Blotchy image in Lightroom and Photoshop/difficulty waking from sleep

I am suddenly having problems with my 15" 2.4ghz MacBook Pro. There are two problems actually, the first is that I am not looking at gradient colours when I open an image in Photoshop or view it in Lightroom. The image looks blotchy, almost as if I had set my monitor to 256 colours, when in fact my monitor setting is 1440 x 900 at MILLIONS of colours. I don't have this problem with every image, only those I'm viewing in Lightroom and Photoshop.
The second problem is in waking my Mac from sleep, sometimes it just won't wake up and I have to do a forced shutdown and then re-start.
Does anyone know a fix for either problem?

*A few suggestions:*
Change the energy saving options, to put the display to sleep and the computer to sleep at the same time.
Enable (check mark) put the hard disk to sleep when possible.
Lock the padlock.
Optional: Repair permissions &/or restart.
==============
Check your Energy Saver settings to make sure they are correct.
http://docs.info.apple.com/article.html?artnum=303698 Mac OS X: Why your Mac might not sleep or stay in sleep mode
See Knowledge Base Article http://docs.info.apple.com/article.html?artnum=301733 iMac G5: How to Reset the SMU (iMac G5, the iMac G5 (Ambient Light Sensor), and the iMac G5 (iSight)).
Check to determine if your computer qualifies for The 20-inch iMac G5 Repair Extension Program for Power Supply Issues (Rev B)
**WARNING: DUE TO SECURITY REASONS, PLEASE DO NOT POST YOUR COMPUTER'S SERIAL NUMBER ON THESE MESSAGE BOARDS.**

Similar Messages

Why am I seeing very dark images in Lightroom and Photoshop?

I've just installed a new monitor - pretty much the same as the old one. CC was working fine on the old monitor but on the new one files opened in both Lightroom and Photoshop are very dark. I also see, briefly, a yellow triangle in the image when it opens. Are there setttings I need to change?

Are you using any sort of screen calibration? If you are, did you disable it before attaching the new monitor?
What operating system are you using?

Monitor Blanks in and Out When Waking From Sleep

Since getting my Mac Pro (with Apple installed RAM and NVIDIA GeForce 8800 GT), I've noticed that the screen does not immediately turn on when waking from sleep, as my older Macs did. Rather, it turns on for a split second, goes blank for two seconds, turns on again for a split second, goes off again for a second or more, and then comes on permanently.
This behavior only occurs when waking from sleep; it does not occur when the monitor turns on from the active screen saver.
Is this normal for the MAC Pro with an NVIDIA GeForce 8800 GT? I have a HP w2408h monitor with a DVI to HDMI cable. Everything else works fine, including all video behavior.
Thank you.

Hm. Bluetooth, interesting. Thanks for the idea.
I just opened the lid to see about the BT setting and the display didn't go off-on. The BT is off, I'm pretty sure I did that when setting it up as I don't use BT for anything.
I wasn't suspecting anything was seriously wrong, it's just that quick-on feature was highlighted as a selling point and I was curious about the glitch, if it was a setting I could change, for instance like you've highlighted. Annoying when things don't work as advertised.
And if I show the machine off to colleagues and friends, that will be a bad first impression they will want explained.

Difficulty waking from sleep

I've read on the forums people having problems waking their MacBooks from sleep, but I haven't heard any stories quite like mine:
I put my MacBook to sleep by closing the lid. It goes to sleep because the light on the front pulses as it should. When I come back and wake it by opening the lid, I get the password dialog (I set this because I'm paranoid), I enter it successfully but I just get a black screen with a working mouse pointer.
I discovered I can "fix" this by closing the lid again, waiting a few seconds (presumably enough to let it sleep again), then re-open the lid, re-enter my password, and then it finally awakens properly. The second time around, it sounds like the SuperDrive is waking up because there's a definite mechanical noise.
While this is workable, obviously it's annoying. Has anyone else experienced this, and/or found a better solution?

If you use a screeen saver, even if not, try changing the screen saver that is set for use.

