Blocks access to sites, says I have to "allow," so how do I fix this?

Above question should be sufficient. I want to stop this from happening. It began when I upgraded to 4.0. Trying to stop it I re-installed 3.6, but I still get this problem.
P.S. I don't much care for 4.0. I'm quite content with 3.6.

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address (you won't be able to add one until you can answer 2 of your questions) then see if this user tip helps : https://discussions.apple.com/docs/DOC-4551
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then try Apple ID Account Security
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57

Similar Messages

  • When I try to send email, I get an error message saying it doesn't allow relaying, how do I fix this

    When I try to send email from my ipad, I get a message stating it will be stored in outgoing because it was rejected due to relaying?  How do I fix this.  I don't even know what relaying is.

    Try going into Settings > Mail, Contacts, Calendars > select the account > account name , tap on SMTP (under the 'Outgoing Mail Server' heading) and then tap on your Primary Server and try entering your email account and password and see if it then works

  • TS1398 I just got I5 and when I tried to join my network it says it is not allowed?  How do I fix this?

    I got 15 and when I tried to join my wireless network it states I can not join any ideas?

    I assume your wifi network requires a password to join to it.  IF so enter the password when the phone asks for it when attempting to join the wifi network

  • I've been working on our church website and suddenly, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

    I've been working on our church website and all of a sudden this week, my computer will not connect to the site. I keep getting a message saying that the the connection to the server was reset while the page was loading. Does anyone have any ideas of how I can fix this?

    The "The connection was reset" error message can be caused by a bug fix for the BEAST (Browser Exploit Against SSL/TLS) attack that the server doesn't handle.
    *[[/questions/918127]]
    *[[/questions/918028]]

  • I made a mistake by saving a web page and moving it to ical on my mac air. now i can open ical but cant access it as it says i have a systems error . how do i fix it ?

    i made a mistake by saving a web page and moving it to ical on my mac air. now i can open ical but cant access it as it says i have a systems error . how do i fix it ?

    Changing body text is not simple. It's a desperate last resort. You need to buy the exact font. Acrobat will not let you edit in a font you don't own. Even then, it's undertain. Consider preparing an overlay in InDesign.

  • Im try to import a large amount of pictures to Iphoto. I have pleant of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

    Im trying to import a large amount of pictures to Iphoto. I have pleanty of space on my HD. But half way thru the transfer an error message comes up and says not enough disc space. How can I fix this?

    I. I want to import 58.64 GB of Photos from an external HD
    2. I have 278.28 GB space left on my HD
    3. The exact error message goes like this......
    Insufficient Disk Space
    iPhoto cannot import your photos because
    there is not enough free space on the
    volume containing your iPhoto library
    I Have researched this and most advice is to empty the iPhoto trash. I have already done this and it did not help.
    Thank you for helping

  • I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    I cant seem to download and install the latest iphone software update. I have tried since the release and have been unsuccessful on more than 7 occasions and lost all the data on the process. Anyone have that problem an how do I fix this problem?

    Hi
    Thanks but I have tried doing the above - when I said 7 times I was modest, its more like 15 times.
    And I am referring to the 5.1 software update. I dont have wifi so I guess I will have to try that seeing that my husband also has the same problem - he has also tried downloading several times. It always times out en says that the connection is lost but yet there are always an internet connection and a decent signal once it stopped. Think it said error 32052 or something!
    I am disappointed because the update includes inprovement on the battery life - did you guys notice any difference?

  • When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

    When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 7, how can i fix this?

    if your computer does not support the operating system you wish to install in bootcamp then you have to use a virtual machine like virtual box to install the operating system you wish to install

  • I bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    i bought a brand new 5th gen ipod touch. im trying to restore from itunes backup. then it says connect to itunes but my hp laptop is not syncing it. when i plug it in it does nothing but say connect to itunes... how do i fix this?

    Hey jtom234412,
    Thanks for the question. Based on the information you have provided, it sounds like your device is not detected in iTunes for Windows. The following resource may help resolve this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Furthermore, if your device is in recovery mode (displaying an iTunes symbol, with a plug), see the relevant information under Step 5.
    Thanks,
    Matt M.

