link
Then, take a look at the output of sudo iw wlan0 scan
and see if you can see your AP. Also, verify that your wireless is called wlan0 by checking the ouput of ip link
Okay
>>log: uname -a
Linux Canopus 3.13.5-1-ARCH #1 SMP PREEMPT Sun Feb 23 00:10:07 CET 2014 i686 GNU/Linux
>>log: pacman -Qi linux
Name : linux
Version : 3.13.5-1
Description : The Linux kernel and modules
Architecture : i686
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.13.5
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 61687.00 KiB
Packager : Thomas Bächler <[email protected]>
Build Date : Sat 22 Feb 2014 20:11:46 BRT
Install Date : Mon 24 Feb 2014 02:50:00 BRT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : SHA256 Sum
>>log: lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0116] (rev 09)
00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 05)
00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 05)
00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b5)
00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b5)
00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b5)
00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b5)
00:1c.7 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 [8086:1c1e] (rev b5)
00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 05)
00:1f.0 ISA bridge [0601]: Intel Corporation HM67 Express Chipset Family LPC Controller [8086:1c4b] (rev 05)
00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 05)
00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 05)
05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
09:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
0b:00.0 USB controller [0c03]: NEC Corporation uPD720200 USB 3.0 Host Controller [1033:0194] (rev 04)
Yes, my wireless is called wlan0. I linked something to /dev/null to get the predictable names
>>log: ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether 94:39:e5:f2:17:3f brd ff:ff:ff:ff:ff:ff
3: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT group default qlen 1000
link/ether 18:03:73:93:4d:1b brd ff:ff:ff:ff:ff:ff
I'll just paste my wireless connection here.
>>log: sudo iw wlan0 scan
BSS 00:1c:10:57:47:17(on wlan0)
TSF: 59645240249 usec (0d, 16:34:05)
freq: 2462
beacon interval: 100 TUs
capability: ESS Privacy ShortSlotTime (0x0411)
signal: -31.00 dBm
last seen: 260 ms ago
Information elements from Probe Response frame:
SSID: Curiosity
Supported rates: 1.0* 2.0* 5.5* 11.0* 18.0 24.0 36.0 54.0
DS Parameter set: channel 11
ERP: Barker_Preamble_Mode
ERP D4.0: Barker_Preamble_Mode
Extended supported rates: 6.0 9.0 12.0 48.0
karol wrote:
Post the list of packages that were updated.
When posting configs, code or command output, please use [ code ] tags, not [ quote ] tags https://bbs.archlinux.org/help.php#bbcode
like this
It makes the code more readable and - in case of longer listings - more convenient to scroll through.
Okay, put code tag now. Here's the whole log since Feb, 24th. This was the day I started having problems.
[2014-02-24 02:32] [PACMAN] Running 'pacman -Suy'
[2014-02-24 02:32] [PACMAN] synchronizing package lists
[2014-02-24 02:32] [PACMAN] starting full system upgrade
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 6 trust: 0-, 0q, 0n, 0m, 0f, 1u
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 6 signed: 60 trust: 1-, 0q, 0n, 5m, 0f, 0u
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 60 signed: 4 trust: 60-, 0q, 0n, 0m, 0f, 0u
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-03-31
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Importing owner trust values...
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 7FA647CD89891DEDC060287BB9113D1ED21E1A55...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 63F395DE2D6398BBE458F281F2DBB4931985A992...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 8F76BEEA0289F9E1D3E229C05F946DED983D4366...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 66BD74A036D522F51DD70A3C7F2A16726521E06D...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key 81D7F8241DB38BC759C80FCE3A726C6170E80477...
[2014-02-24 02:49] [ALPM-SCRIPTLET] -> Disabling key E7210A59715F6940CF9A4E36A001876699AD6E84...
[2014-02-24 02:49] [ALPM-SCRIPTLET] ==> Updating trust database...
