Bloqued Stock Default into REM Profile

Hi everyone:
I need to know how can i be able to set the Stock Type to REM Profile, 'cause I need that the result of the Posting into MFBF T.code be Blocked Stock, instead of, Unrestr. Stock.
I was trying by the REM Profile into: IMG guide: Production> REM > Control > Profile... but... I don't get to find out the check or the configuration parameter to set this stock type. I know that into the MFBF there is a function with F5 to Change Detailed Setting but, I need this parameter pre set for all access into that screen and don't is changing it each time i go to this T code.
Please & Thanks in advance for your help.
Regards
Omar Perea

Hi OMAR ,
Could you pleasse breif How you did the setting, even i require GR atomatic By MFBF, I tried with 103 it is giving Below error ,
Update control of movement type is incorrect (entry 103 X X _ F)
Message no. M7226
Diagnosis
The system could not find entry 103 X X _ F in any of the movement type control tables.
Procedure
Cancel current processing.
Contact your system administrator.
Action to be taken by the system administrator
Check in Customizing for Inventory Management under Copy, Change Movement Types whether the entry is contained in the Update control view for the movement type.
If the entry is missing, proceed as follows:
For standard movement types, this means that the given process is not supported using the present data combination. Do not create any entries without prior arrangement with your SAP consultant. Otherwise, incorrect postings may result.
For customer-defined movement types (beginning with 9, X, Y, or Z), this may mean that they have not been fully defined. Delete the movement type and re-create it by copying a standard movement type.
so could u explain me the process how u did ,
Thanks in advance.
Madhu

Similar Messages

"You are no longer logged into your profile" - So....Palm just decides to delete my data???

I was told to post this over in this Palm forum also so hopefully SOMEONE from Palm/HP will address this... I could not find a bug report area but perhaps someone can log this.
So after months of (mostly) happily using a Pre Plus, Wednesday I get the message that I am no longer logged into my profile, and do I want to reboot or erase my data??!! I googled, and yup, it's an issue....So I reboot...same options, this reboot, it starts and asks me if I want English as my language. Woops!!! No data!
Now of course palm profile does not backup anything on my phone really....I sync direct to Exhange and use Chapura sync to a desktop Outlook PST file. So I spend the next 5 hours restoring and syncing. Just crazy. Why can't it just say that you are not currently logged in, we will try again in an hour?? And what right does palm have to delete MY data that the profile does not even backup??? My exchange and chapura sync'ed data? Sure, I can re-sync with both of those. But my Chapura only if I am on the same wi-fi network as the local PC. So what does that mean if I am traveling? And re-syncing a huge volume of contacts takes forever. And you lose all the linked contacts also!
So I call the carrier and Palm. The carrier says...."well if your phone originally was under another phone number and you changed it as part of an upgrade, that can cause it." Huh? This can affect me months later I say??? My phone number upgrade change was done BEFORE I even turned on the phone. Palm does not even know about that first number!
So I called Palm. The guy says it can happen if 2 people use the same e-mail or credit card in their palm profile. Now since it won't even allow you to setup the same e-mail twice, I'd like to know how THAT would happen. No one on my plan uses the same card.
So the question is. We know this happens sometimes. Is there any source with credibility that really knows WHY this happens??? And does any setting reduce the likelihood of it happening again? And why can't Palm make the results less debilating? There is NO REASON that it needs to delete your data. This is crazy.
Also, other than my few purchased apps, none of my critical data is even backed up by the Palm Profile!!! I still had to re-create all my POP3 accounts, change all my preferences back, re-sync with Exchange, re-sync with Chapura, and then re-marry all the contact duplicates that Synergy did not handle right. So what's the worth?
Can the Palm Profile/backup be turned off? Does changing the palm profile in the apps perferences setting from "submit password every 4 hours" (whatever that means) to only at purchase help??
Do you have any other options when you get that reboot r erase prompt? Pull the battery without answering the prompt perhaps???????
If I am on the road and this happened, I would be without half my contacts until I returned which is unacceptable. This is very disappointing. I cannot believe the default action is not "let's TRY AGAIN", and not, "hey, let's erase all of this user's data on him"!!!
If this happens one or two more times, I have had it. I will be looking at another OS and phone after having Palm phones and organizers for the last 10 years or so. This is unacceptable.
BJB

