Blog server not displaying OD user blogs after restart after 10.5.7 update

I've just applied the 10.5.7 update and after reboot the blog/wiki service shows blogs for local user accounts, but not for accounts from the Open Directory (not allowed message). However all accounts are accessible if I stop and start the wiki manually by the folowing caommand in terminal:
sudo serveradmin stop teams
sudo serveradmin start teams
Is anyone else having this problem? If so, any idea how to get a fix in place?

Suggest you read my tip at
http://discussions.apple.com/thread.jspa?threadID=2004922&tstart=0
on how to get 10.5.7 to display in you installed updates
System Preferences/Software Update/Installed Updates

Similar Messages

Weather not displaying in notification center after iOS 5 update not to mention the entire user interface is much more sluggish.

Weather not displaying in notification center after iOS 5 update not to mention the entire user interface is much more sluggish.

Okay, mine now works here is what I did.
plug in the iPhone, iPad etc
in iTunes select the phone or iPad
Under Summary uncheck "Sync with this....."
Under "Music" uncheck the "Sync Music"
Let it remove all the songs, dont worry it will come back no problems.
Once that is all done all the music on the phone or ipad should be gone.
Now check them both back on and everything should copy back onto it.
Working now !!!!!

Windows 8.1 do not display last user

Hello,
does anyone know how to prevent the last user name being presented after restarting Windows 8.1 PC. Not a problem with Win7 etc as can disable interactive logon etc, but cant make it work with Win 8.1. Prefer to do with GP. This is a domain environment with
multiple users per device.
Thanks
Andrew

Hi，
I tested this issue in my Windows 8.1 domain environment, enable the policy: Interactive logon: Do not display last user name, then run gpupdate /force to update the policy, it works as expected, the last logon user name is not displayed on the screen
Yolanda Zhu
TechNet Community Support

HELP! Lost User Folder After 10.4.7 Update

HELP! Lost User Folder After 10.4.7 Update!!
I did everything I normally do before an upgrade.
Fix premissons, etc etc etc..
Ran the combo updater & rebooted....
Checking my HDD & noticed I lost
my "jtmadman" folder in my User folder.
Any ideas???
Thanks
eMac 1.25 ghz Mac OS X (10.4.7)

Do you still have any of the normal user subfolders
visible in the Finder sidebar, like "Movies" or
"Pictures"?
No, I don't. I can access it with A-dock.
Is this an admin or regular account? How
many user accounts on the Mac?
Admin account, 1 user.
How about login items? If you go to System
Preferences -> Accounts -> Login Items tab, what is
on the list?
My login are:
A-dock
PrefsMenu
Palm Desktop Background
Fkey Listener
LCCDaemon
I noticed when I use thinkertool and
click Show hidden & sys files, my
"jtmadman" folder is there in my User folder.
Why is it hidden??
Thanks

Systems preferences do not respond....after most recent Security Update...

HELP.........systems preferences do not respond....after most recent Security Update...During the most recent Security update download, near the end of the process,clean turned all graining and seemed to freeze. I waited awhile and then turned the computer.
ever since then I can not open up any of my systems preferences, battery level,date and time do not show up on the top of the screen as before.....
I had since gone and successfully downloaded the most recent security update for the Apple site and after a restart still no battery level, systems preferences or date and time....
Any suggestions at this point.
BB
ibook g4 Mac OS X (10.3.9)

Hi, I think I need to update my profile because my computer definitely says it has 10.4.11
I managed to solve the stickies and TextEdit issues by removing Butler in the end.

Index style not displaying the chosen option after publishing

Hi Folks,
I have been adding new albums to one of my web pages and had chosen the Black ringbinder Index style for the albums. After a recent publishing upgrade and visiting my site I noticed that all the albums had framework boxes with ? marks all around and did not display the chosen index style.
I went back to iWeb and chose a Brown sort of "Wedding Album" style and re-published. Everything was OK so once again back to iWeb and set them all to the Black ringbinder Index style and re-publushed.
Same problem with ? marks all around each album.
Any ideas for fixing?
Thanks
Douglas

Hi there
The simplest way to specify a relative path is to avoid any browsing you may do to find whatever file you are linking to and quite simply type the file name into the dialog. Once you have done this, you simply ensure that the file is present alongside the Captivate movie so that during playback it can find the file.
I think where most folks make a mistake is when they use the dialog to browse to and choose the file they are linking to. When you do that, Captivate dutifully inserts the path leading to the file on your own hard drive. This means that the file would need to be stored the the exact location using the same drive letter on the end user's PC for things to work in the end.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Some report fields not displaying when users view reports in a Citrix

