Blog entry error message

I have posted 21 articles in a blog, and all appear on my site except the first one -- I get an "Error 404 Not Found" message.
iWeb put this entry and the second entry into the same folder. The second entry and all the other entries work, but not the first entry. All the other entries are in their own separate folders. I tried moving the first entry to a new folder on the FTP site, but my ISP tech guy said the site is made to pull content out of the folders that iWeb made, so I can't just move stuff.
So how do I get iWeb to do this properly? I tried re-publishing the site, but I get the same result.
I can't seem to find a link for this type of Support on Apple's web site, and I don't think phone help covers software -- or am I wrong?
Could use help fast. Thanks.

It's been going on and off for me today and the only thing that has worked for me, is to keep trying. Close down iWeb, open it up and try again...and again. Eventually, in my case anyway, it works. Unfortunately, then it breaks down again and the cycle repeats.

Similar Messages

Addendum to "Blog entry error message"

I should have said that I published the site to a url other than a "dotmac account".
The domain is:
www.agelessandmoving.com (I made the site for my wife's business).
If anyone goes there, please let me know if you get the error message when viewing the blog. Thanks.
Is there an Apple phone number for a tech support person who could answer this, or am I dreaming?

you can do this...
at selection-screen.
if p_one is initial.
message e001 with 'enter the value for something'.
endif.
if s_matnr is initial.
message e002.
endif.

Error messages saying FireFox cannot do Google friends on my blog. Error Message Oops! Firefox could not find r1rk9np7bpcsfoeekl0khkd2juj27q3o-a-fc-opensocial.goo

Oops! Firefox could not find r1rk9np7bpcsfoeekl0khkd2juj27q3o-a-fc-opensocial.goo
THis is the error message on ALL blogs I write on or view. My FireFox cannot find my google friends. the message says GOOGLE and then the words above, OOPS. Firefox could not find........
HELP I have NO idea what to do. This is from how MY COMPUTER view blogs through Firefox for the past three weeks.

A few other thoughts:
(1) If you access Google in IE and click the padlock icon in the address bar to view the certificate, what do you find in the "Issued by" section as the issue? I have attached the info from Firefox for comparison; I don't have a modern version of IE on this PC.
(2) Do recall changing any encryption-related settings, either through the Options dialog or using the about:config preferences editor?
You could check for non-default settings as follows:
(A) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(B) In the search box above the list, type or paste '''ssl''' and pause while the list is filtered
If any of the preferences whose names start with network. or security. have been customized, they likely will be bolded and show "user set". Could you post those by right-click copying the preferences and then right-click pasting into a reply?

Transaction INVMON - Process Bill Entry - Error message EDEREG_INV590

Dear Gurus,
I'm trying to configure a supply scenario on the Supplier side, the objective is to updload grid usage bills and process them to create an agregated invoice on the grid contract account and also inculde this grid usage bills in the next periodic invoice of the customer, the first question is already if this is posssible, can we add the grid usage bill in the next periodic invoice of the costumer without recalculating it in our tarifs and just by taking the amount we received from the GRID?
When trying to process the document I'm receiving error message EDEREG_INV590:
No contract or service in invoice period 01.01.2014 - 21.08.2014 for sender N_IMEA
Where or how should I create the contract or the service that is missing, in the service provider I've already added the agreements for service provider agreement types INVINBOUND and REMOUTBUND, with from date 01.01.2000, the bill I'm trying to process has date 21.08.2014. And added all possible parameters for these two service provider agreement types.
Thanks in advance for your help,
Adriano da Silva.

hello Adriano,
maybe I can help.
As I understand you need a solution to take over the positions from the grid usage bill (wihich is from the DSO to you in role supplier) into the bill document (which you create in your role as supplier facing the end customer)
Such a requirement we cover in Germany with a so called SAP Consulting Solution named "eNNE - erweiterte Netznutzungseingangsverabeitung" which means in english language "extended Grid Usage Inbound Processing". This solution is not a SAP Product, it is an engineered service and contains code, which can be implemented into the customers system. The solution is customizable so that it can be tailored for the concrete customer needs (within the borderlines of the sultion ).
If you are interested it would be nice you contact me directly via mailto:[email protected] - unfortunatly I will be on vacation next week, but I will be back at September 8th.
Best Regards
Gerald Galka

Document Lock Entry Error Message

Hello,
I have an SAP EP 6.0, SRM4.0/EBP 5.0 system landscape. The shopping cart is used for document approvals as a workaround.
However, when a user clicks on the shopping cart document in the SAP Business Workplace Inbox, and tries to return to the initial page, using the "Back to Approval" link, a message is displayed saying
"the <user> is already processing the document>".
The SAP Notes 888306 and 751884 have been applied as recommended by SAP, but the error still continues.
I would appreciate any suggestions that will resolve this issue.
Thanks.
Collins.

