Blocking reception of some type of POs

hello,
we wish block to the storekeepers the reception of the PO of the type ZMM1, because the this PO type reception must be done on another system, and the reception will be sent to SAP with RFC interface.
the objective is to modify the MIGO so that at the time of the reception of an ZMM1 PO by a Dialog user ( different to system user used par the RFC interface ) SAP must block and post a message as the receptiond of ZMM1 PO is prohibited
how can we do to solve this problem? by using user exit in MIGO ? or just an customizing?
thank in advance for your answers.
Said

Hello Andreas,
easiest way would be matching to the file name with the file name action in message or content filter (I suppose you'd not need a condition for that, because an action drop-attachment-by-filename is already a perfect fit, and makes the filter easier).
In theory, there is also a message filter condition called "attachment-binary-contains", which let's you enter a binary pattern, i.e. a magic number for a given file type. However, this condition has no corresponding action to drop that attachment, so it would be only useful to quarantine or drop a whole message.
Hope that helps,
Andreas

Similar Messages

How to block a Billing Document Type?

Hi forum
I need to block the billing document type FV-Invoice Contract.
Is there some configuration to do that? I found VOFA where you can change billings documents, but I cant find how to block it.
Thanks for your support.

If I am correct, go to IMG Sales and Distribution --> Billing --> Billing document --> Define Blocking reasons --> Aassign blocking reasons to billing types.
Right now I dont have access to SAP and hence not sure on the path.
thanks
G. Lakshmipathi

Purchase order Block for UB document type

Hi
I have closed the site (e.g. R200) through transaction code WB02; closed the site date and also bloke the vendor u2013 R200.
When I am trying to create purchase order with document type UB, as supplying site u2013 R200, it is allowing me to create Purchaser orderu2026
While, vendor u2013R200 is blocking during creation of purchaser order with document type NB, as it should be, because we have block the vendor.
My requirement is that, I would like to block PO during document type UB as well.
Please help me, if there are some master data needs to be block.
Please note that, we have been asked not to remove config from u2018default document type for stock transfer orderu2019,
Regards
Vanraj

Thanks Padmsri,
as you suggested, supplying site R200 is already assigned to R200 vendor and we have blocked the vendor as well.
and company code is also same for both,
but still, we are able to create PO for UB type, however it is blocking for NB type.
could you please help more on that or guide us to where we can explore... is it some config or master data?
Regards
Vanraj

Block Attachments by File Type

We have requirement where we want to block emails with attachment type :
.ade .cmd .eml .ins .mdb .mst .reg .url .wsf .adp .com .exe .isp .mde .pcd .scr .vb .wsh .bas .cpl .hlp .js .msc .pif .sct .vbe .bat .crt .hta .jse .msi .pl .scx .vbs .chm .dll .inf.lnk .msp .pot .shs .wsc… etc.
Some of these extensions are not listed in File type under content filter. Please let me know the alternate way to block the same.

You will be best suited to create a message filter to scan and drop. Similar to:
attach_drop: if (attachment-filename =='(?i)\\.(ade|cmd|eml|ins|mdb|mst|reg|url|wsf|adp|com|exe|isp|mde|pcd|scr|vb|wsh|bas|cpl|hlp|js|msc|pif|sct|vbe|bat|crt|hta|jse|msi|pl|scx|vbs|chm|dll|inf|lnk|msp|pot|shs|wsc)$'){
drop();
See the User Guide for full details on message filter, and examples. They may contain a better solution, and provide you full details on getting started, tweaking.
http://www.cisco.com/c/dam/en/us/td/docs/security/esa/esa8-5-6/ESA_8-5-6_User_Guide.pdf
http://www.cisco.com/c/en/us/support/docs/security/email-security-appliance/118145-technote-esa-00.html
-Robert

My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work.

My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work. I'm using a Windows Vista.

Hi there,
I've got a couple of articles that may help you out. This first one goes over how to properly remove and reinstall iTunes.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
This next one goes over some of the troubleshooting steps if you are having issues reinstalling iTunes.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Hope that helps,
Griff W.

Hi, I installed IOS7 in my iPad and now when I want to turn it on it ask me for a password, when I configured I do not remember to ask me for a password , and now it is blocked I put some password that could be but no one of them are, what can I do ?

