Blocking some data in MSA with AMT help

Hi all,
I start working on AMT recently and I find it very unfriendly. I have some clients from two Sales Org. and I want that MSA users (employees) just can access to the Data Client only for their own Sales Org.
This is what I tried:
1) Creating a rule for BO Field VKORG
2) Creating a variable and assigning it to the previous rule
3) Creating a token and assign the rule to this token.
4) Assigning the token to my employee role.
I assume that I need to enter a value for the variable when I assigned the token to the role, but the system doesn't ask for it.
Could you help me?
Thanks in advance and regards,
Enric

Hi Enric
I sent you a doc on it.
When setting things up keep in mind that data availability is done via subscriptions and only the read/write access is controlled via the AMT - at least this was the concept for the original AMT design. This should work nicely as long as your customers do have only one sales org assigned - just enhance the CAPGEN-replication object with a criteria on SMOKNVV-VKORG / VTWEG / SPART and build up your publications / subscriptions accordingly.
If your customers have more than one sales area then for a nice solution you would have to program a bit to make the tile readonly depending on a sales area comparison between logged-in user and the BP displayed.
Regards, Kai

Similar Messages

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup

I have my catalog "Back Up Each Time Lightroom Exits" checked, and always have. That means the catalog should have been backed-up and saved everyday, if not more than once on some dates. So with a a major problem now and needing to use the Catalog backup from last Friday, I go to my Lightroom Backups folder - and the most recent one showing not only isn't yesterday, it's OCTOBER 28 !?? Where the hell are the daily backups between October 28 and November 14?

Oh wow - JET LAG strikes agin - my apologies; I have located the missing weeks of back-ups. After getting home from a 30-day trip to Europe, I had changed the location of my LR catalog back-ups to an external drive, and forgot that I did that. I have found them, and all is good. Never operate Heavy Machinery without enough rest. Cheers

How to block lost lenovo A6000 mobile with IMEI

List out the procedures to be followed to block the lost LENOVO A600 with the help of IMEI?
IMEI 1:- XXXXXXXXXXXX
IMEI 2:- XXXXXXXXXXXX
Mobile No :- XXXXXXXX,XXXXXXXX
Moderator note: Personal information removed for member's protection.

Hi clicksteps
You can lock,factory reset or even locate(if location services are enabled)your phone using your Google account(the Google account you were using on your phone).Go to https://www.google.com/dashboard/ -> Sign in to your Google account(the one used on the phone)->go to Android/Manage active devices->from there you can ''Ring'',''Lock'',''Erase'',''Locate'' or ''Rename'' the device.
Unfortunately only the mobile service providers/operators can ''blacklist'' a certain IMEI number.
The IMEI number can also help local authorities(local police department) to track down your phone.
Hope this helps
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as ''ACCEPT AS SOLUTION"!
Unsolicited PM's will not be answered! ....Please post your question/s in the appropriate forum board.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Help with "The Finder can't complete the operation because some data in "iPhoto Library" can't be read or written. (Error code -36)" Any ideas on how to fix this?

While trying to copy my iPhoto Library (49.61 GB) to an external hard drive, I receive the error message "The Finder can’t complete the operation because some data in “iPhoto Library” can’t be read or written. (Error code -36)"
I need to move my library because I have no more disk space. This was going to be step 1 followed by backing up to another EHD.
More details: iPhoto version 9.6 (910.29) OX X Yosemite Version 10.10.1 (Mid 2011 Mac Book Air). EHD= WD Elements 1 TB (purchased at B&H Photo where the sales associate formatted it for a Mac).
Any step by step ideas for help are appreciated! I've read through a few threads but need more step by step directions.

