Blu error screen! STOP 0x000000F4​. Need help.

Hi.
i have this laptop with win 7 installed. it worked fine,until i did one o cleaning procceses with TuneUp2009.
( i do it regulary every month and it was ok ) but now after tuneup2009 restarted my pc, on start up he show this stop error. STOP  0x000000F4.
 I tried safe mode but is cannot acces,the same error code. i have tried to format my pc with a disc win7 but still no succes,
it seems the pc doesnt do boot from cd room ( i have changed boot order on bios setup).
And now need help
Thank u.

That is still not the complete model but gives me some idea of the age of the system. Can you get into the BIOS [F10] as you power on to try a hard drive test? The hard drive can get so corrupt it will affect all attempts at booting. I might also try removing the hard drive and see if it will then boot from CD or usb flash drive.
Link to Your Drive Service Manual
See Page 17 of the above for hard drive removal instructions.

Similar Messages

  • Windows XP, will not load past blue error screen

    Hi, been wondering for a while if anyone can help me...
    My xp system will not load past the blue error screen which appears after the computer has shut down suddenly or improperly.
    Regardless of what actions you choose to take (safe mode, most recent settings...etc) the system simply goes past the blue screen, onto the windows logo loading page, where the loading bar moves for around 10 seconds, before returning back to the blue loading page.
    So far I have tried leaving the computer for as long as a month unused whilst I was abroad, removing the battery for various amounts of time, and leaving the computer running for as long as a day.
    In the absence of a recovery disk, I have no idea how to get it back to form, and would welcome any hints or suggests, bearing in mind I am no computing genius (If you had'nt guessed). Preferably, without loosing my irreplacable pictures and videos stored on the hard drive, however that is only preferably,
    Thanks, Jay

    Hi Jay,
    i know what it's like to not able to boot even into safe mode command prompt.
    In your case I would do either of below:
    Download a bootable CD ISO called "HDD Regenerator" or [Hiren's BootCD|www.hiren.info/pages/bootcd] which includes many other great tools. Burn the ISO image onto CDR.
    1. Use the HDD Regenerator to boot the PC and use it to scan the whole HardDrive from 0, it will scan and fix all the bad sectors which may cause Windows failing to boot as systems files are corrupted. You will be suprise how great this tool can fix bad sector HDs.
    2. If above does not work, the the Hiren's BootCD to boot the PC, navigate to Symantec Norton Ghost or Acronis True Image to Clone you hard drive, you can use USB external harddrives.
    Then you can rebuild the PC with second partition large enough to store the HardDisk-IMAGE, use Ghost Explorer/etc to restore your personal files.
    I have been dealing with lots of this issues as well. Let me know if you need more help.
    Good luck!
    Patrick

  • After installing itunes and restarting computer, blue error screen comes up

    After I installed itunes 9 and restarting my computer a blue error screen came up. I had to restart my computer in safe mode and restore. Now itunes will not work. I have tried uninstalling and reinstalling various itunes, ipod, apple...etc programs and i get the blue error message again. HELP!

    What version of iTunes is installed in the Apple default location ..... /Applications/iTunes ???
    Drag the iTunes icon in the Dock to the Desktop and release; it will be deleted with a poof! Don't worry it's only an alias.
    In your Home Page ~/Library/Preferences/ ......... drag to the Trash and delete:
    com.apple.iTunes.plist and com.apple.iTunesHelper.plist
    (don't worry ... new ones will be created upon relaunch of iTunes .... +see below+)
    Using: /Applications/Utilities/Disk Utility/Repair Permissions
    RESTART the computer
    Within the Applicatons folder: double-click the iTunes icon ... if the launch is successful, drag a copy of the iTunes icon to the Dock ... release ... you will now have a current alias in the Dock.
    P.S. *Do Not* have the iPod connected to the computer during this process!
    DIXIE

  • Help IP restore error 21 (DFU ) running DFU  and error 1600. I need help

    I restore error 21 ( DFU ) >>> running DFU and error 1600. >>> I need help ?

    ip 4, 32g is me. I running FW up ios 6.0 >> error 21 ( DFU ) >>  mode DFU  >>>> error 1600 ( recovery mode )

  • Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!

