Blocking messages in Queue

Hi All,
We have two different interfaces for different projects . If we get any error for first interface it will block
all the messages in the Queue of other interfaces. I unlocked a week back using SMQ2 but again the same problem today.
Any idea to outcome of thise issue .
Thanks....

Hi,
This is bound to happen, if messages are stuck in one queue then all other messages in sequence of the same queue will get blocked and unless you clear the queues, they won't be processed.
You can use EOIO(Exactly once in order) service for the interface for which messages are failing.
Here you have to mention the queue name for this particular interface, so that all the messages of it will take the same queue.
And all other messages of other interface will take different queue and will get processed.
-Supriya.

Similar Messages

Messages are blocked in XI QUEUES

hi experts
my scenario flow is r/3 ---> Xi -
> again same R/3
data is going to XI automatically and in also from XI inbound QUeue
but the problem is that it is showing Green flag
if we relase the msgs maually from the queues then it showing Single black arrow in place of green flag
if release from here by doing the same thing in queues then it going the R/3 and doing further in R/3
so i want to know why the messages are getting blocked in queues
plz help me its urgent
points should be rewarded
thanks
sreeni

Hi
Please refer the below weblog.
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i
Also this thread
Message and queue
Check this sravyas blogs with some simple examples:
/people/sravya.talanki2/blog/2005/08/16/message-mapping-simplified--part-i
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Also check this:
/people/riyaz.sayyad/blog/2006/04/23/introduction-to-context-handling-in-message-mapping
Queues for Prioritized Message Processing:
http://help.sap.com/saphelp_nw04s/helpdata/en/04/827440c36ed562e10000000a155106/frameset.htm
Configuring Queue Assignment for Inbound Processing:
http://help.sap.com/saphelp_nw04s/helpdata/en/45/1a97be109921a0e10000000a1553f6/frameset.htm
1) http://www.erpgenie.com/sap/netweaver/xi/howto.htm
in the above link look for
How to Prioritize Exchange Infrastructure (XI) Messages on the Integration Server
2) http://help.sap.com/saphelp_nw04/helpdata/en/04/827440c36ed562e10000000a155106/frameset.htm
3) Re: AE and IE /Que
4) http://www.sapag.co.in/sapbasis.htm
Thanks!!

How to block on MQ queue with MQControl

I'm using WL 8.1SP4.
I'm trying to use the com.bea.control.MQControl class. It seems like there is no way to "block" on a queue with this. It appears that the various "getMessageAs..." methods will just throw a ResourceException if there is no message on the queue. Failing a blocking capability, I have to implement a complicated wait/retry loop so the app doesn't spin waiting for a message.
Alternatively, if my jpd has a Subscription node for the queue, if I get to that node, does that mean that there is definitely a message on the queue at that point? It would be ok if I could execute the process only when there is a message on the queue, and I could restart it each time.

I figured out how to do this. The MQMDHeaders instance, which gets passed to the "getMessageAsString()" method, has a "waitInterval" property, which when set to "-1", will wait forever.
What I'm not sure about, however, is whether it's valid to block for resources inside a JPD.

T-code for display open PR with block message/ indicator

Hi experts,
I would like to export the open PR list with block message / indicator to excel.
Could you please tell me the T-code and the steps?
Thank you.

Dear,
And also try tran: SE16 table EBAN and with the field STATU you can check the open PRs.
Block - in the sense 1) Mark like item with deletion so that further documents cannot be created.
2) PR item not yet released.
Blocking also be considered marking item as Closed [MEREQ3321-EBAKZ].
Your requirement differs the selection of table to be selected get data. Please check.
Regards,
Syed Hussain.

