Blocking of Admin Pages on Web Server

I have two Apache servers acting as web servers for my portal application.
I want to block access to all the admin pages of Portal from one of them. The admin pages should be visible only from one of the servers where as the other pages should be visible on both the servers. Can you please tell how this can be done.

Which "admin pages" are you referring to?

Similar Messages

New admin for java web server

Hi,
i just installed Sun Java System Web Server 7.0. besides intsalling it, i don't know how to use it.
I am looking to add some files so users can view them. how do i go about doing that? I have no clue?
I don't know how to use it just yet but can follow instructions rather well.
i am a unix admin.
thanks
~jv

Ok.. it depends what type of content do you want to add.
You can start by dropping html documents in your instance's document root directory, usually /sun/webserver7/https-configname/docs.
making sure the server instance is running, hit the pages. And voila, you should be able to see it.

Defuld page on web server

I followed the instructions on this site, http://www.macinstruct.com/node/112 , and when i go to the site i made, it goes to the index of the webpage, where you can see all the pages and files of the website, and to go to the home page you have to click index.htm (my home page).
i know on pc server you can choose which page it goes to when you go to the url (defult page), but is there a way to do that on a mac too?

Thanks, for your help. It,s right ,is the first time than i try to do that. I have a little experience with Web publishing for File Marker server, but in this case i,m absolutely lost.
I don´t know who is hosting my DNS.
I want a Web service for my Home and my office network ( intranet), not for the WWW in this moment.
Sorry for my english, I.m from Barcelona Spain.
This is the configuration of my Web Service
Overview
Web Service is: Running
Start Time: Not Availble
Apache Version: Not Availble
Request / second: 0
Throughput: 0.0 B7second
This is my DNS settings
Overview
DNS Service is: Running
Start Time: Not Availble
Ptimary Zones: 1
Secondary Zones: 0

Safari referring page for web server tracking

I know that web servers can track what was the last page you came from before coming to your current page. (I'm not sure the right term, I think its referral)
Would this be the last web site I opened up in any tab in Safari? Or if I create a new blank tab, and then navigate to the destination site will it just be blank because I am coming from a blank tab?

Hi,
The referrer would refer to the page that you *clicked the link* on, to get to the current page. So, if you have 3 tabs, A B and C and you click a link in tab B, the referrer information would refer to the previous page you had in tab B. If you just type the url while in tab B and press enter, the referrer won't be set (as you weren't 'referred' from another site.
If you open a new tab, then there should be no referrer information sent. I'm not on a Mac to test right now, but try it with this page:
http://www.ericgiguere.com/tools/http-header-viewer.html
That will show what the 'referrer' page is set to. Clicking it from here should say you came from Apple Discussions. Just pasting the link in the url textbox or entering it in a fresh tab should show no referrer is set.
Hope that makes sense...

Adding expanding boxes for groups on front page of web server

Hello all..
At the moment we are expanding or wiki server and we need some way of organising the groups.
one idea was to sort the groups into expanding lists ie when you open the page all you see is staff and students then when you expand students you get all the student related groups.
Is this possible or is there a better way.
If we didnt sort it we will have a list 6' long

I want to do this as well. I've come up with a couple of ideas.
1. Create a custom html page for /groups and/or /users where you add/create the links to the various pieces by hand
- not very friendly to manage and doesn't leverage the dynamic capabilities the current /groups and /users pages have
2. Create some custom .js that adds a class or id attribute to the list or the list elements so they can be dealt with independently. For this to be easy to manage additional information needs to be pulled from the directory (Active Directory in our case) so you can ID students separately from faculty. Then the logic would be to modify group_listing.xsl and have it generate two UL's, one with a class or id attribute of faculty and the other student and loop the respective entries into each UL. CSS can be used to expand/collapse the lists.
- this seems doable if I can only figure out how/where to have the server pull additional information from AD (if the students and faculty are flagged as such in AD). This logic wouldn't deal with staff, but that could easily be added.