    Hello, I have a problem on my iPhone every second turn on and off I mean it shows the apple and off and again shows the apple icon and off and tried to Restore and it hangs on my iPhone and then waits Error 3004 Please I need help please!

    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200.
    These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    I would guess your iphone has been hacked ( jailbroken ) ring any bells ?

  • Recent wipe of Mac HD.     Reinstall won't allow CS5 .  Quote error 213.5. Need Help

    I recently had my Mac software reinstalled but Adobe Photoshop will not reinstall siting error 213.5.  Need help.

    Hi Nicintime101,
    Please go through the forum link below and  check.
    https://forums.adobe.com/thread/1256895?tstart=0
    Regards,
    Anand

  • Ipod nano 6th gen touch screen stopped working please help

    Everything on the ipod nano 6th gen is working except the touch screen and once it goes to sleep i have to hold the sleep button and the volume down button to turn it back on. I went into the volume -, sleep, volume + menu and went through the tests and in the touch panel error check section it says i have IC error reported: 0xFFFFFFFF. Please help as i have reset and restored and update itunes etc. Do i need to send it in to apple? The touch screen was working at one stage and then i disconected from the computer while it said eject first (this is when the touch screen stopped working) and put the ipod on a different computer. The first computer was windows 7 which i used just to charge it a little and the second one im using is windows vista.

    I have had the same problem and changed three Nano's. Each time the fault is diagnosed by Apple as "water damage".
    If you take your Nano to one of their maintenance centres they will look into either the headphone socket or the power dock and and tell you that you have infringed the warranty by somehow getting the thing wet.
    Basically is a poorly designed piece of kit whereas a simple shuffle is way more robust.
    I have given up with my Nano and am now using an old model

  • Blue boxes with question marks, Need help

    In safari i am constantly getting blue boxes with question marks in them, replacing images.
    These boxes are showing up on tumblr, forums, facebook and other places.
    I need help fixing it please.

    Thoseboxes mens it can't decipher the format, might try
    Perian...
    http://perian.org/
    Perian enables QuickTime application support for additional media:
              •          File formats: AVI, DIVX, FLV, MKV, GVI, VP6, and VFW
              •          Video types: MS-MPEG4 v1 & v2, DivX, 3ivx, H.264, Sorenson H.263, FLV/Sorenson Spark, FSV1, VP6, H263i, VP3, HuffYUV, FFVHuff, MPEG1 & MPEG2 Video, Fraps, Snow, NuppelVideo, Techsmith Screen Capture, DosBox Capture
              •          Audio types: Windows Media Audio v1 & v2, Flash ADPCM, Xiph Vorbis (in Matroska), and MPEG Layer I & II Audio, True Audio, DTS Coherent Acoustics, Nellymoser ASAO
              •          AVI support for AAC, AC3 Audio, H.264, MPEG4, VBR MP3 and more
              •          Subtitle support for SSA/***, SRT, SAMI
    Never heard of those sites though, so no idea what they use.

  • Installation of Photoshop update 13.1.2 for creative cloud fails with error code U44M1P7 I need help

    I need help installing update 13.1.2 for Photoshop creative cloud, installation fails with error code: U44M1P7. Could someone please help?