[2014-02-24 02:49] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2015-03-31
[2014-02-24 02:49] [PACMAN] upgraded archlinux-keyring (20140124-1 -> 20140220-1)
[2014-02-24 02:49] [PACMAN] upgraded hicolor-icon-theme (0.12-2 -> 0.13-1)
[2014-02-24 02:49] [PACMAN] upgraded banshee (2.6.1-2 -> 2.6.2-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-cups (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-hid2hci (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-libs (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-plugins (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded bluez-utils (5.14-1 -> 5.15-1)
[2014-02-24 02:49] [PACMAN] upgraded cairo-perl (1.103-2 -> 1.104-1)
[2014-02-24 02:49] [PACMAN] upgraded cups-filters (1.0.45-1 -> 1.0.46-1)
[2014-02-24 02:49] [PACMAN] upgraded dbus-glib (0.100.2-1 -> 0.102-1)
[2014-02-24 02:49] [PACMAN] upgraded dialog (1:1.2_20140112-1 -> 1:1.2_20140219-1)
[2014-02-24 02:49] [PACMAN] upgraded easytag (2.1.9-1 -> 2.1.10-1)
[2014-02-24 02:49] [PACMAN] upgraded ethtool (1:3.11-1 -> 1:3.13-1)
[2014-02-24 02:49] [PACMAN] upgraded flashplugin (11.2.202.336-1 -> 11.2.202.341-1)
[2014-02-24 02:49] [PACMAN] upgraded libpng (1.6.8-1 -> 1.6.9-1)
[2014-02-24 02:49] [PACMAN] upgraded gdk-pixbuf2 (2.30.4-1 -> 2.30.5-1)
[2014-02-24 02:49] [PACMAN] upgraded glib-perl (1.301-1 -> 1.304-1)
[2014-02-24 02:49] [PACMAN] upgraded gparted (0.17.0-2 -> 0.18.0-1)
[2014-02-24 02:49] [PACMAN] upgraded pango-perl (1.224-2 -> 1.225-1)
[2014-02-24 02:49] [PACMAN] upgraded gtk2-perl (1.247-2 -> 1.249-1)
[2014-02-24 02:49] [PACMAN] upgraded imagemagick (6.8.8.6-1 -> 6.8.8.7-1)
[2014-02-24 02:49] [PACMAN] upgraded kdesdk-poxml (4.12.2-1 -> 4.12.2-2)
[2014-02-24 02:49] [PACMAN] upgraded libass (0.10.2-2 -> 0.11.1-1)
[2014-02-24 02:49] [PACMAN] upgraded libfm (1.1.2.2-2 -> 1.2.0-3)
[2014-02-24 02:49] [PACMAN] upgraded libftdi (1.1-2 -> 1.1-3)
[2014-02-24 02:49] [PACMAN] upgraded libindi (0.9.6-7 -> 0.9.7-1)
[2014-02-24 02:49] [PACMAN] upgraded linux-firmware (20140123.418320b-1 -> 20140217.343e460-1)
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-02-24 02:50] [ALPM-SCRIPTLET] depmod: ERROR: Module 'hci_vhci' has devname (vhci) but lacks major and minor information. Ignoring.
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Starting build: 3.13.5-1-ARCH
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-02-24 02:50] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-02-24 02:50] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> WARNING: AT keyboard support is no longer built into the kernel.
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> In order to use your keyboard during early init, you MUST
[2014-02-24 02:50] [ALPM-SCRIPTLET] >>> include the 'keyboard' hook in your mkinitcpio.conf.
