Blocks of transparency and colour corrupting files.
Please help. When working on layered files in photoshop my image will suddenly be filled with blocks of transparency, copying of other portions of the images and random colour changes. basically the image goes crazy. At this point I loose what ever I have done since the last save. If I save the image then the file become corrupted and I loose all the work.
I am running 10.10.1 on a 2014 iMac with fully paid for version of the online photoshop cc2014
Could you please post a screenshot to illustrate the issue?
Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Is Photoshop fully updated?
What kinds are the Layers involved?
What have you done for general trouble-shooting so far?
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
Similar Messages
-
How to find and remove corrupted files?
Hi,
Can anyone give me some direction in locating and removing files that have been corrupted? I am trying to back up my system for the first time on time machine, and keep getting an error message. I visited an Apple store today for support and had them reformat my external drive. I am able to start the backup, but it quits and gives me an error message.
Thanks!fatchay wrote:
my HD needs to be repaired and that I have an invalid directory count. Is this why I can't backup?
Run Repair Disk: Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen select the language and click Continue> click on the Utilities Menu in the menu bar>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself). -
Transparency and colour question
Hello - I would like to mix colour in Flash using
transparency to create something like
this
(no interactivity required):
If I create Cyan, Magenta and Yellow movie clips and change
the Alpha transparency, obviously the whole colour becomes lighter
(and the layered colours don't merge well). Is there any simple way
to do this, preferably using transparency, although I am prepared
to accept this is not possible. I have tried using masks, but I may
be overcomplicating things and am unable to get my head around what
is required. I found a movie showing that
it
is doable.
Any ideas?Hello, you can achieve that by utilizing the blend mode in
Flash 8. If you create movie clips from the 3 items then apply a
multiply blend to each, you'll get what you're looking for. See my
example
here. -
Log and Transfer - Corrupt Files! please help.
I received a P2 card, however only half of it will transfer. I am able to preview the other files on the card, however when i drag them to the transfer queue they wont transfer and i get an error with the red stop symbol.
I think that the camera operator might have changed the recording setup in the camera from HD 720pn to HD 720p25 or HD 720p50 during shooting. Is there a way to save and transfer this media, and if so how?
any help is greatly appreciated. thanks
matt
Message was edited by: fleischmachttp://discussions.apple.com/thread.jspa?messageID=9274735#9274735
-
Path of the style and colour file in 10g
Hi all,
I need to be same colours and styles as default in 10g to maintain in 11g dashboads.for this task 10g style and colour default file is going to be paste at 11g.where is the path of that file ion 10g and where i have to place?if any one knows please send me the reply ASAP.
Thanks,
Nanda,Hi,
Please follow this for skin and style customization: http://www.oracle.com/technetwork/middleware/bi/customizing-oracle-biee-11g-176387.pdf
Thanks,
J -
What to do if Windows displays an "iTunes.exe - Corrupt File" message
Greetings fellow Podders, Resident Furball here...
It is about time that I produced a single post for all the chkdsk issues that we've been discussing since November 2004. The Apple KB article seems to cover the major points succinctly, but we need to address the more serious variations and flavours of the problem.
<hr>
What to do if Windows displays an "iTunes.exe - Corrupt File" message
Many users are coming across this seemingly distressing error message in Windows when connecting their iPods. As described in Apple KB Article 300554, the message reads:
iTunes: iTunes.exe - Corrupt File
The file or directory \iPod_Control\iTunes\????????? is corrupt and unreadable. Please run the Chkdsk utility.
and the ????????? can be anything (eg. sysinfo, Temp1, DeviceInfo etc.).
<hr>
Don't panic!
If you do see this, don't worry, and don't panic. Contrary to what the error message reads, this issue actually has very little to do with iTunes. The iPod_Control is the key to this - because this folder doesn't even exist in iTunes... it's on the iPod!
...so! Installing and uninstalling iTunes really won't do you much good at all... it's the iPod that needs attention.
<hr>
What's causing this error?
To be honest, we don't know. We saw a massive number of reports of this issue back in November 2004, because iPod Updater 2004-11-15 contained a firmware bug that corrupted iPod system files when the Pod entered Deep Sleep.
But this firmware bug was corrected in iPod Updater 2005-06-26.
