"Bloodborne Server Not Found" - What's going on?

Ever since I have started playing this game, I have never been able to get to play it online and I am not sure why. I have a decent internet connection, a valid PS+Sub and more importantly, I can play multiplayer of all other games that I have, including ones on PS3 but just not this one and proving to be very annoying. When I choose to play online at start menu, it takes me through 3 stages, at times fails at second stage itself. When I say, 3 stages, I am talking about the prompts at the top right hand corner of the TV screen. Being more descriptive, what happens usually is as follows: Stage 1: Prompt--> "Checking Save Data" Action--> It is usually successful and should be because it is just checking the save files of this game. Takes me to second stage. Stage 2: Prompt--> "Checking Network Status" Action--> If successful, takes me to stage 3, if not, then throws an error prompt stating "Failed to acquire Bloodborne Server Information" and gives me the option to connect again or just play in offline mode. Stage 3 (only if everything in stage 2 goes fine) : Prompt--> "Connecting to Bloodborne Servers" Action--> This one is never successful, always errors out saying "Failed to log in to Bloodborne Servers" and gives me the option to connect again or just play in offline mode. I have advanced enough in the game to summon people for co-op mode (in short, acquired Beckoning Bell, if that doesn't constitute being a spoiler). I also tried searching for From Software's support system (email, website etc,.) and tried a method in another discussion forum where one has to uncheck the option to keep application suspended in power saver mode but both came out to be of no good. My disc is of the same region that my PSN is, confirmed by the label at the back where it says it is only for sale in my region. But put all together, I am totally lost. Can someone please help?

Most likely blocked or unopened firewall ports,manually opening ports for Bloodborne or setting up a DMZ should help.
https://www.reddit.com/r/bloodborne/comments/31wsqq/ports_to_open_for_bloodborne/
http://portforward.com/help/bloodborne/
http://community.eu.playstation.com/t5/PSN-Support/How-to-put-your-PS3-or-PS4-into-a-DMZ/td-p/10655314
The firewall ports listed on portforward.com are incomplete as they often are,the full Bloodborne port list is in the first Reddit article.Use the portforward link as a how to open ports,but the easier option is the DMZ setup but not always 100% guaranteed to work.

Similar Messages

Immediately reach Server not found but refresh goes to site immediately why?

Loading does not time out before immediately being sent to ''Server not found'' . Hit refresh and I immediately go to web site. Why does site not load on first try or at least time out trying to load?

I've noticed this surprisingly often with Firefox 5 (on Windows 7 64-bit like you). Sometime it takes 2 reloads. I can't figure out the pattern. Hopefully it will be fixed in a future update.

I update my iphone 3gs software from ios 4.1 to 6.1 but it couldn't activate and itunes displays that activation server not found what should i do now please help me.

please help me to activate my iphon 3gs , when i update my software from ios 4.1 to ios 6.1 then i connect to itunes & it displays that we are unable to continue with your activation or activation sever not found. pleses...plese help me .

We can't help hacked/jailbroken iPhone here, you have to google for solution.

Itunes continues to offer update to latest version, but after about 10 minutes, gives message that "service is unavailable" (.msi file is not found) What is going on?

Good morning everyone,
Since the most current version of itunes has become available for update, I will periodically get update notices to upgrade my existing version of itunes.
The problem (which, BTW, has never happened before in the 2 - 3 years I've had itunes on my WIN XP Pro SP3 computer)...is the update will proceed normally for about 10 minutes, then a dialog box opens stating that "A network resource needed is unavailable." It also offers the option to look elsewhere for a particular .msi file which it claims it cannot find (at the C:\...\.. link it displays...with a [BROWSE] button beside it.
Does ANYONE have ANY idea just what is happening here and how to resolve this very, increasingly-annoying, issue? As I indicated earlier...this issue has NEVER happened before. ALL previous updates have completed without incident. I have also tried doing updates from other Internet sites with the same unacceptable results.
NOTE: Itunes is ONLY on my WIN XP Pro computer. I have NO Ipad, Ipod, Iphone, etc.
Thank you for your time and any enlightenment!