Issue while posting message to queue

Hi ,
I am getting following exception while posting message into queue.For every new build I am getting this exception and after 2 or 3 times of restart of corresponding OBPM related weblogic server,Issue is getting resolved
A component failed while executing activity '/COM/OU/UserlProcess#Default-3.0/ComponentExecution[PreProcessor]' (BP-method preProcessor) over instance '/COM/OU/UserlProcess#Default-3.0/15141/0'.
Details:
The task could not be successfully executed.
Reason: 'fuego.connector.ConnectorException: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Caused by: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Caused by: Connector [MAIN_Q:null:JMS] returned the wrong class [com.tibco.tibjms.naming.TibjmsConnectionFactoryAttributes] for a resource of type [2].
Detail:Connector [MAIN_Q:null:JMS] returned the wrong class [com.tibco.tibjms.naming.TibjmsConnectionFactoryAttributes] for a resource of type [2].
fuego.lang.ComponentExecutionException: The task could not be successfully executed.
Reason: 'fuego.connector.ConnectorException: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
     at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:1091)
     at fuego.server.execution.EngineExecutionContext.runCil(EngineExecutionContext.java:1277)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.runCil(ComponentExecutionMicroActivity.java:126)
     at fuego.server.execution.microactivity.ComponentExecutionMicroActivity.execute(ComponentExecutionMicroActivity.java:84)
     at fuego.server.execution.microactivity.MicroActivityEngineExecutionHandler.executeActivity(MicroActivityEngineExecutionHandler.java:57)
     at fuego.server.execution.ImmediateActivity.execute(ImmediateActivity.java:42)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startNestedTransaction(TransactionAction.java:527)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:548)
at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.DefaultEngineExecution.executeAutomaticWork(DefaultEngineExecution.java:62)
     at fuego.server.execution.EngineExecution.executeAutomaticWork(EngineExecution.java:42)
     at fuego.server.execution.ToDoItem.executeAutomaticWork(ToDoItem.java:251)
     at fuego.ejbengine.ItemExecutionBean$1.execute(ItemExecutionBean.java:217)
     at fuego.server.execution.DefaultEngineExecution$AtomicExecutionTA.runTransaction(DefaultEngineExecution.java:304)
     at fuego.transaction.TransactionAction.startBaseTransaction(TransactionAction.java:470)
     at fuego.transaction.TransactionAction.startTransaction(TransactionAction.java:551)
     at fuego.transaction.TransactionAction.start(TransactionAction.java:212)
     at fuego.server.execution.DefaultEngineExecution.executeImmediate(DefaultEngineExecution.java:123)
     at fuego.server.execution.EngineExecution.executeImmediate(EngineExecution.java:66)
     at fuego.ejbengine.ItemExecutionBean.processMessage(ItemExecutionBean.java:203)
     at fuego.ejbengine.ItemExecutionBean.onMessage(ItemExecutionBean.java:115)
     at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
     at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
     at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
     at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4123)
     at weblogic.jms.client.JMSSession.execute(JMSSession.java:4013)
     at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:4541)
     at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:464)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:200)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:172)
Caused by: fuego.connector.ConnectorException: Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
Detail:Connector [MAIN_Q:null:JMS] caused an exception when getting a resource of type [7].
at fuego.connector.ConnectorException.exceptionOnGetResource(ConnectorException.java:95)
     at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:324)
     at fuego.connector.ConnectorTransaction.getResource(ConnectorTransaction.java:298)
     at fuego.connector.JMSHelper.getSession(JMSHelper.java:75)
     at fuegoblock.msg.DynamicJMS.sendMessage(DynamicJMS.java:145)
     at xobject.Utility.JMSService.writeToAppQueue(JMSService.xcdl:11)
     at xobject.Utility.Notification.sendAuditNotification(Notification.xcdl:19)
     at XXX.ManualProcess.Default_3_0.Instance.CIL_preProcessor(Instance.xcdl:20)
     at XXX.ManualProcess.Default_3_0.Instance.CIL_preProcessor(Instance.xcdl)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:585)
     at fuego.server.execution.EngineExecutionContext.invokeMethodAsCil(EngineExecutionContext.java:1082)
     ... 31 more
Please help how can I resolve this issue
Thanks
Sailendra

I am also getting the same issue. Sailendra, did you resolve the issue?
If not could anyone help us to resolve this issue.
I am using Tibco JMS for queue and I have set 'ConnectionFactory' as Connection Factory Lookup Name value in the external resourse.
Thanks in advance.
Regards,
Ramanan

Even when I add a Trusted File location, I still recieve the Allow / Block message?

