Blogging and interactivity??? Is it possible?

I have made a blog and I am wondering if it would be possible for my readers to be interactive to it?
The thing I mean by this is that it would be fun if they had the oportunity to also write into the blog. to comment it. is this possible?

See
http://web.mac.com/cbrantly/iWeb/Chad/Blog/8952037B-38C8-4241-BB1B-2968605FBEDD. html

Similar Messages

Is it possible to connect an iPad to a SmartBoard and interact with the iPad on the SmartBoard, like you do on a computer with the Smart-software Notebook on it?

Is it possible to connect an iPad to a SmartBoard and interact with the iPad on the SmartBoard, like you do on a computer with the Smart-software Notebook on it?

You can purchase an adapter from apple that uses the monitor cable from the projector, its the same one that is probably connecting either your laptop or school workstation. On the projector control you might need to refresh the source.

Display and interact with a vi front panel on remote C++ app

Hello:
I am new to LV and need a little advice. I need to display a LabVIEW VI front panel in my C++ .Net application that users can interact with to view real-time spectrum data. The C++ app (client) must reside on a separate computer(s) from the VI so that the client can connect from anywhere around the world and interact with the VI.
I am not sure about the basic architecture that should accompany a good solution. We want to use TCP/IP but not DataSocket. I do not have access to Measurement Studio but I do have access to LabVIEW Professional Development System v 8.2. Can anyone provide suggestions on what I need to do in order to
1. Connect to my TCP server using my C++ client app - I have already written TCP client and server code which communicate but now I need to integrate LV
2. Get access to the VI sitting on that server
3. Send the VI front panel to the client for display
4. Allow the user to modify parameters on the front panel displayed on the C++ client, send those changes back to the server, and refresh the front panel displayed in the C++ client given the new parameters (I would like a real-time display of the spectrum to always be available)
Is this possible? Has anyone done this using C++ .NET in VS2005? Are there examples I can mimic or references that will help direct me? I have searched and searched through NI's help and found a lot of good stuff but I'm still feeling confused about the best way to utilize LV.
Thank you in advance!

One more question ... what if I could use Measurement Studio? The documentation seems to indicate that it's easy to create network applications and therefore it would be easy for me to re-create our VI's front panel using Measurement Studio components in my C++ app and then simply connect those components to the networked hardware (TCP/IP or DataSocket) that could be located anywhere in the world.
Depending on what components you are using in your LabVIEW panel, it is probably pretty easy to build a Measurment Studio application to look like a LV panel.
Given that, you could use network shared variables to move data across the network, no TCP programming necessary -- I think that this is pretty easy to do, but I don't know the specifics about variable programming in that environment. Also, you will probably need to add some smarts to the server side to make sure that it is reading to and writing from variables in an appropriate manner.
Question: why can't you just use LabVIEW for the client application also?

Difference between Drilldown report and Interactive report

There is no difference between drill down and interactive report, they are the same.
With drilldown reporting, SAP provides you with an interactive information system to let you evaluate the data collected in your application. This information system is capable of analyzing all the data according to any of the characteristics that describe the data. You can also use any key figures you wish to categorize your data. You can display a number of objects for a given key figure, or a number of key figures for a given object. In addition, the system lets you carry out any number of variance analyses (such as plan/actual comparisons, fiscal year comparisons, comparisons of different objects, and so on).
You can produce both simple, data-directed lists (basic reports) and complex, formatted lists in drilldown reporting (form reports).
Drilldown report provides you with comfortable functions for navigating through your data. For example, you can jump to the next level of detail or the next report object on the same level, hide individual levels and switch between the detail and drilldown lists. It also provides a number of additional functions which let you process lists interactively (sorting, conditions, ranking lists, and so on). SAP Graphics, SAPmail and the Excel List Viewer are also integrated into drilldown reporting.
The drilldown functions are divided into three groups which differ in the number of functions available. That way each user can choose the functional level most suited for his requirements.
In addition to the online functions for displaying reports, drilldown reporting also provides functions which let you print reports. A number of formatting functions are available to let you determine the look of your printed reports (page breaks, headers and footers, underscores, and so on).
The menus and the functions available directly on the drilldown report make it easy to use the information system.
What is an Interactive Report?
An interactive report generally works in the following fashion:
1. Basic list is displayed.
2. User double clicks on any valid line
    or
    User selects a line and presses as button on the tool bar.
3. The corresponding event is triggered
4. Then in the code, the line on which action was done, is read.
5. Depending on the values in that selected line, a secondary list is displayed.
6. Steps from 2-5 are repeated till the end.
From the above explanation, I believe, its clear that, the 20th list, will essentially depend on the "selected line" of 19th list. According to your question, you want to move to 20th list directly, without "a prior list". May I know the exact requirement so that, an appropriate solution can be suggested?
Again, your question was, how to move to 20th list directly on pressing of execute button. Its not possible to move to 20th list. You must cross over a basic list, before you can go to a different list level, using the code given by Pavan.
What are Drilldown reports?
The lines of basic list of a drilldown report when clicked, will take the user to the corresponding (standard) object's display.
For eg: Suppose your report's primary component is purchase requisition, (assume you are printing PR details), and the basic list displays details of many PRs.
Eg: when clicked on a particular line of the PR basic list, it takes you to std t-code me53 (display of purchase requisition). This is the 'Drill-down' functionality.
For this, in the at-line selection of your program, as per the above ex: you'll set the parameter ID of PR number BAN (that you can get from Data element) in memory (using set parameter id) and then calling the corresponding transaction (usually skipping initial screen of the std t-code).
Likewise, if it's Material Number (Matnr), you'll be displaying MM03 transaction w.r.t. the line's matnr.
AKSHAT..........

