Bloom tone sounds different after ios5

Has anyone else noticed that the "Bloom" sound is different since loading ios5?  It is doing it on two phones.  It's like it gets cut off halfway through the sound when a text comes in AND when you just go to the sound menu to test it.

Hey!! I've got the solution.
this is some what a format problem.
if you see a aac file, it's not all the same aac format. there are, aac low complexity VBR, aac low complexity CBR, aac high-efficiency. the files are being corrupted are the aac high-efficiency. make sure you don't convert your file using aac HE or high-efficiency.
to check if it's HE,
in itunes left click on a song and click "get info", go to "summary tab and it will appear on the right upper corner..
you'll have to delete the files with HE on the ios device, convert the original files to low complexity then load it again to your ios device.
I don't know why it sounds wrong only on iOS 5 though...
hope it helps!!

Similar Messages

  • Message sound differs after upgrade to ios5

    messsage sound differs after upgradded to ios5 please let me know how to do it
    andd also reqquired how to downgrade to ios 4.3.3 i dont have shsh

    Try "resetting" the device...
    Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.

  • After ios5 update, I am not getting any sound when I play music.

    After ios5 update, I am not getting any sound when I play music (iphone  speakers or headphones).  I get sound from games, previewing songs in iTunes, etc.  Any idea why?  I've resynced and shut down my phone and that didnt help.
    iPhone 4

    Beer,
    is that when you want to play music over the air (airplay) like BT headset or something?
    because i am facing the below issue in my car.
    the phone minimizes the volume of airplay and the ringing to 0 when connecting to a device (BT headset or car kit)
    upon disconnecting, the ringing tone remains 0 and i miss all or most of my calls.

  • Whatsapp tri-tone sound after the update?

    I have an iPhone 5 running latest IOS 7.  I recently did the whatssap update release a few days ago.  First update after the Zuck bought them.
    Besides some of the obvious changes I noticed that the tri-tone sound you receive when there is a new message has diminished.  Allow me to explain...right now it sounds faint, weak with some kind of sprinkle effect on it.  I don't know how it happened as this is probably something to do more with the phone but I swear it did not sound like that before.
    This is how it's supposed to sound: (if video doesn't come up look up iphone tri tone onyoutube)
    https://www.youtube.com/watch?v=XoJUYQk_FMI
    Prior to the update the sound was bold and loud.  I know you'll probably thing this duy is crazy but it's the **** little things that drive us insane!
    aaaarrrggghhhhhh

    me too. I have the same problem and I don't like the new one.
    I Like the old one and i'd like to give it back.
    I Think we can download the original the one in your link above
    and we can choose it as a new measage notification in whatsapp

  • My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

    My 2008 15" macbook pro would not start up. After pushing the power button, the startup tone sounded, but kept repeating as if something was jammed. Screen remained black with no logo nor messages. Pls help.

    Now that you mentioned it, that might be the source of the problem. Something was definitely wrong with my graphics card before the incident happened. You mean that particular batch of graphics cards had some inherent issues, right? I went to the genius bar, and the 'genius' there, without trying to diagnose the problem properly, just adviced me to buy a new mbp! He said Apple will no longer try to fix or touch macs older than 5 yrs. Mine is 5.5 yrs old...

  • BB Pearl Flip - ring tones/sounds quit and shuts itself off

    I'm having major problems with my phone since I got it. 
    I'm on my fthird phone since May 2!!!  On exactly 8 days on the first phone the ringers/sound would quit and would say there was an error on the phone and wouldn't play the sample music.  I brought it back to my dealership and they gave me a new phone.  On day 8 again the same problem happened!  My dealer suggested buying the extra memory chip and I put it in the phone...I did.  The only thing I have downloaded on that phone was msn and facebook.  It was also shutting its self off during day 8!  8 days later again the ring tones/sound wasn't working!  I went back to my dealer and got a new phone.  This time he said to only download facebook and not msn in case it was a memory problem. Now yesterday was day 8....and again the ringtones/sound doesn't work!  I don't download anything...no music, videos not even any ringtones!  Not hearing your phone ring is somewhat of an important feature to the phone!! Oh and when it's acting up the only way you can get it to stut off and reboot is to pull the battery!..and we all know how long it takes to reboot! you might as well come back in an hour!!  Then it will reset and will be okay for a few days! ( or this has been my experience so far!!)
    This is my first blackberry and honestly will probably be my last!  I haven't been impressed!  I want to see if anyone else was experiencing this type of problem. I have 30 days again until I can't exchange it and if I can't get this figured out it will be going back and I'll be getting something different!