Many thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Frequently get 'Server not found', have tried all articles solution, what now?

Frequently get 'server not found' when accessing web sites, no particular websites just randomly all sites, clicking 'try again' always resolves. I am thouroughly sick and tired of this error and no working soloutions! Have tried 'about:config' settings; pipelining, script_run_time, ipv6. Have tried reinstall of Firefox and update of firefox. Have allowed firefox in my firewall which is 'Comodo' and have deleted entry and re-allowed it again. Have tried firefox proxy settings on all choices of settings. These things do not fix the problem. I cannot find anymore information or solutions to try, I have searched everywhere and everything and tried all the things Ive found as mentioned above. What is the problem? Can it be resolved? How can it be fixed?

A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Firefox says "server not found".. but is found from other computers? whats wrong?

firefox says "server not found".. but is found from other computers? whats wrong?
== URL of affected sites ==
http://camaro5.com

See "Error_loading_some_websites": http://kb.mozillazine.org/Error_loading_websites [[Error loading web sites]]

Firefox 4 on Mac goes through periods of time where it brings "server not found" or "problem loading page" pages. I have to re-start firefox to get it to work again. Works fine on Safari.

Hi, ever since I was prompted to download the new Firefox 4, I have continuously been having this issue. I will type in a domain name and it will automatically prompt me to "server not found". The websites work fine on Safari and Google Chrome, but not firefox. I have uninstalled and reinstalled firefox about 4 times and I really need a solution!
Also, I have done all of the IPv4, Cache, and other solutions listed in the article on having certain sites not load. I'd appreciate some help! Thanks!

Did you ever fix this, because I am having the same problem

I get a message when going to any webpage "server not found" or "problem loading page". I click on try again and the page loads fine. This happens on bookmarked pages or manually entered urls. The issues started after I updated Firefox.

Server not found messages and problem loading page message since I updated to the latest version of Firefox. Usually will load the 2nd time after hitting the try again option.
Does not happen with Internet Explorer at all.

See:
*http://kb.mozillazine.org/Error_loading_websites

When i load a page i get "server not found", when i click retry it loads properly, what can i do to have firefox load page first time

When i load a page it often tells me "server not found". When i click on retry most of the time it works. How do i fix it so that it works the first time.
== This happened ==
Every time Firefox opened
== a couple months ago

You either have an extension that causes that issue or some security software (firewall) is causing a delay.
See [[Troubleshooting extensions and themes]]
Also make sure that Firefox gets full unrestricted access to the internet.
See [[Firewalls]] and http://kb.mozillazine.org/Firewalls

Getting "server not found" errors randomly. If I reload the page comes up fine. Why?

I'm on a Mac running 10.6.5 and using Firefox 3.6.13. All of the sudden pages I visit all the time are coming up with "server not found" errors, but when I refresh the page comes up fine. Sometimes the page loads, but in html code and all jumbled.
How do I fix this? Very annoying. I've been using Firefox for years and it's never done this. Nothing's changed with my connection or settings.

You detailed the situation very well dezi.
Amazing that so many people have this problem yet NONE of these so called "AWESOME" developers deem it important enough to address the issue.
I still have the exact same lame problem as you with 3.6.whatever it is now.
There are quite a few of these random"Server not found" threads scattered around here,all with a mounting number of "people have this problem"
On my old MacBook Pro, which runs 3.5.16, I have no such issue.
After 6 weeks of exhaustive research the only thing I have found is a fix aimed at PC users in which you alter the about:config settings (not that it would work for us or that if it is even possible) that affect something called DNS fetching. I am not a computer person so all the jargon about do this-do that goes over my head. However, to get this solved I will learn what it takes.
I hope we get some real answers soon
(and none of that "empty your cache and cookies" garbage either)
Signed,
Frustrated as hell