Of late, we have seen a resurgence in chkdsk errors on Discussions. Some of these are caused by the old buggy firmware that people still have. Some of the errors are more serious and are hardware and operating system-related. But we have still to pin down the exact cause of this error.
<hr>
Okay, so what do I do if I see this error?
In short, as Apple have recommended in their KB article:
Restore your iPod, using the latest iPod Updater.
Follow the instructions carefully. Ensure that you download the iPod Updater. Ensure that you install it, and then ensure that you run it with the iPod connected and follow the prompts to the letter.
The broad majority of the errors are painlessly fixed this way. Of course, it does mean that your iPod will be wiped, so make sure that you have your music/data backed up, and/or present in iTunes so you can resynchronise it when you have finished Restoring.
<hr>
Okay, I've Restored, but the error is still coming up
Are you sure you've Restored? Quite a number of folks are assuming that just downloading the iPod Updater is enough. It's not. And neither is downloading iPod Updater, and installing it on your computer. It needs to be implemented on the iPod, according to the iPod Updater instructions.
Okay, so if you have Restored your iPod, and you are still getting this error, then you have a variety of options available.
Chkdsk errors that are not fixed with a Restore are most likely down to two things:
1) A physical issue on the iPod itself
or
2) An issue on the computer's operating system
Here's where it gets woolly. There are a variety of things you could try...
Format the iPod in Windows
This would usually have the same effect as a Restore, but a deep-level format in Windows is something that Apple have recommended in the past, as a last resort to completely wipe the iPod before performing a Restore with iPod Updater. This process wipes the iPod.
To do this:
1) Enable Disk Mode on the iPod. You can do this either in iTunes (which is best), or manually on the iPod itself.
2) Open My Computer and locate your iPod
3) Right-click the iPod and select Format
4) Leave the parameters set at their defaults, and ensure Quick Format is unchecked
5) Hit Format
6) Then Restore your iPod as normal.
Run the Chkdsk utility
You could run the chkdsk utility on your iPod. But Restoring your iPod has the same effect as running chkdsk. Chkdsk does not wipe your iPod.
1) Enable Disk Mode as above
2) Determine the drive letter of your iPod from My Computer
3) Go to Start, Run
4) Type cmd. Hit Enter to take you to the Command Prompt.
5) Type chkdsk /f X:, where X is the drive letter of your iPod. Hit Enter, and any corrupt files are found and corrected.
Run Windows ScanDisk
ScanDisk is the Windows version of Chkdsk. It does not wipe your iPod.
1) Enable Disk Mode
2) Right-click the iPod in My Computer, select Properties
3) Select Tools
4) Select the option to scan the disk for errors
Try changing the Drive Letter of the iPod
Sometimes Windows confuses the drive letters, and this can cause the iPod to be adversely affected. Try the instructions detailed in Apple KB Article 93499 to change the drive letter of the iPod. This does not wipe your iPod.
Try changing Hardware Policies for the iPod
The Hardware Policies in Windows have been known to affect the way in which the iPod connects, synchronises, and disconnects. This does not wipe your iPod.
1) Enable Disk Mode so the iPod appears in My Computer
2) Right-click the iPod in My Computer
3) Select Properties
4) Select Hardware Policies
5) Select Optimize for Performance (instead of Optimize for Removal)
6) Restart your computer.
Contact Apple for a replacement iPod
Some chkdsk issues have been caused by faulty hardware. As a last resort, contact Apple Support by phone to report your issue, and/or request an iPod Service.
If you explain that you have followed all these steps, you should have a strong case for obtaining a replacement iPod.
<hr>
Thanks!
Thank you to everyone for their continued support, kindness and excellent troubleshooting skills here on Discussions. There are countless people that I am deeply grateful to for their assistance in handling this issue. Rest assured folks, you have made me the Discussions Furball that I am today.
Happy Podding folks!
Kind regards,
Gopha.
<hr>
References
1) The Original Corrupt iPod File thread from 2004. (Credit: AbbyM)
2) Our Summary and Index threads to consolidate the chkdsk issue at the height of its reign of terror.
3) Chkdsk is fixed by iPod Updater 2005-06-26.
4) Different flavours of chkdsk.
5) Happy Birthday chkdsk!.