We use the "Protected Mode at startup" with Acrobat Reader 10.x and when we added trusted location, then the allow / block message disappears. Sadly, with Acrobat 11.x even after add the folder locations to the Trusted list, the PDF file still ask "Allow / Block"
Is there anything else I need to do with 11.x to make the message fo away, without turning off Protected Mode?
Cheers
J

Can you please elaborate your workflow and error more?
Like what file you are trying to access and the location etc.
Also, please try latest Adobe Acrobat Reader DC now.
Thanks,
Shakti K

NOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

CANNOT PRINTING FROM WINDOWS 7 TO MY PHOTOSMART c7180 ALL-IN-ONE (I CAN SEE MESSAGES IN QUEUE)?

Hi,
I think you need to remove the queue. Please try:
    hold down the Windows key and press R.
    from the Run window, type services.msc and hit enter.
    if the machine asks for Admin you have to accept this,
    look down to the print spooler service, right click it and select properties
    click on the Stop button,
    browse to C:\Windows\System32\Spool\printers
    delete the job inside this folder
    reboot the machine
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Configure Monitoring of a MSMQ private queue Messages in Queue counter

Hi
I have a workgroup server that is not part of my local domain.
I have contented the server to my local SCOM 2012 R2 server and it is working fine.
My SCOM server has MSMQ 6.0 & 6.3 MP's installed.
On the remote servers I have some MSMQ 6.0 private queues.
When I am trying to monitor one counter in 1 queue , when the threshold is reached I am getting error message on al the queues.
On the performance counter tab I have :
Object: MSMQ Queue
Counter : Messages In Queue
Instance :[server name'\private$\error
There were 1207 messages in this queue .
I Got about 30 messages and error on all queues.
What did I do wrong ?
Itamar
Itamar

Hi
This is the alert email I got :
Alert: Notification Queue
Source: maasw1\private$\maas.backend.scheduler.timeoutsdispatcher
Path: MAASW1.xxx.com
Last modified by: System
Last modified time: 2/18/2014 2:45:49 PM Alert description: Instance Computer Queues
Object MSMQ Queue
Counter Messages in Queue
Has a value 19
At time 2014-02-18T14:45:35.0000000+02:00
I did not place a monitor on this queue but on 2 other queues.
one with threshold of 500 and on with 1 .
I have made some change in the monitor and will test it now.
Thanks
Itamar
Itamar

Get information about Subscribed Consumer and messages in queue

Hi,
I use a library that allow to set a set of consumers. They read messages I send. I check if the consumers are subscribed through "Open Message Queue Administration Console". Through Broker->Destinations I found the consumer under the correct destination I find the consumers with the message in queue, state and other information. I would like to obtain these information programmatically.
Could someone link me an example?
Thanks, bye bye.

Hi,
I'm reading the page but I cannot find the jar file that contains this package:
import com.sun.messaging.jms.management.server
and the classes:
-MQObjectName
-DestinationAttributes
-DestinationType
What is the jar file for the class above?
Moreover, I cannot find the class:com/sun/messaging/jmq/management/JMXMQAddress
when I try to use the code I wrote I receive this error:
>
java.lang.NoClassDefFoundError: com/sun/messaging/jmq/management/JMXMQAddress
     at com.sun.messaging.AdminConnectionFactory.getJMXServiceURL(AdminConnectionFactory.java:257)
     at com.sun.messaging.AdminConnectionFactory.createConnection(AdminConnectionFactory.java:207)
     at testcase.eventManager.DPCTRMSEVENTMANAGER.message(DPCTRMSEVENTMANAGER.java:123)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.junit.internal.runners.TestMethodRunner.executeMethodBody(TestMethodRunner.java:99)
     at org.junit.internal.runners.TestMethodRunner.runUnprotected(TestMethodRunner.java:81)
     at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34)
     at org.junit.internal.runners.TestMethodRunner.runMethod(TestMethodRunner.java:75)
     at org.junit.internal.runners.TestMethodRunner.run(TestMethodRunner.java:45)
     at org.junit.internal.runners.TestClassMethodsRunner.invokeTestMethod(TestClassMethodsRunner.java:66)
     at org.junit.internal.runners.TestClassMethodsRunner.run(TestClassMethodsRunner.java:35)
     at org.junit.internal.runners.TestClassRunner$1.runUnprotected(TestClassRunner.java:42)
     at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34)
     at org.junit.internal.runners.TestClassRunner.run(TestClassRunner.java:52)
     at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:45)
     at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386)
     at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)
Caused by: java.lang.ClassNotFoundException: com.sun.messaging.jmq.management.JMXMQAddress
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:307)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:301)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:252)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:320)
     ... 23 more
Where can I found this class?
Thanks, bye bye.
Edited by: PiotreUgrumov on May 13, 2010 8:29 AM