Error "kdc: Server not found in database" on attempted connections using Network User Credentials

I am rebuilding my system after a recent debacle with Time Machine, which resulted in a complete wiping of my Open Directory contents. At this point, users can log into various computers on the network, when the hosts have been reconnected to the newly formed Open Directory and the trust certificate has been authorized. However, when users attempt to connect to any file share, the Network User Account credentials fail to gain access.
I am running Mac OS X 10.9.4 on all systems. Two mac-mini's are running OS X Server 3.1.2. One of these servers (mavericks1.pediatricheartcenter.org) is the Open Directory. While testing the system, I am using the console on "Mavericks1," so the following discussion involves communication between the two server hosts only.
From Mavericks1, I open the console and attempt to connect to my file server, named fileserver.pediatricheartcenter.org. I clear the console just prior to sending a "registered user" request to "FileServer" to gain access. Careful examination of the console records shows the following:
1. The Network User is authorized with a message "ENC-TS pre-authentication succeeded".
2. Mavericks1 lists a console message that reads "kdc: Server not found in database: krbtgt/[email protected]:no such entry found in hdb"
3. Mavericks1 lists a console message that reads "kdc: Server not found in database: cifs/[email protected]: no such entry found in hdb"
4. The process registers what appears to be a final failure before trying again with "kdc: Failed building TGS-REP to 127.0.0.1:64390"
FileStorage.local does not exist in the DNS, nor does it exist on FileStorage.pediatricheartcenter.org. That (local) host name was removed when the domain host name for filestorage.pediatricheartcenter.org was created.
1. Why does the kerberos process reference a host name that does not exist?
2. What might be causing the failed authentication exchange?
3. What can be done to remedy the issue?

