Blog not "processing" requests for comment.

New issue for me with blogging. When site visitors attempt to add a comment, they receive this message:
We're sorry. We are having a problem processing your request.
I go the iWeb and re-publish. It works once and then goes back to "problem processing" message.
HELP PLEASE!

There is a solution for that problem. First make sure that the 'Leave Comments' checkbox in your inspector is actually checked. Then go the Files Menu and use the 'Publish All to MobileMe' Option. After you're done publishing make sure that your users go to the right URL. Your Site exists twice... under your .Mac URL and under the new Mobile Me URL. Make sure that your user got the the ...//web.me.com... URL. That should take care of the problem.
Hope that helps!

Similar Messages

Certificate issues Active Directory Certificate Services could not process request 3699 due to an error: The revocation function was unable to check revocation because the revocation server was offline. 0x80092013

Hi,
We have some problems with our Root CA. I can se a lot of failed requests. with the event id 22: in the logs. The description is: Active Directory Certificate Services could not process request 3686 due to an error: The revocation function was unable to
check revocation because the revocation server was offline. 0x80092013 (-2146885613). The request was for CN=xxxxx.ourdomain.com. Additional information: Error Verifying Request Signature or Signing Certificate
A couple of months ago we decomissioned one of our old 2003 DCs and it looks like this server might have had something to do with the CA structure but I am not sure whether this was in use or not since I could find the role but I wasn't able to see any existing
configuration.
Let's say that this server was previously responsible for the certificates and was the server that should have revoked the old certs, what can I do know to try and correct the problem?
Thank you for your help
//Cris

hello,
let me recap first:
you see these errors on a ROOT CA. so it seems like the ROOT CA is also operating as an ISSUING CA. Some clients try to issue a new certificate from the ROOT CA and this fails with your error mentioned.
do you say that you had a PREVIOUS CA which you decomissioned, and you now have a brand NEW CA, that was built as a clean install? When you decommissioned the PREVIOUS CA, that was your design decision to don't bother with the current certificates that it
issued and which are still valid, right?
The error says, that the REQUEST signature cannot be validated. REQUESTs are signed either by itself (self-signed) or if they are renewal requests, they would be signed with the previous certificate which the client tries to renew. The self-signed REQUESTs
do not contain CRL paths at all.
So this implies to me as these requests that are failing are renewal requests. Renewal requests would contain CRL paths of the previous certificates that are nearing their expiration.
As there are many such REQUEST and failures, it probably means that the clients use AUTOENROLLMENT, which tries to renew their current, but shortly expiring, certificates during (by default) their last 6 weeks of lifetime.
As you decommissioned your PREVIOUS CA, it does not issue CRL anymore and the current certificates cannot be checked for validity.
Thus, if the renewal tries to renew them by using the NEW CA, your NEW CA cannot validate CRL of the PREVIOUS CA and will not issue new certificates.
But it would not issue new certificates anyway even if it was able to verify the PREVIOUS CA's CRL, as it seems your NEW CA is completely brand new, without being restored from the PREVIOUS CA's database. Right?
So simply don't bother :-) As long as it was your design to decommission the PREVIOUS CA without bothering with its already issued certificates.
The current certificates which autoenrollment tries to renew cannot be checked for validity. They will also slowly expire over the next 6 weeks or so. After that, autoenrollment will ask your NEW CA to issue a brand new certificate without trying to renew.
Just a clean self-signed REQUEST.
That will succeed.
You can also verify this by trying to issue a certificate on an affected machine manually from Certificates MMC.
ondrej.

Could not process request

I am new to this so sorry if I have got it all in the wrong place, but....... I have previously down loaded stuff from the App store with no trouble and haven't changed anything. Trying to download a free app game yesterday ang again this morning I got ' could not process request, please try again later' is this something I am doing wrong or is it an I tunes thing. Can anyone advise please? Thanks

I am new to this so sorry if I have got it all in the wrong place, but....... I have previously down loaded stuff from the App store with no trouble and haven't changed anything. Trying to download a free app game yesterday ang again this morning I got ' could not process request, please try again later' is this something I am doing wrong or is it an I tunes thing. Can anyone advise please? Thanks