Net.Msmq Binding Not Picking Up Messages in Queue as soon as the application pool gets recycled

Hi,
We are trying to implement a wcf service that exposes a net.msmq endpoint. We are running windows server 2008 R2/IIS 7.5 running on a DOMAIN mode.
1. Our service is called service.svc and it is deployed under an application called Test in the default website (application pool running under network service)
2. The url to reach the service webpage is http://machinename/Test/service.svc.
3. We created a private queue called Test/service.svc and we configured permissions for network service to full control.
Now, when the application pool is "alive" the service picks up the messages correctly, but as soon as the application pool gets recycled (because of timeout or any other reason), the service stops picking up the messages, that just sit in the queue until the service starts again by browsing to the service webpage (http://machinename/Test/service.svc)
I know this is a popular question, but I already tried several solutions with no luck (for example, we triedhttp://keithelder.net/blog/archive/2009/06/03/fix-for-wcf-netmsmqbinding-not-picking-up-messages-in-queue.aspx,http://www.codewrecks.com/blog/index.php/2009/03/17/hosting-a-wcf-service-based-on-msmq-in-iis7/,http://social.msdn.microsoft.com/Forums/en-US/wcf/thread/a1df55c4-e642-442a-9057-f0aec278d10c/ and other ones)
Any Help?
If this post is helpful, please mark it as such
Alessandro Cardoso
MVP | Microsoft Heroes | MCT
blog: http://itaustralia.spaces.live.com
http://cardosoalessandro.spaces.live.com

Hi Steven,
I am Alessandro's colleague, I am working with him on these net.msmq issues.
Our configuration includes a transactional queue called Test/Service.svc (unauthenticated,
we shut down all security for the moment...does it matter?) and these attributes on the service:
[ServiceContract]
public interface IService
[OperationContract(IsOneWay=true)]
void ProcessMyMessage(MyClass parameter);
[ServiceBehavior(InstanceContextMode = InstanceContextMode.PerCall, TransactionIsolationLevel = IsolationLevel.Serializable, TransactionTimeout = "00:03:00")]
public class Service: IService
[OperationBehavior(TransactionScopeRequired = true, TransactionAutoComplete = true)]
public void ProcessMyMessage(MyClass parameter)
//Do some stuff here
The service is hosted on IIS 7.5 under an application called Test (so that the full http address of the service is http://machine/Test/Service.svc).
In the configuration (for both client and service) we specified None for the security mode, "true" value in durable and exactlyOnce
The Net.msmq Listener Adapter windows service is running fine under the Network Service account (the same as our application pool)
Is there something we are missing?
Also, can you explain how a transaction not configured properly can create this behaviour? In my understanding the process of delivering a message happens in 3 steps (I remember a nice picture of this the Juval Lowy book):
1) Transaction 1: client delivers message to local instance of msmq. The transaction rolls back if the message does not get delivered.
2) Transaction 2: the local instance of msmq delivers the message to the remote (service) instance of msmq. The transaction rolls back if the message does not get delivered.
3) Transaction 3: wcf activates my service which picks up the message and process it. The transaction rolls back if the service fails to pick up the message or does not complete the transaction (for example, because of an unhandled exception).
The message gets delivered to the service machine successfully, so I am assuming that steps 1 and 2 are executed correctly. If my service was not configured to handle transaction properly, wcf should still activate it and do something with it. Or at least,
if it doesn't get activated at all, this should be the case even when the application pool is well alive and awake, because it should be a configuration problem. Instead, the service works great if the appPool is alive and it never gets activated when the
appPool is sleeping (absolute nothing in the .svclog trace file generated by the service). Am I saying something wrong?

