Blog/Archive may be corrupted, what to do?

For over a week now, I've been struggling with the same publishing errors ("Can't create the file Shapeimage..." while attempting to update my Blog. While I can't be certain, the issue seems to surround the Archive, as that's the page that, while attempting to publish, inevitably results in the error message. Regardless, I've been unable to complete a Publish.
Can anyone offer some helpful suggestions as to how to remove/rebuild the Archive - thereby forcing iWeb to recreate the Archive from scratch? The Blog is nearly 300 entries long.
Also, I've newly encountered something called "Library," housed used Blog/Archive in the Site Organizer. What is Library?

Randy...
I don't know if this will make a bit of difference at all in your situation, but it's something that I've tried in the past with no ill effects. Make iWeb generate a new Domain file for your site...
1. FIRST AND FOREMOST, make a backup copy of your Domain file NOW.
2. Open up iWeb and just leave it open...
3. Go back to your original Domain file and drag it to the trash. But don't empty the trash!
4. Now click back to iWeb and select "Save" from the File menu
5. iWeb should complain that your Domain file is in the trash and ask if you want it to save a new Domain file. Accept the default location.
When iWeb is done saving, you should have a new Domain file sitting in the default location (/Users/username/Library/Application Support/iWeb/). Quit iWeb and reopen it again to make sure that your site is still there with the new Domain file (remember your original Domain file is still in the trash if you need it!). Then try to publish. Let me know if you see any difference. NOTE: This may trigger a "publish all" type of event, so it may take a little while.

Similar Messages

  • I have just recently updated Itunes software on my Windows 7 Laptop purchased songs.  Logged in 3 days later and now says this copy of itunes may be corrupt or not installed correctly.  Please advise what I should do??

    I have just updated my ITunes software to the latest as prompted. I purchased songs as wanted and then closed it down and have been billed accordingly.  Since trying to open ITunes again.  I have been met with the message saying This version of Itunes may be corrupted or not installed properly.  Reinstall I Tunes.
    Please advise what has happened and what I need to do (using windows 7)

    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • When I try to connect my iPod 4th gen to my computer I get a message stating that it may be corrupted and asks if I wish to format the disc. However, I have hundreds of songs and photos that I don't want to lose. What can I do?

    When I try to connect my iPod Nano 4th gen to my laptop I get a message that my device may be corrupted and asks do I want to format the disc.  However, I have hundreds of songs and photos that I don't want to lose. What can I do?

    This can sometimes be the result of a faulty/damaaged USB sync cable.  Do you have another cable you could test it out with?
    B-rock

  • HT203200 Whenever i open iTunes it tells me that 2 of my downloads cannot be completed because the file may be corrupted. I cannot get rid of this message or complete the downloads. Other downloads worked. What can i do to get rid of this warning message

    Whenever i open iTunes it tells me that 2 of my downloads cannot be completed because the file may be corrupted. I cannot get rid of this message or complete the downloads. Other downloads worked. What can i do to get rid of this warning message or complete the downloads?

    Welcome to the Apple Community.
    Try deleting the problematic file (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.

  • Links in blog archive not working

    Can anybody help me get more reliable performance from my iWeb archives page?
    http://web.mac.com/truthmaker/Site/Blog/Archive.html
    I am getting very frustrated with the Archives page for the blog I've created with iWeb. Often -- very, very often, the links on the Archives page for past posts are corrupted -- not by me, but somehow by the software. When these links are clicked, instead of showing the proper link and taking viewers there, the link looks like: http://web.mac.com/truthmaker/Site/Blog/$link$. This of course results in one of two different types of "Page not Found" pages.
    One looks like this:
    Not Found
    http://web.mac.com/truthmaker/Site/Blog/$link$
    The requested URL was not found on this server.
    お探しのURLはこのサーバーでは見つかりませんでした。
    L'URL que vous avez sollicitée n'a pas été trouvée sur ce serveur.
    Die URL, die Sie angefordert haben, wurde nicht auf diesem Server gefunden.
    The other is a more professional-looking page that says "We're sorry, but we can't find the iWeb page you requested. . . "
    This is maddening to the point of being infuriating. These links are not always corrupted, but it seems to happen randomly and frequently. This has nothing to do with my links, which are all fine when published. It appears that this is an issue with MobileMe.
    Anybody have any ideas on what I can do? My blog is extensive (more than 100 posts over eight months) and I have lots of people accessing it. The blog serves both personal and professional purposes and I cannot afford or tolerate such spotty performance. Though I love Apple products, this alone is enough to make me cancel my MobileMe subscription and look into web-hosting from a different vendor.
    Can anybody help me get more reliable performance from my iWeb archives page?

