Blocking spam and email addresses

Is it possible to block a specific email address?

What exact rule did you set up?
Like...
If From Contains [email protected], then...
Move to Trash... or Delete message?

Similar Messages

Need to blacklist (block) a large number of domains and email addresses

I tried to import a large number of domains into a transport rule (new/set-transportrule -name xxx -domainis $csv -quarantine $true).
I added a few domains manually and tested to make sure the rule was working. It was. Then I ran the cmdlet to import a small number of domains (4). That also worked. Then I ran the cmdlet on a large number of domains. The cmdlet
worked with no error message (once I got the list of domains well under 4096 bytes). I waited a day to see if the domains would show up in the rule. But the imported domains did not show up.
Is there a better solution to blocking large numbers of domains and email addresses? Or is the transport rule the only option?

Since you do not want to crop your images to a square 1:1 aspect ratio changing the canvas to be square will not make your images square they will retain their Aspect Ratio and image size will be changer to fit within your 1020 px square. There will be a border or borders on a side or two borders on opposite sides. You do not need a script because Photoshop ships with a Plug-in script to be used in Actions. What is good about Plugins is the support Actions. When you record the action the plug-in during action recording records the setting you use in its dialog into the actions step. When the Action is played the Plug-in use the recorded setting an bypasses displaying its dialog. So the Action can be Batch. The Action you would record would have two Steps. Step 1 menu File>Automate>Fit Image... in the Fit Image dialog enter 1020 in the width and height fields. Step 2 Canvas size enter 1020 pixels in width and height not relative leave the anchor point centered it you want even borders on two sides set color to white in the canvas size dialog. You can batch the action.
The above script will also work. Its squares the document then re-sizes to 1020x1020 the action re-sizes the image to fit with in an area 1020 x 1020 then add any missing canvas. The script like the action only process one image so it would also need to be batched. Record the script into and action and batch the action. As the author wrote. The script re size canvas did not specify an anchor point so the default center anchor point is uses like the action canvas will be added to two sides.

Script to extract names and email addresses of all recipients of an email

Hi,
I have found some scripts which extract email addresses from the content of messages in Mail, but I am looking for something rather different, and wonder if such a script exists, or if someone can help me build one. I would like to create a tab delimited text file of the first name, last name and email address of all recipients of a given message in Mail. Most email addresses will be in the format John Doe <[email protected]>.
Thanks,
Nick

Hi,
nick_harambee wrote:
I have one outstanding issue, which wasn't included in the original question. Sometimes email addresses are included in the Name of the recipient, i.e. instead of 'John Doe', it reads 'John Doe ([email protected])'. Could you script be adapted to delete any block of text (i.e. space delimited) that includes the @ symbol, so that 'John Doe ([email protected])' would return:
John<tab>Doe<tab>[email protected]
Use this handler:
on splitName(t)
    if "@" is in t then -- to remove the address after the name
        set n to -3
    else
        set n to -2 -- normal name
    end if
    set tid to text item delimiters
    set text item delimiters to space
    set l to text items of t
    if (count l) = 1 then -- no space
        set r to tab & t & tab -- last name only
    else
        tell l to set r to "" & (items 1 thru n) & tab & (item (n + 1)) & tab
    end if
    set text item delimiters to tid
    return r
end splitName

Blocking an unwanted email address

does anyone know if you can specifically block someone's email address so they know you have blocked them? I realize that the "bounce" allows you to, but I would like to do it permanently, or at least until I choose otherwise. Thanks.

MKurpier:
Although Apple Mail does not allow you to block senders, you can log into your ISP's webmail account and you can often do it there. That is actually the portal for incoming mail. However, it can be an exercise in frustration, as they often change their address sufficiently to get by the blocking software. But if you make a point of doing it regularly you are able to eliminate a few over time. I have one email address where this is a constant problem, while other addresses with the same provider get no junkmail at all. I may just end up changing that email address.
cornelius

How do I change my username and email address?

I am unable to find where to change my iTunes Store username and email address. There's nowhere on this site to be able to change it. Can I only change it through iTunes?

You can edit your Apple ID(which is your iTunes Store account name) via Apple's My Apple ID website https://appleid.apple.com/com by following these steps:
1.) Click "Manage your account" on the right hand side of the page.
2.) Click edit next to your Apple ID and Primary Email Address.
3.) Edit your account name to the desired email address.
4.) Click Save Changes.
Hope this helps.

How do I change password and email address?

I cannot change my password and email address because I am based in the UK and not in the US. When I try to make a change and save it, it says I have made a mistake on the fields marked red and asks me to complete the parts in red including: the state I live in and because I am not in a state it doesn't allow me to change my details. It also has a problem with my country's telephone code. Does anyone know how to resolve this?

https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/

Can I sync two iPads with different users and email addresses on the same computer

Can I sync two IPads with different users and email addresses on the same computer.

yes, just make sure you turn off auto-sync to keep everything organized before you try syncing
on a pc
edit > preferences > devices - 'prevent ipads, iphones, and ipods from syncing automatically' needs to be checked

TS2755 My husband and I have iPhone 4S's. For some reason, my text messages show up on his phone. We share the Apple ID, and my settings are such that I send and receive from my phone number and email address. How do we correct this?