That error message is an I/O error which can mean a number of things, among them a bad file. Here's a couple of fixes you can try:
1 - use the free version of iPhoto Library Manager to rebuild the library with the rebuild being created on the EHD as follows:
Using iPhoto Library Manager to Rebuild Your iPhoto Library
1 - download iPhoto Library Manager and launch.>Click on the Add Library button,
2 - select the library you want to add from those in the selection window.
3 - make sure that in the rebuild window the checkbox "Scavange orphaned photos" is checked.
4 - now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option
5 - in the next window name the new library and select the location you want it to be placed. Click on the Create button.
Note 1: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments. However, books, calendars, cards and slideshows will be lost.
Note 2: Your current library will be left untouched for further attempts at a fix if so desired.
When iPLM finishes it will display a log file entry showing which files it was unable to use in the rebuild. Open the old library with iPhoto, locate and delete the photos that iPLM listed in its log. Then try dragging the library to the EHD again.
If the above fails continue with:
2 - create a new, empty library on the EHD. Use the paid version of iPhoto Library Manage to copy the events (1-2 at a time) to the new library on the EHD. At one point iPLM may run into the bad file and be unable to copy the event. You can check iPLM's log to see what file it is. Then open that library, delete the file and either try to copy the entire library by dragging and dropping or contine with the copying of events from the old library to the new library.

Data Sheet View - Cannot Connect to Server at This Time. You can continue working with this list, but some data may not be available

After a couple of years of trouble free operation, one of the lists in our SharePoint Foundation site suddenly (overnight) started presenting the error against Datasheet views on lists.
The view returns a large number of items when working correctly c.6K - however Throttling Settings have been adjusted accordingly some time ago without detrimental affect on SharePoint users and network in general. As admin and therefore throttling at 20k
items the error message still presents.
The view was working fine at 4:30pm Wednesday 27/3, but was returning the error at 8:30am the next morning. To my knowledge very few items (if any) had been added to the list between those times and no system level changes had been made (SharePoint,
SQL Express, or virtual Windows 2008R2 server).
The problem is most apparent on 2 lists in SharePoint. I've checked that the settings within SharePoint admin are set to deal with queries that should accommodate the
number of rows that are returned by the views associated with that list. It is still possible to create new items to the list and access data via 'standard views' that are presented with groups that are collapsed.
Items in Documents Libraries on other parts of SharePoint and within the same subsite can be accessed at what feels like pretty normal speed -though small query size
may mean the problem is masked to a large extent.
More Specific
The lists still open in Standard View -though much more slowly than was the case before the above error started to present.
List Details
Referrals Tracker (10,442 items) -the list was 10,420 something items on Wednesday when all was working fine.
LD Tracker (4,390 items)
Both lists have grown incrementally over the period of a couple of years rather than by adding a block of data to the list. Items are added/ updated one at a time using the associated
form or directly into cells within a datasheet view.
That it is also experienced against the smaller list suggests to me that the number of items in the Referrals Tracker is not the main factor here.
In attempting to resolve the issue I have managed to get datasheet views working that deliver 100 items and c2k items. Both views present much more slowly than we would normally expect.
Throttling Settings
List view limit - 12K items - has been this high for some time without damaging SharePoint performance across the company.
Actions Taken So Far (no improved performance seen)
The SharePoint Foundation WSS Content DB did was closer to the 10GB SQL Express limit earlier this month, however a clear down and rationalisation of versioning settings
was undertaken to ensure that did not become a problem going forward.
We did a Shrink on Thursday (the day the issue started presenting) to rationalise whitespace as all indicators were that this was where the problem may lie, but this has
not resolved the problem.
The WSS Content DB now sits at c5.5GB.
What I Need to Know
1) I'd like to understand what is causing the problem?
2) What the fix is? or,
3) How I might go about diagnosing the problem further to arrive at a fix.
With all the above, I'm part wondering if the problem is related to the virtual server or poss SQL Express related rather than being a 100% SharePoint issue?

Hi
afearn,
More often this is related to columns which are not editable by user, some columns are not editable in datasheet view. Please check if there is any new column addition and then you started getting this issue.
Also datasheet view displays all items on same page so definitely it takes little long time then load in standard view.
Let us know your results, thanks
Regards,
Pratik Vyas | SharePoint Consultant |
http://sharepointpratik.blogspot.com
Posting is provided AS IS with no warranties, and confers no rights
Please remember to click Mark As Answer if a post solves your problem or
Vote As Helpful if it was useful.