Admin activities in web server

Hi Team,
What are all the Admin activities that we can done in presentation services ...?
Thanks,

Click in Setting - > Administration and you will be able to see all that you can do.
Refer to BI Admin Guide as well

Cannot access web integration server admin page

Hi guys,
1)After Installing 9iAS and setting up all the configurations needed to run the sample test page .jsp file from the web integration server i get the following error....YOU ARE NOT AUTHORIZED TO VIEW THIS PAGE.
2)What value to set for HTTP & HTTPS proxy under the URL-http://host_name.domain:5555 ?
3)I tried to change the port number of the HTTP LISTENER from inside the http://host_name.domain:5555 pressed OK.Now how to find the port number of he web integration server(previously it was http://host_name.domain:5555 but now the port number is changed without which i cannot login to the admin page of that server.)
Gimme a solution to these probs
Thanx in advance,

I am trying to access our Production Enterprise Manager for the 10g AS.
When I try to access it I am getting an error:
An error has occurred!
IOException in sending Request :: Connection refused: connect
So from the command line I check:
emctl status iasconsole and it says that
EM Daemon is not running.
So then I type: emctl start iasconsole and it says:
An instance of Oracle 10g Application Server control is already running
Do you wish to shut down first?
If I say no, the startup is aborted. If I say yes then:
The OracleOracle10gASProdASControl service is not started?
What the heck does that mean? The status shows the Daemon is not started, but when I try to start it, it says it is already running? Can anyone help?
Thank you,
Jeff

Setting up a web server

Hi,
I have four or five domains registered and now I’m paying for web hosting (not much, but…). For many months now, I’m reconsidering to set up my own web server (I have DSL connection 24/7 so…).
One idea was to go with MS 2003 SERVER on some older PC I have, but since I’m not some expert (more or less dummy) for this things… gone down the toilet .
Then I bought an iMac (the best investment in past few years regarding computers) and on apple.com site I saw OS X SERVER software and more I was reading this more seemed that this is something for me, for my idea to set up a server.
Now I bought on eBay used G4 Mac Mini and I will install a OS X SERVER (please, don’t tell me that I’m trying to put a BMW engine into SMART… I know that and I hope that will somehow work… if not, there is still eBay to sell everything and there is still a toilet for my idea:-( ). However, the pages I own are not some crucial things for state security, but still I need PHP5 and MySQL (as far as I know OSX have this, right?).
My questions are:
To set up web server I need a DNS (like: nameserver.mydomain.com) otherwise nothing, right?
Do I have to register somewhere my own DNS like domains and to pay annually for this (any suggestion where)?
Hosting my other web sites (with other domains) on OSX will not be a problem. I suppose that OSX can do this?
If I have nameserver.mydomain1.com, will be a problem to set up an email server/account for mydomain2.com or I have to set up a DNS also for this second domain (will be on same server)?
I’m sorry, if my questions are stupid (on the other hand, someone said that there are no stupid questions, the answers can be stupid), but I’m really not familiar with this things.
Many thanks in advance and excuse me for my English,
M