Good, information. But I think you should post these items in Wiki, in place of forum, as here we have Qns & Ans; problems and solutions.
https://www.sdn.sap.com/irj/sdn/wiki
[ABAP Development > ABAP General ]
Wiki is the right place for such knowledge base
Thanks!!
Regards,
Vishal.

Content Viewer and interactive charts

Hello
I have created an interactive chart using HTML5 and Javascript and imported in InDesign using the Overay--> Webcontent.
The animation and the interaction is working well on the iPad2, but when I click on the screen to interact with the chart the menu of the Content Viewer is appearing and disappearing. I find this very disturbing.
Do you know how it is possible to avoid this? It would be nice if the menu would only appear when I click somewhere on the page but not on the interactive chart/web overlay.
Unfortunately on Android (Galaxy 10') the animation and interaction are visible but very very slow....
Thanks!!

Try trashing the prefs. See Replace Your Preferences

WHAT IS THE DIFF B/N DRILLDOWN REPORT AND INTERACTIVE REPORT

HI
EXPERTS CAN U HELP ME FOR THIS
THANKU

Hi....
There is no difference between drill down and interactive report, they are the same.
With drilldown reporting, SAP provides you with an interactive information system to let you evaluate the data collected in your application. This information system is capable of analyzing all the data according to any of the characteristics that describe the data. You can also use any key figures you wish to categorize your data. You can display a number of objects for a given key figure, or a number of key figures for a given object. In addition, the system lets you carry out any number of variance analyses (such as plan/actual comparisons, fiscal year comparisons, comparisons of different objects, and so on).
You can produce both simple, data-directed lists (basic reports) and complex, formatted lists in drilldown reporting (form reports).
Drilldown report provides you with comfortable functions for navigating through your data. For example, you can jump to the next level of detail or the next report object on the same level, hide individual levels and switch between the detail and drilldown lists. It also provides a number of additional functions which let you process lists interactively (sorting, conditions, ranking lists, and so on). SAP Graphics, SAPmail and the Excel List Viewer are also integrated into drilldown reporting.
The drilldown functions are divided into three groups which differ in the number of functions available. That way each user can choose the functional level most suited for his requirements.
In addition to the online functions for displaying reports, drilldown reporting also provides functions which let you print reports. A number of formatting functions are available to let you determine the look of your printed reports (page breaks, headers and footers, underscores, and so on).
The menus and the functions available directly on the drilldown report make it easy to use the information system.
What is an Interactive Report?
An interactive report generally works in the following fashion:
1. Basic list is displayed.
2. User double clicks on any valid line
or
User selects a line and presses as button on the tool bar.
3. The corresponding event is triggered
4. Then in the code, the line on which action was done, is read.
5. Depending on the values in that selected line, a secondary list is displayed.
6. Steps from 2-5 are repeated till the end.
From the above explanation, I believe, its clear that, the 20th list, will essentially depend on the "selected line" of 19th list. According to your question, you want to move to 20th list directly, without "a prior list". May I know the exact requirement so that, an appropriate solution can be suggested?
Again, your question was, how to move to 20th list directly on pressing of execute button. Its not possible to move to 20th list. You must cross over a basic list, before you can go to a different list level, using the code given by Pavan.
What are Drilldown reports?
The lines of basic list of a drilldown report when clicked, will take the user to the corresponding (standard) object's display.
For eg: Suppose your report's primary component is purchase requisition, (assume you are printing PR details), and the basic list displays details of many PRs.
Eg: when clicked on a particular line of the PR basic list, it takes you to std t-code me53 (display of purchase requisition). This is the 'Drill-down' functionality.
For this, in the at-line selection of your program, as per the above ex: you'll set the parameter ID of PR number BAN (that you can get from Data element) in memory (using set parameter id) and then calling the corresponding transaction (usually skipping initial screen of the std t-code).
Likewise, if it's Material Number (Matnr), you'll be displaying MM03 transaction w.r.t. the line's matnr
Hope it will help u
regards
Bala