Hi Collins
Did you check OSS note 897796 ?
Kind regards,
Yann

Blog entries on my web site don't show, error message

Hi everyone,
I'm fully aware that my question may be off topic since it is possible that my problem has to do with my internet provider rather than with iWeb. If so, I would like to apologise.
Now this is what is puzzling me. I made my first web site using iWeb, and it looks pretty promising. When I click on the index file, my browser starts and shows me that everything works. I even managed to publish the site to a folder and to send the files via FTP to my provider. Everything seems to work just fine, all the pages show up, except for one thing - the blog page. What happens is this - online with my browser, I can see the blog overview with the first ten lines of each article. However, when I click on one of the blog entries to see the whole thing, I get a 404 error message telling me that the requested URL was not found on the server. But the files are there! Is there a way to "link" the blog entry files with the overview again? Or should I talk to my provider?
Thanks for your help!
cu
Joerg

Okay, I did some more research (which I should have done beforehand, I know, so sorry for bothering), and it turns out that my problem has indeed to do with my provider. Obviously, iWeb creates file and folder names with german umlaut characters (for instance, "Einträge", which means "entries"). This resulted in conflicts with file name restrictions on the server - something whether Apple nor my provider told me about in the first place. I'm pretty disappointed about this. Anyway, the server could not correctly link to files which were there, but included characters the server did not want to understand.
The solution: A guy from switzerland has written a little app called iWeb Translator, which does the nasty job of translating "the whole iWeb-Site to match the provider's constraints". This did the trick. The link: http://sschoenb.blogspot.com/2007/08/iweb-and-umlaut-characters.html. Thank you, man!
cu
Joerg

NIPALU.dll entry point error message when launching application

A previously working application (written in VB6.0, using Measurement Studio 6 and NI-IMAQ1394) now has a fatal error message when starting:
"The procedure entry point _pkgModulePackageEventLog@20 could not be located in the dynamic link library NIPALU.dll".
This fatal error is only observed on some of our customers' systems, others work fine after the upgrade. WE NEED URGENT HELP!
Attachments:
Error Message Screen Shot.png ‏8 KB

MSOLAP$LocalCube cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted.
Hello,
It's just a guess: Power Pivot uses the MSOLAP = "Microsoft OleDB Provider for OLAP" and maybe that Provider is damaged on the machine. You may try to reinstall the Provider, you can get the installer named "SQL_AS_OLEDB.msi" from
Microsoft® SQL Server® 2012 SP2 Feature Pack =>
ENU\x86\SQL_AS_OLEDB.msi (for 32 bit)
Olaf Helper
[ Blog] [ Xing] [ MVP]

New blog entries experience "error updating .Mac", and no "add comments"

Blog always worked fine. Now new blog entries get error updating .Mac message. New post does appear online, but there is no Add Comments option, despite it being selected in the inspector. Also, the blog main page doesn't show a title in the title bar at top. Might this have something to do with the new Mobile Me features (which I haven't tried or signed up for). When I delete the new posting and publish, it publishes fine. This error even happens with the template pg, so it's not anything to do with my formatting. Thanks for your help.

I have not tried publishing a new Blog entry since the new "me" thing, but I did try just a text edit on an existing Entry and republished the Entry. It seemed to function normally.
However, all of my Comments are missing from all my Blog entries - although the hit counts are still there.
And my Slide Shows won;t work and thumbnails won't enlarge on my photo pages.
Everything was working perfectly before this big "improvement" we just got.
I sure hope this is temporary or I just might throw a fit. There was a lot of valuable stuff in those comments, and if there won;t be a Comments function at all, I won't be able to keep my blog at mac. com or me whatever.
Why fix what isn't broken?
jessica

Error message when clicking on links from thunderbird: Firefox.exe – Entry Point Not found

When I click on any link in a Thunderbird email message I get the error message:
Firefox.exe – Entry Point Not found
The procedure entry point ?DllBlocklist_Initialize@@YAXXZ could not be located in the dynamic link library T:\PQligP sFuvy (X86)\pJPpSox HneiCFv\GwCMqTQ.Oqt.
I tried uninstalling Firefox 27 completely and reinstalling it, and the error is still there. When I uninstall V27 and install the older V26 the error disappears. Id there an issue with V27 trying to work with links from Thunderbird?
I am on a laptop running Windows 8.1 with all current downloads.

