Blocks in image

Does anyone know what might be causing this when I make an m2v from HD footage?
http://www.flickr.com/photos/70235619@N00/156309657/

If I remember correctly, you've attempted the QT reinstall already, and had no luck, right? I take it you've covered all the Apple-recommended Troubleshooting Basics beforehand?
And, since you mentioned (in that other thread, right?) that you installed over a previous installation of Compressor, be sure not to use any Compressor 1.x settings in Compressor 2.

Similar Messages

Block white images over colour background

Possibly a simple question, but I can't find referance about it anywhere.
I'm trying to place a block white image of hand-drawn text (saved as a psd or/and tiff file with layers so that the surround is transparent) into indesign CS4. Placed over the top of a solid red colour. However when I do this, the image becomes transparent and invisible on the page.
I've also attempted to do this by importing a greyscale black version (in tiff format), and then converting the colour to either paper, or a white. But with no luck. This could be because indesign treats paper colour or white as transparent, but is there any way to get around this short of changing the image to bitmap and losing quality?

Should work fine with a psd file, strange... Try this:
Check if you have a clipping path into your file
if not:
- open you image in Photoshop
- select all you image (Ctrl+A or Cmd+A)
- Create a new document with transparent background (it should have the size of what you just copied)
- go back to your first image and with the magic wand select what will be white
- go back to the new doc,and paste
- Save to PSD file, do not forget to tick the add layers feature, eventually remove the profile if there is one
IN Indesign, import you file. you shouldn't have to modify your image to get what you want
Other idea (kind of old-fashionned but good trick)
-make your image negative with Ctrl or Cmd + I (black text, white background), you can then flatten the whole thing
-Convert your grey image to bitmap (1bit) with Threshold 50%
-save to tiff
In indesign, import the file, select you image unelect you rimage select it again with the white arrow then change the color to "paper" of whatever color you want.

My ipad 2 is blocked to image usb in itunes after sincronitation

my ipad 2 after sincronitation in blocked with image of usb direct to itunes logo. i have new installed i tunes. no changes

iPad: Unable to update or restore
http://support.apple.com/kb/HT4097

I blocked some images from myspace by mistake. How can I unblock them?

I play a my space app called Hotties For Sale. I inadvertently blocked some images from the app. This includes operating buttons and some photos. The only info I can find is "Block images from x.myspacecdn.co... How do I get these images back? Can you help please?

With myspace on display, click on the site identity button (for details on what that is see the [[site identity button]] article) and then on More Information. This will open up the page info dialog.
First select the Permissions panel, make sure that "Load Images" is set to allow (selecting Use Default should also work)
Next select the Media panel, then click on the first item in the list. Use the down arrow key to scroll through the list. If any item has the option "Block images from (domain name)" selected, de-select the option.
This should hopefully resolve your issue, but also see [[Images or animations do not show]].
Some add-ons can also block images, for example if you have AdBlock Plus installed, make sure that you have not accidentally created a filter to block the images.

Weird blocks on image after using adjustment brush in ACR

A group of people took an online webinar yesterday. The instructor is a heavy Adjustment Brush user, in LightRoom. After taking the class, many of the students in the group are reporting the appearance of weird blocks on images, after using the Adjustment Brush - both in LR and in ACR. It is also happening to me. I am a heavy Photoshop and ACR user - never before have I seen this. The only thing I'm doing differently is using the Adjustment Brush (because of the webinar class, as it was part of the instructor's core teachings). What could be causing this?

There was an adjustment brush bug in older versions of ACR. I first reported it here, and Eric Chan acknowledged the problem. It went away in future releases. Sorry, I can't remember what version numbers were involved.
http://forums.adobe.com/thread/928672
(see youtube demo)

I'm using FF 5 and tried using the block all images feature. It blocks all images, but also blocks all the images on sites I've specified NOT to block. Any way to fix this?

When I examine the page info it lists it as unblocked/allowed for images, but it's still not showing any. It's ignoring any exceptions I list.
Macbook Pro 3,1, Leopard 10.5.8

You do not specify whether to block or show a specific image.<br />
You specify a domain when you block an image and all images from that domain are blocked.<br />
You can't use this to block a specific image.
You can look at Adblock Plus.
* Adblock Plus: https://addons.mozilla.org/firefox/addon/adblock-plus/
You need to subscribe to a Filter list (e.g. the EasyList).
* http://adblockplus.org/en/subscriptions
* http://adblockplus.org/en/getting_started

Text block as image -- should I care?