[2014-02-24 02:50] [PACMAN] upgraded linux (3.12.9-1 -> 3.13.5-1)
[2014-02-24 02:50] [PACMAN] upgraded linux-headers (3.12.9-1 -> 3.13.5-1)
[2014-02-24 02:50] [PACMAN] upgraded lirc-utils (1:0.9.0-69 -> 1:0.9.0-70)
[2014-02-24 02:50] [PACMAN] upgraded lynx (2.8.7-7 -> 2.8.8-1)
[2014-02-24 02:50] [PACMAN] upgraded man-pages (3.58-1 -> 3.60-1)
[2014-02-24 02:50] [PACMAN] upgraded mercurial (2.9-1 -> 2.9-2)
[2014-02-24 02:50] [PACMAN] upgraded mutter (3.10.3-1 -> 3.10.4-1)
[2014-02-24 02:50] [PACMAN] upgraded networkmanager (0.9.8.8-1 -> 0.9.8.8-3)
[2014-02-24 02:50] [PACMAN] upgraded networkmanager-pptp (0.9.8.4-1 -> 0.9.8.4-2)
[2014-02-24 02:50] [PACMAN] upgraded pcmanfm (1.1.2-2 -> 1.2.0-1)
[2014-02-24 02:50] [PACMAN] upgraded postgresql-libs (9.3.2-4 -> 9.3.3-1)
[2014-02-24 02:50] [PACMAN] upgraded ppp (2.4.5-8 -> 2.4.6-1)
[2014-02-24 02:50] [PACMAN] upgraded python2-configobj (4.7.2-6 -> 5.0.1-1)
[2014-02-24 02:50] [PACMAN] upgraded python2-urwid (1.1.1-1 -> 1.2.0-1)
[2014-02-24 02:50] [PACMAN] upgraded python2-zope-interface (4.0.5-2 -> 4.1.0-1)
[2014-02-24 02:50] [PACMAN] upgraded sbc (1.1-1 -> 1.2-1)
[2014-02-24 02:50] [PACMAN] upgraded t1lib (5.1.2-4 -> 5.1.2-5)
[2014-02-24 02:50] [PACMAN] upgraded totem-plparser (3.10.0-4 -> 3.10.1-1)
[2014-02-24 02:50] [PACMAN] upgraded vimpager (1.8.5-1 -> 1.8.6-1)
[2014-02-24 02:50] [PACMAN] upgraded vlc (2.1.3-1 -> 2.1.4-1)
[2014-02-24 02:50] [PACMAN] upgraded webkitgtk (2.2.4-2 -> 2.2.5-1)
[2014-02-24 02:50] [PACMAN] upgraded wine (1.7.12-2 -> 1.7.13-1)
[2014-02-24 02:50] [PACMAN] upgraded xarchiver (0.5.2-6 -> 0.5.3-1)
[2014-02-24 02:50] [PACMAN] upgraded xcb-util-wm (0.4.0-1 -> 0.4.1-1)
[2014-02-24 02:50] [PACMAN] upgraded xmlto (0.0.25-3 -> 0.0.25-5)
[2014-02-24 02:50] [PACMAN] upgraded youtube-dl (2014.02.13-1 -> 2014.02.22.1-1)
[2014-02-24 12:51] [PACMAN] Running 'pacman -Suy'
[2014-02-24 12:51] [PACMAN] synchronizing package lists
[2014-02-24 12:51] [PACMAN] starting full system upgrade
[2014-02-24 12:57] [PACMAN] upgraded ffmpeg (1:2.1.3-1 -> 1:2.1.4-1)
[2014-02-24 12:57] [PACMAN] upgraded libwbclient (4.1.4-1 -> 4.1.5-1)
[2014-02-24 12:57] [PACMAN] upgraded python2-configobj (5.0.1-1 -> 5.0.1-2)
[2014-02-24 12:57] [PACMAN] upgraded s-nail (14.5.2-4 -> 14.6-1)
[2014-02-24 12:57] [PACMAN] upgraded smbclient (4.1.4-1 -> 4.1.5-1)
[2014-02-24 12:57] [PACMAN] upgraded samba (4.1.4-1 -> 4.1.5-1)
[2014-02-24 12:57] [PACMAN] upgraded xbmc (12.3-8 -> 12.3-9)
[2014-02-24 13:19] [PACMAN] Running 'pacman -Syy'
[2014-02-24 13:19] [PACMAN] synchronizing package lists
[2014-02-24 13:20] [PACMAN] Running 'pacman -Suu dhcpcd'
[2014-02-24 13:20] [PACMAN] starting full system upgrade
[2014-02-24 13:24] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/downgrade/downgrade-3.3-1-any.pkg.tar.xz'
[2014-02-24 13:24] [PACMAN] installed downgrade (3.3-1)
[2014-02-24 16:04] [PACMAN] Running 'pacman -Suy'
[2014-02-24 16:04] [PACMAN] synchronizing package lists
[2014-02-24 16:04] [PACMAN] starting full system upgrade
[2014-02-24 16:04] [PACMAN] upgraded vim-spell-br (20120506-1 -> 20120802-1)
[2014-02-24 16:04] [PACMAN] upgraded vim-spell-en (20120506-1 -> 20120802-1)
[2014-02-24 18:30] [PACMAN] Running 'pacman -Suy'