Could not support request for background processing

Hello,
We have a .NET 1.x application with CrystalReportViewer control.
The application is running on a windows terminal server with approximatively 5 users using the applications and 10-20 logged on doing other stuff.
When the user tries to preview the report using the CrystalReportViewer object , the following exception is "sometimes" thrown
[translated from dutch]
CrystalDecisions.CrystalReports.Engine.InternalException:
error in file C:\Users\*username*\AppData\Local\Temp\35\{B8D10435-A104-4422-A220-6DB483DFC285}.rpt:
The request could not be submitted for background processing. ---> System.Runtime.InteropServices.COMException (0x800002AD)
The application then terminates and if the user restarts the application attempts to reload the report, it usually loads with no problem .
It can not be intentionality reproduced but it does happen frequently.
I have been Googling for this problem , but havn't found any solution.
On this website however a link is provided to a BO KB article with a possible solution:
http://aspadvice.com/blogs/rjdudley/archive/2005/10/26/13443.aspx
However, the article appears to require a login, my SAP CR account i used to register on these forums does not to work.
What can we do to determine the exact cause of this problem, or are there any known solution for this problem ??
If you need any more information please do ask.
also,
We have a licence for CR 11 and so does our client, what steps would we need to undertake to get professional /payed support from SAP crystal reports for techinal issues like this, is there a way to open a support ticket ?
Thank you very much for your time, any help is appreciated !
Willem

Hello:
First I have to apologize for the troubles with CR 11.5 - not sure why that would be, but your frustration is understood. Perhaps sometime in the future we can look at this in another thread (e.g.; it should just work...).
Anyhow, there is really no compeling reason for you to go to CR 11.5 (there are reasons (see below), but 11.0 is fine with framework 1.1).
So to start off. Version 11.0.0.895 will need to be updated to SP4. See this|http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReports2008%28and9.1%2CXIR1%2CXIR2%29-VersionandDownloadinformationforServicePacks] wiki. As you can see in the wiki, the latest version of CR 11.0 is updated to SP 4 with a version of 11.0.9500.x. Before we even start to look at this, you will have to get to SP4.
Re. preference for CR 11.5. If the issue is not resolved with CR 11 Service Packed to SP 4, all we have left is; going to CR 11.5 - with the latest SP (SP6) as that is the version I would be testing with. Note that CR 11 is completely out of support now, CR 11.5 is out of patch support (e.g.; no fixes) and any support terminates in June of this year.
And we have not even started to work the issue. Re-reading your initial post, I am starting to suspect that loading may be the root of the issue here. I'd recommend having a peek at the following:
http://www.sdn.sap.com/irj/boc/go/portal/prtroot/docs/library/uuid/d08468e2-a81d-2b10-faa9-9837f58ee1c2
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7025839b-00d4-2b10-33b4-cf0aa9e08412
The following article specifies CR 2008, but most if not all the points will apply to CR 11.0 also:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/7025839b-00d4-2b10-33b4-cf0aa9e08412
The below will also be good to be aware of:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40bccdfd-88a6-2b10-1da1-c47a54b625a7
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0070692-01a8-2a10-4797-ff0f5f73e1e1
The following articles were written by me and may also apply:
[Crystal Reports Maximum Report Processing Jobs Limit|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/f053713e-3e3d-2c10-2a81-f79259e54023]
[Improving Crystal Reports Performance in Visual Studio .NET Applications|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8029cc96-6ff3-2b10-47a2-b30ea790ea5b].
I realize I've thrown a lot of info in here, but all of it may apply. In a way I feel like we've ended up across the river without crossing the bridge first, but let's see what comes out of all of this (teleporting worked for Captain Kirk ).
- Ludek
Edited by: Ludek Uher on Mar 10, 2011 7:25 AM

SPNego - J2ee did not send request for authentication

Hi All,
I have configured SPNego and completed all setup as per documentation. When I use the browser to access the portal, it is prompting for user id and password. If we manually enter the id and password on AD, it works fine. Somehow not able connect to j2ee without prompting for id and password.
To troubleshoot this, traced the http traffic using winshark and found that j2ee engine did not send any request for kerberos authentication.
Is there way to check on the server side to make sure spnego is configured properly and server is able to send kerberos authentication ?
Appreciate your help !
Thanks!