6) Apple Level 2 Technical Support officially close the chkdsk casefile. (Credit: Apple Level 2)
7) Chkdsk can be fixed by changing the drive letter of the iPod. (Credit: daisysnroses, jchiu8)
8) Chkdsk can be fixed by changing the hardware policy. (Credit: Bruce Finn)
9) Chkdsk caused by faulty hardware. (Credit: Kiwi_Bloke)iPod Updater 2006-03-23 has been released
iPod Updater 2006-03-23 includes iPod Software 1.1.1 for the new iPod and new iPod Software 1.1.1 for iPod nano.
iPod Updater 2006-03-23 contains the same software versions as iPod Updater 2006-01-10 for all other iPod models.
What's new in iPod Updater 2006-03-23:
- Volume limit
- Bug fixes
I have been trying to ascertain from Apple Support Level 2 as to whether the latest iPod firmware improves or provides better resolution for the chkdsk issue. If anyone has been using iPod Updater 2006-03-23 to resolve their chkdsk woes, feel free to post in here just to say how things worked out for you...
Kind regards,
Gopha. -
What is being done to make InDesign better? Our users seem to have many corruption issues which seem to be resolved either by "cleaning" the files by exporting them to .IDML or by deleting and recreating the preferences file. I cannot seem to reproduce the scenarios that cause these corruptions ( i.e. doing steps A, B, C results in corruption) but I can be assured every day one of our users has an issue with a corrupted file. I have done the usual with keeping software up-to-date, operating systems patched, device drivers current, etc., all to no avail. I would like to know how serious Adobe is about getting to the root cause of these corruption issues. Obviously file corruption is a known problem if there are knowledge based lists on how to resolve the issues and software has been created to scan and fix corrupted files. What I am looking for an Indesign fix that prevents these file corruption issues in the first place. I would like some thoughts and comments about this.
Thanks for the response. This brings up addition questions.
How do I tell if there is a “bad font”? There doesn’t seem to be any correlation of corruption if “Arial” is used versus “Courier New” versus “Courier”. If the file becomes corrupt and we export it and import it to clear the corruption, we continue to use the same fonts and continue to work on the project until completion. If the fonts are bad and we continue to use them, we would never get the project completed as file would corrupt straight away. When we export and import the corrupt file, we do not notice any font or style change on the screen like a “bad font” got cleared during the process.
As for plug-ins, there seems to be Adobe plugins on these machines.
As for conflicting programs, do you have a list of programs that conflict with InDesign? How can I tell if another program is causing a conflict? If the person is running InDesign and they open Microsoft Word to perform another task, would this cause InDesign to corrupt its file?
I am currently taking the step of setting up a bare bones machine for a trial. The machine will have Windows 7 OS, Microsoft Office 2010, and InDesign loaded on it and that’s it. This hopefully will eliminate conflicts with other programs. -
Hi,
All of a sudden the other day my iPod cut off half way through a song, forcing me to reset. I plugged it in to my PC and a corrupt file error message popped up pointing to a file in my iPod. Then Itunes told me I had to restore the iPod, but after restoring the problem started again and I was only able to put about 100 songs on it before iTunes completely crashed.
When I try to play (the very few) songs that I have on it the iPod usually goes very slow, e.g. takes a long time to scroll through menus, change songs, etc.
I've restored it several times now and still the same problem. Keeps popping up with the corrupt error message when I hook it to the PC, too.
Any help?Hi,
I was wondering if you ever get the answer to that question if you could please send me the asnwer also.I am having the same problem with mine.But my message is a little different mine says file directory/iPod_control is corrupt and unreadable.I have the 30gb iPod video,please send me the asnwer if you get it.
thank you for your time. -
System File Checker -Cannot fix corrupt files
How practical do you consider the various measures to replace / resolve corrupt files are?
My feeling is that the simplest solution is to do a repair install or clean install of the operating system. This would include where appropriate an In place Upgrade, restore to factory settings or to restore a system image.
What do you think?
Hope this helps, GerryHi Gerry,
System File Checker is a utility in Windows that allows users to scan for corruptions in Windows system files and restore corrupted files. OF course, this may not resolve all problem.
Repair install, clean install, restore to factory etc have their own function on recovering the operating system. It depends on your exact issue.