I spent some time on the phone with Apple Support on Friday. Thank you to Linc Davis for providing some insights into the issues.
As a result of the conversation with Apple Support we learned the following, which I will report here for those who might find this page again:
First, OpenDirectories are extremely fragile. Once you have turned on your OpenDirectory, do not do any of the following:
Do NOT change the host name.
Do NOT change the IP address.
If you are going to attempt either of these things, you should make a clone of your drive (not just a TimeMachine backup, a fully bootable clone, just in case).
Performing these activities (particularly the changing of the host name) will "break" your open directory, and the only way to rebuild the open directory is first to fully destroy the original. Several services are also destroyed when OpenDirectory is broken, the most notable is Profile Manager.
DESTROYING OPEN DIRECTORY
To fully destroy OpenDirectory, it is more complex than simply turning off the OpenDirectory and turning it back on again. Perform the following steps:
Install WorkGroup Manager (it is depricated, but Apple still has a version available for use with OS X Mavericks to handle functions that the Server App does not perform like exporting users and groups).
Sign into WorkGroup Manager as the directory administrator (user name defaults to "diradmin" the password is defined on OpenDirectory creation).
Export the Users, Groups, Computers and Computer Groups to the Desktop or another safe location.
Close WorkGroup Manager
Turn off the OpenDirectory in Server App.
Delete the Server App from the Applications folder and put it in the Trash. (This will disable any active services that are marking various files as being currently in use. Don't worry, we will restore it from the Trash when we are done).
In the terminal, run the following command: sudo slapconfig -destroyldapserver
Make a backup of all website files (just in case)
Navigate to the folder /Library/Server and delete the ProfileManager folder. (If you willing to do so, delete the whole Server folder).
After deleting various folders in the /Library/Server directory, restore the Server.app from the Trash.
Run the Server App.
Set the computer's network connection and host name.
Create a new OpenDirectory.
Use WorkGroup Manager to import any exported files from Step 3.
If you deleted the entire Server directory, use the website backup to retrieve the files that comprise your web site(s) and use the Server App to link the file directories to the Web site's domain name(s).
Personal Note: These instructions got me farther than any other tips I had received previously. After following these instructions, I was able to rebuild my Open Directory. During the process of copying files from the old user home folders into the new user home folders, the computer froze and when it rebooted, all the users and groups I had created during the day had disappeared. Rather than trouble-shooting it again, I decided to do a fresh installation.
A NOTE ON HOME FOLDERS
PER APPLE SUPPORT: Do NOT use the default /Users directory for Network users. Apple Support wanted me to rebuild the home directory, but they noted I was not able to do this, because I had used /Users. This folder ("/Users") is a critical component of the OS X system, and will cause additional problems if the folder is destroyed and rebuilt. The directory id and permissions must remain unchanged from the original installation.
For this reason, Server administrators (like yourself) should use File Sharing in the Server App to create a new anchor point for home directories. Create a shared folder. Ensure that it is shared over the protocols that you will be using (AFP, SMB, WebDav), and then after selecting these values, check the box that allows the folder to be used as a home directory at the bottom of this list. This box will be greyed out if the system is not already bound to an OpenDirectory. If you have activated OpenDirectory on the same machine, the machine will operate as if bound to itself, and this field will be active. If the FileShare server is NOT an OpenDirectory master or replica, then bind the machine to an OpenDirectory via the "System Preferences > Users & Groups > Login Options".
If the local area network has FileShares that are enabled for home directory use, the folders will appear in the User Profile editor under the Home Folder list (See image)
In the screenshot above, I have selected a shared directory named "HomeFolders". By using specially defined home folder directory, the server administrator has the option of deleting and modifying the home folder if necessary. Creating a home folder directory in a location other than "/Users" is the recommended best practice by Apple Support.
If you are inserting files into the home folders, you will need to change the owner and the group to the new owners names. I copied files from the old user directories into the new user directories so that the users would have access to their old files. When my OpenDirectory crashed, and all the users were recreated, they were recreated with different system level user id's. The system therefore maintains a memory that the file was owned by the original owner, even though the system administrator has put it in the new user profile's folder. To fix this, do the following:
1. Prior to making the copy, run "ls -al" from the terminal on the new home directory root. You are looking for the default folder owner and default folder group. On my system it was the user name and a group named "staff".
2. When making the copy, do not replace the user folder. Copy the files into the file folder, not over it.
3. After you have moved files into the user's folders, you can use "sudo chown -R [owner]:[group] [homeFolderPath]/*" and "sudo chmod -R 700 [homeFolderPath]/*" (replace the [owner] and [group] portions of these commands with the owners and groups identified by the command in step 1, and replace [homeFolderPath] with a path to the user directory created for the specific user.
For example:
For the user johnnybgood, we might see the following:
1. We run "ls -al" on the newly created home folder and find that the folder /Volumes/HomeFolders/johnnybgood is owned by johnnybgood and the group "staff".
2. We copy or move files from the old locations using commands similar to the following:
       sudo mv /OldFolderLocation/johnnybgood/Documents/* /Volumes/HomeFolders/johnnybgood/Documents
       sudo mv /OldFolderLocation/johnnybgood/Desktop/* /Volumes/HomeFolders/johnnybgood/Desktop
       sudo mv /OldFolderLocation/johnnybgood/Music/* /Volumes/HomeFolders/johnnybgood/Music
       ....etc....
       (notice how we are not just moving the old johnnybgood folder to the new location.)
3. Next, we change the ownership and file permissions:
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Documents
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Desktop
       sudo chown -R johnnybgood:staff /Volumes/HomeFolders/johnnybgood/Music
       ...etc...
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Documents
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Desktop
       sudo chmod -R 700 /Volumes/HomeFolders/johnnybgood/Music
       ...etc...
4. Let the user log in and use the system normally.

Firefox periodically shows "server not found" message for Verizon/Yahoo email. Often self corrects in 5 to 10 minutes ?