Sharepoint list dataheet view error "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available"

I have a List which is having around 14000 items in it.while opening that list in datasheet view it is giving error .
Below is a summary of the issue:
After selecting datasheet view beow error occurs:
    "Cannot connect to the server at this time. You can continue working with this list, but some data may not be available."
    "Unable to retrieve all data."
    The item counts displays say 100 out of 14000 items.
Exporting List to excel is giving only 2000 records out of 14000 records.
Other Observations   -
This is happening to only one list on the site .There are other lists in the site whose no. of records is equal to 8000 to 9000.They are working absolutely fine without any error.
Also, If I am saving this list as a template and creating another list with it ,then it is working absolutely fine with 14000 records,so the issue does not seem to be related with no. of records as the template list is working fine.
I have checked the Alternate access mapping setting ,its fine.
It should not be related to lookup,datefield or any other column as the list created from it template is working fine with all these columns.
I checked below links also ,but doesn't seem to work in my case.
http://social.technet.microsoft.com/forums/en-US/sharepointadminprevious/thread/974b9168-f548-409b-a7f9-a79b9fdd4c50/
http://social.technet.microsoft.com/Forums/en-US/smallbusinessserver/thread/87077dd8-a329-48e8-b42d-d0a8bf87b082
http://social.msdn.microsoft.com/Forums/en-US/sharepointgeneral/thread/dc757598-f670-4229-9f8a-07656346b9b0

I have spent two days to resolve this issue. Microsoft has released two KBs with reference to this issue...but are not appearing in search results at the top.
I am sharing my finding.
1. First install the
KB2552989 (Hopefully you might have already installed it. The KB detetcts it and informs the user.)
2. Then update registry by adding new key for data fetch timeout as mentioned inKB2553007
These two steps resolved the issue in our environment. Hope it might help others as well.
Pradip T. ------------- MCTS(SharePoint 2010/Web)|MCPD(Web Development) https://www.mcpvirtualbusinesscard.com/VBCServer/paddytakate/profile

Image capture deleted all my photos from iPhone without transferring them to the harddisk. So now I've lost 427 photos due to some data error it says. Please help me get my pictures back!?!

I just wanted to back up my photos since I haven't done so since October 5th. I plugged in my iPhone and let Image Capture transfer the selected photos to the designated folder. Accidently I hit 'Import All but that's not the biggest problem. Apparently I had "Delete all after transfer" on AND 427 photos apparently "failed to transfer" as it said. I didn't think it was such a big problem, but then I noticed : what the ****.The delete all option was ON and now ALL my photos are gone, from the iPhone and NOT on the computer. Except a list of some old pictures I already have three backups and from the new ones between Oct 5 and this day I have a random selection >><!!!
So please help me! How do I get my pictures back? iPhone Data recovery? Please please help. There are so many nice memories of this month and I'm so ****** that this just happened!

If you have iCloud backup turned on or if you have recently backed up via iTunes you could restore the phone from either of those sources. Camera Roll photos are included in those backups. Be aware that doing a restore will replace the contents of the phone with the contents of the backup so you would lose anything new on the phone since the last backup. Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36)."

While transferring several files to the G-Raid, the G-Raid device locks up with the following warnings: "The Finder can't complete the operation because some data in (whatever file) can't be read or written (Error code - 36).” NOt sure this is a G-Raid problem, can anyone help?

This is likely a problem with the drive itself. This error indicates unspecified I/O errors with the drive, which can be from a hardware fault, or a formatting issue. If the drive has valuable data on it, then try connecting it to another PC to get the data off, and then try fully partitioning and formatting the drive with Disk Utility. If this corrects the error then you should be able to use the drive again as it was likely a formatting issue, but if the problem continues then it is likely a hardware fault and the best solution is to be safe and replace the drive.

Transfer Of Data from Sap to Oracle with the help of Enterprise Services.