Thanks for the reply. Nowhere in here do I get the sense that Palm even thinks this is a problem or are going to work on fixing it. It implies Palm thinks it is okay and the problem is me, the user, the customer, because I do not want my data resided on Palm's servers or Google's servers. Does Palm understand this is an issue whether my data is on my home PC or in the cloud and in Palm Profile??? The issue is not how I choose to store just one of my calendars and contact lists (out of 3). The issue is a bug in the Palm profile system.
The first point is this.... Regardless of HOW this happens, Palm should not immediately erase all of my data!!!! Let's say I DID sync all my data to Palm Profile. I STILL would not want to have to re-download everything just because of some glitch with your backup servers, the carrier's network, or my phone!!! Go look at some pre forums. You will see many people that DO sync all of their data to their profile, and they are STILL upset with this Palm BUG. If security is the concern, how about asking for a password first vs. just asking whether I want to reboot or erase all data? If it is really me, I would know the password! Your answer seems to imply that what is happening is OKAY. It is NOT okay whether I sync everything to Palm profile or not!
Further, even if all my data WAS backed up to Palm Profile, you still lose all preferences, all manually matched synergy contacts, etc.... etc... Again, I would still be very upset if all my data was erased even if EVERYTHING was backed up to Palm profile. DON'T ERASE MY DATA!!!
I have no problem re-synching my exchange e-mail after a problem. It works from the road, etc. However after 10 years, Palm decided to not suport the syncing of home PC's with the Pre. An unfortunate decision as Palm was a pioneer in this. You talk about security....Perhaps some of us do not want our data stored on Palm servers or google servers!!! Yes, indeed, in the event of a crash I cannot restore from the road. I can live with this if the crash was from a hardware or software issue. But it is NOT OKAY if it is caused by Palm just because of some system glitch. Since you are not restoring my home PC data anyway, why erase it?
You talk about being logged out of your profile. My phone was just used, and it was sitting on my desk. Just sitting there. And then it popped up that "I was no longer logged into my profile". What causes this? Why does it not give me a chance to re-login? How come after the erase of data and reboot I was then magically "logged in" and it was working? Did the person that was trying to steal my non-existent data in my palm profile stop trying?
So are you telling me that someone was trying to use my phone SIM, on a pre plus, with my e-mail, and had my password....and trying to login, and that is why I got the message? And then magically right after I rebooted, they stopped trying and all was okay???
I do not believe that is the case. And again, if it is, ask for my password, or a security question, or SOMETHING to confirm that it is me. And a simple google search will tell Palm/HP that this is a problem many of us have had. If I have it consistently, as I said, a 10 year customer is gone.
BJB
PS. A reply that said: "Palm is aware of this problem and will correct it with the next software update" would be a lot more comforting.

Changed REM Profile regarding generation of postprocessing records

Hello Team,
I have tried to backflush a part number. I get this error:
Changed REM Profile regarding generation of postprocessing records
The intrigue here is that this same part number was backflushed last week without error.
I will appreciate your inputs.
Thank you in advance.

Joel,
Check the material master for changes in REM Profile assignment, looks like the REM profile assigned to the material does not allow Post Processing records, so if there are errors during backflush like less stock, no storage location, batch not assigned, system would give error and it would not allow you to post the backflush.
If there are no changes in the material master for REM profile assignment then the assigned REM profile itself must have been changed in configuration in the path mentioned by fellow forum member. Please check and for "Error correction for backflushing" section definations.
Regards,
Prasobh

REM profile for finished material and its raw material

Dear Experts
My question is ,for a repetitive manufacturing scenario
1) We are maintaining REM profile finished material . Is it necessary to maintain REM profile for its raw materials ?
2)For raw materials do we need to create the seperate REM profile which is having seperate stock determination rule ?
Regards ,
Vishwas.K

Dear Vishwas,
1.REM profile assignment is required only for the materials for which production confirmation will be made through T code MFBF or
MF42N.
2.For stock determination rule check in control data 2 in the REM profile itself. This setting is linked to the REM profile and further to
the goods movements posting for the raw materials.(check this setting in T code OSP2).
Regards
Mangalraj.S

