Bloggie MHS-TS10 /TS20 EXPORTING to bloggie help me
ok so i just bought bloggie mhs-ts10 i have no trouble exporting videos to my bloggie i have imported from my bloggie.. but when i try to convert other vids i have that were not associated with the blogie i get an error... the non associated videos were converted to 1080P H.264 format i get an error i simply want to put a movie or other videos on my new bloggie i need to know what i need to do to get more use of my bloggie simply as a video player
also is there any chance sony can make an adapter for headphones through the mini hdmi port i think its verry possiable and would make the unit even more user friendly [just a thought]
Hello,
Welcome to the User Discussion Forums.
If you would like to use Bloggie Software with photos and videos previously taken and stored on your computer, click on the "Import" button located in the lower left hand corner and navigate within the Windows dialog to where your photos and videos are located.
Bloggie Software currently only supports JPG image and MP4 video formats for import.
As for headphones via HDMI, thank you for your suggestion, we will forward your comments for review.
Similar Messages
-
Hi,
I just bought a Bloggie MHS-FS3 and I just had a terrible experience with the online support, one hour of question and nothing, please forgive e if I'm not in my best mood right now.
My Bloggie is connected wth my computer ad my computer is connected with a 3D TV. The camera comes with a sample of a guy in bike, I was able to transfer it to PC with Sony software and that sample works perfectly with my active glasses and my 3D TV (Samsung). Like all good 3D contend that I saw, that sample has "twin" images until you activate the 3D in the TV to merge the images.
The problem is that the movies that I shoot in 3D are not in that "twin" or double format. I can see them in 3D in the LCD camera, but they are not in 3D when transferred via Sony software.
I really need some help here, I think that this matter is not that difficult to understand, but it tooks one hour for a Sony professional to say me nothing.
I already did firmware ugrade (to 1.09 first thing I did) ad I don't have any problems with other 3D contents in my TV stremed from my computer.
Thanks, I'd appreciate your help.Hello 3D fan
Welcome to the User Discussion forums.
If your subject is moving, or is too close or too far away, then the desired 3D effect may not be produced. Any of these scenarios can cause focusing issues that interfere with the 3D effect and prevent the video from appearing to be in 3D. Also The 3D effect is not as dramatic for subjects near the edge of the frame. Therefore, it is recommended your subject be positioned in the center of the frame when recording 3D video.
Try shooting 3D video at varying distances to determine what works best for you in your shooting situation.
Also here are some Tips for capturing 3D movies.
1. Hold the camera in a horizontal position.
2. Position the subject and background within the frame of the LCD screen.
3. Pan the camera left or right slowly, while confirming the 3D effect displayed on the LCD screen.
Notes:
The Zoom and SteadyShot functions are not available while recording 3D images.
3D shooting is only available for 1920×1080 size images.
3D shooting is not possible with the 360 Video Lens (MHS-FS3K only) -
Just received a MHS-TS10 for Christmas. Is it possible to print photos from the Bloggie software? I can't seem to find a way to print my photos. I tried to drag my photos into my photos file on the desktop to print, with no luck. Am I missing something obvious, as it seems you should be able to print your photos?
here are some Great tutorials for the MHS-TS10 from our partners in Sony-Europe. The included Bloggie software. Will allow you to import your videos and Photos.
The following "how to" Tutorials include screen shots.
http://support.sony-europe.com/tutorial ... m=MHS-TS10 -
when installing Bloggie software, get always message that "Bloggie software has error". Using XP. Help!
Try checking your security software - test the install while it is switched off and if all goes well create an exception for the software.
-
hi sir am using FCP 7 on Mac Pro. I Want export more than 2 hrs file like 2.30 min Movie. But my My FCP is allow only 2 hr video to export can u help me how can i do.
Try FCP Studio forum, this is FCPX forum.
-
I am trying to export my project to an avi file, but its only exporting the audio, help?
I am trying to export my project to an avi file, but its only exporting the audio, help? I can open the avi file but there is not video. I am choosing uncompressed avi, 1080x720 frame rate 29.97, what can i do?
The above was a quote and AME is not necessary. From the Timeline selected Ctrl-M brings up the Export window. There select "AVI" and under Video Codec below select "None"
-
i recorded 1 hour and 6 minutes of footage on my Kodak Zi8 Camera in WVGA mode. When I connect it to my Macbook Pro, the .MOV file that it creates is only 59 mintues. I can still view the full footage on the camera itself. I just can't export it. HELP!!!!