Can i use flash for ui and interact with c++ builder for the rest

i know flash can be used in c# in visual studio but i dont remember a thing of this interaction.
is it possible to interact with c++ builder and how?
the scenario is simple
use flash for UI (showing-viewing data) maybe for a kiosk or something without mouse simply with touch input,
use c++ builder for the rest , database connection data proccessing etc
any info will be greatly appreciated
thanks

I would advise proper punctuation and grammar on a public forum, but to answer your questions, yes, yes you can! Flash can be used to produce any commercial imagery or animations for the purpose of making profit, as long as you have a valid license you purchased from Adobe. You bought it, you can use it for whatever you want.
By "book", I assume you mean the "tutorial" book series made by Adobe? If so, the name of the series is "Classroom in a Book", there's one for each versions of Flash. Personally it hasn't been of much use and I would advise simply practicing by yourself and getting familiar with the tools. Look for online tutorials and publicly available projects and see how they work.

Classical and Interactive reports / BSP

what are classical report and interactive reports
I dont know anything abot BSP. How to start and what are the pre-requsites.
Pls provide me the useful link for that
Thank you
John

Hi,
Classical Reports:-
These are the most simple reports. Programmers learn this one first. It is just an output of data using the Write statement inside a loop.
Classical reports are normal reports. These reports are not having any sub reports. IT IS HAVING ONLY ONE SCREEN/LIST FOR OUTPUT.
Interactive ReportsAs the name suggests, the user can Interact with the report. We can have a drill down into the report data. For example, Column one of the report displays the material numbers, and the user feels that he needs some more specific data about the vendor for that material, he can HIDE that data under those material numbers. And when the user clicks the material number, another report (actually sub report/secondary list) which displays the vendor details will be displayed.

For BSP's
/people/thomas.jung/blog/2006/01/13/custom-bsp-extensions-time-stamp-and-range-ui-elements
http://searchsap.techtarget.com/tip/0,289483,sid21_gci886185,00.html
BSP Basics
If you search the forum aout the BSP, you will get more info
Regards
Sudheer

On my blog and several blogs I no longer can see infolink pop ups

In addition to not see my advertising pop ups from infolinks, but I also am getting error such as: nsIJSON.decode is deprecated. Please use JSON.parse instead. The problem with my infolinks and error seemed to happen around June 21st. I have a blogger blog and I am starting to crash on all Mozilla tabs. This is strange.

Do you use any ad blockers?
The nsI prefix is used more in coding add-ons than in coding web pages. A standard diagnostic for possible add-on issues is to try Firefox's Safe Mode.
First, I recommend backing up your Firefox settings in case something goes wrong. See [[Backing up your information]]. (You can copy your entire Firefox profile folder somewhere outside of the Mozilla folder.)
Next, restart Firefox in Firefox's Safe Mode ([[Safe Mode]]) using
Help > Restart with Add-ons Disabled
In the Safe Mode dialog, do not check any boxes, just click "Continue in Safe Mode."
Any luck?
If that doesn't help, when you have a problem with one particular site or platform, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
1. Clear Firefox's Cache
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Offline Storage : "Clear Now"
2. If needed, delete each site's cookies here
While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
(You either can do this as you visit each problem site, or change the domain listed in the search box at the top of the dialog.)
Then try reloading your blog(s). Does that help?

MV Query RE-write and Interactive reports

did any you of try queries that do a query re-write on your MVs in Interactive reports in apex 3.1?
bharat

Do you think this might be related to OracleAS?
This is my current hypothesis, I don't see any other explaination at the moment.
"Discoverer uses its own rewrite system when any of the following is true:
1. The database version is less than 8.1.6
2. The database version is later than 8.1.6 and it is not possible for
Discoverer to create Materialized Views.
The point #2 is applicable to my case.
Marcos, could you please point me to the source of this quotation?
My query is below:
SQL> explain plan for
2 SELECT O100096.LOCAL_DAY,
3         O100088.NETWORK_ABBREVIATION,
4         MAX(O102377.IMPRESSIONS_LIVE)
5 FROM DOMRSCH.DW_NETWORK           O100088,
6       DOMRSCH.DW_TIME              O100096,
7       DOMRSCH.TELECAST_DEMO_RATING O102377
8 WHERE ((O100096.TIME_KEY = O102377.TIME_KEY) AND
9        (O100088.NETWORK_KEY = O102377.NETWORK_KEY)) AND
10        (O100096.LOCAL_DAY IN (TO_DATE('20060515000000', 'YYYYMMDDHH24MISS'),
11         TO_DATE('20060516000000', 'YYYYMMDDHH24MISS'),
12         TO_DATE('20060522000000', 'YYYYMMDDHH24MISS')))
13 GROUP BY O100096.LOCAL_DAY,
14           O100088.NETWORK_ABBREVIATION
15 ORDER BY MAX(O102377.IMPRESSIONS_LIVE) DESC;
Explained.
SQL>
SQL> select * from table(dbms_xplan.display);
Plan hash value: 2592166193
| Id | Operation                     | Name                    | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT              |                         |    23 |   414 |     8 (13)| 00:00:01 |
|   1 | SORT ORDER BY                |                         |    23 |   414 |     8 (13)| 00:00:01 |
|* 2 |   MAT_VIEW REWRITE ACCESS FULL| TELECAST_DEMO_RATING_MW |    23 |   414 |     7   (0)| 00:00

