Blocking the Storage Locations from Delivery

Hi
We have maintained for a plant different Storage locations like FG-Store,PRD-Store,WIP-Store etc
If the same material exist in the FG-Store ,PRD-Store
Can i restrict the Delivery to Happen only from FG Store & not from PRD-Store ?
What is the config required for it?
Regards
AK
Edited by: Ajithk on Jun 15, 2010 1:46 PM

Hi,
Please check the path
SPRO-->MATERIAL MANAGEMENT->INVENTORY MANAGEMENT & PHYSICAL INVENTORY-->AUTHORISATION MANAGEMENT->AUTHORISATION CHECK FOR THE STORAGE LOCATION
In that choose your plant and storage location and activate the AUTHORISATION
and it maintain the authorisation profiles for the object M_MSEG_LGO and you can't create a goods mvoement from this storage location.
Please try this and revert
regards,
santosh

Similar Messages

Function module does not update the storage location in delivery

Hello,
I've been trying to use SD_DELIVERY_UPDATE_PICKING to update the storage location in SD return deliveries, without any success. Any clues? The FM works fine when it comes to updating the picking quantity, but the storage location issue still persists.
Thanks in advance,
Joao

Hi Joao,
I have the same problem. I tried to find the FM SD_OUTB_DELIVERY_CHANGE but couldn't find it. Have you by any change specified the incorrect FM name here? If yes, can you please communicate the correct FM name?
Regards,
Divyaman

Default Storage location from the Material master

Can we default the storage location from the material master into the reservation line item in trasaction MB21?

enter the production storage location in material master MRP2 view.
Edited by: Jürgen L. on May 7, 2008 6:52 PM

Table for storage location from MIGO in the index "where"

Hi,
I would like to know the in which table is saved the storage location.
I would like to take the storage location from MIGO in the tab index Where.
Thanks.
Dede

Hi Glen,
If I got it right... You want table MSEG for movement (table T001L for Sto. Location master - tcode OX09).
Cheers.

VL10B - change Storage location for delivery

Hi all,
I have a requirement wherin, for the deliveries created for purchase orders, the storage location needs to be defaulted from the production order. The configuration of picking has only one stloc for my plant, but we have the same amterial stored at 2 storage locations. In the config we cannot maintain both stlocs for 1 plant. So I need to see if I can do an exit wherin I can read my production order and pick the storage location from there and post it on the delivery. Cn anyone help?

hi Roy,
solved this by finding a BADI under Shipping of deliveries which has a SAVE_DOCU_PREPARE interface taht can be triggered toi change storage location/
Thanks for ur help.
Problem solved.

Replicating storage locations from SAP SRM

Dear Experts,
How to replicate the storage locations from ECC to SAP SRM? How you can restrict the selection of storage location in SAP SRM based on the plant selection? i.e. plant 1000 has three storage locations say 1001, 1002, 1003. Now, when the user selects the plant 1000 as delivery address in direct procurement scenario, then the system should allow only the three values in value help?
Thanks and regards,
Ranjan

HI Ranjan,
Did you try by removing 'Storage Locations" from Extended Attributes in PPOMA_BBP?
thanks,
Rahul Mandale

Blocking a Storage LOcation

HI All,
How to block a storage Location from day to day transaction. What transaction is used for that?

Hi
You can flag all materials for deletion at this storage location level.
Set the message to error so that you will not be able to post any movements with this storage location for the alredy extended materials.
If you do not want any new material to be extended to this storage location then you can use MGA00001 user exit to do the check & issue error message.
Regards,
Manish

Restrict certain Storage location from getting displayed in CO06 !!

Dear all -
We have implemented ECC 6 recently & I have a doubt about restricting certain Storage Locations
in CO06.
I have 2 storage locations for a plant and would like to restrict it in CO06 one of the storage locations.
Is there any other way by which I can RESTRICT certain storage locations from getting displayed.
I am putting in Logistics Execution threat, with an anticipation thall ALL logistics module experts will be able to see this and respond.
Thanks
Arun
Edited by: ARUN TULSI on Jun 25, 2008 10:14 AM

Dear,
System determine issue storage location from the material master, the value of the storage location of the BOM item, or the storage location from the supply area.
Check in BOM component details storage location you have defined.
Check production storage location from the plant segment of the component is taken into account for the use of MRP areas also. When planned order is being created for the superior assembly in a MRP area?
Also check the Material requirements planning (PP-MRP)
--> planning process
--> BOM explosion and dependent requirements determination
--> storage location determination for BOM explosion
Regards,
R.Brahmankar

How to get delivery address in STO for the storage location

Hi All,
We have to create STO from the reservation using MRP run. While system is creating the STO we need to populate the storage location address as delivery address (not the plant address ). How we can do that? what are teh settings required for this setup? please hlep in that.
Regrads,
Khan