So it is cutting off the end at 59 minutes? How large is the file that is being exported? You may be running up against a file size limitation.
-
Recently purchased this Bloggie from Costco. I have taken both video and still with this camera and have installed the software on my computer. I connected the Bloggie to my computer via the USB flip and expected it to upload my video and stills. After leaving it connected for 2 days, the Bloggie still hasn't uploaded most of my video or stills. I don't have much video or stills so I can't imagine it would take so long to upload. I don't get any error messages, just a box saying "importing". Any ideas?
Thanks,
8 2 4Hello 8 2 4,
Apologies you are experiencing difficulties transferring your pictures and videos.
Here are some Great tutorials for the MHS-TS20 from our partners in Sony-Europe. The included Bloggie software, Will allow you to import your videos, the following "how to" Tutorials include screenshots.
http://support.sony-europe.com/tutorial ... m=MHS-TS20 -
SONY Bloggie MHS-TS20 install issue
I bought a SONY Bloggie Touch MHS-TS20 and am trying to launch the software. I get so far as installing it and says 'starting', but then i get directed to a google chrome page that says:
" oops! google chrome could not connect to localhost:2468" then nothing. I've tried un-installing it and re-installing but I get the same error message everytime. I'm using an HP with Vista.Hello All,
Out of curiosity - Have you tried to disable the Firewall software prior to installing the software? I know when I did the install (I don't use google chrome) but Windows Firewall did require that I "Allow" the bloggie software access to the internet.
Try disabling your Firewall software be it Symantec, Norton, McAfee or Windows - Then install the software and see if you have the problem.
In Peace and Agape,
Trav.... -
Problem with SD card and Sony Bloggie MHS-CM5
I have just bought a Sony Bloggie model MHS-CM5 and a SanDisk SDHC (number 4) 4gb card. For some reason when I turn it on, it was saying "error formatting sd card" or something very similar. I did some research and saw a problem somewhat similar, tried connecting to my computer, taking the battery out and back in, formatting card from camera options, and now it is saying there is no space on the memory card when it is brand new. I am fairly good with these things and I am stumped. Any help is greatly appreciated!
A SDHC type 4 4GB card should work fine with your bloggie, so try the card in another device and try another card in your bloggie to establish which is having the issue. If you find that the bloggie is having issues with several different cards it may need service. Give Sony support a call and they will be happy to help:
http://esupport.sony.com/US/perl/suppor ... mdl=MHSCM5 -
I get poor picture quality and no 3D pictures when shooting in 3D mode. Any tips or suggestions?
Solved!
Go to Solution.Hello,
Welcome to the User Discussion Forums
For the main tips when Shooting 3D;
Hold the camera in a horizontal position.
Position the subject and background within the frame of the LCD screen.
NOTE: For best results, it is recommended to position a scene that has both close and far away objects.
Pan the camera left or right slowly, while confirming the 3D effect displayed on the LCD screen.
NOTE: The Zoom and SteadyShot functions are not available while recording 3D images.
and finally, have fun! and don't get too close to your subject (about 4 feet is optimal).
Here are some good 3D tips from Sony-Europe
http://www.sony.co.uk/support/en/topics ... 3d/bloggie
Or this one from from Sony Asia.
http://www.sony-asia.com/support/faq/452528
Hopefully these tips and guides help you enjoy your Bloggie to its fullest! be sure to report back and share any new tips or techniques with the community. -
Sony Bloggie MHS-CM5 need to completely disable SteadyShot
Has anyone discovered a hack to completely disable SteadyShot, the motor? Even when shooting 720p at 60fps where the SteadyShot is suppose to be inactive I find it still on. Unfathomably, using the camera on a tripod actually gives me a shakey picture (not to metion a loud adiable grind sound everytime the SteadyShot kicks in), which makes the camera footage worthless. At this point I am finding it hard to believe this camera ever made it to retail as the SteadyShot completely ruins the picture and adds the kinda noise to the audio one woudl associate with old film cameras. It's really, really bad. If anyone knows how I can kill the SteadyShot completely I'd appreciate it.
Solved!
Go to Solution.Hi Eliah,
Welcome to Sony Community!
There is an option to turn OFF Steadyshot option under “Shooting menu” of the Camera. The camera shake reduction function works only in [640 × 480 30P] or [1280 × 720 30P] mode.
