Blocks - to have on the block diagram, but not to execute

Hello,
In standard programm languages there are possibilities to mark some lines in code not to execute them (for example, if we have written some code and want to use keep it in programm, but don't need to execute it right now)
e. g.
Does LabView allow to mark several blocks on block diagram, to have them on it, but not to execute?
Thank you in advance.
Anna

Hi Anna,
in newer LabView versions you can disable parts of a block diagram by using the "Disable" structure. This will work even with unfinished, buggy code.
In older versions (pre-8) you can use a case structure to put the "not to be executed"-code in the not-executed case - but here the code has to be executable...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Similar Messages

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel?

How do I get the Label for a Front Panel Control to appear in the Block Diagram but not on the Front Panel? On the Front Panel I am making a complex control that consists of a Slider and a Numerical Input box. Both Controls display the same information and either can be used for Input. When one changs, the other is made to display the same value.
But I only want the Slider to display the Label on the Front Panel, to avoid confusion. On the Block Diagram however, I want both controls to display their Labels so that I know what they are. How do I display the Label for a Control on the Block diagram, but not display its Label on the Front Panel?

No. The Label Visible property is separate for the front panel control label and the block diagram terminal label.
How did you start out with the block diagram's label not being visible? Whenever I drop a control or indicator, the label is always visible on both the FP and BD by default. Maybe there is a LabVIEW option that causes new controls/indicators not to have their labels visible by default, but I have yet to find it. I don't think an item should ever be dropped without the label visible, good LabVIEW coding practice demands that the labels for control terminals on the block diagram be visible so that you know what control or indicator a wire is going to.
That being said, I have seen a lot of VI's posted where the label for the terminal on the BD is not shown (against good programming practice.) I've gone to the BD and right clicked to show the label. Sometimes, the people have an empty label (which will turn off the visibility for both the FP and BD) and I'm forced to add some text of my own into the label so I can figure out what their code is doing. When I add some text to the label, at that time, I find both the BD and FP labels become visible.
Are you dealing with controls that have empty labels to start?
Good programming practices:
1. Always have a name for all of your controls, never use and empty label by deleting the text in the label.
2. Make the labels unique. For example, don't have two controls both called Stop. How do you know quickly know which terminal relates to which control?
3. Always show the labels on the block diagram, so you know the function of a control's terminal. If you want to hide the label on the FP, that's okay.
4. If you want a different label to appear on the FP than whatever you actually called the control, then use the caption. You can hide the label and show the caption. This is useful if you need to programmatically change what the "label" is on the front panel such if you are making an application that needs to change its user interface such as for a foreign language.

My ipod has been stolen and I do have the serial number but not icloud, How do i track it?

My Ipod has been stolen and I do have the serial number but not icloud, How do i track it? PLEASE HELP!

What To Do If Your iDevice Is Lost Or Stolen
If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
1. Reporting a lost or stolen Apple product
2. Find my lost iPod Touch
3. AT&T. Sprint, and Verizon can block stolen phones/tablets
4. What-To-Do-When-Iphone-Is-Stolen
5. What to do if your iOS device is lost or stolen
6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
7. Find My iPhone
8. Report Stolen iPad | Stolen Lost Found Online
It pays to be proactive by following the advice on using Find My Phone before you lose your device:
1. Find My iPhone
2. Setup your iDevice on iCloud
3. OS X Lion/Mountain Lion- About Find My Mac
4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

I haven't been able to watch any of these three movies because of a pop up saying ''Unknown error (-42110)''. I have tried the possible solution but none of them have worked,they will expire soon.pls help

I have rented 3 movies added up to a whopping $15.I have tried the possible solution but none of them have worked,they will expire soon.pls help

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. Please help

I bought an apple iPod 5th generation the other day and I cannot remember the unlock passcode. I have done the restore thing, but because I never set it up or synced it with iTunes, it does not recognize my device. It is disabled for one hour. There's only a few things that could be my passcode, but because it disables for an hour, it is time consuming trying to figure it out. What do I do? I do not care about having to erase everything since it's new and there's nothing on it, but it was never synced with iTunes.

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.

My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good. I can open on the web site but not from my mac computer

My reader will not open a PDF file that I have downloaded from a government web site (an application form) - it states that the file is not good. I can open on the web site but not from my mac computer.

Maybe this: http://helpx.adobe.com/acrobat/kb/pdf-error-1015-11001-update.html ?
Do you have a link to that document?

I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.

I need help with color pallette in iPhoto 11. I have created a book and would like to use a different color background than those given in "background." I have found the color palettes but can't seem to incorporate them into my backgrounds palette.