It was pointed out to me that most of the text on my site is an image, rather than lines of text. All of the text on my site was typed onto the site into text blocks, and none of it was cut and pasted. I did use Garamond for the font.
A few threads have covered this topic, which I have read.
Two of those blocks of text-as-image are on my home page and the text in those blocks appears in Google (on the listing of the site on the first "search result" -- or whatever it is called -- page).
Doesn't this mean that the text in those "text-as-image blocks" (sorry for all the quote marks, but I don't know the real names of these things) are indeed searchable by google, even if they are images rather than lines of text?
I have tried cutting and pasting the text into TextEdit and then repasting the text back but that didn't solve the problem.
So:
1. Does any of this really matter to the search engines and the ability of people to find text on my pages? Or for some weird reason does the home page act differently than the other pages?
2. Does anyone have a consistent solution to this problem?
3. Is this something that Apple may think significant enough to have already fixed for the next version -- which I hope is out in a couple of months?
But mainly, should I even care?
Thanks!
Mark

1. Does any of this really matter to the search
engines and the ability of people to find text on my
pages? Or for some weird reason does the home page
act differently than the other pages?
No and no. It sounds like your page is already coming up in the search results...graphic or text? It doesn't matter.
2. Does anyone have a consistent solution to this
problem?
Not sure that it is a problem that needs fixing.
3. Is this something that Apple may think
significant enough to have already fixed for the next
version -- which I hope is out in a couple of
months?
Again, I doubt that Apple sees it as a problem. iWeb converts text into an image for a reason.... your happiness. Most people would probably want to have a webpage that looks the way it is supposed to look (the way they want it to look). Most people probably don't care about text converted to image as long as it looks the way they expect it to look. This is why iWeb does the text to graphic conversion....to ensure uniform and consistent rendering of the text on the page. I think many, many more people would be upset if iWeb allowed them to put different fonts and text effects on a page and then left it up to a browser to determine how those fonts and effects were to be rendered.
But mainly, should I even care?
I think in the grand scheme of things, you shouldn't care. But that's just my humble opinion.

Please confirm: More than 1 block of images per Journal page?

I seem to remember (in a Steve Jobs demo?) that more than one row of images with attached title and text could be placed on one Journal page, but I cannot find how to do this from the Aperture interface or its documentation. can someone confirm that this can be done?
eg: (all on page 1)
img1 img2
title
text block
img3 img4
another title
another text block
(btw, my analysis of the html templates would indicate that this is not possible because there can only be one rkid="pictureblock" table per page.)

Drag your first two images onto the page.
Click on the little '+T' button to add a new text block at the bottom, then move the mouse over the text box and you should see a button at the right side of it that toggles between text and title.
Click '+T' again to add your text block.
Drag new images onto the page, moving around near the bottom of the text box - when you see a horizontal green 'insert' line drop the images and they will form a new image block.
Lather, rinse, repeat. By the way, dropping images on a horizontal line will make a new group, on a vertical line will add to that group.
Ian

Blocks in Images

There is an issue when I develop an Image in LR6. Colored Spotlights are surroundet by blocks. In LR5 there is no problem with the same Image.

You'll need to post complete example that fails.
"Josh Hartwell" <[email protected]> wrote in message
news:c4s6jc$avc$[email protected]..
> anyone?
>

Mouseposition interactivity - blocked by image

Hi,
I'm using flash to build banners among other things. Today I experienced a problem with a banner with mouseposition interactivity. The expected interactivity was blocked by a transparent gif that lay on top of the banner and apparently was there to track and handle clicks. It's a ad component for Joomla called Ijoomla Ad Agency. There is no way to make the ad component work in another way.
Is there a way to track mousposition despite a blocking image and if so how would I do that?
//Morgan

Yeah, I know. The banner I mention uses mouseX and mouseY. I should have written that the actual swf works and is responding to mousemovements but not when theres an external image on top of the banner.
The ad system puts a transparent gif in front of all flashbanners. So that wehn you click it it's the image that gets the click. This technique seems to block falsh from listening to mouse movements.

Shattered image in cs6 like big blocks of image

shattered image in cs6 like big blocks of an image - link added
I have a problem with ps cs6 sometimes the image is shattered into small pieces, but ps itself looks normal. The problem accours more often when I use a second screen besides my macbook pro ( os 10.7) se link below. can anyone help please?
http://www.24x36.dk/24x36.dk/macproblem.html
my mac: os x 10,7 not 10.4 my processor is 2.2 Ghz Intel Core i7 memory 4GB 13333 Mhz DDR3
my extra screen dell u2410

Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x64
Operating System: Mac OS 10.7.5
System architecture: Intel CPU Family:6, Model:42, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading
Physical processor count: 4
Logical processor count: 8
Processor speed: 2200 MHz
Built-in memory: 4096 MB
Free memory: 551 MB
Memory available to Photoshop: 3149 MB
Memory used by Photoshop: 71 %
Image tile size: 1024K
Image cache levels: 4
OpenGL Drawing: Enabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: True.
OpenGL Allow Old GPUs: Not Detected.
OpenGL Version: 2.1 ATI-7.32.12
OpenCL Version:
Video Card Vendor: ATI Technologies Inc.
Video Card Renderer: ATI Radeon HD 6750M OpenGL Engine
Display: 1
Main Display
Display Depth:= 32
Display Bounds:= top: 0, left: 0, bottom: 900, right: 1440
Video Renderer ID: 16915206
Video Card Memory: 1012 MB
Video Rect Texture Size: 16384
Serial number: 92629941096025671753
Application folder: Macintosh HD:Applications:Adobe Photoshop CS6:
Photoshop scratch has async I/O enabled
Scratch volume(s):
Macintosh HD, 697,8G, 89,3G free
Required Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Adobe Photoshop CS6.app:Contents:Required:
Primary Plug-ins folder: Macintosh HD:Applications:Adobe Photoshop CS6:Plug-ins:
Additional Plug-ins folder: not set