For more detailed information, please refer to
http://windows.microsoft.com/en-in/windows/what-are-system-recovery-options#what-are-system-recovery-options=windows-7
http://windows.microsoft.com/en-in/windows/installing-reinstalling-windows#1TC=windows-7
Karen Hu
TechNet Community Support -
Every time I try to open Iphoto '11 (as of today) the coloured wheel appears after a few seconds and the program becomes unresponsive. I assume I have a corrupt file but I cant do anything including accessing help. I have tried closing down and restarting but it dosnt help. Any ideas please?
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD -
I was using photoshop CC as normal, when suddenly it started going haywire. It has corrupted all the open PSD files by distorting the images and colour. They are now completely unrecognisable and unusable. Does anyone know how to recover the original images as I was saving them as I went along but the files are now corrupt?
What version of Photoshop are you running?
I've seen a couple of instances over the last week or two where Photoshop has added masks, strange colours and also merged content from two separate PSD files that were open at the same time.
This has occurred on two different iMacs, (both 10.10.x) running Photoshop CC 2014.2.2 (20141204.r.310 x64).
see image below for example: -
External hard drive, error -36, corrupt files and slow transfer speeds
This is a long post but stay with me.
I've got an external 250GB Lacie drive connected to my 24" Intel iMac via Firewire 800. I have approximately 80GB worth of files (including my iPhoto library) on the Lacie that I'm trying to move over to my iMac but have run into some frustrating problems.
Overall, transfer speeds are erratic – fine at times and SUPER SLOW (5 minutes to transfer a 3MB file) at other times. At first I was transferring entire folders, but after always getting errors (error -36 to be exact), I was having to transfer individual files. This works fine as long as the files aren't too big (which makes the transfer speeds SUPER SLOW) and not corrupt (which gets me an error -36). Is my Lacie crashing on me? Is there any hope?
Here's what I've done to try and salvage my sanity with no resolve to my problems (not exactly in this order):
1) Ran Disk Utility to repair Lacie. Everything came back OK
2) Ran Disk Warrior on Lacie. Found a handful of bad items that Disk Warrior was able to repair. Had Disk Warrior replace the old directory of the Lacie with the new directory.
3) Ran Drive Genius: Raired and Rebuilt the directory, did an Integrity Check (came back OK), attempted to Defrag but could not because of errors to the drive, did a Scan for bad blocks (which after running for 3 days! it was only 20% complete and had found over 150 bad blocks, at which point I quit to try something else)
4) Checked that my Firewire cable was properly connected and replaced the older one I was using with a brand new one.
5) Disconnected all peripherals except for keyboard, mouse and Lacie.
6) And at times, even viewing a file on the Lacie has caused my Finder to crash, requiring a restart of my iMac.
I'm sure I've left something off I've tried but you get the idea.
I've read that maybe I can transfer my files using Terminal. Yes/No? Does this bypass any corruption the files may have?
What about creating a second partition on the Lacie and moving files over to the second partition? Does this solve anything? I don't know anything about partitioning so maybe I'm talking crazy.
I've also read that iPhoto tends to corrupt files which makes me hate iPhoto, and myself for not backing up.
And I've read a lot about error -36's and none of it sounds good so I'm just hoping that someone might have other suggestions for me to try and save my files (especially my iPhoto files which include baby pictures that if I lose, my wife will kill me).
So if anyone has any ideas, let me know. Please. I'll try anything.Hi Aaron Thompson-
I am fairly certain you have a bad power supply brick to the LaCie drive. This is a hard problem to troubleshoot as generally when the bricks go bad they do so slowly and the drive appears to power up and stuff but it just doesn't work.
If the drive is under warranty LaCie will replace the brick at no charge. Otherwise they sell them for around $20US on their website.
Luck-
-DP -
My Adobe Illustrator is CS6 and it corrupts the file if I save it using accents
My Adobe Illustrator is CS6 and it corrupts the file if I save it using accents. How do I fix this?
I mean, if I save a file called "crachá" I'm using an accent on "a" so it showed as "á" but if I do this Illustrator says the following error:
"The file may be read-only, or another user may have it open. Please save the document with a different name or in a different foulder"
and when I try to open it says:
"The file "Crachá.ai" is in an unknown format and cannot be opened."
So, my solution is to create a new file and call it "Cracha", without the accent. But it never happened before. How can I fix this legitimately?
Thanks.As for the resolution problem: upsampling an image doesn't improve its quality, because there's simply not enough information there.