[2014-02-24 18:30] [PACMAN] synchronizing package lists
[2014-02-24 18:30] [PACMAN] starting full system upgrade
[2014-02-24 20:13] [PACMAN] Running 'pacman -Suy'
[2014-02-24 20:13] [PACMAN] synchronizing package lists
[2014-02-24 20:13] [PACMAN] starting full system upgrade
[2014-02-24 21:31] [PACMAN] Running 'pacman -Suy'
[2014-02-24 21:31] [PACMAN] synchronizing package lists
[2014-02-24 21:31] [PACMAN] starting full system upgrade
[2014-02-24 21:53] [PACMAN] Running 'pacman -Suy'
[2014-02-24 21:53] [PACMAN] synchronizing package lists
[2014-02-24 21:53] [PACMAN] starting full system upgrade
[2014-02-24 22:38] [PACMAN] Running 'pacman -R networkmanager'
[2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet'
[2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control'
[2014-02-24 22:39] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals'
[2014-02-24 22:40] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals skype4empathy telepathy-kde-accounts-kcm telepathy-kde-approver telepathy-kde-auth-handler telepathy-kde-contact-list telepathy-kde-contact-runner telepathy-kde-desktop-applets telepathy-kde-filetransfer-handler telepathy-kde-integration-module'
[2014-02-24 22:40] [PACMAN] Running 'pacman -R networkmanager-openvpn networkmanager-pptp networkmanager network-manager-applet kdeplasma-applets-networkmanagement telepathy-mission-control empathy telepathy-kde-common-internals skype4empathy telepathy-kde-accounts-kcm telepathy-kde-approver telepathy-kde-auth-handler telepathy-kde-contact-list telepathy-kde-contact-runner telepathy-kde-desktop-applets telepathy-kde-filetransfer-handler telepathy-kde-integration-module telepathy-kde-send-file telepathy-kde-text-ui'
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-text-ui (0.7.1-2)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-send-file (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-integration-module (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-filetransfer-handler (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-desktop-applets (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-contact-runner (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-auth-handler (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-approver (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-accounts-kcm (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-contact-list (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed skype4empathy (20110407-4)
[2014-02-24 22:40] [PACMAN] removed telepathy-kde-common-internals (0.7.1-1)
[2014-02-24 22:40] [PACMAN] removed empathy (3.10.3-1)
[2014-02-24 22:40] [PACMAN] removed telepathy-mission-control (5.16.0-1)
[2014-02-24 22:41] [PACMAN] removed kdeplasma-applets-networkmanagement (1:0.9.0.9-1)
[2014-02-24 22:41] [PACMAN] removed network-manager-applet (0.9.8.8-1)
[2014-02-24 22:41] [PACMAN] removed networkmanager-pptp (0.9.8.4-2)
[2014-02-24 22:41] [PACMAN] removed networkmanager-openvpn (0.9.8.4-1)
[2014-02-24 22:41] [ALPM] warning: /etc/NetworkManager/NetworkManager.conf saved as /etc/NetworkManager/NetworkManager.conf.pacsave
[2014-02-24 22:41] [PACMAN] removed networkmanager (0.9.8.8-3)
[2014-02-25 03:40] [PACMAN] Running 'pacman -Suy'