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
Additionally I have no idea what you are saying here
I have found the color palettes but can't seem to incorporate them into my backgrounds palette.
And it always helps for you to dientify the version of iPhoto that you are using
LN

I have two apple id accounts ,when i used to update application it used to prompt a default id and if the application was downloaded using the other id i would cancel and it would prompt the other id but not any more .

i have two apple id accounts ,when i used to update application it used to prompt a default id (the old one) and if the application was downloaded using the other id i would cancel and it would prompt the other id but not any more .
it just prompt the old id which im not signed in with im signed in using the new id and when i cancel nothing happens and when i try to update applications separately i have the same problem .
im signed in using the new id
the old one is my wife's so i can't delete it
the problem happens when i update all or each application by its own
using ios 5.0.1 on a iphone 3gs
the applications are downloaded using both the new and old id's
any help will be greatly appreciatedِ

These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums - I've asked the hosts to remove yout account ids from your post.
In terms of combining accounts it's not currently possible to do so, nor to copy/transfer content from account to another.

HT1800 how do I install a wireless printer to my iMac that doesn't have a cd drive. It comes with a cd but I can't use it. I have tried to download the driver online but not sure what to do now...

I have a Brother HL-2270DW that is wirless and it comes with an installation CD. But I don't have an external CD DRive for my imac. I have downloaded the driver online but I don't what to do from here. I suppose if I had the cd drive it would take me through it step by step but I can't.

You posted in the OS 10.3 (pre year 2000) forum instead of the OS 10.8 forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
 Cheers, Tom

Hello my name is Omar Andres Santacruz, finished iMedicalOffice buy a program you have in the app store but what he said on the page is not what I expected, I was very disappointed that, frustrated and reweighed when I check my account had gained 139.99 f

Hello my name is Omar Andres Santacruz, finished iMedicalOffice buy a program you have in the app store but what he said on the page is not what I expected, I was verydisappointed that, frustrated and reweighed when I check my account had gained139.99 for 7 times, I do not understand what has happened that is not the first time I buy something ustedeses thank you very much for your help

Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum. Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is. Apple is not here. It's users, like you.
If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

I have read the help info, but I can't find how to change the default email address, to the one that is my adobe I'd?

I have read the help info, but I can't find how to change the default email address, to the one that is my adobe I'd?

Adobe Reader for iOS doesn't set the default email address when you email a PDF.
It's found in the Settings app:
Settings > Mail, Contacts, Calendars > Mail > Default Account

Good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, i

good day please help me, my iphone 5 wont turn on. i have tried the hard reset . but that didnt even work. i plugged it in charger but still no response i connect it in itunes still.dont open. please help. i dont have the warranty anymore, so please help.me.

Please make a Genius Appointment and take it in for service. By now it probably cannot be fixed, but you never know.

In Address Book, why does Apple let you create custom fields in the Template cards but not have them available for importing?

I open Address Book, go into Preferences, select Template and under the Names field (friend, assistant, father, etc) I add a custom field called "Principal".
I also add two more custom fields in the Email area.
Quit Address Book then relaunch. Add a new contact and the new custom fields, Principal, etc. are there. All good so far.
I have a Now Contact file with about 200 contacts in it. I export all fields as a Text file, Tab delimited. No problems there. With Address Book launched, select Import, pick the text file, leave Text Encoding on Automatic and click Open.
The window that shows the fields for Address Book and fields for the text file side by side opens. This is where you match up the correct fields for importing. If I go to one of the fields from the text file that I created a custom field for, click under the Address Book heading on the Do not import, scroll thru the Apple choices of fields, none of the custom fields show up. Only the original Apple ones are there. Why does Apple let you create them in the Template area but not have them available for importing? Does anyone have suggestions on getting around this?

While most likely not of interest to you, Spotlight can also tell you where the files it finds are located
Hover the mouse pointer over the name, and press Command-Option and the path to the file will be displayed.
As for opening a terminal session in the directory where a file is located, there is Applescripts that do just that as well as specific features in Lion/Mountain Lion terminal:
<http://stackoverflow.com/questions/420456/open-terminal-here-in-mac-os-finder>
<http://hints.macworld.com/article.php?story=20110729034827358>
<http://www.macworld.com/article/1047793/folderinterm.html>
<http://www.macworld.com/article/1161876/open_finder_folder_in_terminal.html>
<http://www.macobserver.com/tmo/article/os_x_lion_open_a_folders_location_in_term inal>

HT201272 I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise? 2nd I purchased 21 new tunes yesterday on the new computer worked great but when I made a disc

I have tried several ways to transfer my itunes library and Playlists to a new computer. I get the music library but not the playlists. Can you advise?
2nd > I purchased 21 new tunes yesterday on the new computer> worked great> but when I made a disc to transfer the playlist. I get the music but no album info just 1,2,3,etc. So I have signup both computers to share thinking that would work. But no to that also.
Please advise.
Thanks,
Bob

Copy the entire /Music/iTunes/ folder from old computer to new computer.
See this -> http://support.apple.com/kb/HT4527

I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

I have music that is playing within the iTunes program, but not on my iPod. How can I fix this?

Skipping songs
The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
If you use Windows you may like to try scanning the files with MP3Validator which can find & fix some internal MP3 errors.
Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/control clicking and using the option Convert id3 tags> None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g.convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
tt2

Blocks - to have on the block diagram, but not to execute

Similar Messages

Maybe you are looking for