REM profile and reduction period

Dear SAP consultant,
In REM profile setting, what the meaning of Reduction period (days) ? If i set to 30 days, can i backflush plan order earlier than 30 days ahead ?
Rejoice

Dear,
Reduction period at OSP2 we define time for planned orders to be reduced.
If you enter the number of daysas 30 then system is to take into account when reducing the production quantities after 30 days. The period of reduction is calculated by adding the number of days you enter here to the backflush date.
The 30 days will be taken as working days from the factory calendar and these days will be added to the backflushing date (means 30 working days in future).
Hope clear to you.
Regards,
R.Brahmankar

I have recently updated my CC programs to the latest version and now all of my files wont open by default into their respective programs, only if I open the program and go to file open and open the file from there. How can I fix this?

I have recently updated my CC programs to the latest version (CC2014) and now all of my files wont open by default into their respective programs, only if I open the program and go to file>open and open the file from there. How can I fix this?
I have tried 'Open with' and the version of the program now installed on my computer isn't even suggested as an option and when I browse for it, the file wont open with it anyway

On Windows (don't know about Mac), the latest version will always take over the file association, and become the default for indd files. It's impossible to change it.
But there is a plugin for ID that makes this possible. Never tried it myself.
https://www.rorohiko.com/wordpress/downloads/lightning-brain-soxy/

Clearing of GR/IR Account for initial stock entry into the system

Hi All,
We MM team did some initial stock entry into the system using MVT TYPE 561 in migo transaction. But in the FI, When GR/IR clearing account was checked, these entry's caused by the initial stock entry are not cleared. when tried to clear It gives a message saying this cannot be manually cleared.Do any of you know what should be done in this case?

I have one more Questiion, in my company there is some amount that is not balancing. We feel that is due to the initial stock entry of the Materials is there a way to view what was the value stock on a particular date by particular movement type, we have transaction in MM but that does not give the currency, in the currency column it says $0.00.

Invoice Partner Not Defaulting Into Purchase Order

We have recently upgraded to 6.0 and since go-live we have been having an issue where the invoice partner does not always default into the purchase order at conversion from PR. Can anyone offer assistance?

Hi,
Is there any specific Copy Control Routine or User Exit that copy Partners from a Purchase Order Header to Delivery Header?
Please provide me the Routine Name/Number or User Exit Name.
Thanks,
RV

Currency by default into the conditions types

Hi Experts,
I have the following scenario. The Company where I work carries out purchase orders that requires to maintain two kind of currency for two conditions types. So, I wonder if it's possible to customize the currency by default into the conditions types, so this way the company will be able to create a purchase order by treating different kinds of currencies although the header document shows just one of those.
I'll appreciate any idea about explained above.
Best Regards.
José

HiI,
NARMALLY SYSTEM WIL Lallow to create PO with the document currency of the vendor or the local currency of the plant /materials and with other currency by a curency conversion.
If your intenstion to see that differant conditions in the PO need to have differant currencies , you need to give the conversion in the PO items condition if the header currency is differant from the conditions currency.
You can create the condition record at MEK1 to get defaulted into PO with the currency you want .with proper condition tables.
Regards,

My first try to get Stock Quotes into Numbers...

Ok, I heard alot of people asking over the past year for a way to pull stock prices into Numbers. So heres my first public applescript. I just figured most of this out over the past day.
There is a zip file that contains the template file with the pre-made sheet and table in it. You can then base any additional tables off that data that you wish to. The script looks for a table of a specific name with a table named Stocks. Symbols in column A starting in row 2, and it places the price in column B.
I posted it on the Numberstemplates website:
Grab Stock Price
This is my first attempt at an applescript, if any gurus want to assist and show us a better way of doing it, please let us know so we can all learn.
Thanks alot everyone,
Jason

we found some errors that had to do with interfacing with Safari. Some very nice people on the applescript page got me some answers on how to approach it better. Believe it or not, we made such great changes to the original, that I now consider it to be at v3.5
It is completed as best I can test on my machine, On a dual G5 2.0 with 1.5 Gb ram runs at about 80 symbols per minute (up from ~10/min using safari only). I would love to hear how it works for you. Please leave comments on either this site or the one I posted it on. Any suggestions are greatly appreciated.
I can only test from home, so I do not know how well it works 'out of the box' in other locales than the US. If anyone could let me know, or localize and repost in the main thread at the link above, that would be great!
Thanks alot everyone that helped me get this running so smooth,
Jason