[2014-02-25 03:40] [PACMAN] synchronizing package lists
[2014-02-25 03:40] [PACMAN] starting full system upgrade
[2014-02-25 03:44] [PACMAN] upgraded youtube-dl (2014.02.22.1-1 -> 2014.02.24-1)
[2014-02-25 12:23] [PACMAN] Running 'pacman -Suy'
[2014-02-25 12:23] [PACMAN] synchronizing package lists
[2014-02-25 12:24] [PACMAN] starting full system upgrade
[2014-02-25 12:24] [PACMAN] upgraded dmenu (4.5-3 -> 4.5.13.5ed5e90-1)
[2014-02-25 12:24] [PACMAN] upgraded telepathy-glib (0.22.0-1 -> 0.22.1-1)
[2014-02-25 12:24] [PACMAN] upgraded tumbler (0.1.29-1 -> 0.1.30-1)
[2014-02-25 12:25] [PACMAN] upgraded youtube-dl (2014.02.24-1 -> 2014.02.25-1)
[2014-02-25 14:55] [PACMAN] Running 'pacman -Suy'
[2014-02-25 14:55] [PACMAN] synchronizing package lists
[2014-02-25 14:55] [PACMAN] starting full system upgrade
[2014-02-25 15:19] [PACMAN] upgraded ipython2 (1.1.0-1 -> 1.2.1-1)
[2014-02-25 15:19] [PACMAN] upgraded python2-pip (1.5.2-1 -> 1.5.4-1)
[2014-02-25 17:13] [PACMAN] Running 'pacman -Suy'
[2014-02-25 17:13] [PACMAN] synchronizing package lists
[2014-02-25 17:13] [PACMAN] starting full system upgrade
[2014-02-25 18:10] [PACMAN] Running 'pacman -Suy'
[2014-02-25 18:10] [PACMAN] synchronizing package lists
[2014-02-25 18:10] [PACMAN] starting full system upgrade
[2014-02-25 18:41] [PACMAN] Running 'pacman -S fbgrab'
[2014-02-25 18:41] [PACMAN] installed fbgrab (1.0-7)
[2014-02-26 13:19] [PACMAN] Running 'pacman -Suy'
[2014-02-26 13:19] [PACMAN] synchronizing package lists
[2014-02-26 13:19] [PACMAN] starting full system upgrade
[2014-02-26 13:25] [PACMAN] upgraded libmariadbclient (5.5.35-1 -> 5.5.36-1)
[2014-02-26 13:25] [PACMAN] upgraded mariadb-clients (5.5.35-1 -> 5.5.36-1)
[2014-02-26 13:25] [PACMAN] upgraded mariadb (5.5.35-1 -> 5.5.36-1)
[2014-02-26 13:25] [PACMAN] upgraded python2 (2.7.6-2 -> 2.7.6-3)
[2014-02-26 13:25] [PACMAN] upgraded s-nail (14.6-1 -> 14.6.1-1)
[2014-02-26 13:26] [PACMAN] upgraded xbmc (12.3-9 -> 12.3-10)
[2014-02-26 16:00] [PACMAN] Running '/usr/bin/pacman -S --asdeps qt>=4.6'
[2014-02-26 16:02] [PACMAN] Running '/usr/bin/pacman -S --asdeps qt>=4.6'
[2014-02-26 16:42] [PACMAN] Running 'pacman -Suy'
[2014-02-26 16:42] [PACMAN] synchronizing package lists
[2014-02-26 16:42] [PACMAN] starting full system upgrade
[2014-02-26 17:25] [PACMAN] Running 'pacman -Suy'
[2014-02-26 17:25] [PACMAN] synchronizing package lists
[2014-02-26 17:25] [PACMAN] starting full system upgrade
[2014-02-26 17:25] [PACMAN] upgraded libaccounts-glib (1.15-1 -> 1.16-1)
[2014-02-26 17:25] [PACMAN] upgraded libaccounts-qt (1.10-1 -> 1.11-1)
[2014-02-26 17:52] [PACMAN] Running 'pacman -Suy'
[2014-02-26 17:52] [PACMAN] synchronizing package lists
[2014-02-26 17:52] [PACMAN] starting full system upgrade
[2014-02-26 17:53] [PACMAN] upgraded signon (8.55-1 -> 8.56-1)
[2014-02-26 18:08] [PACMAN] Running 'pacman -Suy'
[2014-02-26 18:08] [PACMAN] synchronizing package lists
[2014-02-26 18:08] [PACMAN] starting full system upgrade
[2014-02-26 21:52] [PACMAN] Running 'pacman -Suy'
[2014-02-26 21:52] [PACMAN] synchronizing package lists
[2014-02-26 21:52] [PACMAN] starting full system upgrade
[2014-02-26 22:08] [PACMAN] upgraded grep (2.16-1 -> 2.18-1)