System is Windows VISTA. While on Verizon/Yahoo mail Firefox will lose the connection and shoe a "server not found" message. Explorer will connect with no problem to the email server. The problem self corrects with in 5 or 10 minutes but this may happen 5 or 6 time in a day.
Is this a Firefox problem with proxy access. Settings appear to be the same.

i forgot to mention , that when i striped this machine back down to 10.3.7 and before i re built i did do a hardware check with the original install Disks [3] and every thing came back clean.
the weird ness with the colors on window, if i pass a app like text edit over the area , the color will not cover the app but stay in the background.
when i first saw this color thing i had the preference pane out and was moving it around on screen and the colors were bleeding off of the preference pane onto the screen.
if you have any idea as to what is going on here let me know.
thank you

"server not found" with one ip address but ok with vpn ip

Windows 7 For the last few days I get "server not found" message when I try to access many sites (including Mozzilla help). This happens with ie also.However when I use a different IP (via my VPN) everything is OK.
What is going on?

Server Not Found - Troubleshoot connection problems
*https://support.mozilla.org/en-US/kb/server-not-found-connection-problem

Server Not Found - php in CS5.5 'Live Code' Issues

Hi
I'm new to this Forum, so hello to one and all.
I have just started to learn php and was lead to believe that CS5.5 would be able to let me see what was happening when I place a new bit of php in the Live View. However, all I get is an error code saying the following:
Server Not Found
The page "http://ftp.sharkdesigns.co.uk/public_html/php.php" was not loaded because Dreamweaver could not find the server "ftp.sharkdesigns.co.uk". Please make sure you are connected to the internet and the server name is correct.
Not being a computer buff I have no idea why this should be happening, since I have built my web site on the CS4 version without any issues.
I have learned some HTML, CSS etc. by sheer trial and error, since the books I have assume that you know what you’re talking about to be able to read what they are talking about, but nobody explained what they are talking about when they talk about the stuff that you need to know … Confused? Join my world, because I’m so confused that I have lost track of everything I have learned and don’t know where to look in the hope that an answer will materialise. The problem is that I don’t use the special terms that are so common in this industry often enough to remember what they actually mean for more than a few minutes, so when I try to learn something new, I have to start all over again as if I didn’t know anything at all. By way of added frustration, I also don’t know what to ask or how to ask for it because I don’t know that it is there to be asked for in the first place (example: - if you can’t spell the word ‘One’, and there is no one else to ask how it is spelled, how do you look it up in a dictionary unless you can already spell it?).
The problem I have is that if it works I can use it, but if it doesn’t work you need a Masters degree to get it to work to use it, which I don’t, and there is just on one to ask what is going wrong. So unless you know what to ask and how to ask for it, which I don’t, you just have an error message that stumps you before you have even started.
I know that this is a lot of rambling, but I just need my system to work so that I can lean a little php to make my web site run better, and there is no one I know who can help.
Can anyone help?

Mark Shark Designs wrote:
Hi
I'm new to this Forum, so hello to one and all.
I have just started to learn php and was lead to believe that CS5.5 would be able to let me see what was happening when I place a new bit of php in the Live View. However, all I get is an error code saying the following:
If you have just started to learn php then you will want to set up a local server testing environment to test your pages rather than keep uploading the files to your remote and checking them out, which seems a bit backwards to me if your'e going to be using php a lot.
For PC:
http://www.webassist.com/support/documentation/how-tos/xampp_for_windows.php
For Mac:
http://www.webassist.com/support/documentation/how-tos/mamp_for_mac.php

