Blocking the Instrument in use during calibration

Hi Masters
   Is there any possibility to block the instrument in use which is under calibration in SAP?
-Mohan

Hi
Do you means the Inspection lot is generated for a Equipment which is under calibration ,then there is no std SAP function which will block equipment automatically after you take UD of the calibration lot.
But
You can always go to IE02->equipment>functions-->either Deactivate the Equipment or put deletion flag.
Also you can create User status for Equipments like
CALB Calibrated
UNRP Under rapaire
NIU  Not in Use
etc
SO that equipment will not be scheduled again.
I hope this will add some value.  
Regards
Sujit

Similar Messages

  • Any way to find out where the tablespace being used during a timeframe

    Hi All,
    I have a very generic question:
    We have a daily report for tablespaces info in our production env. In has 30.97% free space in a tablespace on 6/27/2009. On 6/28/2009 it reported only has 1.53% free. I would like to know which segments all the space went during this time period. I looked in the dba_extents but could not see any time related info which tells me when the extents be allocated. Can anybody share this info with me?
    Thanks a lot for your help in advance!
    Shirley

    What version of Oracle? What edition? Are you licensed to use AWR functionality?
    If you are on 10.1 or later, use the enterprise edition, and are licensed to use AWR (which generally requires the Diagnostics & Tuning pack), you should be able to query DBA_HIST_SEG_STAT (the SPACE_ALLOCATED_TOTAL and DELTA columns as well as the SPACEUSED_TOTAL and _DELTA columns).
    Justin
    Edited by: Justin Cave on Jun 29, 2009 12:36 PM

  • Using during calibration

    After your MBP goes into deep sleep for the 5 or more hours and you recharge it, can you use it while it is recharging.
    I am planning on leaving my MBP on in no sleep mode when I go to bed and then in the morning I need it for work. It will be probably be off for 6 to 8 hours depending on how long it takes to discharge. Any help will be appreciated. Any advice?

    Worked, had I tunes open, youtube, wifi, got about 1:40 of battery life out of it. It said 2:55 when I first started it after the charge. Had it on bright with Safari running. When I woke it up after 8 hours of deep sleep it said 1:05 to charge. Hope it worked. This was an inherited machine and don't know if the person before ever did a calibration. Hoping so. It has been on for 20 minutes or so and here is the info.
    Model Information:
    Serial Number: Sony-ASMB012-38a8-632f
    Manufacturer: Sony
    Device name: ASMB012
    Pack Lot Code: 0000
    PCB Lot Code: 0000
    Firmware Version: 0110
    Hardware Revision: 0500
    Cell Revision: 0303
    Charge Information:
    Charge remaining (mAh): 2693
    Fully charged: No
    Charging: Yes
    Full charge capacity (mAh): 5191
    Health Information:
    Cycle count: 99
    Condition: Good
    Battery Installed: Yes
    Amperage (mA): 2558
    Voltage (mV): 12227

  • How to find the serial number used during Goods receipt

    Hi ,
    Have used  serial numbers whle doing GR, but cannot find the table where the serila numbers are stored.
    table ser01 contains the material document and the serialization procedure. I want to find a table where the serial numbers that I have used for the GR, are store. I want to retrieve them and send them in an interface.
    Rgds
    Sumendra

    Hi
    Function Module GET_SERNOS_OF_DOCUMENT can be used to retrieve serial numbers corresponding to any of the following documents.
    Material document
    Physical Inventory document
    Import parameters:
    Input parameters which needs to be passed changes based on the type of document.
    Following are required fields to be passed as input parameters to get respective document  serial numbers
    3. Material document
    KEYDATA-TASER  = 'SER03'
    KEYDATA-MBLNR  - Material Document
    KEYDATA-MJAHR   - Material Document Year (optional)
    KEYDATA-ZEILE     - Item of Material document(optional)
    7. Physical Inventory document
    KEYDATA-TASER  = 'SER07'
    KEYDATA-IBLNR -Physical Inventory document
    Output table:
    Serial Number details are retreived in the following table
    SERNOS
    Serial numbers can be extracted from field SERNOS-SERNR
    regards
    Prashanth
    Edited by: Prashanth@SD on Nov 3, 2010 6:20 AM

  • My iPod Classic has been stolen - can Apple block the thief from using it?

    My iPod Classic has been stolen. Can Apple stop the thief from downloading new tunes to it?

    No.
    (121028)

  • When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get

    When I attempt to apply a lens profile in the Develop module the only choices are for the Fujifilm X100/S/T even though in the Library module the EXIF data correctly shows the camera as the X-T1 and the precise lens used to take the picture. How do I get the right profile available?