Faganel, did you ever find a "Leopard Server as a Web-Server - Setup for Dummies" kind of guide or article?
If so, I'd really like answers and tips, to the same kind of questions you have.
I don't think this is the best forum, to ask for newbie-style advice. The people here are hard-working system-admins, who does web-server setups for a living, and they really don't have time, to answer questions like ours.
I've done dozens of Windows 2000 web-server setups at work, and the funny thing is, I could probably have helped you, had you gone with the Windows 2003 Server
However I'm trying to get some Xserves into our server room at work, and am evaluating Leopard Server here at home, and would like to do the same thing as you - Setup a Leo web-server with dyn-dns or something like that.
But because my knowledge is Windows, and because I've always worked with our own DNS and IP's, I'm having trouble getting my Leopard web-server here at home, to serve to the internet.
I can get it to serve perfectly to my own sub-net, but when I try to access it from the outside, I get nothing. I've setup my DSL-router to point web-traffic to the Leopard web-servers IP, but still get nothing.
However, I've just started, and I'm sure I'll get it to work, but some pointers would be really cool - obviously it can be done, just need to get my head around the fact, that I'm home and dealing with DSL and DSL-routers, and not the Ciscos and SonicWalls I'm used to at work
I must say though, that Leopard Server is an amazing product, and I'm positive well need to start buying Xserves from now on at work. The time saved setting them up and administering them, is HUGE when compared to the Win2000 boxes I have to fight every day at work
I also think Apple could make a very cool home-server, if they wanted too - I have no idea if it would sell, but Leo Server is almost so easy to setup now, that most people could get the hang of it ...
Anyways, if you or someone else has a guide, to getting it to serve webpages behind a DSL-router with a static IP, I'd be more than grateful - I'm sure this would impress my boss enough, that I'd get a handsome budget to explore Leopard Server some more - I't just awesome from a SysAdmins point of view.

Can anyone help me know the difference b/w application and web server?

i tried reading about application and web servers. it appears to me to be the same. please do help me to differentiate. Thanks :-)

An application server hosts business logic components for an application. A web server is an application which accepts HTTP requests.
An application server may come packaged with a web server.
A web server is a very simple process. It's HTTP daemon process that listens for incoming requests over HTTP protocol on a specified port usually, 80. For simple, static web pages the web server has the built in logic to serve them but for a complex operation(say read from database and display some records), it routes the URL to a component like the servlet engine....
An application server is a much broader term. For example the servlet may need to invoke certain business logic components like beans or activex dlls. The server that hosts these components is the application server.
Hope you are clear now.

Sun One Web Server connection pool goes stale after some time

Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.

Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.

Web server and remote vi trouble

Hi to all,
after reading this :
http://zone.ni.com/reference/en-XX/help/371361B-01/lvhowto/embed_vi_in_html_doc/
Seem possible to have a Central Labview Web server where all Html pages are stored, each page have an object that point to a remote VI (located on a remote machine).
I tried to set up the parameters in HTML OBJECT as described, but don't work.
In red is the code that i have added/modified
<PARAM name="LVFPPVINAME" value="test.vi">
<PARAM name="IPADDRESS" value="http://192.168.1.100">
<EMBED src="http://192.168.1.100/.LV_FrontPanelProtocol.rpvi82"
LVFPPVINAME="test.vi" IPADDRESS="http://192.168.1.100"
TYPE="application/x-labviewrpvi82" WIDTH=x HEIGHT=x
PLUGINSPAGE="http://digital.ni.com/express.nsf/express?openagent&code=ex3e33&"></EMBED>
</OBJECT>
Any suggestion?
Both my computer have LabVIEW Professional Development System 8.2
Thanks
Daniele
Message Edited by derusc on 11-20-2007 04:27 PM

Hi,
the dev zone document says that if you already have an HTML document, you can embed a VI in the HTML document so a client computer can view and control the front panel of the VI in a browser. It doesn't speak about store multiple html pages in web server. So maybe you are not refering to the right document. I don't think that you can manage multiple html pages from LabVIEW.
Clara
AE Manager
NI Italy

HP LaserJet Professional P1606dn Embedded Web Server Admin Settings

Hello,
I need help with my HP Laserjet Professional p1606dn. We have about 13 of these machines
I can access the HP Embedded Web Server by putting in the IP address into a web browser.
I have all of the printers set with a static IP address.
I have set a password in the HP Embedded Web server so network information can not be changed.
My problem is the Print Info Pages section.
Where i can just click Print to print a Print Configuration Page and Print Supplies page.
I want to disable that feature.
I have students getting into the Hp Embedded Web Server and are repeatedly hitting the print button and I'm getting hundreds of Print Configuration Page and or Print Supplies page.
You do not need a password to use this functionality.
I want to have these printers setup that if they do not know the Admin password to get into the Web Server they can not use any of the Web Server functions.
Any help would be appreciated.
Thank you.