Selecting multiple blocks of images

How do I select multiple blocks of sequential images in LR3?
In PSE 8 I used Ctrl and holding the left mouse button while dragging over the required images but this does not seem to work in LR3
Using Ctrl and /or Shift to select individual groups of images works in LR but is very slow when I want to select numerous groups of sequential images
Specifically I want to select the many groups of 3 to 10 sequential images showing each of my kids so that I can add the appropriate keyword(s).

Thanks - so the click and drag does not work..??
The Shift.Ctrl does work but the click/drag is much faster.
Cheers

Blocking html images in iPhone emails?

Anyone know how to get iPhone to block the html images in emails so that I don't broadcast to spammers that I was stupid enough to open their email junk?

There are no settings to control such a feature at this time. If you don't know who the email is from, don't open it.

Exporting block diagram image

Hi
I'm in the middle of writing a report that discusses the LabVIEW program I've been working on, I was wondering how I export an image of the block diagram and front panel to include in my report? I hoped it would simply be a case of copy and then paste into clip art or similar but LabVIEW only lets you copy individual objects.
Please help!

I prefer to simply get the FP and BD image using invoke nodes. The attached simple demo (LabVIEW 7.1) will ask for a VI, then create PNG images of the front panel and block diagram of any VI you select. The image of it's diagram below was just created with it.
Modify as needed!Message Edited by altenbach on 06-02-2005 05:54 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
GetVIImages_BD.png ‏9 KB
GetVIImages.vi ‏60 KB

How do you add signature block to images

I am switching from a PC platform to Mac and from Adobe to Aperture 3. In Adobe is it easy to add a Signature to a image file for (c) however I cannot seem to find the magic in Aperture to do this. I have found that a lot of things are so simple on the Mac platform that I may be missing something simple. Thanks

Vern, I'm guessing your desire to add a signature to a photo is actually a watermark? If so that is definately possibly. Unfortunately this is not as easy as it could be and I'm hopeful that Apple gets this feature updated at some point. Sooner rather than later would be nice. However, you can find out how you can accomplish this by going to the help tab in Aperture and type in Watermark. The toughest part of making this happen is that you have to have access to Photoshop or possible other programs that you can create a PNG file in. The PNG file is a graphic file that you make to add to each photo on export. This graphic file can be text or something graphic like a logo. The one I use is text based and looks like this: © 2011 Daniel J. Cox/NaturalExposures.com. This text was created in Photoshop and saved as a PNG file with a transparent background. All of this sounds fairly complicated which it is but it can be done. If you don't have Photoshop maybe someone else can offer advise on how to create a PNG without Photoshop. Once you get a PNG created then there is an option in the export window that lets you add the watermark. The tough p[art is getting the PNG.
I moved to Aperture from Lightroom myself and I've been mostly happy but creating watermarks in Aperture is not nearly as easy as it is in Lightroom. Hope this helps. You can see samples of the watermark on images in an Aperture web page at http://www.naturalexposures.com/private/gallery/resplendentquetzal/large-4.html

Time machine backup blocked; disc image sparse bundle needs ejecting

Team, I cannot backup to 2Tb time machine; error message as above. How do I 'eject' this disc image and what exactly is it?
Thanks
Nick B

OK, we fixed this for now with the simple, but common Mac way of
throwing something in the trash.
In this case it seems to be a temporary network connection to the remote Time Machine partition. When Time Machine balks, the icon for the temporary mount gets stuck on the Desktop. We threw it in the trash (unmounting it) and then Time Machine can resume.
Apple networking is annoying, but then on the other, it's easy. We lose printing in a similar way.
Anyway, although we seem to be OK, I'd like to understand this a bit better. I can see in the "/Volumes" folder (in Terminal) three Time Machine mounts, not one as I would have expected, and they all appear to point to the same place:
drwx------   9 root                   wheel 264   Jun 22 10:23 TM-2
drwx------   9 root                   wheel 264 Jun 22 10:23 TM-1
drwx------   9 MYUSERNAME staff   264 Jun 22 10:23 TM
On the remote machine, the disc TM appears only once.
If you look at the listing of all three, they are identical. What gives?
Is this a consequence of the fact that we are putting the time machine backups on a remote machine (that is not a Mac OS server). We have to mount the remote disc before Time Machine will run, but from that point it works perfectly -- or as perfectly as any mac networking thing seems to work.

Blocks in image

Similar Messages

Maybe you are looking for