[2014-02-26 22:41] [PACMAN] Running 'pacman -S xchat'
[2014-02-26 22:41] [PACMAN] installed xchat (2.8.8-13)
[2014-02-27 00:02] [PACMAN] Running 'pacman -Suy'
[2014-02-27 00:02] [PACMAN] synchronizing package lists
[2014-02-27 00:02] [PACMAN] starting full system upgrade
[2014-02-27 01:41] [PACMAN] Running 'pacman -Suy'
[2014-02-27 01:41] [PACMAN] synchronizing package lists
[2014-02-27 01:41] [PACMAN] starting full system upgrade
[2014-02-27 12:20] [PACMAN] Running 'pacman -Suy'
[2014-02-27 12:20] [PACMAN] synchronizing package lists
[2014-02-27 12:20] [PACMAN] starting full system upgrade
[2014-02-27 12:26] [PACMAN] upgraded net-snmp (5.7.2-8 -> 5.7.2.1-1)
[2014-02-27 12:26] [PACMAN] upgraded youtube-dl (2014.02.25-1 -> 2014.02.26-1)
[2014-02-27 16:01] [PACMAN] Running 'pacman -Suy'
[2014-02-27 16:01] [PACMAN] synchronizing package lists
[2014-02-27 16:01] [PACMAN] starting full system upgrade
[2014-02-27 16:05] [PACMAN] upgraded wpa_supplicant (2.0-4 -> 2.1-3)
[2014-02-27 19:58] [PACMAN] Running 'pacman -Suy'
[2014-02-27 19:58] [PACMAN] synchronizing package lists
[2014-02-27 19:58] [PACMAN] starting full system upgrade
[2014-02-27 20:00] [PACMAN] Running 'pacman -S terminus'
[2014-02-27 20:00] [PACMAN] Running 'pacman -S terminus-font'
[2014-02-27 20:01] [PACMAN] installed terminus-font (4.38-4)
[2014-02-27 21:04] [PACMAN] Running 'pacman -Suy'
[2014-02-27 21:04] [PACMAN] synchronizing package lists
[2014-02-27 21:04] [PACMAN] starting full system upgrade
[2014-02-27 22:51] [PACMAN] Running 'pacman -Suy'
[2014-02-27 22:51] [PACMAN] synchronizing package lists
[2014-02-27 22:51] [PACMAN] starting full system upgrade
[2014-02-28 12:09] [PACMAN] Running 'pacman -Suy'
[2014-02-28 12:09] [PACMAN] synchronizing package lists
[2014-02-28 12:09] [PACMAN] starting full system upgrade
[2014-02-28 16:51] [PACMAN] Running 'pacman -Suy'
[2014-02-28 16:51] [PACMAN] synchronizing package lists
[2014-02-28 16:52] [PACMAN] starting full system upgrade
[2014-03-01 12:10] [PACMAN] Running 'pacman -S bluez'
[2014-03-01 12:19] [PACMAN] Running 'pacman -S xf86-input-joystick linuxconsole'
[2014-03-01 12:20] [PACMAN] installed xf86-input-joystick (1.6.2-3)
[2014-03-01 12:20] [PACMAN] installed linuxconsole (1.4.6-1)
[2014-03-01 12:21] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/rejoystick/rejoystick-0.8.1-3-i686.pkg.tar.xz'
[2014-03-01 12:21] [PACMAN] installed rejoystick (0.8.1-3)
[2014-03-01 12:22] [PACMAN] Running '/usr/bin/pacman -U /home/joaowojcikiewicz/z-aur/joystick/joystick-20051019-12-i686.pkg.tar.xz'
[2014-03-01 12:48] [PACMAN] Running 'pacman -Suy'
[2014-03-01 12:48] [PACMAN] synchronizing package lists
[2014-03-01 12:48] [PACMAN] starting full system upgrade
[2014-03-01 12:49] [PACMAN] upgraded glibc (2.19-2 -> 2.19-3)
[2014-03-01 12:49] [PACMAN] upgraded device-mapper (2.02.105-1 -> 2.02.105-2)
[2014-03-01 12:49] [PACMAN] upgraded cryptsetup (1.6.3-2 -> 1.6.4-1)
[2014-03-01 12:49] [PACMAN] upgraded feh (2.9.3-1 -> 2.10-1)
[2014-03-01 12:49] [PACMAN] upgraded libtirpc (0.2.3-2 -> 0.2.4-1)
[2014-03-01 12:49] [PACMAN] upgraded readline (6.2.004-2 -> 6.3-1)
[2014-03-01 12:49] [PACMAN] upgraded lvm2 (2.02.105-1 -> 2.02.105-2)
[2014-03-01 12:49] [PACMAN] upgraded ppp (2.4.6-1 -> 2.4.6-2