Login to your Visual Admin, then go to -->Security Provider -->com.sun.security.jgss.accept -->Krb5LoginModule
Add a Parameter isInitiator and Value false. Save it and take a bounce of J2EE.
This should solve your login page problem Otherwise paste the default trace.
You can also read my BLOG : Common SPNEGO Implementation Issues
Reward points if my suggestion was helpful -

DETAILED FISCAL YEAR VARIANT NOT PROCESSED error for 2lis_03_UM DS

Hi Guru's,
Note: Im trying to implement the SNAPSHOT process for the Inventory load.
Im loading data from 2lis_03_UM to cube 0IC_C03 through an infosource generated by me (7.0 version infosource).
The data is loaded successfully upto PSA.
While loading data through DTP i'm getting this error:
"DETAILED FISCAL YEAR VARIANT NOT PROCESSED".
Even i didn't mapped any Fiscal Year variant or there is no field for fiscal year variant in the cube.
Did anyone faced this type of error.
Please guide me.

dear shiv,
the same error in same same scenario. can you please tell me the solution for this error. ef you dont mine can you please give me a call or miss call for that error. so i can resolve on phone.
my no.9769497378
thanks
Anil

Sync of Notes - annoying request for confirmation

I sync my MS Outlook Notes between the PC and the iPhone. Whenever I make changes to the Notes on the iPhone, during the sync, the confirmation box shows up asking to confirm that I want to change Notes on the PC. This request for confirmation is really annoying. It doesn't come up if changes were made on the PC and are being synced to the iPhone. How can I stop this annoying request for confirmation?

iTunes > Edit menu > Preferences > Devices tab, change the threshold for change notification.

[SOLVED] EurKEY PKGBUILD request for comments

Hi, I just finished a PKGBUILD for EurKEY "European Keyboard Layout". It installs and removes fine on my system, and I took care to respect the packaging standards, but before submitting it to AUR I would like to get any comments/suggestions.
PKGBUILD
# Maintainer: Christoph Roeper <cr (at) roeper (dot) biz>
pkgname=eurkey
pkgver=1.1
pkgrel=1
pkgdesc="The European Keyboard Layout"
arch=('any')
url="http://eurkey.steffen.bruentjen.eu/"
license=('GPL3')
depends=('xkeyboard-config' 'sed' 'gawk')
install="$pkgname.install"
source=(http://eurkey.steffen.bruentjen.eu/download/debian/binary/eurkey.deb)
md5sums=('8da8472f8f8d30baaa6a50145264024b')
package() {
cd "$srcdir"
ar x $pkgname.deb
tar xzf data.tar.gz -C "$pkgdir/"
cd "${pkgdir}"
# euro on '5', swap with pound
awk='\
BEGIN { fix = 0 } \
if ( $2 == "<AE04>" ) { $7="sterling,"; fix = 1 } \
else if ( $2 == "<AE05>" ) { $7="EuroSign,"; fix = 1 } \
if ( fix == 1 ) { printf "%11s %s %s %s%16s%19s%22s%21s %s %s\n",$1,$2,$3,$4,$5,$6,$7,$8,$9,$10; fix = 0 } \
else { print } \
file="usr/share/X11/xkb/symbols/eurkey"
tmpfile="$file".`date +%FT%T`.temp
awk -- "$awk" $file > $tmpfile
cat $tmpfile > $file
rm $tmpfile
pkgname.install
post_install() {
# Installs the EurKEY layout.
if test "$EUID" = 0; then SUDO=; else SUDO=sudo; fi
exec $SUDO bash /dev/stdin "$@" <<'ENDSUDO'
set -e
str=" <layout>\n\
<configItem>\n\
<name>eurkey</name>\n\
<shortDescription>EUR</shortDescription>\n\
<description>EurKEY</description>\n\
<languageList>\n\
<iso639Id>cat</iso639Id>\n\
<iso639Id>dan</iso639Id>\n\
<iso639Id>eng</iso639Id>\n\
<iso639Id>est</iso639Id>\n\
<iso639Id>fao</iso639Id>\n\
<iso639Id>fin</iso639Id>\n\
<iso639Id>ger</iso639Id>\n\
<iso639Id>gre</iso639Id>\n\
<iso639Id>gsw</iso639Id>\n\
<iso639Id>ita</iso639Id>\n\
<iso639Id>lav</iso639Id>\n\
<iso639Id>lit</iso639Id>\n\
<iso639Id>nld</iso639Id>\n\
<iso639Id>nor</iso639Id>\n\
<iso639Id>por</iso639Id>\n\
<iso639Id>spa</iso639Id>\n\
<iso639Id>swe</iso639Id>\n\
</languageList>\n\
</configItem>\n\
</layout>\n\
</layoutList>"
for file in /usr/share/X11/xkb/rules/{base,evdev}.xml; do
if [ ! -f "$file" ]; then
echo "File $file is not a regular file (skipped)"
elif [ $(grep -ci eurkey "$file") -ne 0 ]; then
echo "File $file already constains eurkey (skipped)"
else
echo "processing $file"
sed -i "s~</layoutList>~$str~" "$file"
fi
done
ENDSUDO
pre_remove() {
# Removes the EurKEY layout.
if test "$EUID" = 0; then SUDO=; else SUDO=sudo; fi
exec $SUDO bash /dev/stdin "$@" <<'ENDSUDO'
set -e
for file in {/etc/vconsole.conf,/etc/X11/xorg.conf.d/*keyboard*}; do
if [ -f $file ]; then
[ `grep -ci '^\s*[^#].*eurkey' $file` -ne 0 ] && echo -e "Cannot completely remove EurKEY since it's still configured in $file.\nPlease remove it manually or use the settings manager." && exit 1
fi
done
exit 0
ENDSUDO
post_remove() {
# Removes the EurKEY layout.
if test "$EUID" = 0; then SUDO=; else SUDO=sudo; fi
exec $SUDO bash /dev/stdin "$@" <<'ENDSUDO'
set -e
awk='
BEGIN { output = 1 ; buffer = "" }
$0~/<layout>/ { output = 0 ; deleteSection = 0 }
output == 1 { print $0 }
$0~/<\/layout>/ { output = 1 ; buffer = buffer $0 ; if (deleteSection == 0) print buffer ; buffer = "" }
$0~/<name>eurkey<\/name>/ { deleteSection = 1 }
output == 0 { buffer = buffer $0 "\n" }
for file in /usr/share/X11/xkb/rules/{base,evdev}.xml; do
if test -f "$file"; then
tmpfile="$file".`date +%FT%T`.temp
echo "processing $file"
awk -- "$awk" $file > $tmpfile
cat $tmpfile > $file
rm $tmpfile
fi
done
ENDSUDO
'sed' and 'awk' are neither build nor run-time dependencies, both are install dependencies, but I did not find a proper option for that.
The (un-)install-scripts are taken from the Debian source, however with deb-packages it is obviously possible to abort pre/post_remove on failure (here used if the keyboard layout is still in use => no uninstall). I did not find a proper way to accomplish this with PKGBUILD install scripts.
Both scripts a rather long, but in other review requests forum veterans preferred to have scripts posted here instead of a link to AUR or pastebin. If it's nevertheless wrong I will relocate the scripts.
Thanks in advance.
Last edited by roepi (2014-03-17 17:42:44)

