Blog alerts for entries with future publish dates

We have started using blogs and I am instructing users to set up alerts when new items are added to blogs. They are working, however, an Executive created a few blog posts today for future publication while he is out of the office. The dates he set are correct,
however the alert came out today. Is there a setting that needs to be changed to only alert when something is actually published? Thank you in advance.

If user select "Anything change" for alert, then alert has done its job. Blog created and email sent. Alert on published event is not possible, however Alert
on VIEW is possible. So create a view for "Published Bold" filtered on published column, and then delete user's alert from site settings and configure alert for them.
you simply need to know that they are used to notify people of changes to list items. The screenshot below shows the options available in that you can select to be notified
on all changes, or just the changes of others, and select whether you are notified immediately or have a daily or weekly digest instead. You can also nominate others for the email, not just yourself... 
This is a alternate way I can think of.
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Similar Messages

  • Cannot reverse document with future posting date

    Hi,
    When I tried to reverse a document with future posting date, system gives error F5362 Posting date must not be smaller than XX.XX.XXXX (x = future posting date).
    Is it possible to do this in SAP?

    Hello,
    You need to use reversal reason configured accordingly.
    Configure the reversal reason for your purpose:
    IMG => Financial Accounting => Business Transactions => Adjustment Posting / Reversal / Define Reasons for Reversal
    Make SURE that you have ticked Alt.Pos.dt (Alternative Posting Date) check box.
    Save it.
    Now use this reversal reason for your posting and give a fugure date.
    Make sure that the future posting period is opened but NOT closed.
    Please also read F1 on alternative posting date check box:
    Indicator: Alternative posting date allowed
    Indicator as to whether you are allowed to specify an alternative posting date for the relevant reversal reason.
    Use
    When you use the reversal reason, the system checks that reversal is not carried out using an alternative posting date and therefore possibly in a later posting period or in a later fiscal year.
    Examples
    If you want to use negative postings during reversal but only if the reversal is posted in the same period, you can define two reversal reasons:
    1st reason: No alternative date allowed, generate negative posting
    2nd reason: Alternative date allowed, do not generate negative posting
    Regards,
    Ravi

  • How do you set up the alert for FaceTime with sound

    How do you set up the alert for FaceTime with sound?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
     Cheers, Tom

  • Alerts/Remindrs to process S/O with future Delivery Date

    Is it possible to create an Alert or Reminder, that will alert the user (or users) who creates a Sales Order with a future Delivery Date to process the Sales Order?

    I am looking for the alert to remind the Order Entry department they have pending orders that need to be processed.
    The Alert should say" Sales Order Number(s): xxxxx1, xxxxx2, xxxxx3 need to be processed. These alerts should be generated 5 days before the delivery date.
    Often times we have customers that will place an order, but they state they do not need it until a week or two from the time the order is placed. We then generate the sales order, but will not print the "Pick Ticket" to the warehouse until three days before the customer expects the product and Order Entry will forget to process these sales orders; this is why the alerts are needed.

  • Unable to make entries for objects with no master data in IP

    Hi All,
    In BPS, when created a layout, which contains characteristics, in whose properties 'Master Data' is not checked, we could enter the new values for them directly in the layout.
    In IP, we could not do the same with the 'New Lines" option set on Analysis Item in the WAD for the characteristics whose master data property is not checked.
    We have a layout, where, some characteristics are having master data checked, and some other characteristics where master data is not checked.
    With the 'New Lines' option set on Analysis Item in the WAD for the characteristics whose master data property is not checked, when data entered, the error message is appearing saying that the data is not valid.
    This is so quite simple in BPS. I think, I might be missing something in IP on how to achieve this.
    Thanks in Advance,
    Best Regards,
    - Shashi

    Hi,
    In IP it's integerated that if you will not maintain master data you may not be able to plan for new value of characteristic.It's the normal behavior of system.
    Cna check the link below:-
    Master data planning in BI
    Hope it may be helpful