    First, the required profile needs to be present. LR 5.4 supports the X-T1 in terms of understanding its Raw format, but will not come with a profile for every lens which can be mounted onto that.
    A profile is made for each specific lens, as mounted on a certain camera. It can also be used with pictures taken on a different (reasonably similar) camera body than the one originally used during profiling. This is subject to the sensor format: you can employ a given lens profile made for full frame, on an image from a crop sensor behind the same lens - but not vice versa.
    Next, the image type needs to correspond to the image type which has been built into the profile: Raw, or non-Raw.
    Lightroom offers only profiles of the right type for the image(s) concerned. There are many more provided for correcting camera Raw, than for correcting camera JPG. That is also the case with additional profiles, e.g. those accessed via the Adobe lens profile downloader utility.
    Finally, in the event that there simply is no profile out there for a given lens, it is not particularly difficult (though a little tedious) for the end user to generate one, using a further Adobe utility which is downloadable as a package, including a range of checkerboard calibration targets, each of which needs to be printed at a stated physical size.

  • HT1338 is the garageband, iPhoto,iMovie update free, as I have purchase mac book pro last december, I am unable to update it says "To update this application, sign in to the account you used to purchase it

    is the garageband, iPhoto,iMovie update free, as I have purchase mac book pro last december, I am unable to update it from app store. When I try to do so it says "To update this application, sign in to the account you used to purchase it"
    I have apple ID but after signing into that account too, it does't allow to update. None of the updates for these application are show in software update of late, but it flashes in the dock where app store is . Kindly suggest.

    Should be the account you registered your mac with, and/or the account you used during the setup assistant.

  • Got a new Mac Book Pro for school. Go to update all the hardware and software do not have any problems until i get to "iMovie" and "iPhoto" (they came pre-loaded) and i get "To update this application, sign in to the account you used to purchase it." help

    Does any one know how to fix this problem?

    Should be the account you registered your mac with, and/or the account you used during the setup assistant.

  • Blocking the work center

    Dears
    Is it possible to block the work center from Quality department for creating any more production order because of quality issue
    Like what we are blocking the vendor by using quality info record
    Thanks in advance
    Faisal

    Yes Sujit
    I understand that
    But There is any method to evaluate Work center in QM prospective
    In usge decision we have quality score is updating when ever we select respective UD code
    Any tips on this pls
    Faisal

  • How do I find out which instruments are used by software instrument loops?

    This isn't so much a problem, it's just something that's been bugging me - how do I find out which instruments are used by the software instrument loops?
    Usually clicking on a track will bring up the instrument name in the track info pane, but if I do this after importing a software instrument loop into my song it doesn't show anything. Any ideas?
    PS I have used the search function so I apologise in advance if there's an obvious answer.

    in track info, under details, the instrument being used is displayed in the generator popUp menu

  • Block Project Purchase Requisition using User Status

    Dear All,
    We need a copy of TECO, we tried to create a new status using BS22 transaction but its totally new activity of creating the system status. This transaction does not allow to copy an existing status. is there any other way to do so
    We alos tried to block the Purchase Requisition using user status, but its not working. Please guide
    Thanks in advance.
    Murtaza

    Yes, you are right I need the said status for WBS Element. I have assigned it to relevant WBS Elements but not working.
    Let me explain the scenario little more, there are activities having commitments (Purchase Requisitions), we need to process the existing PRs but new commitments must be blocked. we need to use status on WBSE to control it so that if we need to re-open the new commitments, we can do it by disabling the status.
    Murtaza

  • Blocking the change of Supplier Invoice Number on update using SP

    Hi Mentors,
    Just wondering if blocking the change of Supplier Invoice No. (OPCH.NumAtCard) is possible using SP_TransactionNotification?
    I've been trying to make it work with the following code:
    --Prevent Duplicate Supplier Ref. No. in AP Invoice
    if @object_type = '18' and (@transaction_type in ('A' ,'U'))
    begin
    declare @RefNo as varchar (100)
    declare @CardCode as varchar (100)
         if (@object_type = '18')
              begin
                 select @RefNo = NumAtCard, @CardCode = CardCode from OPCH T0 where docentry = @list_of_cols_Val_tab_del
                 begin
                   if (@RefNo is not null)
                     begin
                       if 1!= (select count (docentry) from OPCH  where (NumatCard = @RefNo) and (cardcode = @CardCode))
                         begin
                            select @error = 10
                            select @error_message = 'Duplicate Supplier Reference Number!'
                         End
                       End
                   End
              End
    End
    --Prevent Supplier Ref. No. in AP Invoice from being changed during update mode.
    if @object_type = '18' and (@transaction_type = 'U')
    begin
    declare @DocEntry as int
         if (@object_type = '18')
              begin
                 select @RefNo = NumAtCard, @CardCode = CardCode , @DocEntry = DocEntry from OPCH T0 where DocEntry = @list_of_cols_Val_tab_del
                 begin  
                       if (@RefNo != (select NumAtCard from OPCH where (CardCode = @CardCode) and (DocEntry = @DocEntry)))
                         begin
                            select @error = 10
                            select @error_message = 'Changing of Supplier Reference Number is not allowed!'
                         End
                       End
              End
    End
    I'm not sure if this is really possible,and that I could be just beating the wind by trying.
    Thanks in advance!
    Sean

