Blog entries disappear when I save my iWeb site to a desktop file

I have designed a website using iWeb 08, and when I upload it to MobileMe, it looks fine. But I want to upload via FTP to another server. The first step is to save the site to a folder. Once I've done that, I'm invited to "visit site". When I do so, I see that entries on my blogs simply aren't showing up - blank pages with headlines instead. Any suggestions?

This might explain it:
Features Unavailable When Publishing to a Non-Mac Server:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
From iWeb 3's Help
OT

Similar Messages

  • When you save an iweb site, where is it located. I need to hand edit it

    I want to hand edit the lines in my website. When I click to save the site, the OS sens it somewhere but gives no clue where. How do I find the html file for my site

    Here's a short tutorial to find the Domain file.
    Copy the line below :
         ~/Library/Application Support/iWeb/
    Then in the Finder, do Command-Shift-G and paste the line.
    Hit return.
    You can also record the events with QT X screenrecording. Then you can play that movie again in case you forgot where the domain file is.
    You can also look it up in the iWeb Help.

  • Static NAT entry disappears when using NVI on Cisco 1921 (Multiple versions)

    We have a Cisco 1921 as an IPSec tunnel endpoint where we assign static NAT entries. It is a static one-to-one NAT putting each remote endpoint as a local /24 subnet. We are using NVI and we see some of these static entries disappear when packets are unable to reach the destination. 
    The production router is running 15.0(1r)M16 but we were able to reproduce this same behavior on 15.4(1)T2.
    To reproduce, we add the static NVI entry:
    ip nat source static X.X.X.X 172.30.250.11
    And things look good for a bit:
    ROUTER# sh ip nat nvi trans | i 172.30.250.11
    gre 172.30.250.11:0 X.X.X>X:0 Y.Y.Y.Y:0 Y.Y.Y.Y:0
    --- 172.30.250.11 138.54.32.9 --- ---
    tcp Y.Y.Y.Y:60360 Z.Z.Z.Z:60360 172.30.250.11:22 X.X.X.X:22
    There is a known issue with GRE traffic being dropped at this particular endpoint, so after generating GRE traffic, the entry completely disappears:
    ROUTER# sh run | i 172.30.250.11
    ROUTER#
    ROUTER# sh ip nat nvi trans | i 172.30.250.11
    gre 172.30.250.11:0 X.X.X>X:0 Y.Y.Y.Y:0 Y.Y.Y.Y:0
    icmp Y.Y.Y.Y:59916 Z.Z.Z.Z:59916 172.30.250.11:59916 172.30.250.11:59916
    tcp Y.Y.Y.Y:60360 Z.Z.Z.Z:60360 172.30.250.11:22 X.X.X.X:22
    I can reproduce this by severing the tunnel to any other remote site, and after generating GRE traffic to the downed endpoint, the corresponding static NAT entry will disappear.
    Debugging has not shown anything, and I have found some mentions of similar behavior on older versions. Has anyone seen this? We don't have support access to test all versions, so if it is known to be resolved in a particular one, we would love to know to work towards loading that version.
    Thanks

    Hi Ryan,
    Asa cannot ahve 2 default routes, it can only have one. ASA also doesnt support PBR, so the setup that you are trying to configure would not work on the ASA. Router is the correct option for it.
    Hope that helps.
    Thanks,
    Varun Rao
    Security Team,
    Cisco TAC

  • Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!

    Created PDF form in Acrobat XI Pro, but HELP fields disappear when I save FCDT file to PDF. Please help. Thanks!

    I am not aware of a field type "Help" within a PDF form. I do not see it as a form field that can be added in the form edit mode.
    Forms Central forms do not support all the features of Acrobat forms.
    Are you talking about the "Tool Tips" or a hidden field that only shows when one enters a field and is hidden upon exiting the field.

  • How do i save a iWEB site on an imac  and then  move to a laptop ?

    how do i save a iWEB site on an imac ( to what folder and where) and then transfer to a laptop ?
    Denis

    You transfer it via CD or flash drive or whatever. You install it by simply dragging and dropping the file into the folder on the new machine which corresponds to the folder where you got in on the old one.

  • How can I save my iWeb site as an interactive doco for a presentation? It is not published to the net.