GT70 internet very slow and sluggish when waking from sleep

My GT70 sometimes is very slow and sluggish to respond when it is awoken from sleep mode. Browsers become unresponsive (hyperlinks don't register as links and require multiple clicks to respond) and internet gets very slow. Speedtest.net reports .50-3mb/s when it is usually 24mb/s and above. The hdd also thrashes about and won't calm down for what seems like an eternity.
This only happens when opening the lid after the machine sits idle for several hours. This is fixed by restarting the machine.
Does anyone know why this laptop would be behaving like this? it is very frustrating and makes sleep mode pretty much useless.
cheers,
-deluxxe

Quote from: darkhawk on 22-November-13, 13:17:05
First thing I would do is get CPU-Z and open that after wake-up and seeing if the CPU is running at the speed expected, or if it's stuck at some lower speed.
thanks for the reply. will try that next time it happens.

Desktop Wallpaper Screensaver Bug? [When waking from sleep]

I'm not sure if this topic is in the correct category but it seems to fit.
I have a new 15.4" MacBook Pro with OS 10.6.3. I have multiple images that I want as a wallpaper and so I decided to select "Change picture" in the preferences pane. I also selected "Random order" and chose "When waking from sleep" as the time for the wallpaper to change.
However, if I close my lid, and then re-open it, when the computer wakes up, instead of the wallpaper changing, it changes twice.
Now, this isn't really a problem but it can get annoying sometimes and I was wondering if this problem is due to something I do, rather than the operating system.
Thanks.

I just noticed something, perhaps this will help? There appear to be two kinds of sleep, display sleep and computer sleep. I noticed that if my machine is running (playing music, for instance) and the display goes to sleep, when I use the mouse to wake up the screen the background changes. So maybe when I wake up the machine from computer sleep it changes once for waking from computer sleep, and once more for waking from display sleep?

Printing: Lightroom and Photoshop

Ok...so today I tried to run my first print since getting lightroom. Quick run down on my color management (although I am still learning on this subject as well). My monitor is calibrated with an eye one display. My camera (Canon 300D) is set to AdobeRGB profile. I am running an Epson 2400, Ilford Smooth Pearl paper, with the profile provided from Ilford, and have it set to have the printer determine colors. And I am running Lightroom and Photoshop CS2.
I have been printing with this combonation beautifully for about a year now. I do have one small thing about my setup, even calibrated, my monitor is a little dark, so I must do a small curves adjustment on my final version to get the print to be perfect. I have accepted this (not the newest or best monitor) and just set an action to run before printing.
So, today, I tried to print from Lightroom. The print came out WAY too dark...I mean, my blue sky is a dark purple...odd. So I said, well I need this print, let me move it to photoshop, drop the curve and print from there. Well...the blue came out blue, but the image is still a little dark...I will play with the curve again to see if I can get it right. I don't have a problem with doing this for now, but I am wondering why the images are darker then they used to be, even in photoshop.
Also, can I create actions in Lightroom, something like develop presets that I can run AFTER I am done working on an image that we prep the document for print?
Sorry for the long post...thanks for any help...

So...you're using the canned profile from Ilford...and in Lightroom you've added that via "Other" correct? When you select that profile you are then using Lightroom color management and then you go into the Epson driver under Properties, Mode Custom and then select Off under Color Management, right? You've also selected the correct media that Ilford reccomends with the Pearl paper?
If you hit print from there than that should take care of it. Note however that if you change the page template, it _WILL_ change the print output settings making you update to the profile again.
So far, I get equal output results from Lightroom and Photoshop CS2/3 when using the same profile and printing under Mac or Win. So, if you are _NOT_ getting the same results, your settings are not equal-something somewhere is set incorrectly.

I need to change the storage hard drive for both lightroom and Photoshop from my C drive to F drive

How do I change my storage drive from C to F in both lightroom and photoshop as I am running out of space on my C drive?

Storage Drive ?? Photoshop. What Platform and OS are you running.
I use PC therefore Windows. When I thing about Application like Photoshop I know the are going to be files all over the place. Windows like everything installed on the Boot disk. I gave up the fight many years ago and let windows have it way when application are installed using an installer. However besides the application files you have user files and I break user files down into to categories. Windows User files like applications settings, preferences, cashes, etc and user Data Files, Images, text documents, PDF. Applications like Photoshop also have add-ons an need swap space as well. While all Windows default library reside on the C: drive you can add additional storage to you document, music, picture and video libraries the are not on the c: Most of my user data file are actually on external ESATA drives or USB3 drives. System files, Application Files, Paging, swapping and backup are on internal SSd and Fast Disk drive. Some of the folder that look like they are on C: are actually shortcut links to folders on other drives.

How to make colors looks same in Lightroom and Photoshop?