If you still want to modify the XML, I would use xmlstarlet instead of awk/sed. I haven't tested the following scripts so they will probably need some debugging but they should give you a general idea of what I would do.
The post remove script would be reduced to:
set -e
# xpath selector to select layouts that are named eurkey
xpath='/xkbConfigRegistry/layoutList/layout/configItem/name[text()="eurkey"]/../..'
for file in /usr/share/X11/xkb/rules/{base,evdev}.xml; do
[[ -f "$file" ]] && xml ed --inplace -d "$xpath" "$file"
done
And the post install script would become:
set -e
xpath='/xkbConfigRegistry/layoutList/layout/configItem/name[text()="eurkey"]'
for file in /usr/share/X11/xkb/rules/{base,evdev}.xml; do
if [[ ! -f "$file" ]]; then
echo "File $file is not a regular file (skipped)"
elif xml sel -t -c "$xpath" $file >/dev/null; then
echo "File $file already constains eurkey (skipped)"
else
echo "processing $file"
xml ed -P -L \
-s /xkbConfigRegistry/layoutList -t elem -n layoutTMP -v '' \
-s //layoutTMP -t elem -n configItem -v '' \
-s //layoutTMP/configItem -t elem -n name -v 'eurkey' \
-s //layoutTMP/configItem -t elem -n shortDescription -v 'EUR' \
-s //layoutTMP/configItem -t elem -n description -v 'EurKEY' \
-s //layoutTMP/configItem -t elem -n languageList -v '' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'cat' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'dan' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'eng' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'est' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'fao' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'fin' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'ger' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'gre' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'gsw' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'ita' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'lav' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'lit' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'nld' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'nor' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'por' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'spa' \
-s //layoutTMP/configItem/languageList -t elem -n iso639Id -v 'swe' \
-r //layoutTMP -v layout \
"$file"
fi
done

Request for Comments and Experiences with Streams Advanced Queuing

Hi,
I would like to get some feedback about what your experiences with Streams Advanced Queuing. What do you like about it? What don't you like? How do you use it? What features would you love to see in it? Please post to the forums. Thanks!