    How can I save my iWeb site as an interactive doco for a presentation? It is not published to the net.

    mashett wrote:
    By interactive document I meant to function as a website with pages that are linked through what would be the hyperlink.
    That's exactly what you would get. Create a folder with a suitable name: publish to it. Zip it; email it. Tell them to start with the 'index.html' file inside the folder. The rest will follow - they will see it exactly as they would see an online site, links and all.
    Note that there is usually a 20MB limit on email attachments so if your site is image-heavy you might have a problem. An alternative is to post it to your webspace - you could post the zipped file and give them a link to it - that will download it (and it's a preferable way of handing a large file anyway, as they can download it at their convenience rather than being forced to in order to get their other mail).

  • When i save something, it is saved as a file and htm. i never had this with internet explorer. how do i just save as i would presume htm?

    when i save something, it is saved as a file and htm. i never had this with internet explorer. how do i just save as i would presume htm?

    Are you talking about IE's MHT or MHTML format for saving webpages in a single file format? <br />
    http://en.wikipedia.org/wiki/MHTML
    Two Firefox extensions that will "do" MHT files. <br />
    UnMHT extension: <br />
    https://addons.mozilla.org/en-US/firefox/addon/unmht/<br />
    Mozilla Archive Format - MAF <br />
    https://addons.mozilla.org/en-US/firefox/addon/mozilla-archive-format/

  • ITunes entry disappears when I move the cursor - up to 3 times

    A small but nevertheless annoying problem - very often an entry typed into iTunes e.g. Album or Genre will disappear when I move the cursor. This will happen up to three times in a row. Then the iTunes software accepts the change. Anyone else having this experience? Thanks, Adrian OS 10.7.5 ITunes 11.0.1

    Hello mine also same problem.
    It is irritating a lot form past few days.
    I uninstalled and reinstalled the adobe reader but no use.
    I am using Windows 7 and adobe version 11.0.09
    Kindly help in this regard.

  • Flash main application toolbar disappears when I save a file in cs4

    Hi
    When I save a .fla on my macbook (snow leopard OS) the main Flash CS4 application toolbar (the one with the minimize, maximize, hide buttons on it) disappears after the save dialogue has gone.  To get it back I have to re-launch the app.
    has anyone else noticed this?  I have checked for software updates but nothing seems to be addressing this issue.
    any help much appreciated
    thanks

    i keep getting this too!
    my tools panel disappears whenever i debug a movie or when i load flash up...
    hitting "reset workspace" brings it back the way i want it - but it get old REALLY fast
    this is a VERY annoying bug... i've tried all i could on my end, but it still does that....
    and if i save another workspace, with the tools panel placed elsewhere, then it's the properties panel that starts messing with me... so irritating
    this is going on since CS4, and has NOT been fixed in CS5....
    is there an "under the hood" fix for it? some config files i can delete or something?

  • Calendar entries disappeared when I shared it

    When I shared my calendar in the ICloud all of my entries disappeared.  I have turn it off the ICloud, rebooted, refreshed, still nothing.

    Go to another month and then back.
    Otherwise keep the Powerbutton and the Homebutton pressed at the same time until you see the Apple logo in your screen.

  • Blog entry page won't publish from iWeb and MobilMe....

    For some reason my blog entry page wont publish on my website. The rest of the site does, including my blog and archive, but not the new page. I do see the new page on the blog page, but when you click on it the new page has no text or pictures. When I published (uploaded) everything went as usual, I just can't see that page published. Any ideas?
    wordpicnerd

    Have you tried the File->Publish All to Mobileme menu option? That often will jump start a belligerent page.
    OT

  • Why are all my paths disappearing when I save some files as jpegs?