    To avoid modifiing the vandor reference use this:
    IF @Object_type = N'18' and @transaction_type = N'U'
    BEGIN     ---
    declare @li int
    declare @pref nvarchar(100)
    set @li=
    (select max(t.LogInstanc)   from ADOC t
       where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del)
    set @pref=
    (select isnull(t.NumAtCard,'')    from ADOC t
        where t.ObjType=18 and t.DocEntry=@list_of_cols_val_tab_del
          and t.LogInstanc=@li-1)
    If @pref !='' and @pref !=
    (select isnull(t.NumAtCard,'')   from OPCH t
       where t.DocEntry=@list_of_cols_val_tab_del)
    Select @error = 10, @error_message = N'Changing of Supplier Reference Number is not allowed!'
    END     
    --- To avoid using duplicated reference try this:
    if @object_type = '18' and @transaction_type in (N'A', N'U') -- AP invoice
    BEGIN          ----
    declare @Invoice AS VARCHAR(15)
    declare @Card AS VarChar (20)
    SELECT @invoice = NumatCard, @card = CardCode FROM dbo.OPCH
         WHERE DocEntry = @list_of_cols_val_tab_del
    If exists (SELECT T0.cardcode, T0.NumatCard FROM OPCH T0 where T0.NumatCard = @invoice
               and T0.CardCode=@card and T0.DocEntry!=@list_of_cols_val_tab_del)
    Select error = 10, @error_message = N'Duplicate Supplier Reference Number!'
    END          ----

  • Issue in FF v 3.6.10: I have a page which have more than 20 link, clicking on these link opens up a popup using window.showModalDialog, for the first 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open.

    Issue in FF v 3.6.10: I have a web page which have more than 20 link, clicking on each of these link opens up a pop-up using window.showModalDialog, for the first consecutive 20 popup opens up without any prob but for the 21st n more click it block the popup and do not open. This is m problem, the real user on the web page can click on more than 20 link in such a scenario it may create problem, please help

    Your above posted system details show outdated plugin(s) with known security and stability risks.
    *Shockwave Flash 9.0 r999
    Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/
    In Firefox 3.6 and later versions you need the Next-Generation Java™ Plug-In present in Java 6 U10 and later (Linux: libnpjp2.so; Windows: npjp2.dll).
    http://java.com/en/download/faq/firefox_newplugin.xml
    See also http://java.sun.com/javase/6/webnotes/install/jre/manual-plugin-install-linux.html

  • I want to be able to totally block the FaceTime functionality in my home network.  I would like to do this at the router level.  Does anyone know the hostname or IP address that the FaceTime application uses? Or which port it connects to?

    I want to be able to totally block the FaceTime functionality in my home network so my 4 kids aren't using the Facetime feature- It was easy for Skype just had to enter the work Skype on my Router Security list- and it denies access. I would like to do this at the router level for FaceTime? Only site I find in init.ess.apple.com - is this the startup site for Facetime?   Does anyone know a site I can block, hostname or IP address that the FaceTime application uses? Or which port it connects to?

    I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open.  Good luck!

  • Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?

    Does anyone know how to display (in LabVIEW) the memory use during execution of an image and data acquisition VI to predict when it is time to cease the acquisition to prevent the program crashing?
    I am acquiring images and data to a buffer on the edge of the while loop, and am finding that the crashing of the program is unpredictable, but almost always due to a memory saturation when the buffers gets too big.
    I have attached the VI.
    Thanks for the help
    Attachments:
    new_control_and_acquisition_program.vi ‏946 KB

    Take a look at this document that discusses how to monitor IMAQ memory usage:
    http://digital.ni.com/public.nsf/websearch/8C6E405861C60DE786256DB400755957
    Hope this helps -
    Julie

Maybe you are looking for