    I had a similar problem with my first 8230 that I rec'd in late April of this year.  After only a few days the ringer stopped working and nothing I tried and nothing Bell support did either via the wireless network or at a local Bell Store was able to restore the notification profiles.  I had the phone replaced (within 2 days via purolator after I returned the defective one and have since had no problems ... have changed the notification profiles several times in the interim.  I'd try several things like making sure you have the most up-to-date software version, and current service books offered by your carrier, before chucking it with BB.   For my part, I'm loving the Flip, but will probably be upgrading to a Curve or Storm at the first opportunity (next April!).
    r

  • Cannot restore from back-up after iOS5 upgrade

    First try to restore after upgrade (original uppgrade process) iTunes said last available backup was time-stamped 11.34 but when chosen it was not accessible due to error 32 Backup missing.
    Trying to reset the unit to gain access to older backups iTunes claims my password for the backup is incorrect even though I know it's correct, thus I cannot resore after iOS5 upgrade.
    Looking in the folder (win XP machine) where the back-ups are stored it seems like there are no older backup available and my whole pic and vid library is gone! 2.5 yrs of images of my children!!!
    What to do?

    Sounds similar to my issue, I know my password is correct, even changed password in hopes that perhaps I was making a mistake, yet I wasn't. I backed up all my pix on an alternate computer, but my issue was that I used the voice memo recorder to record songs on the fly when I'm not at home, or just too lazy to hook up my studio gear. . . All that was backed up. . . yet, I'm told I'm entering the wrong password, I know it's not, but I guess I don't know how to type. . . I haven't searched for backup files in any location, other than looking to see if my pix were backing up as it quit syncing pix a couple months ago. No pix were backed up, so I plugged into a different computer, and that pc took em just fine.

  • I've recently spilt a little bit of water on my Macbook Pro 13" and some of it went into the keyboard, the first thing I did was get paper towels and dry it off, everything is except now the speakers sound different, and a little bit lower in volume

    I've recently spilt a little bit of water on my Macbook Pro 13" and some of it went into the keyboard, the first thing I did was get paper towels and dry it off, everything is except now the speakers sound different, and a little bit lower in volume, basically the speakers just sound weird, there's no word to describe it, I can't really hear any bass from my speakers

    Liquid spills, why your MacBook chassis is a one-way valve for spills
    After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
    The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
    Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
    After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
    There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
    Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
    In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
    In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
    contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.  

  • My 4s seems different after last upgrade

    should my 4s be any different after this last upgrade. My calander sound will go off but when I open it the sound will not shut off. My autofill is not always working

    Do the basic troubleshooting steps described in the User Guide, Appendix B:
    Restart, Reset, Restore

  • After ios5 upgrade can no longer increase font size on iPad or iPhone, any suggestions apart from getting new glasses!! Also the backlight on the iPad isn't as bright as before. Any ideas?

    After ios5 upgrade can no longer increase font size on iPad or iPhone, any suggestions apart from getting a new pair of glasses! Also, the backlight on the iPad isn't as bright as before the upgrade, any ideas?

    Hi Zak, thanks for the reply.
    The filename is whatever is set to be the background fill of the site (I presume the desktop background fill, if mobile versions are set to be different). I've tried a number of different files, sizes and types/formats and the result is still the same, so as far as I can tell it's not the file itself causing the issue...
    It uploads all pages (desktop, tablet and phone versions), .css files and .html files, and even the favicon .ico file but then hangs on the first image file, which incidentally is the background fill image.
    The total number of files is said to be 154. It gets stuck on file number 24.
    Yes the "Resume" dialog appears and upon clicking it just attempts to continue from the hang at the first image file (apparently 66% of the way through).
    Re: the "BC site has changed" part - I thought as much but figured worth reporting.
    ... Incidentally, as I've written this reply, I left the "Resume" dialog open (ie neither clicking "resume" or "cancel" and just as I've finished typing it appears to have published the site successfully?!! (I must've left it for roughly 5 minutes)
    Bizarre behaviour... I'm not sure if this will repeat itself with other sites but I'm sure there's a bug here that needs looking at regardless...?!
    Any thoughts?

  • Different ring tones for different email accounts

    Is it possible to set different ring tone for different email accounts?