The colors of JPGs with sRGB colorspace are displayed differently between Lightroom and Photoshop and other image view applications.
I edited RAW images in Lightroom and export them to JPG files with sRGB colorspace, but their colors are eventually different from what I saw in LR.
(I set ProPhoto as the colorspace for my Photoshop.)
Is there anything I can do to solve this problem? Or maybe to reduce the color difference?
What is the best I can do to manage colors for those images that I want to share on the internet?
Thank you !!!

If colours look different between two colour managed applications such as LR and PS then you have either not calibrated your monitor at all or are using a corrupt monitor profile.
If the former you require a calibration device, such as a Spyder (lots of other around). If the second then re calibrate.
In the meantime you can set your monitor to use a colour space such as sRGB as a profile. This is not a solution, it is a temporary fix. Using a colour space as a monitor profile is not colour management, but will at least make the colour appear the same on your monitor.
There are some useful links concerning colour management and LR here you may wish to read.

I am a novice. I have a few thousand iPhotos stored on Dropbox. But now I have a Canon T5i camera and want to get more involved in photography. I want to open a Lightroom and Photoshop account. I have a Windows desktop and an iPad. Will I have any compati

I am a novice. I have a few thousand iPhotos stored on Dropbox. But now I have a Canon T5i camera and want to get more involved in photography. I want to open a Lightroom and Photoshop account. I have a Windows desktop and an iPad. Will I have any compatibility issues with PC and Mac? Can I store my photos in Lightroom and eliminate my Dropbox account? Thanks.

You shouldn't have any compatibility issues. But you don't store images "in" Lightroom. Lightroom simply points to wherever the images are on your system. You might like to watch a few videos that can help you understand how Lightroom works.
Getting Started with Adobe Photoshop Lightroom 5 | Adobe TV

I have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!

I am about to buy the above products for home and a laptop I bought the high res laptop for editing photos and the photos look great on the display but I cannot use photo shop and lightroom
has any body had this problem and is there a simple fix that I have missed
taking the res down in the control panel reduces the res but does not effect the programme
by the way the dell xps is great
dave

Thanks for the info I know that there were problems with the high res
I am using the latest photoshop and bridge from the cloud but only using the trial copy at the
moment
I will look closer and try to scale it to a suitable level
thanks dave
Original message----
From : [email protected]
Date : 06/02/2015 - 00:39 (GMTST)
To : [email protected]
Subject : i have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!
    i have dell xps it runs at 3840 x 2167 and bridge lightroom and photoshop are unusable as the type is so small if win is re scaled to a low res the products still use full res and you canot see text can you help!
    created by gener7 in Photoshop General Discussion - View the full discussion
There is that pitfall in buying HiDpi laptops for Windows.
Only Photoshop CC 2014 has the option to scale the UI 200% in order to make it usable on these hires screens.
CC and earlier does not have this and Adobe would have to retrofit them. Not likely with older products.
Gene
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7167666#7167666 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7167666#7167666
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

I need a serial Number for lightroom and photoshop. Its working on the imac already, I am paying. Now want to install on the mac book. There are no adobe-mails...

I need a serial Number for lightroom and photoshop. Its working on the imac already, I am paying. Now want to install on the mac book. There are no adobe-mails...

dear jeff,
its both the newest versions downloaded at adobe.com <http://adobe.com/>
after testing i signed the contracted and i am paying
the mail with the serial number got lost
both apps are working on my imac
now the should be installed on my book
there are no informations in creative cloud about my problem.
Am 04.03.2015 um 22:41 schrieb Jeff A Wright <[email protected]>:
I need a serial Number for lightroom and photoshop. Its working on the imac already, I am paying. Now want to install on the mac book. There are no adobe-mails...
created by Jeff A Wright <https://forums.adobe.com/people/JeffAWright> in Creative Cloud Download & Install - View the full discussion <https://forums.adobe.com/message/7252990#7252990>
Berndh38291059 what version of Photoshop and Lightroom are you installing? Do you receive any specific error messages?
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7252990#7252990 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7252990#7252990
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Creative Cloud Download & Install by email <mailto:[email protected]dobe-v7.hosted.jivesoftwa re.com> or at Adobe Community <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14&container=47 86>
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624 <https://forums.adobe.com/thread/1516624>.
Bernd Hoff
Fotoproduktion
Stoffeler Str. 26
D- 40227 Düsseldorf
+49 211 37 05 14
+49 171 642 42 07
[email protected]
berndhoff.de

Camera Raw 8 the same cropping choices as are in Lightroom and Photoshop?