    Sorry to bother you.
    I could find the answer after searching previous posts about this language problem.
    Had to change my language in AAM profile and then download PS CS6 again ( english version ).
    Then open the actual Photoshop and in preferences > interface you can besides the Dutch also option for English.
    restart application and Voila.
    Greetz, Jeroen

  • Windows phone error code 80188301,. please need help

    i am getting an error while updating my windows phone.  windows phone error code 80188301,.
    please need help

    Hi,
    If issue persists after using the solutions provided by Aman Raizada, then I would suggest you ask the question in Windows Phone support forum:
    http://www.windowsphone.com/en-US/how-to/wp-support
    Regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • Error encountered in DocumentInstance, need help

    Post Author: usaitconsultant
    CA Forum: JAVA
    Hi Ted or to anyone encountered this, I Need help! Im trying to open a deski document to pass parameter and set report format then schedue to run. In this line:  DocumentInstance documentInstance = reportEngine.openDocument(infoObject.getID()); Im encountering this error message:Entering getRASConnection()ExceptionError Message: No server was available to process the request. Please try again later. (Error: RFC 00101) Any idea? Though, RAS  server is running. I hope you can help me on this.Thank you. 

    Post Author: usaitconsultant
    CA Forum: JAVA
    Hi Ted,I tried to switch to other BO XI server which infoView is working with pass parameter using my user ID. But when I tried to run my application. The same error I encountered. Though, the pdf was created but with no parameters so no records was displayed in the pdf except for header,footer, and other static data.  See error below, Im just wondering which server/configuration should I checked if down/disable? Please advise. "Unable to find servers in CMS <Server path> and cluster @<Server path>
    with kind dpscacheFullClient and extra criteria null. All such servers
    could be down or disabled by the administrator. &#91;RASLIB9006&#93;"Please advise, I hope you can help me again here. Thank you.  Stacktrace:documentInstance = reportEngine.openDocument(infoObject.getID())Entering getRASConnection()com.businessobjects.rebean.wi.ServerException: No server was available to process the request. Please try again later. (Error: RFC 00101)    at com.businessobjects.rebean.fc.internal.ras21.XMLviaRAS21Encode.newSession(XMLviaRAS21Encode.java:972)    at com.businessobjects.rebean.fc.internal.ras21.RAS21ReportEngineComAdapter.openDocument(RAS21ReportEngineComAdapter.java:87)    at com.businessobjects.rebean.fc.internal.ReportEngineImpl.openDocument(ReportEngineImpl.java:249)    at edu.uillinois.boxir2.BOXIR2ReportEngine.testRunReportWithParameters(BOXIR2ReportEngine.java:718)    at edu.uillinois.boxir2.BOXIR2ReportEngine.main(BOXIR2ReportEngine.java:72)Exception encountered during setting parameter values. @Wed Apr 30 14:47:21 CDT 2008Error Message: No server was available to process the request. Please try again later. (Error: RFC 00101)Caused by: ErrorFailureUnable to find servers in CMS <Server path> and cluster @<Server path> with kind dpscacheFullClient and extra criteria null. All such servers could be down or disabled by the administrator. &#91;RASLIB9006&#93;    at com.crystaldecisions.sdk.occa.ras21.RASConnection.a(Unknown Source)    at com.crystaldecisions.sdk.occa.ras21.RASConnection.<init>(Unknown Source)    at com.crystaldecisions.sdk.occa.ras21.RASConnectionFactory.a(Unknown Source)    at com.crystaldecisions.sdk.occa.ras21.RASConnectionFactory.getRASConnectionObjectId(Unknown Source)    at com.businessobjects.rebean.fc.internal.ras21.XMLviaRAS21Encode.newSession(XMLviaRAS21Encode.java:958)    ... 4 moreCaused by: com.crystaldecisions.enterprise.ocaframework.OCAFrameworkException$AllServersDown: Unable to find servers in CMS <Server path> and cluster @<Server path> with kind dpscacheFullClient and extra criteria null. All such servers could be down or disabled by the administrator.    at com.crystaldecisions.enterprise.ocaframework.aa.int(Unknown Source)    at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.int(Unknown Source)    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)    at com.crystaldecisions.enterprise.ocaframework.o.try(Unknown Source)    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)    at com.crystaldecisions.enterprise.ocaframework.o.a(Unknown Source)    at com.crystaldecisions.enterprise.ocaframework.p.a(Unknown Source)    at com.crystaldecisions.enterprise.ocaframework.ServiceMgr.getManagedService(Unknown Source)    ... 9 more  

  • I can't activate my desktop account. Error: E_AUTH_NOT_READY. Please, need help!