I love the new homeless Instant Client! I wish we had it years ago. Some comments:
1) The MS ODBC administrator GPF's (blows up) when trying to configure a new data source using the new Oracle IC drivers. Have to hand-edit the registry.
2) I heartily agree with the request that the new client install without requiring the normal Oracle installer. It's just too bloated for easy deployment. I'd rather hand install the files than to have to use that. Also, .zip not .jar please.
3) Need better documentation on the connection string options. It took me 3 weeks to figure out that what used to be scott/tiger@mydb is now scott/[email protected]:1524/mydb.xxx.yyy (it's looking for the GLOBAL_NAME, not the SID and TNSPING won't show you that! Doh!)
4) Please let us specify a range of ports (e.g. :1521-1524) and let it figure out where the SID is on that machine. We move ours around and don't want to update hundreds of clients with hardcoded command lines.
5) Maximum backward compatibility, please! It's not easy moving all those Oracle apps to 8.1.7.4+ databases, yet, but my old OCI client programs should not have to care. I don't want to have 2 SQL*net driver stacks on my PC's.
Thanks -- I'll be watching for new features.

SIRI not processing requests...Servers Overwhelmed?? iOS7 ver

Ever since the launch of 5s/5c, about 1/3 of the time when I ask Siri to make a call or provide directions, there is a big delay followed by a message that the request cannot be processed at the present time. This happens at all times of the day, not just at commute times.
I read that Siri functionality was extended with the release of iOS7...well, for me it has also become less reliable/available in the process. Did anyone else experience this problem? (I have hard rebooted my phone, so it is not due to some cruddy software remnants on my iPhone 5).

Hi Apple Product LOVER,
Thanks for visiting Apple Support Communities.
According to the system status page, Siri is running normally. If you continue to see unexpected behavior with Siri, the additional steps in our iPhone troubleshooting assistant can help:
http://www.apple.com/support/iphone/assistant/phone/
Best,
Jeremy

Concurrent managers not processing requests

Hi,
Today I met with a strange issue. My concurrent managers are up and running/there is no errors written in alert.log file on db node.
But when when I submit any request then it is not getting proceed. it gets Pending/Normal status. and there is no other request which is currently running in system.
I stopped Internal concurrent manager using adcmctl.
I ran cmclean.sql then tried to resubmit request. but still I am getting same status.
Can anyone please help me ASAP.
Thanks in advance.
Nish

Today I met with a strange issue. My concurrent managers are up and running/there is no errors written in alert.log file on db node.Please post the details of the application release, database version and OS.
But when when I submit any request then it is not getting proceed. it gets Pending/Normal status. and there is no other request which is currently running in system.
I stopped Internal concurrent manager using adcmctl.
I ran cmclean.sql then tried to resubmit request. but still I am getting same status.
Can anyone please help me ASAP.What about the CM log file?
Please bounce the database/application services and check then.
Thanks,
Hussein

Better Certification Board recommendations (Request for comments)

Now for something completely differerent:
Jordan, I appreciate what you tried to do with the Solutions for Review thread but... The latest exchanges (and a few others) on this thread I feel demonstrate why the "Mega-Thread" has already outlived its usefulness. There a a lot of good tidbits and side discussions buried in this thread that would be much more searchable and cohesive if the posters started their own threads.
Perhaps some new board suggestions for effectivness could be floated in place of the "Sample Exam Solutions for Review"?
Tips on CLD Solutions for review:
Start a new thread - indicate there will be a CLD example for review in the subject line.
For follow-up discussions on critique points start a new thread with a link to the example and a subject about the point under discussion.
This should allow the frequent fliers on this board the chance to develop a useful body of theads where specific points related to Cert specific preparation and concepts can be gathered and easily cross linked by the heavy hitters (And who knows, easilly searched by the certification candidates)
As the board grows I would hate to lose some "gems" in the noise. If we get together now, to think about what this boards goals are we can maximize our return on investment in supporting certification.
All comments welcome. Jordan, please consider floating this discussion for maximum visibility.
Jeff

I think that's a great idea - centralise the submissions and decentralise the critiques.
Another idea to improve the Certification Board might be to introduce subforums for each of the various types of certification (CLAD, CLD, CLA, etc.).
Certified LabVIEW Developer

