Blocking doesn't work

I tried the new ios 7 blocking feature on my iPhone 4S and the number still calls through. It was a landline number

Hi Jpbwilson83,
Welcome to the Support Communities!
The article below may be able to help you with this issue.
Click on the link to see more details and screenshots.
iOS 7: Understanding call and message blocking
http://support.apple.com/kb/HT5845
Does the phone number appear in the blocked list?
- Judy

Similar Messages

I seem to have multiple problems related or unrelated. I cannot use Apple Mail for blueyonder and mostly for gmail as both show that the server is off line. My pop up blocker doesn't work and I am blitzed with pop up windows on nearly every command

Firstly I am unable to use Apple mail except for hotmail, for blueyonder, gmail or Sky as the server shows as (off line) and I have no idea how to get them on line even though I tell them to go there.
My pop up blocker doesn't work and I am blitzed with advertising windows virtually on ever command I make, one seems to be impossible to unsubscribe from.
When I am in an email with a web link the web link doesn't work and I get a window saying that I must have a pop up blocker, but if I switch it off it is no different, what does work is switching the "enable Java script off", then when I get to the web site I can't use it until I switch the java script back on.
I can't do a screen shot either full or partial, when I try it changes the web site that is on screen to another.
So what have I done that might have caused problems, downloading Yosemite seemed to be the start of the problems. Since then I have started to install Mackeeper, after checking with a family members who should know, that MacPaw is safe. I decided that I didn't want to pay the subscription, so went through the uninstall instructions but it comes up as a pop up with considerable regularity.
My stress levels have gone through the roof with pop ups happening so regularly and not being able to use Apple mail.o can anyone help please?
S

Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

URL blocking doesn't work on E4200

I have the 1.0.03 firmware installed and URL blocking doesn't work. I assigned the policy to the entire address range and could still access the web site I wanted to block.

What website? https or http?
You can't block https...

CUSTOM ROW FETCH USING PLSQL BLOCK DOESN'T WORK

Hello,
I'm using Apex 3.0, and I'm trying to use a anonymous block to populate page items instead of automatic row fetch. Apparently the block works fine but the page doesn't display the items with the values that I fetched.
I'm using something like:
Declare
v_test varchar2(10);
begin
select name into v_test from emp where emp_no=:p10_id;
:p10_name:=v_test;
end;
Does anyone have a clue ? The process is defined to run on "OnLoad - After header", but I've tried other options, but the results are the same: P10_name appears blank.
thank you for your help
JAV

But there is a catch.....on the item definition, the "SOURCE USED" must be set to "Only when current value in session is null", otherwise, it doesn't show what you want.
Cheers
JAV

Call blocking doesn't work

      I keep getting phone calls from {edited for privacy} the caller ID says Washington. They claim to be a pharmacy trying to sell Viagra and pain medications. I get between 2 to 4 calls per day and told them on numerous times.
      I added the number to my digital call blocking account and the calls still come thru. I contacted Verizon support and their answer was that the call blocking feature doesn't block long distance calls!!!! What kind of B.S. answer is that???
      If Verizon is going to offer a service than it should work, regardless if the call is local or long distance. If it'll only work for local calls than these digital FIOS features are WORTHLESS,,

Did you place your number on the Federal Do Not Call list?   If so, file a case and make some money off them.    If not, what are you waiting for?    You did not state if the incoming number was actually a domestic phone number or from an area code / country code outside of the United States.
Additionally, next time they call, note the exact day and time, ask for the call back number, company name,the operator's name or identification number, and then very specifically state "I do not wish to receive these calls from your company. Place me immediately on your DO NOT CALL list and do not call again. Future calls will be referred to the appropriate authorities for legal action.   Do you understand and acknowledge receipt of this directive?"
After that, keep good records and file a complaint as appropriate.

Why my scroll bar of a data block doesn't work?