    I have 2 identical PSD files. Both have 10 different paths that are identical for each file. When I flatten and save one file as a jpeg the paths stay in the file just fine as is usually the case. When I open the jpeg the paths are still there as they should be.
    When I save the other file as a jpeg all the paths are there after I've saved the file and BEFORE I've closed the file. After closing and reopening the file the paths are all gone. If I save the same file as a tiff the paths all stay as usual.
    I've never seen this happen in almost 20 years of using Photoshop.
    Anybody have any ideas?
    Thank you

    I am NOT using "save jpeg for web" just to be clear.
    If I were, then the other image wouldn't be keeping any of its paths either.
    I am using "Jpeg" in the Save As dialogue box.
    If I edit the jpeg that lost its paths after opening it and hit "Save" it gives me the compression options dialogue box. Other jpegs just "save" when I hit save, I've never had a jpeg give me that dialogue box before when hitting just "Save".
    If, after opening the image that lost its paths, I paste a path into that image and hit "Save"(using one of the same original paths from the same original psd file), it gives me the compression dialogue box. If I complete the "Save" and reopen the image, voila, the path I pasted into it is still there, and, if I edit the image and hit "Save" it becomes normal again and saves without showing the compression options dialogue box.
    Photoshop CS6 version 13.0.5
    iMAC 27"
    12 gigs of RAM 5 gigs free
    800 gigs of free space on the system drive
    Snow Leopard 10.6.8
    Disk Permissions Repaired
    There really is no reason for this to happen. There are no differences in the images except for the content of the image and the file names.
    I have tried new file names and still the same result.
    I have tried working from the Desktop and still the same result.
    This is a serious bug.

  • When I save a pdf from Safari 7, the file is empty

    Before I upgraded to MAvericks and Safari 7 I used to be able to save pdfs to my desktop with no problem. However, when I save now, all I get is an icon. When I try to open it, I get the message that the file is empty, and sure enough when I go to info the size of the file is zero.
    As far as I can tell I am doing exactly the same as I was doing before upgrading.
    What is wrong? And idea how I can fix this?

    Better to save files to a designated folder in the Finder then the desktop.
    Desktop preferences may be corrupted.
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.desktop.plist
    Click Go then move the com.apple.desktop.plist file to the Trash
    Try saving a PDF file.

  • Does anyone know how to save an iweb site to dvd so that a Windows user...

    can put it in their computer and view it? This would be a hard copy of the site with all files. Have created a very media rich iweb site and am hoping to enable several people to view the site without accessing the internet.
    Thanks in advance for your suggestions. You all are always so helpful.
    Best,
    Kim

    Publish your Site to a folder and burn it to disk.
    The disk doesn't know it's a website.
    Your webpages have to be viewed in a Browser.
    And as long they do not contain outside links, there's no need for an Internet connection.
    Practice with a RW disk. Then you can erase the disk and start over.
    All kind of tricks such as autostart can be found on the internet.
    PS. Scan for virusses too, otherwise Windows and/or its users get hysterical.

  • White strokes disappear when I save for web

    I have white stroked lines in my document. when I try to save for web and devices the white lines are gone Illustrator CS3

    neither of these are selected. In addition a white box  that hides 
    type I don't want either disappears or becomes transparent in the 
    save for web and devices And my white type disappears

Maybe you are looking for

  • Click on a textbox, display alert and link to other page.

    hi, here i wanna do is when i click on a textbox, onFocus on it, then call a function to perform checking, and then if the textbox data have breakdown record then display an alert to the user and link to breakdown page. [Display out in a table] <%for

  • After upgrade to snow leopard, my printer won't print

    I recently upgraded my operating software to snow leopard, but now my wireless printer won't print any jobs coming from my Mac.  The printer icon is still in the dock, but every time I try to print something I get an error message, and it won't print

  • SQL loader - Zeros adding

    Hi All, My SQL loader is adding zeros into table. Please see below CTL file and Data CTL : Startdate DATE "MM/DD/YYYY" File has data : Startdate 03/04/12 04/05/12 07/03/12 Table data : 03/04/0012 04/05/0012 07/03/0012 My question is how can I avoid 0

  • Corrupt File (Error 4) Please Please help!!

    Hi All My mac crashed (for the first ever time!) when my portfolio must have been on in the background and all of a sudden it's saying the file is damaged! i've tried the different ways of opening/loading/moving/using a different machine but still no

  • FCP 5   Timeline "Text"

    Working on a project in FCP 5 that has several different text tracks.  Aside from a small icon, the tracks are all named "Text".  Is there some way I can have them automatically named by,  like the actual text?  Every time I have to change one of the