GSSAPI Error: Server not found in Kerberos database

Hi all
For about 3 days I'm now seeing this error message in system.log every 3 minutes:
DirectoryService: GSSAPI Error: Miscellaneous failure (Server not found in Kerberos database)
This happens on a fileserver which is connected to an OD server.
I did a search in this forum and found one thread about it. The advice there was to look in kdc.log to see which principal is failing - but I don't have a kdc.log. The other tip was to use kadmin to get a list of the principals by using
kadmin.local -q listprincs
but what I get instead of this list is:
Authenticating as principal xyz/[email protected] with password.
kadmin.local: No such file or directory while initializing kadmin.local interface
It seems that some file is missing, which would explain why DirectoryService can't find the server in the database... I have to confess that I have no idea as to how Kerberos works or how to configure it.
Authentication against the OD server is working fine, it's just that the errors in the log are getting on my nerves, and they make it difficult to find other, more important messages in system.log.
Thankas, Tina

Ah, I see, the kdc.log is on the OD server, not on
the file server where I was looking for it.
OK, in the kdc logfile I have a lot of entries like
these ones:
Kerberos is an auth system where the user authenticates to the kdc and is issued a TGT (Ticket Granting Ticket). The user then presents their TGT and a service principal (Kerberos name of a server) to the kdc to get a service ticket. The user then sends the service ticket to the server who lets the user in.
Some interpretation:
Mar 22 09:18:35 zool09.abc.xy krb5kdc[218](info):
TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.23:
UNKNOWN_SERVER: authtime 1143003387,
[email protected] for krbtgt/[email protected],
Server not found in Kerberos database
This (TGS_REQ) is request for a service ticket from 130.60.23.23 using the
TGT owned by [email protected], to get a service ticket for
krbtgt/[email protected]. It looks like krbtgt/[email protected] is not in your kdc's database. This looks like a cross realm request.
If you are also connected to an active directory system you might see something like this.
Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
AS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
NEEDED_PREAUTH: [email protected] for
krbtgt/[email protected], Additional
pre-authentication required
Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
AS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
ISSUE: authtime 1143015560, etypes {rep=16 tkt=16
ses=16}, [email protected] for
krbtgt/[email protected]
The AS_REQ's above are the two step authentication process for user [email protected] from 130.60.23.11.
Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
UNKNOWN_SERVER: authtime 1143001370,
[email protected] for
krbtgt/[email protected], Server not
found in Kerberos database
This is another service ticket request. Though the requested service principal looks malformed, I would look for something misconfigured on 130.60.23.11.
Possibly watch what user zds01 is doing during login to get some idea of what's going on.
Mar 22 09:19:20 zool09.abc.xy krb5kdc[218](info):
TGS_REQ (7 etypes {18 17 16 23 1 3 2}) 130.60.23.11:
UNKNOWN_SERVER: authtime 1143001370,
[email protected] for
krbtgt/[email protected], Server not found
in Kerberos database
Same as above.
What do they mean? I didn't set up Kerberos
authentication, I think I don't need it, is there any
way to disable it? Or am I using it without knowing
it??
When you set up the OD Master, a kdc & the needed files were set up to allow single sign on to all the kerberized services in the system.
- see if you have an
/Library/Preferences/edu.mit.Kerberos file
- Also look for an /etc/krb5.keytab file
Yes, I have both of them.
kadmin.local -q listprincs on the OD server gives me
a long list of computers, users and services like
this:
I don't know what these all mean... could you give me
a brief explanation?
[email protected]
When you create a computer record in Workgroup Manager a generic principal name is added to the kdc for that computer. It is related to the host/computer_name@REALM service principal for servers.
[email protected]
This is a user principal (this is the account name for the user in the Kerberos system) Sometimes you will see user/admin@REALM.
afpserver/[email protected]
This is a service principal. They usually are in the form servicetype/server_dnsname@REALM
One of the things that Kerberos is very sensitive to is correct DNS configuration. You need to have both forward (name -> IP) and reverse (IP -> name) DNS set up for all the servers in your realm.
Hope this helps
- Leland
DP G4 Mac OS X (10.4.5)

"Bloodborne Server Not Found" - What's going on?

Similar Messages

Maybe you are looking for