Seriously, how hard would it be to give Camera Raw 8 the same cropping choices as are in Lightroom and Photoshop (i.e., Fibonacci, Triangle, Diagonal, etc.)? This disparity in features is inexcusable and embarrassing. Surely the teams communicate?

I don't have CC nor LR. Just be sure you are comparing apples to apples
That is a nice statement for a Windows guy…
I never use crop in ACR because I like this feature more in PS itself. Also the inability to save crop presets in ACR makes it very limited. The ACR engine for PS and LR are the same, the body differs.
Thanks to hard yelling people we now have about the same crop tool in PS as in LR. Although I still don't like it in PS, after having used it years and years I now have to move the image instead of the crop.
Sadly the ability to rotate crop and having adjust it automatically to the borders is a very nice option. If it wasn't for this I would stay with the old classic mode.
But the OP is right, many features in different Adobe Products have somewhat the same result but sometimes very different approaches, options and tools.
Until the Adobe HQ is going to settle in Utopia we might be better off trying to learn living with it

Color spaces in Lightroom and Photoshop

I read that Lightroom uses the large ProPhoto color Space and then again, that it's gamma curve ist close to sRGB. So what is my color space when working in Lightroom? ProPhoto, or sRGb, or something else?
And what kind of a color management workflow between Photoshop and Lightroom do you advocate? Using ProphotoRGB or sRGB as color work space in Photoshop? I used to work in AdobeRGB in Photoshop. Has this to be changed to gain maximum color consistency?
Thanks again for any help!
Johann M Ginther

Hey Claude,
if it did not have an attached profile it is almost definitely in sRGB or, more rarely, Apple RGB. Lightroom always assumes sRGB for untagged files which is typically a safe bet. Photoshop generally uses the working space for untagged images. Since you had adobeRGB there, you should get a more saturated image in photoshop then in Lightroom. The same data is simply interpreted in a different color space leading to different colors. This has nothing to do with the monitor profile therefore and my initial hunch was wrong. So for untagged images in photoshop, you should usually assign sRGB to them instead of working space.
>As for calibration hardware we do use them here so I will use it but since the Mac was brand new out the box I assumed that it was ok...
Unfortunately, in general the canned calibration is not very good on Macs. I find very large differences between the shipped profile and a profile generated by a calibrator. Also, Apple ships profiles that set your display's gamma to 1.8 instead of the standard 2.2. This leads to many images in webbrowsers being too low contrast. Even Apple suggests recalibrating your screen at 2.2 if you do digital photography work (it's in their Aperture help files). In this case though the difference between Lightroom and Photoshop had nothing to do with the monitor profile but was related to photoshop interpreting untagged files in its working space instead of the more likely sRGB space.

COLOR DISPLAY IN LIGHTROOM AND PHOTOSHOP

Hi I am a new user of Lightroom but a longtime user of Photoshop.
My question is this:
When opening the exact same TIFF file in Lightroom and Photoshop CS3 is there a way to configure Lightroom so that it will display the image exactly like Photoshop ? I mean the difference that I get is not dramatic but if there is a way to make it perfect I would love to know.
Thanks,
Claude from Montreal

Hey Claude,
if it did not have an attached profile it is almost definitely in sRGB or, more rarely, Apple RGB. Lightroom always assumes sRGB for untagged files which is typically a safe bet. Photoshop generally uses the working space for untagged images. Since you had adobeRGB there, you should get a more saturated image in photoshop then in Lightroom. The same data is simply interpreted in a different color space leading to different colors. This has nothing to do with the monitor profile therefore and my initial hunch was wrong. So for untagged images in photoshop, you should usually assign sRGB to them instead of working space.
>As for calibration hardware we do use them here so I will use it but since the Mac was brand new out the box I assumed that it was ok...
Unfortunately, in general the canned calibration is not very good on Macs. I find very large differences between the shipped profile and a profile generated by a calibrator. Also, Apple ships profiles that set your display's gamma to 1.8 instead of the standard 2.2. This leads to many images in webbrowsers being too low contrast. Even Apple suggests recalibrating your screen at 2.2 if you do digital photography work (it's in their Aperture help files). In this case though the difference between Lightroom and Photoshop had nothing to do with the monitor profile but was related to photoshop interpreting untagged files in its working space instead of the more likely sRGB space.

Blotchy image in Lightroom and Photoshop/difficulty waking from sleep

Similar Messages

Maybe you are looking for