Blog summary does not seem to update online
I've just updated a blog I've created for a musician friend of mine; it's been done on iweb 3.0.2 & published via ftp using godaddy: http://lauramoodymusic.com/lmm/news/news.html
However, the main blog summary which is correct on iweb, and the version published to a local folder, is not updating online. The new blogs are visible if you go to the archive, and by clicking on the RSS feed, but not from this front page... I've tried to republish all the relevant pages again, manually, but this doesn't seem to have worked either.
Help urgently needed.
thank you.
+Noticing how disorganised the iTunes Lib is, I spent a lot of time today adding and editing mp3 tag data so that iTunes would look more logical.+
+However it does not seem to pull in or update to what I have on my hard drive!+
iTunes does not read the tags until you select/play a track. It stores the tag information in its library file and this will not reflect changes made to tags with an external editor until iTunes looks at the track.
You can force iTunes to re-read all the tags by selecting all the tracks in your library, right clicking in the selection and choosing get info.
It is essential that you do nothing except click "OK" as any change you make would be applied to every track in your library.
Depending on the size of your library iTunes may take a while to complete the task.
It is always advisable to have your library backed up in case you make a mistake.
Similar Messages
-
Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim
Download it directly from Apple and apply;
Digital Camera RAW Compatibility 6.02 -
When i click on general settings, the software update does not seem to come up? It wont let me download any apps.
I Want to download i0s 5
i have ipod touch 3rd genYou need to connect your iPod to iTunes on a computer and update from there.
Before updating, I recommend that you create a backup first, using : http://support.apple.com/kb/ht1766
Please note that iPod 3d generation only goes up to iOS 5.1.1
To update the iPod, use: http://support.apple.com/kb/ht4623
scroll down to the part that's about updating with iTunes.
Good luck
Stijn
Message was edited by: jesterwylde -
HT4890 Photo Stream does not seem to be updating on my PC. What should I do?
Photo Stream does not seem to be updating on my PC. What should I do?
Try signing out and back in to the iCloud control panel.
-
MSI transform file does not seem to be preventing updates
So I have noticed that in the last few versions, the MSI transform file (MST) that i have been using does not seem to be working in terms of stopping the update nag on the users machines.
My transform file has the following entries:
4. under property, change the ISCHECKFORPRODUCTUPDATES to 0 and the AgreeToLicense to Yes
5. Under Checkbox, also change ISCHECKFORPRODUCTUPDATES to 0
Has there been a new key added or something? Becuase my users are still getting prompted, even with these changes.I think it was previous versions of flash which had been installed outside of the gpo that was causing it. The problem has dissapeared somewhat, or well I havent noticed it on the last few flash updates. I would make sure that the version of flash on the machine is the one installed via GPO. It could be that the user or an administrator had installed a non GPO/MST version of it, which was I think the case with us.
I attached both my transforms for acrivex and plugin for version 11.5.502.110, but it should be similar. I have not noticed the popup in a while so i think i got rid of the problematic flash copies on the machines due to reimaging or uninstalling old flash on a case by case basis. sorry to say!
Oh i cant upload files, oh well. its just 3 properties:
But if anyone else has the problem and knows a solution, feel free to update! there could be another property in there somewhere, however like i said I have not seen the behaviour reoccur, especially on newly imaged machines. -
Help: Just finished shooting a wedding and Aperture crashes constantly during editing. All pic's in RAW and even after making sure I have the latest Aperture update, I have had to rebuild my library twice and "repair" does not seem to fix the issue. Help?
Well!
If you have ThunderBolt, I would go with such for an External Working Drive, spinning platter or SSD depending on your budget
This does not have to be huge just big enough to house your most current Jobs
Once the Current Job is put to rest I would move it to a larger multi bay hard drive unit, USB or FireWire nothing fancy, no RAID, set up as one single Disk
This would only be accessed when something is needed from a past Job so the connection does not have to be speedy
The Drobo would be relegated to Vaults and backups
You can set up a Vault on the Drobo to back up the External Working Library and then Reconnect it when you have moved the Library over to the other Enclosure
This has worked for me pretty smoothly for a long while, but I have found over the years that one can not assume all people work in the same manner! :-) -
How do i get the cloud to update my calendar, it does not seem to sync
how do i get the cloud to update my calendar, it does not seem to sync?
Make sure you are adding events to the iCloud calendar as that is the only one that syncs with iCloud. Check your default calendar by going to Settings>Mail,Contacts,Calendars>Default Calendar. Be sure you have selected the calendar listed under your iCloud account name as your default.
If you're settings are correct and it still won't sync, try going to Settings>iCloud and turning Calendars to Off, then back On. If the calendar in iCloud has all your events, when you are prompted about what to do with the iCloud calendar when you turn it off, choose Delete from My iPhone. It will be synced back to your phone when you turn Calendars back to On. -
After installing "Maverick" update my Epson V300 scanner software does not work anymore. Epson does not seem to have a compatible driver (yet?).
It's not just scanners, my WACOM graphic tablet no longer works, am told by WACOM support that Maverick will not recognise it as it is too old!!! Worked perfectly with X 10.8 but not any longer - am well cheesed off as its going to cost me a few bob for a new WACOM!!! Thanks Apple
-
My photo stream does not seem to be working as before with the new PHOTOS update. Some of my devices are not getting the uploads/downloads, anyone have this problem?