Hi, I installed IOS7 in my iPad and now when I want to turn it on it ask me for a password, when I configured I do not remember to ask me for a password , and now it is blocked I put some password that could be but no one of them are, what can I do ? Please help me

Hi, I installed IOS7 in my iPad and now when I want to turn it on it ask me for a password, when I configured I do not remember to ask me for a password , and now it is blocked I put some password that could be but no one of them are, what can I do ? Please help me

Is it possible to pass some type of parameter/unique id FROM PDF?

hi there,
I will try to explain this as best as I can but please bear with me.
I have Adobe Acrobat X Pro.
We have drawings linked to each other in pdf.
When you open a drawing (say, a layout of a house), my boss wants to be able to click on say, a door, and have all the information on that door pop up (size, manufacturer, when it was shipped, etc). The information log is stored in Excel. I know how to hyperlink to open an excel file FROM pdf, but cannot figure out how to open a specific sheet in Excel. So here is my question:
1. How do I link to a specific sheet in Excel so it opens when I click on a link in the pdf file?
Having said that, we are going to have around 1500 items and I don't want to have to create 1500 sheets (if that's even possible) to open the details for each one. So here is question #2:
2. Is it possible to pass some type of parameter to excel (or even Access) to know what item was clicked on the pdf file so I can write a macro/code in Excel to just fill in the details for that item? (Hence just needing one sheet instead of 1500?).
Suggestions/path forwards are welcome.
I hope this was clear and I thank you in advance.
Thanks,
Jessica

There really isn't a way to do that. It would be possible to export an Excel sheet to a tab-delimited (or CSV, XML) file which could optionally be attached to the PDF. JavaScript inside the PDF could read the data file and extract the information for an item so it could be displayed somehow.

How to set posting block in BIlling Doc type configuration

Hi All,
Can anybody tell me, How to set posting block in BIlling Doc type configuration.I need to do this to seperate billing creation from from FI/CO posting in my company.
We right now run have the batch jobs which run VF06 & VFX3.
Appreciate any input or suggestions.
Regards,
Vinay

Hi
If you want to check the Manual posting blocks you can configure them through FI/CO. Once you have configured the blocks with reasons it will automatically block for the payments.
goto SPRO-> Financial accounting->Account receivable & Payable ->Business Transactions-> Out going Payments-> Manual outgoing Payments-> Check payment block reason.
Cheers

Block material at material type(HIBE) level for movement type "261" & "261"

Hi,
Block material at material type(HIBE) level for movement type "261" & "261".
Requirement: This material type should not issued to the PM orders using above mvt types.
regards,
Venkatesan Anandan

As per standard it is not possible. go for ABAP development

Return billing type for POS data upload

Hi,
From the configuration, it only available for one billing type for POS upload. If i want to separate another billing type for return, how can i configure it. Thanks

Hi ,
You can create your custom billing type by navigating below menu
Goto SPRO->Sales and Distribution -> Billing -> Billing documents -> Define billing types. Here select any one of the standard SAP billing type (which ever is relevant to your business like FP for Interface
Billing - POS system), then click on copy as button to create a new one enter then give name for your new billing type for example ZFP, ZRE and then save it.
BR
Ajaya Kr. Mishra

How to block or restrict document type

Hi friends
How to block or restrict document types .
My Business people will not use document types in feature

Hi,
The documentation about the authority check within posting is given in the online documentation for the posting ta eg. FB01:
Perhaps you would like to read the documentation from IMG on the authorization:
Financial Accounting > Financial Accounting Global Settings > Document > Document Header > Check Display Authorization for
Document type
Defining Authorizations for Document Types
Use
You can define a special authorization for every document type. To do this, you need to determine what document types in which
form employees are allowed to process. Authorizations are checked for the following activities:
Posting documents
Document display and line item display
Changing documents
Programs that evaluate documents.
The system does not check the authorization for document types that are not assigned an authorization group.
Procedure
In Customizing for Financial Accounting, carry out the activity Maintain Enter an authorization group in the document type. You then assign autho For each document type, you can specify whether users are required to enter.
The same for check of the authorizations of gl accounts.
PLease check in OMR4 and in OBA7 that for the document types the athorizations groups are maintained.
F_BKPF_BLA Accounting Document: Authorization for Document Type
F_BKPF_BES Accounting Document: Account Authorization for G/L Account.
For example:
The transaction FB01 includes the above objects - you can see this in Trx. SU24, also as transaction F-02 is a parameter transaction with the original being FB01 these objects would be valid for F-02 also.
Please also refer to the following NoteS
150496 F_BKPF_BLA: Authorization for document types
198238 FI reporting: Authorization check for documen
I hope this helps to solve the problem.
Regards
Ravinagh Boni