Hello,
We want to transfer data from Sap to Oracle using standard Enterprise Services.Some fields were not available in the existing standard Enterprise Services,so we have enhanced the existing Services by writing code inside BADI available with Enterprise Services.Rest of the fields we have mapped with the existing fields available in standard Enterprise Services.But,the Oracle people want to fetch all data from Sap without entering any input as a mandatory field in the Enterprise Services.The existing standard Enterprise Services require to enter any field as mandatory and are not accepting the range in input for multiple records.e.g.All enterprise Services related to Sales Orders are displaying only one sales Order.We have searched all Enterprise Services for Sales Order(related to reading of data),but not able to find service which would display mutiple records without entering any input.ECC_SALESORDER009QR is the only service which is displaying multiple records without entering any input,but the required fields are not available in this service.So,kindly suggest what we need to do further.
1.Should we go for customization of services completely,so that it would fulfil our requirement.
2.Are there standard Enterprise Services exists which would we give us data in range(all records).
If they exists,please specify the names of Services for reading Purchase Order,Production Order,BOM etc.
Thanks & Regards,
Divya.

Hi Vaibhav,
Let me tell you the objective in detail.
Objective.
To develop a package solution which will work as a bridge between Oracle APS and SAP system so that customers using SAP will be able to use advantages of Oracle APS for their planning needs.
This will consist of following major components:
OA Templates is an Oracle utility to load data from any legacy system to Oracle APS using standard flat files.
Oracle has developed an Application Integration Architecture which is a standard architecture used for integration of Oracle products with other systems.
Enterprise services is an SAP utility to communicate with SAP.
AIA canonicals are standard canonicals developed by Oracle where we have to map data fields from destination system (Oracle APS) and source system (SAP)
Fusion middleware is being used to develop application interfaces following AIA standards.
Tasks at stake:
Mapping of Oracle APS fields and SAP Enterprise Service fields to AIA canonicals
Technical work of developing middleware using Oracle Fusion
From Sap side,we have to map fields which we have received from Oracle with the help of Enterprise Services,rest consumption of these services is done by Oracle guys.So,suggest is there enterprise services available which would give us multiple records .
Thanks & Regards,
Divya.

HT201210 I have updated my iPhone to iOS6.1.3 today and lost all my photos and some data(messageies) I have tried iTunes back up but still not success, please help. This

I have updated my iPhone to iOS6.1.3 today and lost all my photos and some data(messageies) I have tried iTunes back up but still not success, please help.

If your messages and photos weren't part of your backup, then they're gone.
Certainly you weren't foolish enough to update the iOS on your phone before importing your photos off your phone for safe keeping on your computer like you would do with any digital camera, were you?

I cannot open some pdf files online with Reader XI (like sample forms in Help section).

I cannot open some pdf files online with Reader XI (like sample forms in Help section or IRS.gov or credit card statements). I have uninstalled Reader XI, cleaned and reinstalled. I have no problem right-clicking and downloading and then viewing the files. No problem viewing acrobat files. I'm runnnig Windows 7, IE9. I can acces them through Chrome.

RESOLVED
I found two suspect programs that were installed within the last 48-hrs that may have caused the problem
1) - Libre Office - latest update. This is a fork of Open Office. (unlikely)
2) - ManyCam video manipulation software (likely)
Following info here, I opted to try to open an Adobe PDF file that was on my hard drive. When I did, it refused and IE10 gave me an ActiveX error (AHA!!). When I checked the installation of ManyCam, it had installed a version of DirectX that may have over-written the resident versions or disabled them somehow.
I uninstalled ManyCam but left Libre Office's update in place, then I ran a system restore from a point 24-hrs before the installations.
This resolved the problem 100%.
So, the suggestion here is that there may be one or more program in the wild that is interupting the ActiveX or DirectX systems. They may be running or installing an older version. In this case it appears the handlers were broken.
Once the system restore had completed I was able to open Adobe PDF files within my IE10 browser from the Internet as well as open PDF files from my hard drive.
Note that this same issue also clearned up a problem I was having with the Comodo Dragon web browser, which is a fork of the Chrome project. Once I eliminated the suspect program and ran the system restore all was well. In the instance of the Comodo browser it was unable to open or reach anything - dead white screen below the menu bar.
So my suggestion would be to take an inventory of recent program installations, remove/uninstall them, run system restore from a date before the suspect programs were added, and see what happens. In my case that fixed the problem.