    TruthMaker wrote:
    it seems to happen randomly
    Did you wait long enough for the 'archive' page to fully load before you clicked on a link ?
    If not, then you may have clicked on an incompletely loaded url, resulting in the "not found" MobileMe page. (yes, indeed it's about fractions of a second, that is why it seems to happen randomly)
    If this happened in Safari, clear the cache and wait for the page to fully load. Does that help ?
    Ps : I can navigate from your archive to the corresponding entry ( tried 4 random links)
    For other browsers, if you wait long enough for the page to fully load and then do a "reload page" and again wait long enough ... does that help ?
    When you hoover over the links and do get a $links$ move over to the next one, go back... now do you see the correct link ? Not always, but most of the time it's a blog entry with a very long filename.

  • Blog archives missing text but photos still show. Mac genius's stumped...

    Why would my text disappear from my older blog archives while my photos still show up?
    The text is still there, because if you bring up the html and view it in source mode you can see it...
    but just not on the blog page... like if you used white font on a white background. Any ideas?
    Even the genius's at the apple store couldn't figure this one out.
    thanks, mark.
    http://www.artfulrvadventures.com go to archives before may of this year...

    thank you cyclosaurs... I've been AWOL lately and am tardy with this response. *I should be able to just republish from my backup files, right?*
    Mark,
    Not just yet.
    What you should do is to publish your site to a folder in your local machine, then look for these xml files.
    If these xml files are published and exist in you local machine then you can force apple to correct the problem - otherwise, you may/will face the same problem in the future, when they screw up again.
    I will try to repost if I learn anything from the MME techs
    Jessica,
    I'm sorry to hear about your situation, but I would leave your blog as it is for now... *it's a long shot, perhaps* apple can recover those xml files.

  • Error 1418 / Itunes detected an Ipod that may be corrupt / "Autoplay"

    I've now spent many hours researching these 3 subjects in the discussion groups and I'm still one of many without a resolution to them. I think I've tried everything to get my 5th generation, 13 month old Ipod loaded with music again but without success.
    It all started when my Ipod stopped playing between songs while I just sitting at a table waiting for dinner - no drop, no abuse, no physical harm. I can't remember exactly what I did next but I think I couldn't get it to reset. So, I plugged it in to the computer and tried to restore it.
    Restoring it, of course, erased all the music off of the Ipod, but then when it was reseting, a search window titled "Autoplay" appeared in Windows. (now, every time I connect my Ipod to the PC this Autoplay window opens with the little search flashlight)
    Itunes then says that it "detected that my Ipod may be corrupt."
    I tried to restore a couple times and occasionally get the error message "1418" - that the Ipod cannot be restored.
    A couple postings suggested formatting the Ipod drive in My Computer. Unfortunately, when I open My Computer and right click on the removable drive (the ipod) My Computer either stops responding or the little drop down menu appears. But, when I get the drop down window and select format or open, nothing happens. Can't modify "autoplay" settings there.
    I've tried fixing/updating/restarting USB drivers, restoring from another PC, updating Itunes and Quicktime software and doing the trick with the appleipod.bat file. Even tried another Ipod cable.
    Here's a couple error messages generated from the Diagnostics feature in Itunes (It failed):
    [SERVICE: 0x60C,10:28:51 ERROR] Did not find first letter of stage
    [SERVICE: 0xFE8,10:29:01 INFO] [1] iPod needs formatting...
    [SERVICE: 0xFE8,10:29:01 ASSERT] Assertion failure: 'rtcTime->isDST != 0' [File: .\DeviceManagement\iPodDevice.cpp, Line: 770]
    [SERVICE: 0xFE8,10:29:01 INFO] [1] *** MOUNT FAILED - Non-FAT32 device, device session 0
    [SERVICE: 0x60C,10:34:43 INFO] [1] PHYSICALLY DISCONNECTED!
    [SERVICE: 0x5E4,10:35:28 ERROR] device number 0 exists, but isn't in m_objDeviceNumberMap!
    just to point out a few.
    When the Ipod is disconnected from the PC it appears to be working just fine - but no music, of course. I really don't know what else to try. Any suggestions are greatly appreciated. I'm at a dead end.

    My ipod also is searching for autoplay and the itunes diagnostics also indicates a problem showing connection status as "failed". However the Network diagnostics indicates the connection is fine and I have downloaded music but can't get podcasts to show up as "sync"-ed under any heading:podcasts, movies, videos, music, etc. I have followed every direction/suggestion/idea I can find and so far, no change...
    This is a new ipod for me, but not a new ipod. any ideas?
    Vaio   Windows XP  

  • I have some trouble With the graph XY, if I display a curve and try to zoom on it, it may be corrupted, or may disappeare​d.