Information about this option is mentioned on page # 40 of the Handbook:
http://www.docs.sony.com/release/MHSCM5_handbook.pdf
Please mark the solution as accepted if you find the information useful.
Thank you for your post. -
Quality, Export, and Compression help (pic included)
I'm working on an edit of my RTW trip and am struggling to figure out some quality issues. Video was captured by 3 cameras (a JVC everio, a GoPro Hero 2, and a Droid 4). All record in HD (720 or 1080). I figured I would use the lowest common denominator and converted all the video in MPEG streamclip to be 1280x720 HD, using Apple Intermediate Codec and 100% quality. I have the whole timeline basically finished in FCE, but I'm trying to refine it now and I'm really bothered by the quality. It doesn't look HD at all...it looks really pixelated. Below is a screenshot of my viewer, which is at 100%. Note the edges where the blue arrows point-they're all jagged.
It looks decent at 100% but that is not even 1/6th of my screen. If I go up to 200% it looks like crap. Is this just because I'm editing on a 26" iMac and my screen is so big that I need 1080p or 4K to look good at full screen? When I cropped the 100% screenshot in Preview I noticed that it is 640x360 pixels...exactly half of 1280x720 like I would expect. Why is that? How do I get the quality to be like it should? Am I losing it in MPEG Streamclip or Final Cut? I haven't even started the export battle, which always infuriates me with how bad the quality comes out if the video is a reasonable file size (This video is 5m40s, I feel like 100MB or less is reasonable for streaming right?)
Thanks a ton for the help. I really want to finish this edit this week but want to make sure I do my trip of a lifetime justice.1.) Any advice for resizing the 1080 clips?
Go to the first clip in your timeline that is 1080 and looks incorrectly sized. Double click on that clip in the timeline, you will see the clip open in the Viewer. Once it does that, in the Viewer, click on the Motion tab, and then adjust the Scale paddle until the frame is just filled. Once that is done, type Command + C to copy the clip and the settings adjustment you made.
Now go to the next instance of a 1080 clip in your timeline and click on it to select it. If there a bunch together you can hold down the shift key while you click on the clips and select as many as you want at a time. Once you have made the selection, type Option + V to paste the attributes from the clip you had just copied. The Paste Attributes window should open, and you want to check the Basic Motion box and keep everything else unchecked. Then click OK, and the clips you had selected should now all be resized.
2.) Some of the clips still have blurry frames. Now that I have the sequence totally edited and don't need to trim/move clips all the time, if I use the raw source video (not optimized for Final Cut via MPEG streamclip and the Apple Intermediate Codec) in Final Cut, will the quality be better or will it be the same/not work at all?
Final Cut Express will only work with HD material in Apple Intermediate codec. You were smart to convert the footage prior to editing. Are the clips that look blurry the 1080 clips? At any rate, you may need to render your timeline, see if any colored render bars are showing on the timeline (rendering will occur automatically when you export your finished movie).
MtD -
Applescript and InDesign: Packaging/exporting -- can you help?
I found and tweaked a droplet script that isn't quite working right. I tried and failed to learn to do this myself. Any help is greatly appreciated! This is for InDesign CS6 -- you don't really need to know InDesign in order to help (at least I don't think so).
For the moment, I simply drag multiple InDesign files (for this example, "filename1.indd" and "filename2.indd") onto the droplet. InDesign packages them separately and outputs PDFs into each output folder. The problem is that it's creating too many folders and not putting things where I want.
Another thing: when InDesign packages a file, it creates a "Instructions.txt" file for each package that I need deleted. I'd really like this added to the script as well. Is it possible?
Current output (messy!)
Desired output (perfect!)