I blog and cannot convert my ipad photos to a jpeg format on my ipad so that I can publish them. is there a way to do this ?

I have a travel blog and want to take my ipad when I am away but cannot add my photos (I have the photo converter kit) to my blog. Can someone tell me how to do this? I want to convert my photos in my ipad to a jpeg format so I can add them to my blog when I am on the go!

The iPad and most digital cameras (besides pro and pro-sumer versions) take pictures in jpeg format. Are you using some specialty app or a pro camera and RAW?
What bloging platform are you using? If Wordpress, I suggest using the Wordpress app since it allows for uploading photos.
What version of iOS are you using? It's possible that you are using the Web admin interface for your blog and since the iPad doesn't have a file system per se, on older versions of iOS Safari does not allow for uploading photos that way. iOS 6 allows you to take a phot or select from the Photo library.

Blocking Blogs and Forums "Manually"

Sorry about the title - couldn't think of a clever way of saying this!!
We have recently replaced our outdated proxy and filtering solution with a pair of IronPort appliances and are generally pleased with them.
However, one thing that has come up on a few occassions is that, even though the category Blogs & Forums is blocked for most users, there are still a large number of Blog/Forum sites that people can get to.
I understand that a URL category filter couldn't possibly cover every site, especially given the speed at which new ones appear.
What I'm wondering is if anyone has had any success with blocking these sites using a Custom URL Category with a keyword filter. My idea is that this keyword filter could look for "/blog", "/forum" etc. within a URL and then block it based on the assumption that it is a blog or forum.
If anyone has done something like this and is wiliing to share details of how they did it I would greatly appreciate it! :D

dangerousd,
You can definitely block based on regex keyword. I'm not sure how effective this would really be though.
Are you able to verify if the blog and forum pages not categorized contain the work 'blog' or 'forum' somewhere in the URL?
You could certain try this with little overhead (assuming the regex doesn't contain a .*) and then grep the access logs to verify what is hitting this new category.

How do I change template of an existing blog and the entries

Hi,
Is it possible to select a new template for an existing blog and the entries?
How?
JO

If you are meaning can you replace your existing blog template with a different template, the answer is yes, just copy and paste your entries onto the new blog and then delete the old one.

What is difference between interactive list and interactive reports?

what is difference between interactive list and interactive reports?

hi check this..
interactive report/list means any input(double click or single click or user command ) on the screen will results a new screen with the corresponding fields....this is upto 20 levels only check this..
report .
start-of-selection.
write:/ 'this is the source list'.
at line-selection .
if sy-lsind = 1 .
write:/ ' this is the 1st list'.
elseif.
if sy-lsind = 2 .
write:/ ' this is the 2 list'.
if sy-lsind = 3 .
write:/ ' this is the 3 list'.
if sy-lsind = 4 .
write:/ ' this is the 4 list'.
if sy-lsind = 5 .
write:/ ' this is the 5 list'.
if sy-lsind = 6 .
write:/ ' this is the 6 list'.
if sy-lsind = 7 .
write:/ ' this is the 7 list'.
if sy-lsind = 8.
write:/ ' this is the 8 list'.
if sy-lsind = 9 .
write:/ ' this is the 9 list'.
if sy-lsind = 10 .
write:/ ' this is the 10 list'.
endif.
regards,
venkat

Drilldown and interactive reports

hi,
is there any difference between drilldown and interactive reports.
if there exits , what is the difference?
kindly help me.
i will reward good points.
regards
thiru

1. There is NO diff btw Interactive and Drilldown.
2. get cursor.
get cursor field <field_name> value <field_value>.
when you double clik on any line in list..reads particular field instead of whole line (where you clicked).
3. Hide statement.
hides contents of fields to make availble to further list processing
press F1 on HIDE you'll get more info...

Blogging and interactivity??? Is it possible?

Similar Messages

Maybe you are looking for