  • TS3694 i have a problem 3194 how can i fix this white screen

    i have a problem 3194 how can i fix this white screen

    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes.
    Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw

  • I'm unable to open Safari.  I keep getting a alert security message Suspicious Activity Might Have been Detected. How can I fix this proplem?

    I'm unable to open Safari.  I keep getting a alert security message Suspicious Activity Might Have been Detected. How can I fix this problem?

    You may have installed the "VSearch" trojan. Remove it as follows.
    Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data before proceeding.
    Step 1
    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including any that have the word "Spigot," "Trovi," or "Conduit" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Reset the home page and default search engine in all the browsers, if it was changed.
    Step 2
    Triple-click anywhere in the line below on this page to select it:
    /Library/LaunchAgents/com.vsearch.agent.plist
    Right-click or control-click the line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item named "com.vsearch.agent.plist" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
    Repeat with each of these lines:
    /Library/LaunchDaemons/com.vsearch.daemon.plist
    /Library/LaunchDaemons/com.vsearch.helper.plist
    Restart the computer and empty the Trash. Then delete the following items in the same way:
    /Library/Application Support/VSearch
    /System/Library/Frameworks/VSearch.framework
    ~/Library/Internet Plug-Ins/ConduitNPAPIPlugin.plugin
    Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    The problem may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
    This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Internet criminal behind VSearch has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • On my iPad 2 I can nolonger view maps.  It says there are JavaScript errors.  How can I fix this problem?

    On my iPad 2 I can nolonger view maps.  It says there are JavaScript errors.  How can I fix this problem?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."

  • How do I get my hotmail to work on my ipad mail. It keeps saying unable to verify account information how do I fix this??

    How do I get my hotmail to work on my ipad mail. It keeps saying unable to verify account information how do I fix this??

    Hi there Robbonchelle20111,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/ts3899
    -Griff W. 

  • I rented a movie off of iTunes for my iPhone 5. My 24 hours are up but it is still trying to download the movie in my store downloads. It will finish downloading and say error and start over. How do I fix this?

    I rented a movie off of iTunes for my iPhone 5. My 24 hours are up but it is still trying to download the movie in my store downloads. It will finish downloading and say error and start over. How do I fix this?

    if u unplug then that could put ur device into recovery mode. i would wait

  • I have a really old Itunes account.  I no longer have the email and when I go to put in my birthday it is coming up wrong because the birthday on the account does not have a year.  How can I fix this?

    I have a really old Itunes account.  I no longer have the email and when I go to put in my birthday it is coming up wrong because the birthday on the account does not have a year.  How can I fix this?  I have about 70 downloaded songs on this log in that I would like to get back.
    Thank you in advance.

    Contact iTunes customer support.

Maybe you are looking for

  • How to set up Hotmail on E71

    Hi all. I have a nokia E71 and cant set up my hotmail account. I have been into store and on the phone to vodafone for 2 hours and they couldt even help. I want phone to ping when i get an email. i have also upgrades my account to Hotmail live plus t

  • Setting Up an External HD so that It Can Be Accessed Wirelessly From My Mac

    I have a 6 month old MacBook Pro running Leopard 10.5.2, an external Maxtor 500 GB HD formatted for "MAC OS Extended (Journaled)" I am using for mainly for my iPhoto Library and a Western Digital My Studio 1 TB drive formatted for "Mac OS Extended (J

  • Windows 7 Update Error Code 80070005

    I've been trying to update windows 7 for a while now. I've looked up every way possible, and every time i shutdown and tries to configure, it fails. then i check and see the error code 80070005. i know that this means that i dont have permission. im

  • Ipod Nano not connecting to PC

    I am having trouble getting my ipod to connect with my PC. It has worked previously, as i have transfered 3gb of songs to my Ipod Nano so far. However now when i try to connect my Ipod to my computer, i plug it in, and nothing happens. I can play wit

  • How to access and set the object attributes in a task flow?

    I have created a web service data control which has an operation having input as payload object. This payload object has two attributes min and max. I am calling a task flow in a dynamic region in which I want to display result of this operation for