Hi All, got a weird one.
We have an app developed in MS Visual Studio 2007 that utilizes .NET crystal reports. Our users access these reports through citrix. Most of teh time, most people can view these reports correctly. SOME of the time, however, certain fields will disappear. The report still runs the same (grouping, ordering, etc) but key information is missing.
After re deploying the reports and / or clearing the user's roaming profile then everything is good for a while, so I know it has something to do with a temp or cached version of the report. is there a way to set .net crystal reports to NOT cache AKA create new every time?
Any assistance would be greatly appreciated!
JOhn.

Hi John,
Yes and Yes.... 14 years...
Multiple Commands and multiple data sources without being linked can cause problems if you also use SQL Expressions. If you try to add more than one data source in the Designer you'll get a pop up warning about server side grouping and SQLExpressions can not be used.
But I don't think this would be the cause. May be a result of the option logically internal to CR but I don't think the data source would be the issue, again you said the info is there just not displayed.
Do they have access to run your app without going through Citrix? Possibly running your app using Remote Desktop. Could rule out if it's a CR issue. I think this may be a GDIPlus problem, it is the dll that renders the page and could be dropping the objects. I know MS has been patching it lately to plug security holes....
One option, if they can, is to use [Modules |https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip], get then to run it when the reports are working and then again when they are not and see if there are any dll differences...
I have heard of a few other cases with Citrix and I believe it was narrowed down to being a Citrix problem and that was as far as we could take it....
Process Monitor may help but if it's random it's a lot of info to go through to determine the cause.
Maybe logging a case with Citrix might help also....
Thanks again
Don

OID can not display some users - java.lang.ArrayIndexOutOfBoundsException:0

We have set up AD to OID synchronization for users and groups using Import connector, and it worked fine. The users in OID can log into applications protected by OAM. But recently I found that some users that could be displayed in OID before can not be displayed now. If I click on the DN in Oracle Directory Manager, a error window pops up. It is a long error message, and the first a few lines are as follows :
0
java.lang.ArrayIndexOutOfBoundsException:0
at oracle.ldap.admin.AttrOptions.<init>(entry.jave:3151)
at Oracle.ldap.admin.Entry.getProp(entry.java:457)
I don't see any error message in the integration profile or log files. I am testing things on an account that is having this trouble, and the strange thing is that it can not log into application protected by OAM any more, but it can log into OAM console.
We use OID 10.1.2.3 on Windows, and OAM 10.1.4.0.1.
I searched in Metalink but didn't find anything helpful. Any help is appreciated. Thanks for your time.
Hailie

Pramod,
Thank you for your reply. Please see below my answers to your questions:
-> Do you see any pattern in the users (DN) that are unable to be displayed/login?
Yes I do see some pattern. There is one change on the problem user's dn - the "\" after the last name is gone.
Before: cn=smith\, john, cn=users,dc=abc,dc=com
Now: cn=smith, john, cn=users,dc=abc,dc=com
However I check in Active directory "\" is presented. In OID if I right click on cn=smith, john and try to delete it, I got a error message "LDAP: error code 34 - Error in DN Normalization". Is that caused by the missing of "\"?
-> Does ldapsearch on these users (with all attributes) show something (special chars, etc)?
ldapsearch on cn=cn=smith, john,cn=users,dc=abc,dc=com returns no objects:
$ldapsearch -L -D "cn=orcladmin" -w "*****" -h host -p 389 -b "cn=smith, john,cn=users,dc=abc,dc=com" -s sub "objectclass=*"
ldap_search: No such object
ldap_search: matched: cn=Users, dc=abc,dc=com
Ldap search on cn=smith\, john,cn=users,dc=abc,dc=com:
$ldapsearch -L -D "cn=orcladmin" -w "*****" -h host -p 389 -b "cn=smith\, john,cn=users,dc=abc,dc=com" -s sub "objectclass=*"
dn: cn="smith, john",cn=users,dc=abc,dc=com
uid: [email protected]
employeenumber: 916963
cn: smith, john
registeredaddress: 512
krbprincipalname: [email protected]
orclsamaccountname: ABC.COM$JSmith
sn: johnsmith
displayname: John
orclobjectguid: lJO0N+8H4UW/30yHukSfsw==
orclobjectsid: AQUAAAAAAAUVAAAAohxTYWIV3XFeP55cYjwAAA==
orcluserprincipalname: [email protected]
objectclass: oblixorgperson
objectclass: inetorgperson
objectclass: orcluserv2
objectclass: person
objectclass: orcladuser
objectclass: organizationalPerson
objectclass: top
obver: 10.1.4.0
-> Do you see the same behavior when you use any generic LDAP browser (Ex: Apache Directory Studio) instead of ODM?
I don't have Apache Directory Studio installed yet. I will try that later.
-> Does the changelog for the particular synch (for the affected users) show something?
Here is what I found in ActiveChgImp.aud
(weeks ago)
97426524 : Success : MODIFY : cn=smith\, john,cn=users,dc=abc,dc=com
(Recently change - The back slach after smith was gone, and "" showed up)
97469970 : Success : MODIFY : cn="smith, john",cn=users,dc=abc,dc=com
-> If login to OAM is possible, can the user modify his/her profile, and does it save the changes? If it does, can you try logging in to apps?
This user can log into OAM identity system, but when I click on "My profile" under "User manager", I got a error message "You do not have sufficient access rights".
If I log into identity system as orcladmin, I was able to modify it and save the changes. But in OID the user is still not displayed. Same error message. When I tried to add it as administrator, I could search on it, add it, but when I press "done", it didn't show up on the admin list. The users that can be displayed in OID can be added to admin list without a problem.
Thanks,
Hailie