Drop messages in queue that have a blank sender

I'm getting hundreds of messages in the Queue where the From Address is < >.
Do I just let these build up or is there a setting somewhere that would just drop the message if it has a blank sender?
Here is an example of one that I've received;
Identity: Pebbles\512\21474838371
Subject: Undeliverable: MUST READ: Vehicle's Below Kelly-Blue-Book*
Internet Message ID: <[email protected]>
From Address: <>
Status: Ready
Size (KB): 10
Message Source Name: DSN
Source IP: 255.255.255.255
SCL: -1
Date Received: 5/27/2014 11:51:09 AM
Expiration Time: 5/29/2014 11:51:09 AM
Last Error: 400 4.4.7 Message delayed
Queue ID: Pebbles\512
Recipients: [email protected];2;2;[{LRT=};{LED=400 4.4.7 Message delayed};{FQDN=};{IP=}];0;CN=outbound,CN=Connections,CN=Exchange Routing Group (DWBGZMFD01QNBJR),CN=Routing Groups,CN=Exchange Administrative Group (FYDIBOHF23SPDLT)....
1 email server in domain; Exchange 2013 sp1/Win2012 Standard
PennyM

On Exchange 2010 you have antispam agents that can help you discard such messages.
Sender filtering has a check box called drop messages with blank senders select that and restart the transport service on the servers to get that updated quickly.
In 2013 server, you have sender filtering as well.

Prosecced messages in queue

Hello!
Came across puzzle when do dequeue messages:
We want to dequeue all messages for particular consumer.
We do dequeue with no_wait, first_message, consumer_name.
It works all right.
All messages for specified consumer is dequeued.
Immediately querying view AQ$QUEUE_T_QUEUE_x - we can see that dequeued messages are in 'PROCESSED' status
and in 'READY' status in table QUEUE_T_QUEUE_x.
Wait some Time - query view/table again - and we dont see them any more in the queue.
Queue retention is set to 25 hours. So messages deleted from queue much more fast.
The main question is - what does the
Time between message is in 'PROCESSED' state after dequeue
and
time it disappears from queue
depend on?
We see different Time on different instances.
AQ_TM_PROCESSES=10
We guess that may be it's Queue Monitor that responsible for that?
Does anybody know what is going on and how to control it?
Any help is appreciated!
Thanks in advance!

Hi maha,
Yes, queue monitor has responsible for post-process of dequeued messages in queue table.
In 10gR2, Queue Monitor processes deqeueud messages every 30 seconds.
If queue retention time are already expired when a queue monitor checks qtable, then a Queue Monitor removes messages from qtable. Otherwise, Queue Monitor update "deq_time" column in qtable. (deq_timestamp column in view is differ from deq_time in qtable.)
However, I don't know why your messages are removed from qtables even though you set queue retention to 25 hours. And I have no idea to control Queue Monitor cycle, behavior, and so on,

JMS adapter transaction. Rollback message to queue.

Hi all !
A have question about jms adapter transaction. My composite application has 3 steps : JMS adapter (listener), mediator, WS adapter. JMS adapter listen queue push message to mediator, mediator invoke web service. If ws not available (server down), mediator try recovery 5 times. After 5 times, reject message from queue. I wont rollback message to queue. I saw examples with JMS + BPEL, but it not help me. Anybody can help me.

Hi,
You don’t need to catch a mediator fault – you can let it rollback to the JMS Queue and let the Queue do the retries.
To get the retries working, log in to the weblogic console and navigate to JMS Modules -> Your Module -> Your Queue -> Configuration -> Delivery Failure
Here you will find options for Redelivery Limit. Set this to the number of retries you need.
Then navigate to the connection factory you want and set the redelivery delay.
This should get your desired behaviour, but once the message has failed it will be discarded. If you prefer to put it on an error queue you can create an error queue, and in the original queue’s, goto Delivery Failure, change the expireation policy and set the Error Destination to be your error queue.
Hope that helps!
Robert

How to send message to Queue using JMS

Hai Friends,
I have written one program, which sends one seriablizable object to the queue. At
queuesender.send(objectmessage) statement
i am getting the following exception, but message is going to queue. The next statement is not executing. Next statements is simple debug statement.
i.e.,System.out.println("Message has been send");
why this is not working let me know plzz
HERE is EXception
<May 15, 2006 11:02:46 AM IST> <Alert> <JMS> <BEA-040049> <JMSServer "cgJMSServer" store failure occurred while writing message for queue ACMQueue, java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: flush failed
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: SQL exception
java.sql.SQLException: Connection failure. sendMethodRequest(...).