Recommend that you post your question in "Photos".
Remember, Photos is not a replacement for Aperture. -
Hi. I just wanted to update my 3 apps PS, Brigde and Indesign. After doing that I wasn't abble to open Brigde??? PS and Indesign works fine. Further more the Application Manager does not seem to register the updates I have made on Indesign and PS. Everytime I open the computer MacIBook 4.1, OS 10.6.7) it looks like I haven't updated software? Please help! Kurt
Moving this discussion to the Bridge General Discussion forum.
Kurt Rodahl Hoppe I would recommend reviewing Updates repeatedly applied | CC which discusses how to apply the updates successfully. -
I attempted to update the software of my dated iphone 3G last evening. My phone was constatantly connected with iTunes during the process. The iOS version 4.2 downloaded and installed successfully on my phone...only to state at the end that "Your SIM does not seem to be supported. Please insert a supported SIM....". It gives me no option on the phone other than making an Emergency call. I can't even restart or reboot the phone, or access springboard, etc. The black screen displays a USB cable plugged in to the iTunes logo. Incidentlly, I have been using this SIM for many months on this phone. I also tried inserting other functional SIMs. None of this works. Can someone help please!! Thanks,
Maybe it was hacked before and now through the update it's locked back to the original carrier.
-
i updated it.. and now when i go on to itunes its saying 'The Sim Card Inserted in this phone does not seem to be supported' Helppp please
Some indian store :/
We get posts here, almost daily, from folks from India, who purchase locked iPhones in the US, only to find out they can't use them in India. I've always wondered what happens to those phones... -
I am now using v3.6.8 and tried updating to v7.01 but it does not seem to work. Went to control panel to remove all the old versions but Firefox was not listed there although Thunderbird is there. Please advise asap, thanks
I recommend backing up your Firefox settings in case something goes wrong during the uninstall/reinstall process. See [https://support.mozilla.com/en-US/kb/Backing+up+your+information Backing up your information]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
In the Control Panel, Add/Remove programs, look for '''Mozilla Firefox'''. Make sure to save (do not delete) your personal settings when uninstalling.
If it isn't there, just try installing 3.6.23, which is the latest in the 3.6 family. You can download 3.6.23 here: http://www.mozilla.com/firefox/all-older
With respect to version 7.0.1, are you saying that the installation failed, or it seemed to work but it's nowhere to be found? -
My iPhoto library has suddenly disappeared from my computer.
When i click on iPhoto it tells me to choose my library or create a new one. However no library option appears. I have searched the computer for the library but it does not seem to exist anymore. I did not have time machine set up, so there is no back up. Is there any way i can retrieve my library?
Here is a picture of what appears when i click on iPhoto:In terms of searching i have searched for photos on my finder. However, none of the photos that appear are from my iPhoto Library.
Search with FindAnyFile. You can download it here: http://apps.tempel.org/FindAnyFile/index.php
Search for any file with "ThumbJPGSegment" in the name. If you added at least one image to your library, the library should contain a file with this name, see OldToad's post: Re: Since I updated to iPhoto 9.5.1, my library is not listed or available. How can I find it? Can I use the time machine to restore it? -
With Windows 7 I upgraded itunes to 11. Now in my itunes library, when I click on a song "original file could not be found" comes up. This happens with over 2000 songs, but it seems to be ones I recorded from cd's. Locate does not seem to work. Has anyone else had this problem?
Highlight a song that is supposedly missing, press CTRL+I to Get Info, say no when asked to locate the file, then look at the summary tab. Where does iTunes "think" the file should be? Where is it really? You may need to give a configuration file a minor tweak.
tt2
Maybe you are looking for
-
Problem with xml table, please help
hello everyone, can you help me please , i need to read an xml file from the sap directory into an L_XML_TABLE declared as follow : TYPES: BEGIN OF t_xml_line, data(256) TYPE x, END OF t_xml_line. TYPE-POOLS: ixml. DATA: l_ixml TYPE REF TO
-
Paragraph stops word-wrapping in Firefox
I am having the toughest time with an iWeb '08 website and text formatting. In Safari, and IE, the page looks great. In Firefox 2.0.0.12 on both OSX and Windows XP, the paragraph text stops wrapping down the page. http://www.cleanupthemud.org/cutm/10
-
Subcontracting - outbound delivery by ME2O for Multiple batch of 1MTR
**Dear Expert** **Subcontracting -we want to send One material to Vendor for processing but this material having Multiple batches,In T-code ME2O we can enter only one Batch while creating delivery.** **If we want to create Delivery for multiple bat
-
Search help for Standard SAP field
Hi, I need to add a search help to Group key (KONZS) field in XK01 transaction. How can i add our own search help to a field in standard transaction?? This is some what urgent, please give me the solution . Thanks in Adavance, Moghani.
-
WHAT ARE EVENTS IN A CLASSICAL REPORT ?
WHAT ARE EVENTS IN A CLASSICAL REPORT ? PLEASE EXPLAIN THEM ? BEST REGARDS RYAN