Thanks for the reply - as best as I can tell it seems to be some kind of incompatibility between Thunderbird V24.3.0 and Firefox V27. If I install Firefox V26 then everything works as it should. I haven't tried installing a previous version of Thunderbird to see if that makes a difference.

When I allowed an upgrade to Itunes on my HP Windows 7 computer now I have this error message when I turn on my computer: AppleSyncNotifier.exe-Entry Point Not Found. The the explanation in the dialogue box says: The procedure entry point sqlite3_wal_

Error message after allowing an upgrade:My dialogue box in the error message says: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll--this happened after I allowed an upgrade to be installed. I have HP Windows 7. Now my Iphone will not sync. What do I do?

Found this fix here which worked for me with a similar problem.
https://discussions.apple.com/thread/3196594?start=0&tstart=0
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well.

I blog on TypePad using Word 2007 and documents freeze when I'm looking at them in Windows explorer; why do I get the error message that Mozilla is looking for a script?

I have now had two error messages - the first one looked for this script: Script: resource://gre/modules/XPCOMUtils.jsm:258. The second one (today) looked for Script: resource://gre/components/nsPrompter.js:68.
I have reset my word template, also reset word registry for data and options (as per Microsoft's help pages) for both those 'fixes' there was an initial improvement, but the problem happened again after I reposted on my blog today and then went to Windows explorer to view my files. It seems to 'seize' as I select a file, so that the preview does not appear (for up to 15-20mins).
I see on the internet using the second script as a search just now that one other has had a similar problem and one also since Mozilla 4 upgrade. My problems have also been pretty much since I upgraded.
It happens (apart from my fixes) every time I go to look at a word document via Windows explorer. Excel files are less affected.
One web suggestion is to clear the cache, but I am hesitant to lose all my passwords unless I have to.

I still have the problem although I uninstalled Mozilla (clearing the cache didn't work and neither did Word diagnostics), so have ended up thinking it could be Norton (the manual update worked x1) or Windows. Today I found an answer: disable the preview pane in Windows Explorer - there's a history of problems with this view.

While trying to open the order in co03 or co02, It is not opening and showing the error message as "Inconsistent data : order 107434 16.09.2013, duplicate entry o 0020. is showing ?

Hi,
While trying to open the order in co03, co02, I am getting the below error message : Inconsistent data : order 107434 16.09.2013, duplicate entry o 0020 is showing. Please guide me the way forward.
Regards,
Mastan.

Hi Mastan
The report mentioned by Rajen should clear the inconsistent records.
Please observe that you could have found this by yourself report with a quick note search for this error message or even searching for old threads.
Even a google search points to the solution.
You should do your own research before opening such kind of thread.
BR
Caetano

I can no longer start FF and am getting this error message in a pop up box: The procedure entry point XRE_FreeAppData could not be located in the dynamic link library xul.dll. How do I resolve?

Please help

Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

Error message in MIRO entry: Message no M8285

During the Invoice verification entry (MIRO), for a USD invoice (Company code currency is INR), I am getting the following error message "Balance in USD Currency Type 10" Message no M8285
The document is successfully getting stimulated in USD currency but when attempted to post, this message is displayed
During invoice entry, the system is taking the exchange rate maintained in OB08 for the posting date. Any clue to the cause of the problem?

HI,
search SAPNET notes using "MIRO" and "M8285" as search terms. There are some notes, check especially 1319322.
Best regards, Christian

MIRO : Error message for a duplicate entry

Hi,
When we enter In MIRO an invoice with the same informations as another invoice that was already posted, the system display a Warning message like the following :
Message no. F5117
Check whether document has already been entered with number 1900000008 2009
Please how to make this message as an Error message ?
Regards.

Hi,
Use tcode OBA5. Give application area as F5 and press enter. Once inside, go to new entries, and in message no. type 117. give E against online and batch and press enter. then save.
AshFICO

Blog entry error message

Similar Messages

Maybe you are looking for