As for the warning you get: it's most likely caused by RGB color mode or by placed RGB content that interacts with other content in the file (e.g. because you applied transparency)
In English it's this one:
As far as I see it there's no alternative to learning the basics of printing, color management and transparency. This is nothing that can be done by some forum posts.
Printing:
http://rufus.deuchler.net/2011/06/adobe-publishes-a-new-creative-suite-555-printing-guide. html
You need to understand what's happening on conversion of RGB to CMYK color space, which will happen when printing to offset presses. When you print on office printers, something else happens and all kinds of color may come out, because these machines sometimes do their own color correction and everything depends on how you set up the machine.
Provided you check the PDF in Acrobat: you need to set up color management there as well. This might lead to the differences (greenish) you're seeing.
Find a good book on color management and read the manual:
Creative Suite * Understanding color management (there's more about the subject)
As for transparency:
http://partners.adobe.com/public/asn/en/print_resource_center/Transparency-DesignGuide.pdf
http://partners.adobe.com/public/asn/en/print_resource_center/TXPGuide.pdf
Before sending files to a print service provider you need to get information on how they need the file. Most providers won't accept PDFs generated with "No color conversion". Or they won't guarantee for the output.
What you see on your monitor won't necessarily match the printed result unless your system is correctly calibrated and color management set up. And even then there might be differences.
Can't you contact this former colleague, pay him an amount of money and let him teach you the tools of the trade? -
ORA-01578: ORACLE data block corrupted (file # 1, block # 53713)
When i tried to export data from db (Oracle 11g, 64bit on Linux)
Im getting following error
About to export specified users ...
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 604 encountered
ORA-00604: error occurred at recursive SQL level 1
ORA-01578: ORACLE data block corrupted (file # 1, block # 53713)
ORA-01110: data file 1: '/u02/oradata/RSDB1/system01.dbf'
EXP-00083: The previous problem occurred when calling EXFSYS.DBMS_EXPFIL_DEPASEX P.schema_info_exp
EXP-00008: ORACLE error 604 encountered
ORA-00604: error occurred at recursive SQL level 1
ORA-01578: ORACLE data block corrupted (file # 1, block # 55497)
ORA-01110: data file 1: '/u02/oradata/RSDB1/system01.dbf'
EXP-00083: The previous problem occurred when calling SYS.DBMS_CUBE_EXP.schema_i nfo_exp
. exporting foreign function library names for user WB_APP_MANAGER
. exporting PUBLIC type synonyms
EXP-00008: ORACLE error 604 encountered
ORA-00604: error occurred at recursive SQL level 1
ORA-01578: ORACLE data block corrupted (file # 1, block # 44638)
ORA-01110: data file 1: '/u02/oradata/RSDB1/system01.dbf'
EXP-00000: Export terminated unsuccessfully
I donot understand how to solve this issue Please help me to solve this issue..
Thanks891620 wrote:
When i tried to export data from db (Oracle 11g, 64bit on Linux)
Im getting following error
About to export specified users ...
. exporting pre-schema procedural objects and actions
EXP-00008: ORACLE error 604 encountered
ORA-00604: error occurred at recursive SQL level 1
ORA-01578: ORACLE data block corrupted (file # 1, block # 53713)
ORA-01110: data file 1: '/u02/oradata/RSDB1/system01.dbf'
EXP-00083: The previous problem occurred when calling EXFSYS.DBMS_EXPFIL_DEPASEX P.schema_info_exp
EXP-00008: ORACLE error 604 encountered
ORA-00604: error occurred at recursive SQL level 1
ORA-01578: ORACLE data block corrupted (file # 1, block # 55497)
ORA-01110: data file 1: '/u02/oradata/RSDB1/system01.dbf'
EXP-00083: The previous problem occurred when calling SYS.DBMS_CUBE_EXP.schema_i nfo_exp
. exporting foreign function library names for user WB_APP_MANAGER
. exporting PUBLIC type synonyms
EXP-00008: ORACLE error 604 encountered
ORA-00604: error occurred at recursive SQL level 1
ORA-01578: ORACLE data block corrupted (file # 1, block # 44638)
ORA-01110: data file 1: '/u02/oradata/RSDB1/system01.dbf'
EXP-00000: Export terminated unsuccessfully
I donot understand how to solve this issue Please help me to solve this issue..