Hi,
I have a data block that displays a maximum of 9 records at one time. When the query returns more than 9 records i want to use a vertical scroll bar to navigate to the last records.
In some forms it works fine but in others not , i still didn't find why ??
Cheers,
Nuno

Nuno,
Rather than trying to find a needle in a hay stack, I would recommend taking a step backward. This will help to rule out whether the issue is something you caused or if there is an issue with the environment or product.
Create a new module in the Builder. Do not add any of your own code.
In the Builder, connect to a database (File > Connect).
From the Builder menu, select Tools > Data Block Wizard
In the Wizard first screen (after Welcome), select Table or View then click Next
On the next screen, click on Browse to display the tables available to you. Choose one.
All the columns in that table should appear on the left. Click on the double arrow (>>) to select all of them. Then click on Next
Click on Next again
Choose the option to create the data block then open the Layout Wizard. Then click Finish
In the Layout Wizard, click on Next (after the Welcome scree) to choose the default Canvas. Then click on Next
Click on the double arrow (>>) to choose all columns. Then click Next
Click Next again.
Choose Tabular as the layout style. Click on Next
Change Records Displayed to 4 and check the box labeled "Display scroll bar".
Click on Finish
Again, do not make any changes to anything in this form. Run it. Does it reproduce the same problem you experience in your previous form? If this form works correctly, likely the issue is in the design of your other form. If this test form fails in the same manner then you are either exposing a defect or there is an odd configuration issue.

Pop up blocker doesn't work

Since upgrading to 10.7 the safari pop-up blocker no longer blocks pop ups!
I've run software update regularly and obviously checked that pop-up blocker is checked in the security preferences.
What is wrong?
The most common pop up is googleads.g.doubleclick.net.... and it pops up as frequently as once per minute as a new (active) tab. Twice in the time it's taken me to write this question!!
Please help as applecare doesn't seem to be valid for expresslane in Sweden.

I had a similar problem on unsafe web sites with Safari...The google AdSense is not so pop up proof as it seams.
The best thing is to use another navigator as Opera which really blocks the pop ups on nearly all the web sites.
I keep using safari for its reader option that i suppose will soon be on Firefox as it's the best that new Safari has for a long time ago!

Servlet init block doesn't work with getServletContext().getRequestDispat..

Hi Everyone,
I am getting null pointer exception when i have coded init method inside my servlet(inside that i am fetching init parameter passed from web,xml file) and while getting requestdispatcher from context.
if i get requestdispatcher from request then it works fine. i dont understand reason behind this behaviour.
please give your valueable comment.
find code below:
public void init(ServletConfig config) throws ServletException
enum1 = config.getInitParameterNames();
while(enum1.hasMoreElements()){
init_paramNm = (String)enum1.nextElement();
init_paramVal = config.getInitParameter(init_paramNm);
System.out.println("Name = "init_paramNm" and value = "+init_paramVal);
getting null pointer exception with this
RequestDispatcher rd = getServletContext().getRequestDispatcher("/ObjJSPtoServlet.jsp");
rd.forward(request, response);
work fine with
RequestDispatcher rd = request.getRequestDispatcher("/ObjJSPtoServlet.jsp");
rd.forward(request, response);

public void init(ServletConfig config)
throws ServletException
Called by the servlet container to indicate to a servlet that the servlet is being placed into service. See Servlet.init(javax.servlet.ServletConfig).
This implementation stores the ServletConfig object it receives from the servlet container for later use. When overriding this form of the method, call super.init(config). ...
[More Info|http://java.sun.com/j2ee/sdk_1.3/techdocs/api/javax/servlet/GenericServlet.html#init%28javax.servlet.ServletConfig%29]

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

I've gotten 60 or 70 messages that that my iCloud doesn't work and to select preferences. The message says I will get an email to verify but I never get an email. I've checked old email, blocked email, and have low filters on emails. Any ideas?

've gotten 60 or 70 messages that that my iCloud doesn't work and to select preferences. The message says I will get an email to verify but I never get an email. I've checked old email, blocked email, and have low filters on emails. Any ideas?

Hey CarolinQc,
Thanks for the question. The symptoms you are experiencing can result from an Apple ID address that has been changed prior to signing out of all of the services. Before you change the email address associated with your Apple ID, you’ll want to sign out of all services to avoid this. As a fix, you can temporarily change your Apple ID back to the old address:
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/TS5223
Change your Apple ID temporarily
If signing out and back in to iMessage or FaceTime didn't help, try these steps:
1. Change your Apple ID to the Apple ID you used previously. You shouldn't need to verify the email address.
2. Go to Settings > iCloud. Complete these steps only if the Find My [Device] setting is turned on:
          - Scroll down and tap Delete Account, then tap Delete to confirm.
          - Tap “Keep on My [Device]” or “Delete from My [Device].” In either case, your data remains in iCloud and will be updated on your device when you sign in to iCloud again.
          - Enter the password for your previous Apple ID.
3. Change your Apple ID to the new email address that you want to use. You'll need to verify the email address.
4. Return to Settings > iCloud and sign in with your new Apple ID.
Additional Information:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Thanks,
Matt M.

My iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work.

my iphone keeps blocking in a "boot" mode... blackscreen with apple logo... the restarting (home and power button for 10 sec) doesn't work. when i get it in DFU mode and try restoring with itunes it remains the same... provider already "fixed" this problem twice with a "software update" only to get the same problem again... it just "reboots" this time it happened @ night while charging... previous time in my jacket pocket... this is the 3th time it happens, and my provider (Mobistar belgium) doesn't wish to exchange or refund my iphone witch clearly has something wrong 3 times same problem in 3 months...

imanfromsweden wrote:
Please apple support do you people have a convincing answer for us? Is there a solution? My phone is only 2 years old and was (2 hours ago), in top condition!!
Please help....
On belhalf of my fellow volunteers, the answer is, "We'll try our best."
My advice is to try not to treat this like it is a paid service provided by compensated professionals. Ask nicely and one of the nice folks here might take some time out of their weekend to offer advice.

How do I disable those pesky "hover-over" pop ups? I tried the method of right clicking on them and opting out, but it doesn't work. If you guys could add some kind of blocker to your browser, it would be a huge plus!

# Question
How do I disable those pesky "hover-over" pop ups? I tried the method of right clicking on them and opting out, but it doesn't work. If you guys could add some kind of blocker to your browser, it would be a huge plus!

Chris CA wrote:
Did you createa smart playlist? It's purple with a gear icon.
And you set the criteria to
Match rule:
Date added is in the last two weeks?
I tried it, but couldn't get it to work. I think I had trouble with the Rule. I put a Rule in as follows: Data added in the last five hours? I added music (data) but nothing appeared in my Smart Playlist. Oh yes - I named the playlist: Recently Added.
What did I do wrong? Is it necessary to have a question mark at the end of the Rule? I couldn't find anything on how to create a Smart Playlist in Help. There is stuff in there, but it does not go into much detail, i.e., nothing on the proper wording of the Rule.

My daughter blocked her ipad and it doesn't work. What i can do to unlock it?

my daughter blocked her ipad and it doesn't work. What can I do to unlock it?

You have double post. Check your other post for the answer.

SetSoTimeout for blocking SocketChannel.read() doesn't work

When I tried to perform reading in blocking mode with using NIO's SocketChannel.read() method with a desired timeout, the SocketChannel.socket().setSoTimeout() method that was called before SocketChannel().read() funtion, seemed not to work properly. The read() method blocked the thread for infinite time even if I set the timeout to any non-zero value (zero means according the manual infinite timeout).
Here is the example code:
SocketChannel iochan;
ByteBuffer bb = new ByteBuffer.allocateDirect(1024);
iochan = SocketChannel.open(new InetSocketAddress(some address, some port));
iochan.socket().setSoTimeout(2000); //should wait max. 2 secs on next read
iochan.read(bb); //read some data to the buffer; if none present within 2 seconds then exception should be thrown - but it never happens. The thread is blocked until some data comes or the connection is closed by the peer, for example.
What is very interesting is that this code is OK:
SocketChannel iochan;
ByteBuffer bb = new ByteBuffer.allocateDirect(1024);
iochan = SocketChannel.open(new InetSocketAddress(some address, some port));
iochan.socket().setSoTimeout(2000); //should wait max. 2 secs on next read
iochan.socket.getInputStream().read(); //read byte; if none present within 2 seconds then exception should be thrown - this works fine.
As you see the same socket is used. Nonetheless, I would like to use SocketChannel methods (NIO). Can anyone help me? Why doesn't work timeouts for blocking SocketChannel methods(read(),...), whereas "classic" sockets methods are OK?
I'm using W2K SP3, Java 1.4.1_01.

I've run into a similar problem using DatagramSockets. Apparently socket timeouts aren't supported using the nio packages, but nowhere in the documentation is this mentioned. The following bug report gives more info:
http://developer.java.sun.com/developer/bugParade/bugs/4614802.html
Apparently this is not considered a bug. I do however hope this is fixed in JDK 1.5, when I understand more work is to be done on nio.
Rob

My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID. I have tried to copy and paste in the browser window, but that doesn't work either.

My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID. I have tried to copy and paste in the browser window, but that doesn't work either.

Have you tried accessing the email from another computer, device, email client or web browser?

Blocking doesn't work

Similar Messages

Maybe you are looking for