Your usb connection may have gone bad. Try another usb port on the computer. Just connecting the printer to a different usb port should say new hardware found. If it does not then the port on the printer has gone bad. All is not lost. This model is the N model which means it also has a network interface. You could try connecting the printer to your router or switch with a rj45 cable and after turning the printer on and it comes to ready, wait about 2 minutes and then print the same test page which should give you the network settings if it found any. Use those settings to setup the printer as a local tcp/ip printer.

Admin Commands issue on Windows Web Server 2008 R2 - 64Bit

Hi,
I have tried exactly same process on FMS3.5 Installed on Centos and it worked perfectly.
But not working in case of Windows Web Server 2008 R2 - 64Bit.
Here is what i am trying to do -
Basically i want to extract live streams list and display them in HTML as ordered list on another server them FMS.
What i did in the case of FMS on Centos server -
I installed Apache and PHP on this server and created a PHP file with following text in it. -
abc.php
   $xml = simplexml_load_file('http://<fms-server-ip>:1111/admin/getLiveStreams?auser=admin&apswd=password&appInst=live','Simple XMLElement', LIBXML_NOCDATA);
foreach($xml->children() as $child)
   foreach($child->children() as $child2)
          echo $child2 . ",";
and in hosting server where i want to display the list i entered following code in PHP file -
$homepage = file_get_contents('http://<fms-server-ip>/abc.php');
echo $homepage;
i got comma seperated values easily and everything is loading fast without any issue.
Now problem occured with Windows Web Server 2008 R2 - 64Bit.
I installed FMS, Apache and PHP in this server also, did evrything in the same way like in centos.
FMS, APache and PHP files are working fine in this.
But only problem occured when in abc.php i use
$xml = simplexml_load_file('http://<fms-server-ip>:1111/admin/getLiveStreams?auser=admin&apswd=password&appInst=live','Simple XMLElement', LIBXML_NOCDATA);
After this file do not loads and takes longer time to load and after some time a blank page appears. It works fine with a local XML file.
i am able to see the XML file by opening it directly in browser, but somehow this is not working with   simplexml_load_file. I dont think this is PHP issue because with local XML file it works fine. May be some port issue or something else. But i am able to view XML file directly in browser from another computers as well.
Kindly help, is there some other configurations should be changed in case of windows version. I have allowed admin commands as usual before doing all this. Ports 1111,80,1935 are also opened.
Please guide

Hi,
Yes in Browser, the response is perfect. The only issue is in Calling inside in any file, i even tried Javascript's XML dom to load it, but same result, the file is just loading and never loads completely. I also tried using an SWF file with AS3 code to load XML inside as3 and send the result to any JS function.
The output comes using trace in as3, but when it comes to browser, the same loading happends and result never loads.

Sun one web server 6.0 admin instance

Hi,
After installing Sun one web server 6.0 sp6 on HP-UX, the admin server instance seems to work fine (i.e. I can bring up the admin web page). However, I cannot bring up web page from other web server instance. it gives me this error "the page cannot be displayed". Am I supposed to get a default webpage from this web server? How can I tell if this web server is working properly? Please help.
thanks,
Paul

Hi,
thanks for your prompt reply Joe. No, I don't get anything in the access log but I got some error messages in error log. It looks like the error indicates the web server crashed. Please help. I've been struggling to get this web server running and it's going nowhere.
"[24/Dec/2003:08:40:19] catastrophe ( 8291): Server crash detected (signal SIGBUS)
[24/Dec/2003:08:40:19] info ( 8291): Crash occurred in NSAPI SAF NSServletNameTrans
[24/Dec/2003:08:40:26] failure ( 8290): Child process admin thread is shutting down
[24/Dec/2003:08:40:26] info ( 8326): Installing a new configuration
[24/Dec/2003:08:40:26] info ( 8326): [LS ls1] http://hpusam20, port 1040 ready to accept requests
[24/Dec/2003:08:40:26] info ( 8326): A new configuration was successfully installed
[24/Dec/2003:08:40:26] warning ( 8326): Port directive ignored
[24/Dec/2003:08:40:26] warning ( 8326): The server configuration may require more file descriptors than the operating system provides. If you encounter PR_PROC_DESC_TABLE_FULL_ERROR errors, you may wish to increase the operating system hard file descriptor limit from 1024 to 5763 (see your operating system documentation) or decrease one or more of the following settings: MaxFiles in nsfc.conf and ConnQueueSize, RqThrottle, and MaxKeepAliveConnections in magnus.conf."