Configured new language not displayed in user profile Language options

Hi all,
I have a requirement to add new language in portal. In that I have configured the language u201Chindiu201D in portal content translation.Now i want to configure language options in userprofile.
These are the procedures I have followed
1 .On the file server navigate to
<Installation-drive>:usrsap<SID><Instance_ID>SDM
ootoriginsap.com com.sap.security.core.adminSAP AG<version_number>com.sap.security.core.admin.630.ear
From here extract the com.sap.security.core.useradmin.war.
2.In com.sap.security.core.useradmin.war file and add u201C hi = Hindi u201C in Language_en.properties
3.Create a copy of Language_en.properties, and save as Language_hi.properties at any location.
Now we have to do some changes with the help of configtool.bat
So start the tool by executing.
<SAPJ2EEEngine_installation>j2eeconfigtoolconfigtool.bat>
Now Switch to configure mode.
In the Tree navigate to cluster_data>>persistant>>com.sap.security.core.ume.services.
Now switch between view and edit mode and choose yes.
4.By right clicking on com.security.core.ume.service create a Sub node. And choose
File-entry and upload the language_hi.properties that you have created in previous step.
5.Create and Close the Window. And just restart all cluster nodes
                        After the above configuration, the language u201Chindiu201D is added and I can able to see the language in self registration Language options.but it is not displayed in userprofile language options.
                        how to configure this Please help me.
                    These are the threads I have referred
                      How to add Hindi language in Portal
                      Regards: Add a new language (Hindi} In portal
                      How to add new language in portal
Regards
Bala

Dear Markus,
1.) import done in SMLT
2.) support package parts of the languages imported
3.) language substituted
4.) client refill done
I have done 1 & 2 and also client maintenance.
I'm not sure what are 3 & 4. Can elaborate further ?
Thanks.
Regards,
Kent

Admin Console not displaying new Users and Groups from LDAP

We created a new Realm in WebLogic, which specifies the location of the Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to find the ldap
server to use for authentication. My problem is this- the Admin Console is not
displaying the new users and groups from the LDAP server. Shouldn't the WebLogic
Admin Console display any users and groups specified in the ldap server, which
is referenced in the customized Realm?

Hi Andy,
I am not sure why you are unable to see the users and groups through the
console., you should be able to. Can you post the config.xml?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:3b700c36$[email protected]..
>
We're running WLS 6.0 Sp2 on Windows 2000 Professional.
"Satya Ghattu" <[email protected]> wrote:
Andy,
Could you please tell us what Version of Weblogic you are running?
thanks,
-satya
Andy Levy <[email protected]> wrote in message
news:[email protected]..
We created a new Realm in WebLogic, which specifies the location ofthe
Netscape
LDAP server. Our Weblogic application, called TGSLC, is able to findthe
ldap
server to use for authentication. My problem is this- the Admin
Console
is not
displaying the new users and groups from the LDAP server. Shouldn'tthe
WebLogic
Admin Console display any users and groups specified in the ldap
server,
which
is referenced in the customized Realm?