  • New entries created for RPTQTA00 with the same data

    Hi,
    Whenever I run RPTQTA00, it creates a new record in IT2006. If i run the report again, another record is created with the same data. How can i prevent this? It should only update the existing record.
    thanks,
    Steph

    Hi
    Can you please paste the piece of code written for the same to get the idea.
    Thanks
    LG

  • Creating a template in Financials for using with XML Publisher..

    to whom..
    I hope someone can help please. I'm trying this process for the first time so please bear with me..
    Ive got everything in place for producing PDF reports via XML Publisher through ORACLE Financials but I'm stuck on the last
    part.
    According to the notes (Publishing Concurrent Requests with XML Publisher - An Oracle White Paper Jan 2005) I've come
    across, I need to update the concurrent program definition with a default template (when you submit a request, its in the
    'upon completion' last section where theres an option to change or enter a template layout) yet this section is GREYED OUT.
    Now according to my notes, to create a template you..
    "Setting a Default Template....to select a default template in the Update Concurrent Program page available from the System Administration
    responsibility (Note that this field is available only from System Administration. It is not available from the System
    Administrator Forms interface)......."
    My query is, where is this 'Update Concurrent Program page'..?
    Thanks In Advance..
    Steven
    Edited by: user554089 on Sep 16, 2008 4:02 AM

    OK, so now I've found out how to 'default a template for EBS 11i' (System Administration > Concurrent > Programs - notice its Administration not Administrator)... but its unavailable.. in the the 'OnSite Setting' tab there was no box visible for me to enter a template filename. Does anybody know why this could be?
    thanks,
    Steven

  • For people with an unlimited data plan...does it slow down for you after 2GB?

    Ive had my unlimited data plan since i joined AT&T back in 2008 when  i bought the iPhone 3G...ive been able to keep it for my current iPhone 4 and now ill be upgrading to iPhone 5 and was wondering if anyone else with an unlimited data plans suffers slowing down of data after 2GB? it mite b more than 2GB but it def does slow down...will this continue to happen or it is it just me?

    AT&T's policy explained - http://www.att.com/esupport/datausage.jsp?source=IZDUel1160000000U
    Click the "what you need to know".  If you exceed 3GB you will be throttled, and you should receive a text message about it the first time you go over.

  • Payment run with future posting date

    Hi,
    There might be a straight forward answer to this question, but for some reason I cannot get it to work the way I believe it should work!
    Instead of processing payment runs every day we want to create the payment run only twice a week. However the value date in the payment instruction to the  bank should be the actual due date of each invoice. This could result in 2 payment lines to one supplier.
    I have found that by setting the indicator "Payment per due date" in the payment method it will generate these 2 payment lines.
    The problem is that we also want the clearing document to be split into 2 documents each with the posting date to be equeal to the value date - for some reason I cannot get this to work?
    I have looked at substitutionrules and activating an enhancement, but looks like is not possible.
    I would have thought this is a standard requirement, but ?
    Thanks for helping

    Hi,
    It seems to be that you have to create 2 payment runs.
    Regards,
    Svetlin

  • Re-Packaged 9IASR2 for Linux with Patches release date?

    Anyone have a date when Oracle are going to re-release the linux distribution for 9iasR2 with all the patches.
    It took me 3-4 weeks to get everything working on Linux. I also installed the Win2K version which was very smooth. I plan to re-install on Linux but onto two boxes, one for the infrastructure server and one for the
    app server because of the memory and processing requirements. I don't want to go through the pain of that linux installation again!!!!. I have several projects on hold for this, so a timescale would be very useful.

    Wait until it becomes available on OTN, and then place the order.
    HTH,
    Ashesh Parekh
    Oracle9iAS Product Management Hi Ashesh,
    Have we got any update on the release date. My project deadline is at the end of the month. If the linux repackaged version is going to be later than that I will have to install on Mircosoft Win2k!
    Regards
    Orlando

  • Blog won't publish entries with November 2010 dates

    I started a blog and website about 10 days ago and haven't had any trouble publishing blog posts in the month of November. Starting yesterday and continuing to today, I can't publish entries dated in November, even with the current day. Once I change the date to October, the entry publishes without issue. Has this happened to anyone else? I have plenty of space left.