Thanksrun dbv against '/u02/oradata/RSDB1/system01.dbf'
& post results back here
dbv
DBVERIFY: Release 11.2.0.1.0 - Production on Fri Oct 14 20:39:11 2011
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Keyword Description (Default)
FILE File to Verify (NONE)
START Start Block (First Block of File)
END End Block (Last Block of File)
BLOCKSIZE Logical Block Size (8192)
LOGFILE Output Log (NONE)
FEEDBACK Display Progress (0)
PARFILE Parameter File (NONE)
USERID Username/Password (NONE)
SEGMENT_ID Segment ID (tsn.relfile.block) (NONE)
HIGH_SCN Highest Block SCN To Verify (NONE)
(scn_wrap.scn_base OR scn) -
Computer shuts on and off some corrupted files - no virues now
Listed below are some of the errors I found on event log in the laptop:
I have a Qosimo 8 megs of memory, windows 7 64 bit. Running AVAST 7.0 antivirus and Malwarebytes - both paid subscriptions. I think the model number is 830 530 I bought in 2009.
The shutdown problem has
been happening on and off for the last six months. I had two major instances of trojans taking over my machine and it caused constant shutdowns. AVAST worked with me on one and they had me use malwarebytes and spybot and hijack this. They took over my computer to get it up and running properly, but this new round of errors a trojan was found in the registry key and the startuptoolbar. Two nights ago I had another shut down several times and after running malwarebytes and antivirus I could find no errors so I’m leaning toward corrupted files? Is there anyway to fix these files without having to reformat the hard drive?
I did run a computer repair and a computer memory repair tonight using F8 and no problems were found by the computer. I’m not sure what to do with these errors in event viewer.. I get the toshiba error
quite often and it madely stops me from going online with my internet connection, and I had downloaded a newer version but same problem – I use windows repair in network and the error is always resetting the toshiba network IP. I just put a note into toshiba on that problem.
I also use microsoft silverlight for my fenderfuse application which needs that software operate properly. I’m not sure exactly what to do with that Custom dynamic link libraries are being loaded for every application. It states to check libraries – but what am I checking for? I do not have a lot of programs on the laptop but not sure what to look for in library?
Windows logs under Application
The description for Event ID 0 from source Ipod service cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event
The description for Event ID 0 from source SignInAssistant cannot be found. Either the component
That raises this event is not installed on your computer or the installation is corrupted. You can
Install or repair the component on the local computer.
If the event originated on another computer, the information had to be saved with the event. The following information was included with the event:
WLD InitializationTimerQueue. QueueWorkItem Started
The win logon notification subscriber <sessionEnv> was unavailable to handle anotification event.
The description for Event ID0 from source IViRegMgr cannot be found.
Same for AdobeARMservice
Same for User Profile Service
Critical events
System has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, rashed or lost power inexpertly.
Administrative
Events
Unloading the performance counter strings for service WmiApRpt failed. The first DWORD n the data section contains the error code.
The performance strings in the performance registry value is corrupted when process Performance extension counter provider. The BaseIndex value from the Performance Registry is the first DWORD in the Data section, LastCounter value is the second DWORD in the Data Section, and LastHelp value is the third DWORD in the data section.
Several warnings on Toshiba Servicer Station. Error checking dependency (1df917db-3056-41a-bbac-0489a6b63d4dj: Unable to retrieve registry value.
Toshiba Service Station - skipping empty element (tsu:setup_args) (several errors on this one)
( I also installed the latest Toshiba service station and it did not fix the error problems in events log. When I did a restore it was before softare update this was added so now my computer is working properly with windows on connecting to the internet wireless.)
Unloading the performance counter strings for service WmiApRpl (wmiaprpl) failed. The first Dword in the Data section contains the error code.
Failed extract of third-party root list from auto update cab at: www.download.windowsupdate.com/msdownload/udate/v3/static/trustedr/en/authrooststi.cab> with error: A required certificate is not within its validity period when verifying against the current system clock or the timestamp in the signed file.
Biggie? Custom dynamic link libraries are being loaded for every application. The system administration should review the list of libraries to ensure they are related to trusted applications.
Audit events have been dropped by the transport. 0
The system has rebooted without cleanly shutting down first. Kernel-power - this has happened several times.
The performance strings in the Performance registry value is corrupted when process Performance extension counter provided. The BaseIndex value from the Performance registry is the first DWORD in the data section, last counter value is the second DWORD in the Data section, and LastHelp value is the third DWORD in the data section.