    No - but you can change the sound for the email the notification in the settings .... Settings>General>Sounds>New Mail> and select another sound from the list, but that will use the same sound for all of your email accounts.

  • Music will not play after ios5 update, it still appears there but will not play...if I select a song, it jumps to another song but will not play anything.  Also, if I try to play any of the files on the phone from iTunes they won't play either...help!!

    No fix for getting music to play on iphone4 after ios5 update...
    Cannot find how to manually sync according to someone else's fix...
    If I try to play any of the songs already on the phone from the iTunes software, they don't play either...
    FRUSTRATING!!!   Please help!!!

    Hopefully Apple is trying to clean up this mess of an opperating system

  • Midi loops in browser sound different in arrange window controller messages

    I have a problem with controller messages as well with fx
    I audition a midi loop it has FX and then drag it to arrange window
    sounds different, I know of ther is another topic about the FX,
    But as well controller messages not being read right
    say a Timpani loop, foot controller is not reading
    so the timpani roll is gone

    This is not a problem, it's intentional design.
    The preview audio contains reverb for these instruments, because the sound is in context - it let's you hear it how you are typically going to use it, and use can use it as an audio loop without problems.
    When you load it as MIDI, it does not add another reverb to the channel because it assume you are going to use a global reverb, rather than add individual reverbs per channel - this is the generally better way of doing it, and avoids new users having a hundred reverbs on individual channels when they only need one.
    As for articulations switched by MIDI, the preview audio can contain only one sample, but if there are different articulations, they need to be played/switched accordingly.
    It's not a bug, it's the way it works for flexibility in the main. You have to remember, that when stepping up from a entry-level program to a professional one, a lot of hand-holding that the entry level programs do is no longer there, and so you can feel like the pro version is "less good" than the entry one. This is not the case - professional users do not need hand-holding, and that generally gets in the way.

  • MIDI Loops sound different in preview

    I'm a new user to Logic, and I'm confused about the green (MIDI) loops. When I preview one it sounds one way, but will sound different when I drag it to my arrangement, even when having it create a new track. On many of them it sounds like it's just missing some reverb, but the change is more drastic in others, eg. "Desire A Cellos", where it sounds like the wrong samples have been loaded.
    Also I noticed that it loads instruments like "strings" and "piano" where I would expect it to be using the more sophisticated EXS sampler.
    Is this normal?
    If I listen to a loops like "Concert Hall Piano 4" it sounds way more realistic in the preview than it does when I let it play the MIDI in my track. My first thought is that this must be because the "Piano" instrument doesn't know how to handle the extra midi data such as expression.
    Is anyone else having this problem, and what can I do to fix it?
    Thanks,
    -Emil

    enjakobsen wrote:
    Also I noticed that it loads instruments like "strings" and "piano" where I would expect it to be using the more sophisticated EXS sampler.
    To answer this question, loops are created to be used with Garageband, so all of the instruments selected will use Garageband instruments.
    The other more important question....I DON'T KNOW! Great question, I'm having the same issue with mine. I hope someone can shed some light on this. If you double click the 'strings' instrument in the channelstrip where you have your 'Desire A Cellos' and select the 'Cellos Pizzicato' preset instead of the 'Cellos' preset that is selected, you get much closer. It seems like it has defaulted to the wrong setting. Your right though, there's definitely some verb there too. And also, if you then change your song key, the loop in the arrange window should change with it, but mine is not.
    HOWEVER....If you drag a GREEN loop into an audio channel instead of a MIDI channel, it will create an audio file loop (like the blue loops). As far as I can tell, they sound exactly as they should, and they do change keys. Still though, very strange. Perhaps tis a bug??

  • Midi Apple Loops sound different when dragged on to song

    When ever I drag a green midi loop from Apple Loops to my song it sounds different. All the effects are gone. I tried to put som reverb on it but it doesn't sound like it does wheyn played in the Apple Loops bar.
    How can I use the green midi loops from Apple Loops as they sound there with that effect. The blue audio Apple Loops works fine.
    I had this same problem in Logic Pro 9

    There are some differences between the audio file previews contained in the loop and the actual data, sometimes by error, sometimes intentionally so.
    For instance, if you preview an orchestral instrument, you hear it with reverb, as that's kinda how it's intended to sound, but when you drag it into Logic proper, you don't get reverb - because you will have one global reverb you send all the orchestral instrument too, rather than a hundred individual reverbs on each instrument.
    Stuff like that. It varies, but there's nothing broken as such.

Maybe you are looking for