    This somehow resolved itself a few days into November.

  • IWeb blog entry with an earlier date than today?

    Is there a way to create an entry in iWeb that has a date before today's date? Say I want to create an entry of something that happened five days ago... When I create an entry, it automatically sets the date to today. Is there any way to change the date backwards for the entry?

    Possibly not. When you highlight and erase it, it doesn't help you make a new one, but the font size and color settings remain. I just re-wrote the dates I wanted in the same way they had already been written (day, month, date, year).
    Example on my non-profit site, all the journal entries were entered on the same day (Jan 25), but I changed the dates on them to reflect when they were actually written by the author. See under "Journal" page in this site linked here: http://www.catalinafoundation.org

  • Early watch alert for EPP with Grey status

    Hi all,
    I facing an issue with EWA report for my EP system ,this report was generating smoothly without any issues since long ,but from past several weeks ,the status in DSWP shows grey ,when I open the report it says TH_SERVER_LIST and SYSTEM_INFO  Required for EWA report ,
    Help me to solve the issue
    Many thanks in advance
    Regards
    George

    Hi  George,
    Here is the solution for your query.
    Note 762696 - Grey rating for Earlywatch Alert
    [Click Here |https://service.sap.com/sap/support/notes/762696]
    Regard,
    Gagan Deep Kaushal

  • Can i create a singol folio application for android with digital publishing professional edition?

    hI, (sorry but i speak english a little bit).
    I would like to create my application with professional edition because i wont see it on android device too but i need just a singol folio app.
    i don't want a multifolio viewer, i need just a singol updatable app that start directly from the icon withouth no other number.
    How can i do?
    I see also that a lot of function are limited for android, are there some news?
    Thanks a lot

    You can't.
    Even if the subscription app only has one folio in it, you have to
    create it that way for Android. This requires a pro or enterprise
    account and you'll have to pay for the downloads.

  • No notification alert for voicemail with LG Transpyre

    How do I get the LG Transpyre to tell me that I have a voicemail?

    Heather68504,
    I am sorry to hear of the issues you are having with voicemail on your LG device. Vociemail is a very important part of the phone. As this is normally a prepaid device, do you currently have this device activated on a prepaid account? If so, please reach out to our prepaid team at 888-294-6804 so they can investigate into the issues with your voicemail notifications.
    LindseyT_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Maybe you are looking for

  • XI 3.0 Patch Procedure - sequence of deploying archives.

    I have mistakenly deployed the sda's for the Adapter Framework Core, Adapter Framework and XI Tools "Seperately" instead of "One Deployment Action" per note 750511. Does anyone know if this causes problems? we are having issues with our Adapter Engin

  • Insertion of date in dd-mmm-yyyy format

    I have a jsp page, from that i can enter values in oracle database. my jsp page is working, but the problem is that it can only accept the date dd-mmm-yyyy format. i.e 20-jun-2004, but when i enter date in dd/mm/yyyy format i.e 20/06/2004, it does no

  • Mirror vide output different Resolution

    I want to mirror the video to my TV, in order to use it as a media cener. I will buy a VGA splitter so the same output could be seen in the LCD and my HD TV. The problem is that my LCD Monitor (Acer X221W) Supports 1680x1050 and my TV supports a lowe

  • Label when material creation

    Hello, how do I set up the print of a label when a material has been created with MM01? No goods receipt is done at this time. thank you!!

  • How to modify item quantity in an scheduling agreement

    Hi, I'm trying to modify target quantity (ekpo-ktmng) in an item of a scheduling agreement (you can see it in me33l transaction). When the users tries to modify, using me33l, the quantity of an item in an scheduling agreement, I need to pick this val