Lost 5 GHz wireless network access after upgrading to Windows 10

Hello, Lost the ability to connect to (and see) my 5GHz wireless network after upgrading Windows 8.1 to Windows 10 on my Yoga 2 13. I have tried to update the wireless driver to the latest version. The WiFi card is the original Wireless-N 7260 that was installed when I bought the computer. I know for a fact that I was able to use 5GHz networks Before as I can see my saved networks and I can clearly see that I have my 5GHz network in that list. Please advice, Patrik

Good to see it fixed itself. One setting that can block Windows 10 from seeing the WD My Cloud and other devices/computers on the network is the "network location type". During the upgrade or install to Windows 10 one may not quite understand what they are reading when, or if, asked which kind of network they are connecting to. If they select "no" on that particular screen (example below), Windows 10 will block access to certain local devices possibly including the WD My Cloud. The following link gives a general overview of the issue and ways to fix it if one made the wrong selection: Change network location type (Public or Private) in Windows 10

Open udp port on Wireless Network

I have a WLC2106 with 6 APs model 1240AG. An application uses port 11050 UDP for license management. The client send a broadcast on this port looking by the server, because this information is NOT passing through, the connection can't be established. With the original network (3com), there is no any problem but with Cisco network, this particular port appears to be closed. How can I confirm the AP is blocking this port? How can I open it? I tried with an ACL but the problem was not fixed.
thanks in advance.

Eric:
Thanks so much for your support. Finally I have the application working.
I found the problem was not with the UDP port alone, the problem was with all broadcast (your tips give me ligth).
Besides the "Broadcasting Forwarding" option I changed the "Ethernet Multicast Mode" to Multicast.
The key was this paragraph in the release notes:
Re-enable Broadcast after Upgrading to Release 4.0.206.0
In software releases 4.0.179.0 and earlier, broadcast and multicast forwarding were both controlled with a single global flag that enabled multicast. Beginning with software release 4.0.206.0, these functions were broken into separate configuration flags: one that controls broadcast and one that controls non-broadcast multicast. If you have multicast enabled in software releases 4.0.179.0 and earlier, the broadcast flag is left disabled after upgrading to software release 4.0.206.0. As a result, some applications that rely on broadcast do not work after the upgrade.
After you upgrade to software release 4.0.206.0, use this CLI command to re-enable broadcast:
config network broadcast enable
When re-enabled, broadcast uses the multicast mode configured on the controller.
To be honest I am not very clear how the multicast mode is related with the problem, but now I can see all the broadcast messages passing through wireless network.
Thanks a lot
Daniel Escalante.

Blocking a particular wireless network?

Similar Messages

Maybe you are looking for