"exports" folder
"filename1" folder
filename1.pdf
"filename1" folder
filename1.indd
Instructions.txt
"filename2" folder
filename2.pdf
"filename2" folder
filename2.indd
Instructions.txt
baseFolder <--- directory of original files
"filename1" folder
filename1.indd
"PDF" folder
filename1.pdf
"filename2" folder
filename2.indd
"PDF" folder
filename2.pdf
Here's the script I have so far:
property baseFolder : (path to desktop as text) & "exports:"
on open mgItems
repeat with mgThisItem in mgItems
tell application id "com.adobe.InDesign"
try
open mgThisItem
set mgDocName to name of active document
set text item delimiters of AppleScript to ".indd"
set mgShortName to text item 1 of mgDocName
set targetFolderPath to my createFolder(mgShortName)
set text item delimiters of AppleScript to ""
set mgPackageFilePath to targetFolderPath & mgShortName as string
set mgProofFilePath to mgPackageFilePath & ".pdf" as string
set properties of PDF export preferences to properties of PDF export preset "[Smallest File Size]"
tell the active document to export format PDF type to mgProofFilePath without showing options
tell the active document to package to mgPackageFilePath with copying fonts, ignore preflight errors, copying profiles, updating graphics, including hidden layers,copying linked graphics and creating report
close active document saving no
on error e
display dialog e
end try
end tell
end repeat
display dialog "PDFs created and InDesign file packaged"
end open
on createFolder(nameString)
set macFolderPath to baseFolder & nameString
do shell script "mkdir -p " & quoted form of POSIX path of macFolderPath
return macFolderPath & ":"
end createFolder
Thanks very much!Easy enough. Note that I've moved things around a little to make a nicer flow:
on open mgItems
--make a date slug
set shortDateString to short date string of (current date)
set {oldTID, my text item delimiters} to {my text item delimiters, "/"}
set dateBits to (text items of shortDateString)
set my text item delimiters to ""
set datePrefixString to (text item 3 of dateBits & text items 1 thru 2 of dateBits & "_Release") as text
set my text item delimiters to oldTID
repeat with mgThisItem in mgItems
tell application "System Events"
--get path of the container of the passed in object
set targetFolderPath to path of container of disk item (mgThisItem as text)
end tell
tell application id "com.adobe.InDesign"
try
open mgThisItem
set mgDocName to name of active document
set text item delimiters of AppleScript to ".indd"
set mgShortName to text item 1 of mgDocName
-- set up folder and file references
set mgPackageFilePath to targetFolderPath & datePrefixString & ":" & mgShortName & ":"
set mgProofFilePath to mgPackageFilePath & "PDF:" & mgShortName & ".pdf" as string
set text item delimiters of AppleScript to ""
-- create dat folder, main folder and internal PDF folder; passing in POSIX path, though most everything ele uses HFS paths
my createFolders(POSIX path of file (mgPackageFilePath & "PDF:"))
set properties of PDF export preferences to properties of PDF export preset "[Smallest File Size]"
tell the active document to export format PDF type to mgProofFilePath without showing options
tell the active document to package to mgPackageFilePath with copying fonts, ignore preflight errors, copying profiles, updating graphics, including hidden layers, copying linked graphics and creating report
close active document saving no
on error e
display dialog e
end try
end tell
-- delete the instructions file
tell application "System Events"
delete file (mgPackageFilePath & "instructions.txt")
end tell
end repeat
display dialog "PDFs created and InDesign file packaged"
end open
on createFolders(pathString)
do shell script "mkdir -p " & quoted form of pathString
end createFolders -
I want to save my Bookmarks, but unable to find either Import or Export options, Kindly help
In Earlier version Firefox use to have Import & Export options under File menu, but in the new version 7.0.1, I cannot find Import & Export options, as I was trying to save my Bookmarks. Kindly help.
Thanks & Regards,
Subodh.Hi Subodh. I have encountered the exact same problem. It seems that the Import & Export options under the File menu are now removed starting from version 7. This leaves another exact (yet longer) way to do this.
Here's the article that explains everything: https://support.mozilla.com/en-US/kb/Importing%20bookmarks%20and%20other%20data%20from%20other%20browsers?s=import+bookmarks&r=0&as=s
Maybe you are looking for
-
Hi. If a stay more than 1 or 2 minutes on a report, then if I press any botton BIP is going to re-signin. Where can I set the timeout parameter? Thank you, R.
-
How can I coax my Mac to produce a DVD that shows on a DVD player through my flat screen?
How can I coax iPhoto, iTunes or the Desktop (right click | Burn) into producing a DVD of a slideshow from IPhoto, saved to iTunes and to the Desktop as a movie (*.m4v) -- that will show on my Sony flat screen connected to my Blu-Ray DVD player? Ever
-
Hi, In FI doc generated by F110, the field: Header text is filled by payment run+identification automaticlly, Is this SAP hard coded or can be configured somewhere? Thanks
-
Time Machine hung: a solution!
I've just found a solution to a persistent Time Machine problem: at first doing incredibly large and time consuming backups (e.g. 16.8 Gb – twice in a row) each time even when there has been no activity, then taking forever Indexing Backup, then gett
-
My function /automation tool/ in adobe photoshop 10 (new) does not work. how to fix the problem
please help me fix it ....