How do I configure a Sun One Web Server 6.1 to run JSP pages

I have a Sun One Web server version 6.1 running on Solaris 10.
The web server is not configured to run JSP pages. When I try and run a JSP page, I get an HTTP 405 error.
Can somebody please point me to the configuration directions, including changes to the obj.conf, magnus,.conf, etc.
Thanks

Web Container is enabled by default.
Here are my config files
$tail -1 magnus.conf
Init fn="load-modules" shlib="/export2/ws6.1sp11/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"$cat obj.conf
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="ntrans-j2ee" name="j2ee"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/export2/ws6.1sp11/ns-icons" name="es-internal"
NameTrans fn="document-root" root="$docroot"
PathCheck fn="unix-uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD)" type="magnus-internal/imagemap" fn="imagemap"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
Error fn="error-j2ee"
AddLog fn="flex-log" name="access"
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi" user="$user" group="$group" chroot="$chroot" dir="$dir" nice="$nice"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>JAVA settings in server.xml:
<JAVA classpathsuffix="" debug="false" debugoptions="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n" dynamicreloadinterval="-1" envclasspathignored="true" javahome="/export2/ws6.1sp11/bin/https/jdk" nativelibrarypathprefix="" serverclasspath="/export2/ws6.1sp11/bin/https/jar/webserv-rt.jar:${java.home}/lib/tools.jar:/export2/ws6.1sp11/bin/https/jar/webserv-ext.jar:/export2/ws6.1sp11/bin/https/jar/webserv-jstl.jar:/export2/ws6.1sp11/bin/https/jar/ktsearch.jar">
        <JVMOPTIONS>-Djava.security.manager</JVMOPTIONS>
        <JVMOPTIONS>-Djava.security.policy=/export2/ws6.1sp11/https-alamanac.india.sun.com/config/server.policy</JVMOPTIONS>
    <JVMOPTIONS>-Djava.security.auth.login.config=/export2/ws6.1sp11/https-alamanac.india.sun.com/config/login.conf</JVMOPTIONS>
    <JVMOPTIONS>-Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager</JVMOPTIONS>
    <JVMOPTIONS>-Xmx256m</JVMOPTIONS>
    <SECURITY anonymousrole="ANYONE" audit="false" defaultrealm="native">
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.file.FileRealm" name="file">
        <PROPERTY name="file" value="/export2/ws6.1sp11/https-alamanac.india.sun.com/config/keyfile"/>
        <PROPERTY name="jaas-context" value="fileRealm"/>
      </AUTHREALM>
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.webcore.NativeRealm" name="native">
        <PROPERTY name="jaas-context" value="nativeRealm"/>
      </AUTHREALM>
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.ldap.LDAPRealm" name="ldap">
        <PROPERTY name="directory" value="ldap://localhost:389"/>
        <PROPERTY name="base-dn" value="o=isp"/>
        <PROPERTY name="jaas-context" value="ldapRealm"/>
      </AUTHREALM>
            <AUTHREALM name="solaris" classname="com.iplanet.ias.security.auth.realm.solaris.SolarisRealm">
              <PROPERTY name="jaas-context" value="solarisRealm"/>
            </AUTHREALM>
    </SECURITY>
    <RESOURCES>
        </RESOURCES>
</JAVA>

Blocking of Admin Pages on Web Server

Similar Messages

Maybe you are looking for