    In fact this happens on some computers. the graph XY causes some trouble when zooming. Sometimes, when I run my main program and open the window with the graph, it has change the displayed it overflows to the edge of the windows. Or somtimes it works but if I zoom the curves disappeared, or is corrupted.
    I have this for instance on a computer with win 98 and a ATI graphic board. So I try to update all drivers but noting has changed. I try to decrease the hardware acceleration, and it seems to happen less oftenly.
    Does anybody have seen that kind of trouble ?

    > I have some trouble With the graph XY, if I display a curve and try to
    > zoom on it, it may be corrupted, or may disappeared.
    >
    I think what you are describing is not due to video driver, but rather
    to the way the graph works. The LV graph maps points to integer screen
    coordinates and draws lines be tween those point. When the numbers are
    way to large to fit on the screen, the numbers are pinned to a special
    large value. When this happenson one axis but not the other, it causes
    the slope of the line to change and potentially not cross the screen.
    If this is the same effect I'm describing, it only takes place when you
    zoom into the data by a large extent, pushing the other points about ten
    to fifteen monitors away. At this point you are no longer
    looking at
    measured data, but rather just on the interpolation of a line between
    two points. The solution if you must have one is to resample your data
    on the diagram to contain more points.
    Greg McKaskle

  • Blog Archive in iWeb

    Dear All,
    I am putting up my first site in iWeb and I am having trouble with the Blog Archive. It automatically places the Blog archive as a page underneath the Blog parent, and will not allow me to drag it out into the main tree structure of the site. This means that I am unable to put the Blog Archive into the site navigation. Does anyone know how to get the Blog Archive into the site navigation, or is the only way to link to it to provide a manual link from any page that you feel it should be available from?
    Thanks, Jules

    Different methods:
    Method 1. make a blank page of the white or black template , name it "Archive", drag and drop a fragment html, insert this code :
    <script type="text/javascript">
    parent.location.replace('http://urlof_your_blog_archivepage.html');
    </script>
    In this code replace http://urlof_your_blog_archivepage.html
    Now, the item "Archive" is in the menu, and your blank page redirects to your Blog Archive page,
    or
    Method 2. Don't display the navigation menu, do your own menu with links (inspector > link > hyperlink > link to my page ) with a link to your archive page (it is what I do on my [website|http://iweb.debutersurmac.com] ).

  • While synchronising it eats 1gb in the name of others which is specified by yellow colour may i know what is this

    while synchronising it eats 1gb in the name of others which is specified by yellow colour may i know what is this

    An other that large is due to corrupted files. To get it down to its normal of about 1/2 GB you need to restore you iPod.  Some times restoring from backup works but sometimes a restore to factory defaults/new iPod is required.

  • Iweb blog archive photos?

    My picture thumbnails aren't showing up in the blog archives. I thought the pictures were showing up before. What happened? I don't see an option for turning them on and off in the archives only on the mail blog page. Help?

    Thanks for that explanation. I was having the same problem and that fixed it. However, if you want this to work, you cannot have text wrap around the photo on the entry page. To have text wrap you have to cut and paste the photo into the text block. This appears to "erase" the attributes of "placeholder" from the image and it is therefore not recognized as such on the summary page. A nice fix would be for the designer to have the ability of inserting a placeholder into the text block. I don't see that option anywhere.

  • The file may be corrupt. The file header checksum does not match the computed checksum.

    I just put Vista Home Premium on a computer I was going to give to my son. Upon adding some hardware I kept getting the above screen. "The file may be corrupt. The file header checksum does not match the computed checksum.' When I booted in safe mode and slow boot, it hung on crcdisk.sys. I removed everything except the keyboard hhd dvd and fdd and it still does the same thing. I tried to reinstall Vista but it keeps hanging. From reading a lot of other threads this seems to be a big problem. I doubt if the product should have been marketed. But.... If anyone can help me get it booted I would like to try XP instead. I tried to install XP on the same drive and it hungs there too.