Hide some types of links in Panel Links.

Is it possible to add a filter on a list of links (Links Panel)?
I add an observer on kDocBoss.
In the Update function, I do not know how to retrieve the contents of the list (kLinksListWidgetID) to hide some types of links.
Do you have some ideas.
Best Regards,
Badr NASSER

Hi,
I tried the same code. I am getting the following error. Could anyone help me how to solve this error?
Error(74,1): class OAGlobalButtonBarBean not found in class XXX.oracle.apps.po.requisition.webui.CustomPageCO
I am new to OAF. Looking for some help.
Thanks
Edited by: 803923 on Oct 25, 2010 11:10 AM

Ssrs and script from was blocked due to mime type mismatch

Hi
I'm trying to add a script to my header on my SSRS report. I've been following this link:
http://blogs.infosupport.com/reporting-services-javascript-injection/
I get error stating:
SEC7112: Script from http//####/HCCReportsServer?/ReportsLibrary/script.js was blocked due to mime type mismatch
My code:
="<a href=""javascript:eval(unescape('function addScript(scriptFile){var head = document.getElementsByTagName(\'HEAD\')[0]; var script = document.createElement(\'script\'); script.setAttribute(\'language\', \'JScript\'); script.setAttribute(\'type\', \'text/Javascript\'); script.setAttribute(\'src\', scriptFile); head.appendChild(script);} addScript(\'http://dc1-sqlrs-d02/HCCReportsServer?/ReportsLibrary/script.js\');'))"">inject</a>"
Please help. This is urgent to get it working for a demo.
Thanks

Hi Sunette,
Based on my understanding, you come across an SEC7112 error when you inject JavaScript into the Reporting Services.
In your scenario, you should remove the below setting in the web.config file(Location: C:\inetpub\wwwroot\wss\VirtualDirectories\<your port>).
<add name="X-Content-Type-Options" value="nosniff" />
As we tested in our environment(SQL Server 2012,SharePoint 2013,IE 11), we can inject JavaScript successfully. Please refer our test steps and results:
1. Delete “X-Content-Type-Options" with value "nosniff" within the web.config file (Location: C:\inetpub\wwwroot\wss\VirtualDirectories\80).
2. Design the report as below, then deploy the report to the SharePoint site.
3. Create the script.js file with code below, and upload to the SharePoint site.
function test()
alert("The CHANGEME textbox will actually change…");
//var doc = window.frames[1][1].document;
var el = document.getElementsByTagName('span');
for (var nr=0; nr<el.length; nr++)
if (el[nr].innerHTML == "CHANGEME")
el[nr].innerHTML = "I FEEL LIKE A CHANGED TEXTBOX";
4. Run the report. Click the “inject”->”test”, the final results should look like below:
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu
Qiuyun Yu
TechNet Community Support

Does iPad/apple block access to some websites without my permission?

Does iPad/apple block access to some websites without my permission?

There is in fact no native ability in iOS to block specific web sites. All you can do is turn off Safari completely.
As the others have suggested, either those sites are not compatible with the browser in iOS (being based on Flash or Java, or using Microsoft-proprietary components that work only in Internet Explorer, for instance), or your Internet connection is blocking the sites.
Regards.

HT1222 how do i downlaod all itunes, pictures, etc. from Iphone4 to 5s. I get some type of security issue

How do download itunes and pictures from 4 to 5S. I go through itunes and receive some type of security violation message

What exactly does the message say?
You don't download from one iphone to another. You sync both to itunes on your computer.

Blocking reception of some type of POs

Similar Messages

Maybe you are looking for