Kanban : Changed REM profile regarding generation of postprocessing records

Dear Gurus,
I am trying make a kanban container from empty to full and i am getting the below error message.
Changed REM profile regarding generation of postprocessing records - RM887
I have not change the production version or rem profile. This error is when i scan them to FULL so I have not used "Execute correction in dialog box mode" option in OSP2. NO COGI errors...
Any advice is highly appreciated.
Regards,
Senthil
Edited by: Senthilkumaran Virudhanayagam on Feb 24, 2010 3:54 AM
Edited by: Senthilkumaran Virudhanayagam on Feb 24, 2010 3:55 AM

Dear Senthilkumaran,
Was there any changes made in the REM profile in OSP2 related to creating individual post processing records or cumulated,if not
was the REM profile changed in the material master?
Can you please check this and reply?
Regards
Mangalraj.S

RM887- change rem profile regarding generation of postprocessing records.

Hi,
While doing MFBF (GR GI) I am getting error "change rem profile regarding generation of postprocessing records" Message No RM887. I am using same REM profile for many other materials for which MFBF is working fine. There are no COGI errors pendings for the materials for which I am gettinh error. But in MF47 there are some pending records which I neither can change nor delete, I am geting same message as in MFBF in MF47. So I have two issues here 1) How to adress error in MFBF. 2) Why records are seen in MF47 and not in COGI?
Thanks
Suresh.

Dear,
Please refer the OSS notes 383141,202654, 885798.
In OSP2 Transaction, check whether the REM Profile having the Tick for "Create Cumulated post processing records".
If this is not there, and allowing the entries to go to COGI with Execute Correction in dialogue mode "Optional" will be a problem
Please try and come back.
Regards,
R.Brahmankar

Stock overview using navigation profile in MD04

Hi,
after excuting MD04 when i using the navigation profile for the first time to view the the stock , its show all the stock batches. In between when i view the any one of the batch in MSC3n and while again excuting the MD04 and viewing stock views in navigation profile, its show the last viewed batch stock only.

thanks for your input.
i checked the same it copy the last batch on the MMBE. If there is any option to remove the last batch entry in mmbe.
regards,
Ramanathan
Edited by: Ramanathan.KS on Feb 10, 2012 12:20 PM

REM profile Product Type - Cost Collector Order Type

Hi all,
I am trying to create a Repetitive Manufacturing Profile, at that time standard Production Type PKMN is automatically arriving from table V_T437S_GES.
and I would like to assign the cost collector order type (self defined) to the REM profile which I am going to create.
where I need to assign the cost collector order type for production type "PKMN" while creating REM profile.
If I copy the exisiting REM profile and I am able to get the cost collector order type that I am able to see in TABLE : T437S (Repetitive Manufacturing Profile Table). If I create the REM profile newly, I am unable to get the cost collector order type in the table T437S.
So please guide to the self defined cost collector order type for newly creating REM profile.
Thanks in Advance

Madhan,
Order type "PKMN", is internally defined by SAP. Forr all cost accounting purpose, we would be using standard order type "RM01" when creating a new product cost collector for material. If required you can create your own order type say "ZM02" using transaction KOT2, please remmember you need to create with order category "05"- Product Cost Collectors.
This new Order type can be used when we are creating product cost collectors for a material.
I really dont find a reason why a new Order type is required to be created. Can you explain why?
Regards,
Prasobh

HT1727 how do i get my iTunes library from my old computer to my new one? My old computer died and i got a new one. I installed iTunes to it and signed into my profile but it says i have no music. What do i do to get my library back?

how do i get my iTunes library from my old computer to my new one? My old computer died and i got a new one. I installed iTunes to it and signed into my profile but it says i have no music. What do i do to get my library back?

See Recover your iTunes library from your iPod or iOS device.
tt2

Bloqued Stock Default into REM Profile

Similar Messages

Maybe you are looking for