SAP Installation Server not patching client pc's after patching itself

Hi
We have setup Installation Server and used it to deploy SAP GUI successfully to client pc's. We encountered a problem in trying to update the installation server with patch level 22. After the patch SAP reported that numerous files or folders were missing on the installation source. Also the client pc GUI's would then display a message saying that a newer version of the GUI was available and would prompt for a response. "Yes" would appear to reinstall the GUI and would give an error afterwards and a "no" would do nothing, only asking to reinstall the next time round.
We tried to remove the installation server and reinstall it using a different share name. After removing the old share the client GUI's would no longer prompt but also do not update correctly. We again tried to reinstall the installation server to the old share name and although the clients do not prompt, they also do not update; plus the installation server still shows a patch 22 as being applied!
Is there any way to roll back the installation server completely (i.e. before the patch level)? If not what could I check to make sure that the installation server at least updates the client GUI's correctly?

We did some tests again to try piece together what happened. The only thing that seems to have happened is that someone had removed the installation package that the clients were using although we can't be sure if that was the problem.
We were about to reinstall on the share when we decided to try to update the patch level once more. The strange thing seems that after we patched the Installation Server to level 23 the clients were responding correctly to the IS again! Since then they have been able to update with seemingly no issues.

Safari on iPad does not display GIF image anymore after upgrade to iOS 4.3

1) Could anybody (especially those in Apple iOS or Safari teams) advise me why the Safari on my iPad cannot display some images (probably in GIF formats) on some webpages anymore, after I upgrade my iPad to iOS 4.3? These images on the webpages can be properly displayed on when my IPad runs with iOS 4.2.1. There should be no problem with these embedded image files because they can still be properly display in Safari running on my Macbook air.
2) Is there any solution to this problem?
3) Is it possible to downgrade my iPad back to iOS 4.2.1?

I am having the same issue with two different ipads (one Wifi and one Wifi-3g) running on our home network (Verizon FIOS). The website in question is www.tvwc.com and the main logo in the upper left corner, a .gif, does not display, only a "?". Other images on the site, in .jpg format, display correctly.
I was running 4.2.1 and am now just upgrading to 4.3.

Firefox 4 does not work on my G5. After prompting me to update from previous version I am now left with nothing functioning. How do I go back?

After downloading the latest update Firefox kindly told me I should upgrade to V4. So I did. I downloaded it, dropped it into my applications folder and overwrote the old version. Only to be told when attempting to start the application "Firefox does not work with this architecture".
Brilliant. So I look for an older version on the site, and there is nothing to be found. Just the insistance that I should download version 4 for my Mac. Well, "IT DOESN"T WORK GUYS!"
Now can we have a fix please quickly or a link to the older version, as I am now left without all my bookmarks or passwords and you are about to effectively isolate a section of the computing community from ever using you again.

For your toolbars that you had installed before, are they simply incompatible with the latest version of Firefox?
Please try reading [[Add-ons are disabled after updating Firefox|Add-ons are disabled after updating Firefox]], as that may help with your addons.
As for Firefox running slow, is it slow lading web pages, or is just the whole browser slow? Try reading [[Firefox is slow|Firefox is slow]] , which may have some tips (the optimize Windows part especially).

External DNS server not replicating records to secondary after migration from 2003 to 2012

Hi
I have a query relating to 2012 Server and DNS.
Last week we de-commissioned our primary external DNS server (Windows 2003 Server) and moved the role over to a new Windows 2012 server.
Since this point replication to our secondary server (3rd party hosted) does not seem to occur and our DNS records seem to have expired on the secondary server as we cannot look these up via nslookup.
I cannot see any failures in the event log of the server; I have checked our external firewall logs and nothing is being blocked inbound/ outbound as far as I can see. And the server’s local firewall has been disabled.
The server is a standalone server in a workgroup with a standard filebased primary zone, with no AD integration and recursion disabled.
When I created the zone I copied the .dns file from the old server and selected this in the interface during the creation of the zone on the new server. The new server has the same internal and external IP as the old server and the old server is off-line.
I have also manually increased the serial number of the zone and still no joy.
One thing that I have noticed is when I open the zones properties/Name Servers and click edit on the external nameserver I get the infamous "The server with this IP address is not authoritative for the required zone" error.
Any help Would be appreciated, thanks in advance

Nice to hear that you are close in finding the problem. So in short:
You have enabled Zone transfers in DNS management console for the applicable zone
You have verified that your DNS is listening to the correct interfaces
You have enabled firewall rules to accept TCP and UDP traffic to port 53
You have checked if "BIND secondaries" option is applicable to your case
You have initiated a zone transfer from the secondary server
Lefteris Karafilis
MCSE, MCTS, SEC+
LinkedIn: http://www.linkedin.com/in/lkarafilis
Mail: [email protected]
Blog: http://www.karafilis.net