Hello...
You can select the storage location in the line item itself which is adjecent to Plant for the line item.
Regards
Suresh

Delivery is to be done at the end user location not at the storage location

Hai Gurus.
I have a problem
I am working for a construction industry.. I had a storage location at say" X":. And in case of emergency for the material to the end user at different locations, delivery is to be done at the end user location not at the storage location.. Where to give the end user location address .As delivery address in PO item details will be plant address. pl help
regards
chandrasekhar

As i underdstand from your description of issue .You dont want to recive the material in the storage location of your main plant but you want to recive the goods directly to the end user from the vendor.This is typical scenario of Third party PO ..so kindly traise third part PO to vendor ..by changing the item category ...and so the delivery addfres popolutaed in ur PO will be directly from the ship to address from your sales order.rathewr than the storgae location you wd have specified in ur material master

Exclude stock at a storage location from the Productionn Planning run

Hi,
We have to exclude a storage location from the Production Planning run. We already implemented a user exit in CIF and changed the stock at the storage location to a category Z1 that is not relavant to SAP, but the stock at the location is still being consitered for production planning.
Please suggest a way so that it is excluded from the Production planning
Regards,
Sireesh

Hi Sireesh,
Please try these following options.
1) Filter this storage location in the programme /SAPAPO/RMSDPDEP by writing customised code with an abapper, so that it will drops the storage location stocks not getting planned during deployment
2) Try anyof these user exists
APOBP011 Enhancement for Stock BAPIs (BUS10504)
APOCF011 Inbound Processing: Stock
APOCF027 Customer-Specific Enhancements: Stock
3) Exclude the category from the ATD receipts category group maintained in the master data
Regards
R. Senthil Mareeswaran.

Make the Storage Location field in Grey mode in Delivery (picking Tab)

Hi Experts,
Pls suggest me to how make the storage location in Picking Tab of Delivery to Grey mode .
Regds
Rajiv

In tcode U have to enter Transaction code VL01N
Transaction variants field just Press F4 to get already buid transaction variant else u have to create the ur screen variant by clicking the button named Create in Below menu option .
If the variant already exist -> enter
u will get the data in the lower half of the screen , select the transaction Variant with field for storage location , generally datais distributed in delivry doc at header and item level so for storage location u have to take the one with item level data .
There u will find the all the fields which are there in Delivery doc at item level with check boxes in front of them please goto storage location field and check the check box saying output field ( This means this field will be display only) Save and try and create the delivery again.
This will be display only in VL01N

Inter company STPO delivery address showing the storage location address

Hi Guys,
While creating inter company STPO (different CC), the system showing delivery address is Storage location address, but i want to change plant address.
Please help me how i can do this...
Thanks in advance
Regards
Chandru.

then delete the storage location in the PO item line.
the storage location is the most detailed information in the PO, and it has an adress. If you procure to that storage location (that has a different address to your plant adress) then it is logic and makes a lot of sense that your supplier sends the goods to this location and not to an address where the material is not needed.

Exclude storage locations from the MRP run

Hi all,
Is it possible to exclude stock of specific storage location from the MRP run?
Thanks for your help
Thomas

Hi,
2 things,
1. In OMIR for the storage location set that this location is excluded from MRP run (if am right the value to be maintained is 1)
2. In MM02 go to MRP-4 view of the material master, specify plant & the storage location which you want to exclude & in the field SLoc MRP indicator specify that this is excluded for MRP run (if am right the indicator is 1).
The step 1 ensures that all materials which are extended to this storage location will by default have the value 1. And step 2 ensures the materials already having this storage location view are excluded from MRP run.
Regards,
Vivek

Maintained the storage location in MRPview2

Hi,
Though I have maintained storage location in MRP view2, while reversing the document from m.type 103 to 105 system is asking storage location in GR, then entered the storage location in GR, even though system is not allowing to post the GR because system is giving error message saying that inbound delivery storage location can not be changed to here.
We don not want to maintain the storage location in PO and Inbound delivery
We are creating inbound delivery in VL31N against the PO, after that posting the GR with m.type 103 once that is complete then will reverse the document from m.type 103 to 105 while reversing the document we are facing the above said problems.
Appreciate for your effective action.

Hi,
You have two queries:
1.You entered your required storage location in material master ,MRP2 screen to have Default storage location for external procurement, so that when you enter plant while creating the PO, this SL will be written automatically.This storage location nothing to with GR, during GR you need to enter your storage location.
2.While reversing the document you are facing the problems.
The movement types 103 is used for Goods receipt for purchase order into GR blocked stock & 105 is used for Release from GR blocked stock for purchase order.
But as you are reversing the document use 104 movement type instead of 105.
Regards,
Biju K

Blocking the Storage Locations from Delivery

Similar Messages

Maybe you are looking for