Goto: How to export some data from the tables of an owner with integrity?

Hi to all,
Help please: How to export some data from the tables of an owner with integrity?
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

I bought iPhone 4 for my wife, didn't create a separate apple ID account for her at that time. How can I now create a new one for her, sync her phone to the same PC that I sync my iPhone with without loosing all of her data, contacts, etc. Please help!

My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!

My old computer (a Sony) with my iTunes crashed. I have a new MAC and want to make sure I can keep all of my music (mostly from old CD's that have been lost). I bought iTunes match hoping that would work but it isn't using the data on my phone. HELP!

Since you have purchased a new Mac (which, BTW, is not typed in all capitals) why not buy a Time Capsule <http://www.apple.com/airport-time-capsule/> which is designed specifically to work with OS X and Time Machine?
You don't say what part of your Sony "crashed." If it was not the HDD it is possible to take the computer apart, put the HDD in an external case, then recover the data off of it (including the music) simply drag-n-drop. If it was the HDD that "crashed" that makes it more difficult.
If you are able to recover the music from the Sony you can then add it to the iTunes library on the Mac and iTunes Match will then scan, match and upload the tracks to be mirrored in the cloud.

How to export some data from the tables of an owner with integrity?

Hi to all,
How to export some data from the tables of an owner with integrity?
I want to bring some data from all tables in a single owner of the production database for development environment.
My initial requirements are: seeking information on company code (emp), contract status (status) and / or effective date of contract settlement (dt_liq_efetiva) - a small amount of data to developers.
These three fields are present in the main system table (the table of contracts). Then I thought about ...
- create a temporary table from the query results table to contract;
- and then use this temporary table as a reference to fetch the data in other tables of the owner while maintaining integrity. But how? I have not found the answer, because: what to do when not there is the possibility of a join between the contract and any other table?
I am considering the possibility of consulting the names of tables, foreign keys and columns above, and create dynamic SQL. Conceptually, something like:
select r.constraint_name "FK name",
r.table_name "FK table",
r.column_name "FK column",
up.constraint_name "Referencing name",
up.table_name "Referencing table",
up.column_name "Referencing column"
from all_cons_columns up
join all_cons_columns r
using (owner, position), (select r.owner,
r.constraint_name fk,
r.table_name table_fk,
r.r_constraint_name r,
up.table_name table_r
from all_constraints up, all_constraints r
where r.r_owner = up.owner
and r.r_constraint_name = up.constraint_name
and up.constraint_type in ('P', 'U')
and r.constraint_type = 'R'
and r.owner = 'OWNERNAME') aux
where r.constraint_name = aux.fk
and r.table_name = aux.table_fk
and up.constraint_name = aux.r
and up.table_name = aux.table_r;
-- + Dynamic SQL
If anyone has any suggestions and / or reuse code to me thank you very much!
After resolving this standoff intend to mount the inserts in utl_file by a table and create another program to read and play in the development environment.
Thinking...
Let's Share!
My thanks in advance,
Philips

Thanks, Peter.
Well, I am working with release 9.2.0.8.0. But the planning is migrate to 10g this year. So my questions are:
With Data Pump can export data just from tables owned for me (SCHEMAS = MYOWNER) parameterizing the volume of data (SAMPLE) and filters to table (QUERY), right? But parameterizing a contract table QUERY = "WHERE status NOT IN (2,6) ORDER BY contract ":
1º- the Data Pump automatically searches for related data in other tables in the owner? ex. parcel table has X records related (fk) with Y contracts not in (2,6): X * SAMPLE records will be randomly exported?
2º- for the tables without relation (fk) and which are within the owner (MYOWNER) the data is exported only based on the parameter SAMPLE?
Once again, thank you,
Philips
Reading Oracle Docs...

Blocking some data in MSA with AMT help

Similar Messages

Maybe you are looking for