Hai Friends,
Previously i didn't give full stack trace. now i am sending the exact stack trace and little bit code. Plz help me
CaseQuerySearchResult cqsr = new CaseQuerySearchResult();
ObjectMessage obj = qsession.createObjectMessage();
while(rs.next())
// I am getting 10 fields from DB and setting those values like the following,
cqsr.children.setLoan(rs.getString(1));
obj.setObject(cqsr);
qconnection.start();
System.out.println("----B4 qsender----");
qsender.send(obj);
System.out.println("----After qsender----");
<May 15, 2006 12:05:47 PM IST> <Alert> <JMS> <BEA-040095> <JMSServer "cgJMSServer". Store I/O failure, java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: ping failed, database not responding
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: SQL exception
java.sql.SQLException: Connection failure. sendMethodRequestNoFlush(...).
at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
at com.pointbase.net.netJDBCPrimitives.sendMethodRequestPrivate(Unknown Source)
at com.pointbase.net.netJDBCPrimitives.sendMethodRequestByID(Unknown Source)
at com.pointbase.net.netJDBCConnection.setAutoCommit(Unknown Source)
at weblogic.jdbc.wrapper.PoolConnection.setAutoCommit(PoolConnection.java:141)
at weblogic.jms.store.JDBCIOStream.opendb(JDBCIOStream.java:2205)
at weblogic.jms.store.JDBCIOStream.ping(JDBCIOStream.java:1286)
at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:355)
at weblogic.jms.store.JMSStore.execute(JMSStore.java:493)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:498)
at weblogic.jms.store.JDBCIOStream.opendb(JDBCIOStream.java:2287)
at weblogic.jms.store.JDBCIOStream.ping(JDBCIOStream.java:1286)
at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:355)
at weblogic.jms.store.JMSStore.execute(JMSStore.java:493)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: ping failed, database not responding
java.io.IOException: JMS JDBC store, connection pool = <cgJMSPool-nonXA>, prefix = <weblogic>: SQL exception
java.sql.SQLException: Connection failure. sendMethodRequestNoFlush(...).
at com.pointbase.dbexcp.dbexcpException.getSQLException(Unknown Source)
at com.pointbase.net.netJDBCPrimitives.sendMethodRequestPrivate(Unknown Source)
at com.pointbase.net.netJDBCPrimitives.sendMethodRequestByID(Unknown Source)
at com.pointbase.net.netJDBCConnection.setAutoCommit(Unknown Source)
at weblogic.jdbc.wrapper.PoolConnection.setAutoCommit(PoolConnection.java:141)
at weblogic.jms.store.JDBCIOStream.opendb(JDBCIOStream.java:2205)
at weblogic.jms.store.JDBCIOStream.ping(JDBCIOStream.java:1286)
at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:355)
at weblogic.jms.store.JMSStore.execute(JMSStore.java:493)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:498)
at weblogic.jms.store.JDBCIOStream.opendb(JDBCIOStream.java:2287)
at weblogic.jms.store.JDBCIOStream.ping(JDBCIOStream.java:1286)
at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:355)
at weblogic.jms.store.JMSStore.execute(JMSStore.java:493)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)
at weblogic.jms.store.JDBCIOStream.throwIOException(JDBCIOStream.java:498)
at weblogic.jms.store.JDBCIOStream.ping(JDBCIOStream.java:1318)
at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:355)
at weblogic.jms.store.JMSStore.execute(JMSStore.java:493)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:224)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:183)

Code to Retrieve the message from Queue in Oracle BPEL

Actually I am placing the Message into JMS Queue using JMS Adapter.After Placing the message,I need to retrieve the placed message from same queue.
Right now I am using the Receive Activity and the JMS Adapter to retrieve the message from Queue.But my receive activity is always in the waiting state itself and I am not able to retrieve the message from queue.What might be the issue????
Can anybody give me a better suggestion so that I can go ahead??
Thanks in advance for your help.

Hi Raja,
Is the process a empty bpel process which is used to get the message from the MQ?
Regards
Surya

Blocking messages in Queue

Similar Messages

Maybe you are looking for