My husband and I both have iphone 4S's and for some reason he gets my text conversations w/ other people. We share the apple ID and I have my settings set to and from my phone # and email address. He is getting tired of being apart of text messages I am on. How do we remedy this?

Each of you need to have your own apple id's instead of sharing is the best way. But you can go to each phones settings, messages, send and recieve, and down to start new conversation from, and make sure each of you have your own email address with a check mark beside of it not the same address.

How can I send an email to a group in my address book, but hide the individual names and email addresses?

how can I send an email to a group in my address book, but hide the individual names and email addresses?

You used to be able to do this through leaving unchecked the box in preferences "when sending to a group show all member addresses". However, that feature failed some time ago (two or three years?) and the only way to hide the addresses now is to put the group in the BCC field.

Can I share my books on iPad with someone in family that has a different computer and email address

Can I share my books on iPad with someone in family that has a different computer and email address

If you got them from iBooks, then no. As far as I know, iBooks are linked to the Apple ID that downloaded them. If you got them via Kindle or the such, the apps may have a sharing function.
If it's another app, then whatever the rules of that app says is what works.
If you're looking for e-books on a budget, check out your local library. Many have e-books you can check out for a period of time, and they either work with an app or are PDF files with some sort of time limit encoding in them

How to email a list of names and email addresses?

I have a group of about 60 people with various amounts of data in each of their Address records.
I want to send an email to the group with a list of the names and email addresses of everyone on the list. I don't know how to do this neatly. Got any ideas?
If I put the group name in "to" in Mail, each person gets a messy non-alphabetical list with commas. If I send a group vCard, I send more data than I want to send. If I make a printed list, I have to convert to a pdf file and send that which is not nearly a simple as a text list.
Is there any way to export fields of my choice from Address into either text or spreadsheet format?
I want to send a list like this, but with tabbed columns.
Steve Jobs [email protected]
Barack Obama [email protected]
yourname1 yourname2 [email protected]
Thanks,
Phil

Thanks, Thomas for the prompt response, but the pdf method has two problems.
First, it's got to be in landscape mode, or the email address word-wrap. That makes for a five-page list. I want to send a 60-line text list.
Secondly, there's no way to eliminate the label (work, home, other...) from the email address field.
I will use the pdf method if no one comes up with a better idea.

How to setup the From header in fullname and email address format

when I sent mail from the messaging express , the mail that I sent cannot show the sender in the fullname and email address format. I use webmail and other mail client . It show only email address. I don't know how to setup this . I use the SUN JES messaging server 6.0 SP1 .

exactly so.
in general, for any configutil setting:
0=off=no
1=yes=on

Why are url and email addresses not fully viewable in a PDF when generated from a Word file?

I have a question?
A colleague in our Copenhagen office wanted to generate a pdf from a Word file. She is working on a Windows 2007 operating system and is running Acrobat Pro 9. When she generated the PDF only part of a url and an email address was visible when the PDF was viewed. She was wofking from Standard settings. I am running the same software on the same Windows platform and using the same computer equipment with the same settings yet I was able to generate a PDF where the full url and email address was visible.
Can anyone out in Adobe Acrobat land provide me with an answer?
Patrick Lennon

That's probably because the Mac people are opening or viewing the PDFs within the Mac's "Mail" program or with the "Preview" program and not with Acrobat.
Since the Windows people aren't using these programs and most likely just Acrobat or Adobe Reader, the layers are kept hidden.
I'm afraid the only way to truly keep those layers hidden is to delete them before saving your file as a PDF. (Of course, do a "Save As" and keep your original .ai file intact.

I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?

I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?

This may help.
Can't connect to the iTunes Store
What happens whenyou try to connect? Error messages?

How to show users display name and email address in open social widget?

Hello experts,
Is it possible to retrieve users display name and email address with opensocial javascript e.g. Login widget seems to load user data (and userData.firstname) during the site init. Is this something that could be consumed or is there some opensocial data request that could/should be used. Any working sample widget spec would be appreciated.
Best regards,
Ville

Hi Ville,
in the logon widget, we also use the data retrevied from siteInit.loadData.data.user. However, this widget is part of the out of the box openSocial widgets, it is being released with the product code, not as a separate OS widget deployed on HANA Cloud Platform.
If you'll do window.parent.siteInit you'll probably will get the data you are looking for, but this isn't the official public API, so you can use it but we cannot commit on keeping this structure.
Why do you need this information in the widget level? Does your widget require authentication or is it for personalization needs?
The best way is to retrieve this info on the java side using HAHA Cloud Platform APIs and send them back to the client.
Look at this - SAP HANA Cloud Platform SDK >
Package com.sap.security.um.user
Interface:
User
This interface provides read access to user data and is an extension of Principal.
UserAttribute
The interface represents abstraction over a user general attribute, such as an e-mail address.
UserProvider
This interface represents the service interface which provides read access to a user implementation.
Inbal

Blocking spam and email addresses

Similar Messages

Maybe you are looking for