    I instaled my desktop Adobe Digital Edition, but I'm failing in activate it with my Adobe Id. The error code is:   E_AUTH_NOT_READY
    Please, need help!

    For this problem, you need to deauthorize and authorize ADE again.
    Launch ADE
    Help -> Erase authorization.
    ADE will be deauhorized.
    Now again AUTHORIZE ADE
    Help-> authorize computer.
    Error will be fixed !!

  • ITunes Error Message. Still need help. Please.

    I still haven't been able to use my ITunes for about two months. I need help to fix the problem. Here's what it says when I try to start ITunes:
    Microsoft Visual C+ + runtime library
    Runtime Error!
    Program: C:\program files\itunes\itunes.exe
    This application has requested to terminate in an unusual way. Please contact the application’s support team for more information.
    If anyone can help me with this I would greatly, greatly appreciate it. Thanks.
      Windows XP  

    Have you tried un-installing iTunes, downloading the program again from Apple, and re-installing?
    It's always worth a try, as it should help you clear off anything causing the problem and start again.

  • Sony vaio SVF14N16SGS TOUCH screen stop working suddenly help me to fix this

    hi alli buy sony vaio SVF14N16SGS and calibrate a touch screen i working with laptop but approximately befor 20 minute laptop touch screen stop working suddenly!!!!!!!!!!!!!i am very disapointment from sony Corporation for this bull******e bug please help me to fix iti appreciate it

     
    Hi Jimmy_N, 
    Thank you for considering Sony Community! 
    We're sorry to hear this issue. Please follow the troubleshooting steps here to isolate the issue: 
    Power cycle - Remove the battery and all peripherals -> press and hold the power button for 5 seconds OR, if the battery is not removable, remove all peripherals-> look for a battery off button on the bottom of the laptop -> push the button for 5 seconds
    Reinstall driver - Go to Device manager -> Human Interface Devices -> right click and select Uninstall (DO NOT DELETE). Restart the computer. The driver will be reinstalled.  
    Reset BIOS - While the unit is restarting, tap the F2 key repeatedly. Once in BIOS go to Exit tab -> Get Default Values -> Save the changes and Exit. 
    Update drivers from Sony's support website or from where you purchased the laptop. 
    Your Vaio SVF14N16SGS is not a U.S. model. We do not have the drivers and software that support your computer. For further assistance regarding your concern, please contact the Sony offices/Sony representative offices nearest to your place of residence in Asia Pacific region http://www.sony-asia.com/countryselector.html?hpid=countryselector:AsiaPacific. Due to proximity, they are in a better position to respond to your questions or concerns.
    Hope these help. 
    Thanks,
    Vincent 
    If my post answers your question, please mark it as "Accept as Solution"
     