Sometimes my computer shuts down often on its own and I find a Trojan - other times it shuts down often during a start up and I find no viruses as was the case yesterday. Today I did not get on the internet and the computer worked fine.
I guess I need to know if there is a way to reinstall the corrupted files without having to go back to the default settings when I got the computer. Does toshiba have a windows repair disc that works better then what I did with using F8 and having a system repair and memory check done that found no errors? I also installed the latest Toshiba service station and it did not fix the error problems in events log. When I did a restore it was before this was added so now my computer is working properly with windows on connecting to the internet wireless.
Malwarebytes said that by looking at these event viewer logs that it does not appear that I have a virus now but I do have corrupted files and can toshiba help me in getting them fixed. I really hate to do a complete reformat.
Thanks
Rose
Solved!
Go to Solution.Event Viewer 5/14 events
Window logs
Application –
Information - Software protection service has stopped
Error – Unloading the performance counter strings for service wmiaprpl failed. The first Dword in the data section contains the error code
The performance strings in the performance registry value is corrupted when process Performance ext
The winlogon notification subscriber <SessionEnv> was unavailable tohandle a notification events
Error – Your computer was not assigned an address from the network (by the DHCP) Service) for the Network Card with network address0x701A043A07AE. Your computer willcontinue to try and obtain an address on its own from the network address (DHCP ) server.
Failed extract of third-party root list from auto update cab CAPI2
Warning – customer dynamic link libraries are being loaded for every application. The system Administrator should review the list of libraries to ensure they are related to Trusted Aplications.
The performance strings in the Performance registry value is corrupted when process Performance extension counter provider. The baseindex value from the performance registry is the first Dword in the data section, etc. – this error shows up often for today 5/14 (on line the aqnswer to this error is -
Performance counters are collected and used by services and applications. If they are installed incorrectly or with improper permissions, performance counters cannot be loaded, and services or applications cannot collect or interpret the data.
I noticed that software protection stopped and then it showed software protection working. I did not get any critical stop errors like I did before but that is because I don’t have any Trojans or viruses. I ran a full scan with both Avast and Malwarebytes yesterday and no problems.
Under system for today I see
The multimedia Class Scheduler Service entered the stopped state.
The application experienced service entered the stopped state
Under application Window logs for today
Fault bucket 130885241, type 5 Event Name PNDriverimportError response: not available
This is a warning error:
Windows detected your registry file is still in use by other applications or services . The file will be unloaded now. The applicationsor services that your registry file may not function properly afterwards.
10 user registry handles leaked from \Registry\User\(this section covered several registry problems I sent the note online and this is what they state: Cause this behavior occurs because the windows operating system automatically closes any registry handle to a user profie that is left open in an application. User Action – this is a warning event the application that is listed in the event detail is leaving the registry hand open, and it should be investigated.
I don't know how serious this probems are - I didn't like seeing the software security being stopped. But then it started up. I have copied everything personal on this laptop so I am ready to reformat if needed.
I still have the problem about IE not opening links unless I right button click to open it. I also had to make a separate ID to run Fender Fuse software as this computer was not recognizing the USB slot where I connect the amp to the laptop. Fender had me set up another id with minimum items and then I was able to connect to the amp and make changes.
Rose
Maybe you are looking for
-
AS01 - Purchase order number in asset
Hello dear all, User wants to add manually the purchase order number of asset in the asset master record. This field doesn't exist in the standard. What is the best solution for this request ? Thank you in advance ?
-
I am thinking to buy an Iphone 4s from USA. So I just want to know if I buy an unlocked phone will I able to use it in India with vodafone network. Can u also suggest where to buy the unlocked iphone 4s in USA.
-
Hi, I have been studying about MDM. I do understand by now how does data come into MDM through XI and using Processes Chain goes in CI for Matching and Cleansing. After that once the Change Request is processed and Workitem is Activated the Data move
-
I let a friend borrow my 64G Flash Drive and he returned it with a bunch of unwanted files. At first I tried deleting them but all I got was a dull "beep" so I figured I'd just erase the whole thing and reformat. Opened disk utility and it was reco
-
I have an IPad 3 and HP6510 [167816] I can print pictures, or emails, but I am unable to print from note pad