Request for comment - inventory synchronization

Representing product manager for zed E-Commerce I'm inviting anyone who is familiar with Web tools to provide feedback on the following proposed functionality.
Inventory synchronization in web tools in the past has always been a point of contention and now that we can move forward with features and enhancements to the product we would like to gain your insight on how you would like to see this functionality improved.
Currently in web tools there is a calcuation that is done upon every synch between B1 and Web tools that determines the value that is used to show whether an item in web tools is "out of stock". This has several implications, one being that the item is then displayed on the customer facing site with a warning icon and text is shown on the checkout page indicating that an item is out of stock.
The calculation that is run is On Hand - Commited + On Order. Meaning if you have 10 items on hand, 11 of them have been ordered by customers, and 4 more are on order to be delivered from a vendor the number shown in web tools will be 3, and the display of the item will not show "out of stock" on the site.
One of the things being considered is having the option of using this query as it stands or to use an alternate query of On Hand - Commited and not include On Order, because the timing of the On Order items might be weeks and it is not preferrable to take orders when there is no in house quantity on hand.
Another option would be to have the ability to choose if when an item is out of stock, to automatically make it unavailable on web, which is a UDF on Item Master, thereby hiding it from display on the commerce site, and if a user has it in their cart, they must remove it before checking out(current functionality)\
Let us know your thoughts,
Thanks
-Bryce Blilie
otherwise now known as guest

Hi Bryce,
Certainly from my experience so far no customer wants the count / availability flag determined on the basis of available stock in B1 ( On hand - customer orders + supplier orders ). I have had to customise the count to exclude the supplier orders in order to provide a 'free stock' figure The option to select the calculation method would be welcome.
It may be useful to consider whether some options can be built into the availablity text which is currently based on the above figure. The 'In stock' and 'not In stock' is limiting and confusing as it is currently based on 'available stock'.
These days it is much more common to find some gradation and you might want to consider some mechanism for allowing options depending on the stock count for example:
not in stock    ( based on free stock )
less than x     /   low stock please call for availability ( where x is at or below minimum stock )
sold out   / y in z days ( where y is supplier orders and z is based on lead time)
The option to remove an item based upon the free stock would also be welcome although I have not yet been specifically asked for it

Process request for multiple VO's

my page is having 3 table regions and all the three table come fom different VO.Can someone tell me how to get the data at the time of page getting displayed for all the vO's.
Thanks for your help

Hi Reetesh,
This is my code:
public void processRequest(OAPageContext pageContext, OAWebBean webBean)
super.processRequest(pageContext, webBean);
OAApplicationModule theAM = pageContext.getApplicationModule(webBean);
OATableBean table = (OATableBean)webBean.findIndexedChildRecursive("IndexRN");
if ( table == null ) {
MessageToken[] tokens = { new MessageToken("OBJECT_NAME", "IndexRN") };
throw new OAException("MTH", "MTH_OBJECT_NOT_FOUND", tokens);
Boolean executeQuery = BooleanUtils.getBoolean(false);
Serializable[] parameters = { executeQuery };
Class[] paramTypes = { Boolean.class };
theAM.invokeMethod("init", parameters, paramTypes);
table.queryData(pageContext, false);
table.setTableSelectionText( "Hierarchy: " );
table.prepareForRendering(pageContext);
OATableBean table1 = (OATableBean)webBean.findIndexedChildRecursive("UsageCategory");
if ( table1 == null ) {
MessageToken[] tokens = { new MessageToken("OBJECT_NAME", "UsageCategory") };
throw new OAException("MTH", "MTH_OBJECT_NOT_FOUND", tokens);
Boolean executeQuery1 = BooleanUtils.getBoolean(false);
Serializable[] parameters1 = { executeQuery1 };
Class[] paramTypes1 = { Boolean.class };
theAM.invokeMethod("init1", parameters1, paramTypes1);
table1.queryData(pageContext, false);
table1.setTableSelectionText( "usage category: " );
table1.prepareForRendering(pageContext);
But still I am able to view the data only for first VO.Is my query not correct.
Thanks ,
Amrit

Module Business Processes (request for detailed website links)

Hi,
I'd like to learn more about the different Business processes inside all of the SAP modules. For instance, I'd like to know what Business Processes are included in each SAP Module, what they do, how they are used, what their specific objectives/outlines/uses are and etc.
Please provide online links and documentation that can help me learn more about what each module is and does (in terms of the module specific business processes.)
Any and all help will be greatly appreciated.

Hello John,
Take a look at this.
https://websmp202.sap-ag.de/bestpractices
Detailed information on all SAP Best Practices scenarios (Scenario Overview, Business Process Procedures, Installation Guides etc.) can be found in the SAP Help Portal (http://help.sap.com/)
Cheers !

Blog not "processing" requests for comment.

Similar Messages

Maybe you are looking for