  • Error restoring row currency - Need Help

    Hi All,
    Can anyone explain me how can I control the row currency???????
    this is my situation:
    when I navigate from page1 (with one read-only table - tableEmployees) to page2 (with a read-only table - tableSelectEmployees, with this columns: ps, eps, obs, obs2, where ps, eps and obs are the primary keys), selecting the "create" button, I need to insert a new row in tableSelectEmployees (page2) with this values (ps=2, eps=2, obs=null, obs2=null). -----> Until here everything works Fine :)
    The Big problem is when I need to navigate from page2 to page3 (with a read-only table - tableAddEmployees with this columns: DOM_ID, id, meaning, where Id is the primary key). The tableAddEmployees has a Query like this:
    SELECT *
    FROM tableAddEmployees
    WHERE NVL(tableAddEmployees.DOM_ID,0) = NVL(:1, 0)
    AND tableAddEmployees.ID NOT IN (
    SELECT obs
    FROM tableSelectEmployees
    WHERE Ps= :2
    AND Eps = :3
    AND NVL(obs, 0) = NVL(:4, 0))
    When I select the new row created (Ps=2, Eps=2, null, null) in page 2 and go to page3 I get this error messages from the log window:
    12:17:20 DEBUG (JhsActionServlet) -Request class: com.evermind.server.http.EvermindHttpServletRequest
    12:17:20 DEBUG (JhsActionServlet) -Request URI: /App_S2-ViewController-context-root/S2PopUpObstaculos.do
    12:17:20 DEBUG (JhsActionServlet) -Request Character Encoding: windows-1252
    12:17:20 DEBUG (JhsActionServlet) -Parameter searchText:
    12:17:20 DEBUG (JhsActionServlet) -Parameter event_Rollback:
    12:17:20 DEBUG (JhsActionServlet) -Parameter event:
    12:17:20 DEBUG (JhsActionServlet) -Parameter partial:
    12:17:20 DEBUG (JhsActionServlet) -Parameter source:
    12:17:20 DEBUG (JhsActionServlet) -Parameter eventValue:
    12:17:20 DEBUG (JhsActionServlet) -Parameter rowKeyStr:
    12:17:20 DEBUG (JhsActionServlet) -Parameter partialTargets:
    12:17:20 DEBUG (JhsDataAction) -Executing action /S2PopUpObstaculos
    12:17:20 DEBUG (JhsDataAction) -lastIssuedPageTimeStamp set to: 1156245440919
    12:17:20 DEBUG (JhsDataAction) -Found existing searchBean for S2AltaSociais2UIModel
    12:17:20 DEBUG (JhsDataAction) -Stored searchBean for S2AltaSociais2UIModel on request
    12:17:20 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 0 has changed: old value=0 ,new value=
    12:17:20 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 1 has changed: old value=0 ,new value=2
    12:17:20 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 2 has changed: old value=0 ,new value=2
    12:17:20 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 3 has changed: old value=0 ,new value=
    12:17:20 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: executing query, bind parameter values have changed
    12:17:20 DEBUG (JhsDataAction) -executing onRollback
    12:17:20 DEBUG (JhsDataAction) -executing Rollback ActionBinding
    12:17:21 DEBUG (JhsDataAction) -Restoring row currencies
    12:17:21 ERROR (JhsDataAction) -Error restoring row currency for S2ObstaculosLevel1Iterator: JBO-25020: View row of key oracle.jbo.Key[2 2 null ] not found in S2ObstaculosLevel1Iterator.
    12:17:21 ERROR (JhsDataAction) -Error restoring row currency for S2ObstaculosLevel1Iterator: JBO-25020: View row of key oracle.jbo.Key[2 2 null ] not found in S2ObstaculosLevel1Iterator.
    12:17:21 ERROR (JhsDataAction) -Error restoring row currency for S2ObstaculosAssoc1Iterator: JBO-25020: View row of key oracle.jbo.Key[2 2 null ] not found in S2ObstaculosAssoc1Iterator.
    12:17:21 ERROR (JhsDataAction) -Error restoring row currency for S2ObstaculosLevel1Iterator: JBO-25020: View row of key oracle.jbo.Key[2 2 null ] not found in S2ObstaculosLevel1Iterator.
    12:17:21 ERROR (JhsDataAction) -Error restoring row currency for S2ObstaculosLevel1Iterator: JBO-25020: View row of key oracle.jbo.Key[2 2 null ] not found in S2ObstaculosLevel1Iterator.
    12:17:21 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 0 has changed: old value= ,new value=278263
    12:17:21 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 3 has changed: old value= ,new value=278263
    12:17:21 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: executing query, bind parameter values have changed
    12:17:21 DEBUG (JhsDataAction) -Storing table binding factory under key jhsTableBindings on request
    12:17:21 DEBUG (JhsDataAction) -Forward set by parameter property returned: /WEB-INF/page/S2PopUpObstaculos.uix
    --->If I want this null values why is JDeveloper changing the row currency?
    When I select one row from page2 with values like this (2, 2, 278264, null) I get the correct response:
    12:19:41 DEBUG (JhsActionServlet) -Request class: com.evermind.server.http.EvermindHttpServletRequest
    12:19:41 DEBUG (JhsActionServlet) -Request URI: /App_S2-ViewController-context-root/S2PopUpObstaculos.do
    12:19:41 DEBUG (JhsActionServlet) -Request Character Encoding: windows-1252
    12:19:41 DEBUG (JhsActionServlet) -Parameter searchText:
    12:19:41 DEBUG (JhsActionServlet) -Parameter event_Rollback:
    12:19:41 DEBUG (JhsActionServlet) -Parameter event:
    12:19:41 DEBUG (JhsActionServlet) -Parameter partial:
    12:19:41 DEBUG (JhsActionServlet) -Parameter source:
    12:19:41 DEBUG (JhsActionServlet) -Parameter eventValue:
    12:19:41 DEBUG (JhsActionServlet) -Parameter rowKeyStr:
    12:19:41 DEBUG (JhsActionServlet) -Parameter partialTargets:
    12:19:41 DEBUG (JhsDataAction) -Executing action /S2PopUpObstaculos
    12:19:41 DEBUG (JhsDataAction) -lastIssuedPageTimeStamp set to: 1156245581741
    12:19:41 DEBUG (JhsDataAction) -Found existing searchBean for S2AltaSociais2UIModel
    12:19:41 DEBUG (JhsDataAction) -Stored searchBean for S2AltaSociais2UIModel on request
    12:19:41 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 0 has changed: old value=0 ,new value=278264
    12:19:41 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 1 has changed: old value=0 ,new value=2
    12:19:41 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 2 has changed: old value=0 ,new value=2
    12:19:41 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: value of bind param 3 has changed: old value=0 ,new value=278264
    12:19:41 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: executing query, bind parameter values have changed
    12:19:41 DEBUG (JhsDataAction) -executing onRollback
    12:19:41 DEBUG (JhsDataAction) -executing Rollback ActionBinding
    12:19:41 DEBUG (JhsDataAction) -Restoring row currencies
    12:19:42 DEBUG (JhsDataAction) -ViewObject S2DominiosLevel1: bind parameter values have not changed
    12:19:42 DEBUG (JhsDataAction) -Storing table binding factory under key jhsTableBindings on request
    12:19:42 DEBUG (JhsDataAction) -Forward set by parameter property returned: /WEB-INF/page/S2PopUpObstaculos.uix
    Can anyone help me with this problem, please?
    What can I do to solve this currency problem?
    Please, I really need help on this!!!
    I'm using JDeveloper10.1.2, struts, uix pages.
    Thanks,
    Atena