Png files referenced in css not displaying in Chrome & Firefox after after PUT

I'm new to dreamweaver but I've got a techy / software background so feel free to speak geek.
I've been tasked to create a simple splash screen for an existing intrenal website for my company.
I've been able to put page together in DW and sucessfully preview in Chrome, Firefox, & IE. After I PUT files on the webserver (under an existing virtual directory in IIS) I'm bumping into a problem where I'm not able to see a the three png files I've got embedded into the .css sytle sheet fro the header, container, and footer sections. Here's a look at the html & css for the page. Any recommendations on how I could code this better or fix the problem? Your help will be very much appreciated.
The site was originally built off a template so the comments in the .css are from the original author of the template.
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<link href="/CognosSplashScreen/oneColFixCtrHdr.css" rel="stylesheet" type="text/css" />
<style type="text/css">
body {
          background-color: #000;
          background-image: url(/CognosSplashScreen/bg.jpg);
          background-repeat: no-repeat;
</style>
</head>
<body>
<div class="container">
<div class="header">IBM Cognos - Enterprise Business Portal (EBP)</div>
<div class="content">
    <h1><img src="/CognosSplashScreen/Wrench Sprocket.png" width="215" height="164" align="left" />EBP is offline</h1>
    <p>The IBM Cognos EBP has been taken offline for scheduled maintenance. Services will be restored on Wednesday, May the 2nd at 7:00 AM.    </p>
    <h3>Maintenance Details</h3>
    <p>We're currently in the process of upgrading from IBM Cognos BI version 8.3 to the most current 10.1.1. To take a look at some of the new features you'll experinece we've put together a brief overview you can download by <a href="#">clicking here</a>.</p>
    <p>10.1.1 training is available to for all users. Take a look at the list of available courses get yourself, your team, or department enrolled in a class today.    </p>
</div>
<div class="footer">
    <p> </p>
    </div>
</div>
</body>
</html>
Here's the .css
@charset "utf-8";
body {
          font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
          background: #42413C;
          margin: 0;
          padding: 0;
          color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
          padding: 0;
          margin: 0;
h1, h2, h3, h4, h5, h6, p {
          margin-top: 0;           /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
          padding-right: 45px;
          padding-left: 45px; /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
          border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
          color: #42413C;
          text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
          color: #6E6C64;
          text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
          text-decoration: none;
/* ~~ this fixed width container surrounds the other divs ~~ */
.container {
          width: 980px;
          margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
          background-image: url(/CognosSplashScreen/PageBodyLight_02.png);
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
          background-image: url(/CognosSplashScreen/HeaderBubbles_02.png);
          padding-top: 57px;
          color: #CCC;
          font-weight: bold;
          padding-left: 97px;
          padding-bottom: 30px;
/* ~~ This is the layout information. ~~
1) Padding is only placed on the top and/or bottom of the div. The elements within this div have padding on their sides. This saves you from any "box model math". Keep in mind, if you add any side padding or border to the div itself, it will be added to the width you define to create the *total* width. You may also choose to remove the padding on the element in the div and place a second div within it with no width and the padding necessary for your design.
.content {
          padding: 10px 0;
/* ~~ The footer ~~ */
.footer {
          background-image: url(/CognosSplashScreen/footer_02.png);
          padding-top: 5px;
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
          float: right;
          margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
          float: left;
          margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
          clear:both;
          height:0;
          font-size: 1px;
          line-height: 0px;

CSS for images coded on the Web page itself is pathed relative to that Web page. CSS for images used by the external CSS file is pathed relative to the CSS file location.
If this is the link to the css file from the Web page... go to "CognosSplashScreen" subfolder and get the "oneColFixCtrHdr.css"
<link href="/CognosSplashScreen/oneColFixCtrHdr.css" rel="stylesheet" type="text/css" />
.... and you don't need the leading "/" by the way.
then relative to that css file, which is already in the "CognosSplashScreen" subfolder, the path to the "HeaderBubbles_02.png" is just
background-image: url(HeaderBubbles_02.png);
not:
background-image: url(/CognosSplashScreen/HeaderBubbles_02.png);
and so forth for other image paths.
Best wishes,
Adninjastrator

Blog server not displaying OD user blogs after restart after 10.5.7 update

Similar Messages

Maybe you are looking for