    Hi ballen6721,
    Thank you for the post.
    This issue can occur if the newly installed hardware device is incompatible with the system.
    Based on the current situation, I suggest trying the following steps to troubleshoot the issue:
    Method 1 Device Clean Boot
    ============================================
    Please unplug all unnecessary devices such as sound card, printer, network card and TV card.
    Method 2: Startup Repair from the Windows Recovery Environment (WinRE)
    ============================================
    1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
    2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. Click Repair your computer.
    5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next.
    6. At the System Recovery Options Dialog Box, click on Repair your computer.
    7. Click the operating system that you want to repair, and then click Next.
    8. In the System Recovery Options dialog box, click Startup Repair.
    Method 3: Use the Windows Recovery Environment (WinRE) to run System Restore ============================================
    1. Insert the Windows Vista installation disc into the disc drive, and then start the computer.
    2. Press a key when the message indicating "Press any key to boot from CD or DVD …". appears.
    3. Select a language, a time and currency, and a keyboard or input method, and then click Next.
    4. Click Repair your computer.
    5. In the System Recovery Options dialog box, choose the drive of your Windows installation and click Next
    6. At the System Recovery Options Dialog Box, click on System Restore.
    7. Follow the System Restore Wizard instruction and choose the appropriate restore point.
    8. Click Finish to restore the system.
    Note: If you computer is an OEM one, the method to enter WinRE can be different, you may contact your OEM to consult how to enter WinRE.
    Can we start the computer now?
    If the issue persists, please help confirm the following points:
    1. What hardware changes have you made recently?
    2. Can we enter Safe Mode now?
    I look forward to hearing from you.
    Best regards,
    Tim Quan
    Microsoft Online Community Support

  • Blog Archive Webpart Does Not List Posts When Publish Date is About early months,years in sharepoint 2013

    I create blog posts . Their publish date are different from now and their publish date are the early months. For example i create 30 blog bosts in 15.08.2014. But 10 blog posts' publish date is 15.04.2013,20 blog posts' publish date is 15.03.2012. I can
    not see them in the blog archive part. There must be April 2013 and March 2012 in the archive part,but i can not see them.
    How can i see them in the blog archive webpart?
    When i create a blog post, what is the main issue about the date? What is the main issue about date about grouping them.
    How can i show the blog posts according to the publish date not create date? İs it possible?
    Can you help me please?

    It seems you created another thread for same issue. Let's wait for the response from original thread, instead of creating a new one.
    http://social.msdn.microsoft.com/Forums/en-US/2a3f7d99-c74b-4554-94bf-e597a88b5425/blog-archive-webpart-does-not-list-posts-when-publish-date-is-about-early-monthsyears-in-sharepoint?forum=sharepointcustomization
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • Safari crashes w/ message that flash plug-in may be corrupted?

    I have been using Safari for sometime with a NYTimes start page. Suddenly a message appears that flash-plug-in may be corrupted. Safari crashes and does not load before any action can be taken.
    So I downloaded the uninstaller for flash player, reinstalled new player; the green light tells me it was installed successfully. Clicked on Safari, and same thing happened with only part of front page loaded.
    I then located the plug-in, trashed it, and clicked on Safari which then opened completely with message that since there was no plug-in the mime content could not load. Everything else worked OK.
    I really need the mime content on some of the Web Sites I visit, and am frustrated by being unable to re-install the flash player plug in. This happened suddenly, with no new installations that I can think of. My updates are current. I do not have intel. Can anyone help me solve this problem?

    ended up with "clean install" per Apple technician. Never
    discovered what caused problem, but feeling is that it was and Adobe problem which couldn't be solved.

  • Comments on Blog only appear on Blog Archive until I publish again

    I love to read the comments that people write but just recently I had to put a lot of blogs on at once and since then, the comments only appear when I got to the blog archive or when I re-publish. Why is this? What have I done differently and can some help me get this back to normal please?

    Hi Trevor,
    We had the same problem so I hired a VA on odesk.com to log in (to only be able to touch comments) and remove them all for a fixed fee - was cheap / worth it and quick. The spam protection has now greatly reduced them.
    P.S - I'm a massive fan of your podcasts!!
    Best,
    Lana

Maybe you are looking for

  • HT1918 what can i do if i have forgotton my answers to the security questions?

    recently got a new iphone due to some internal speaker issues with my old one... After getting it all setup and transfering my songs etc... over... when i go into the Apple Store or Itunes it asks me to answer some security questions to verify myself

  • How to change the components in a visible JPanel?

    How to change the components in a visible JPanel? Is there any way to change the components in a JPanel while it is already visible in a JFrame? I tried the na�ve approach of removing the components and adding new ones, but the effect is not the expe

  • Query Drilldown - Target Selection Screen

    When navigating from one query to another in SAP BW using RRI RSBBS, the target query selection screen is appearing. All of the parameters on the target query screen are optional so we are not expecting that the selection screen should popup. If the

  • Font size of a textview in Web Dynpro ABAP

    Hi Experts, How to increase the font size of a text view in Web Dynpro layout. I have tried the 'Design' property of the text view and made it 'Group Title', But i want even bigger font size. Pls suggest. Thanks,

  • Add New Server with Configtool Questions

    Hello All, We are running EP7 SP12 on W2K3 with 16GB RAM and 4 CPUs. As part of one the Go Live checks done to the system a while back, it was recommended that we increase the number of Server processes to the instance. So, I followed the information