    Can anyone give some help here?

Maybe you are looking for

  • Error when starting Adobe Form

    I have an Adobe Form which works Ok in the development SAP Portal, but that, when I log in the production portal gives the following error: Error when reinitializing the form (I guess, it's Error al reinicializar el formulario, in Spanish) I think ma

  • Logic Pro loops disappear when I re-index?

    I'm trying to delete some of the loops in logic to save some space on my SSD as I know I will never touch some of then. However I located them in finder and moved them to the trash, but when I try and re-index my loops library, I enter my password an

  • Do not consider the stock onhand during SNP.

    Hi APO specialists. I'd like to run SNP plan that do not consider the stock onhand. Material A is purchase item. and the forecast of material A has 400 qty. and stock onhand is 200 qty. But I want to make the purchase request as 400 qty. How to ? Any

  • Diferences between Business Delegate and Session Facade

    Hi, I've been programming with java for a long time now, but recently decided to formally studing the J2EE patterns. By now I have the intuition of many of them but in paper looks a little confusing. Let me ask you what is a clear diference between B

  • [solved] Correct time settings in rc.conf

    I'm having weird problems with the time settings (kmail displaying the wrong timeso I was wondering what the correct settings in my rc.conf regarding time should be. My HW-clock is set tu UTC and I'm living in Austria (Central european summertime). L