Blu-Ray and Pal Question - client wants us to make blu-ray

A client of mine wants their event shot in HD and final output as blu-ray.
They also want a third party to be able to watch the video in indonesia which is PAL territory if I'm correct.
- should i assume that a blu ray player in indonesia will play a blu-ray video just fine without the pal / ntsc issues?
- should we make a separate NTSC SD DVD of the video and tell them to buy the third party a NTSC DVD player to ship to indonesia along with a NTSC SD version of the video?
Any advice or suggestions?
thanks

There is no NTSC or PAL in Blu ray. European and Asian players play all BD resolutions and frame rates

Similar Messages

HDV to Blu-Ray and DVD questions!

So I shot a bunch of footage that I need to turn into a DVD and Blu-Ray. I have some questions regarding these 2 issues.
First of all, I captured all the footage HDV settings 1440 x 1080. I am using Final Cut Pro 5. I am having some issues with the footage trying to multicam edit. It's making me render it out, which takes about 8 hours for 20 minutes.
What is the best way to go from HDV back to DV so I can put it on DVD? Can I export straight from the HDV footage to mpeg2 or is there a different way I should go about it?
My next question is. For Blu-Ray video, how do I export the HDV footage in FCP so I can use it in Adobe Encore? Any help with these questions would be greatly appreciated. Thank you!

The easiest way to convert HDV to DV is to use the camera or deck to do this Down Convert.
Edit and export to Compressor for DVD.
Multiclip editing is not something I can help you with as I haven't had any success with it.
For Encore you could export as a self contained .mov then import into Encore. You might want to try working with Compressor first.
Good Luck
Z1

Instead of an image i get a box with a blue square and white question mark help?

Lately instead of images coming up I have been getting a blank box which in the center has a smaller blue square with a white question mark inside, does anyone have any suggestions. Using safari version 8.0.3 on mac OX X Yosemite 10.10.2

From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

Only get blue scrren and blinking question mark on startup

I have a Macbook 2.16 Intel Core 2 Duo 2gb 80g combo 10.5.
It froze up while I was on the net and I did a forced shut off with the power button. Now when start it up I only get a very light blue(gray?)desktop with a question mark blinking in an icon of a folder.
I do not have a installation CD as this is a laptop had Apple checked out and reinstalled the OS.
Any advice as to what I need to do to recover the OS would be greatly appreciated.

Each computer comes with its own installation disks. Use those. If you don't have them, Apple will provide replacement disks for the machine at a nominal price—call AppleCare and have the serial number available.
As for the blue screen thing, see the yellow banner at the top of http://discussions.apple.com/category.jspa?categoryID=235 which points to http://support.apple.com/kb/TS1541 and ultimately http://support.apple.com/kb/TS1545
Whether or not this solves your problem is unknown, but the flashing question mark indicates a corrupt OS, most likely a result of the forced shutdown.

Can Final Cut Studio 2 make Blu-Ray DVDs

I have Final Cut Studio 2 on a mac book pro. I am not sure whether this topic belongs in compressor or dvd studio, but does the HD DVD mean it is HD DVD Format or a DVD that is high definition. So, in other words, can I do Blu-Ray also.

DVD Studio Pro 4.2 (in Final Cut Studio 2) has not yet had an update that allows creating and burning a blu-ray project.
You can create a basic HD DVD (yes it is a format) project and burn to a normal Standard Definition (red laser) DVD.
This plays on Mac computers only and certain Toshiba HD DVD set top players.
(see here for the "how to" )
http://discussions.apple.com/thread.jspa?messageID=4436223&#4436223
We're stilll waiting for Apple to update DVD Studio Pro to enable blu-ray support.
So, no, you can't make blu-ray video projects on your MacBook Pro...yet.
You can only burn data discs should you buy a blu-ray burner.
For a closer examination of what's similar, and what's different between the two fomats, have a look here:
http://en.wikipedia.org/wiki/HDDVD#HD_DVD_.2F_Blu-ray_disccomparison

CS4: client wants 800 "different" versions

Hi,
I have designed a ticket for a client, which is almost done.
Now, that client wants me to make 800 different versions of it: each will have number on it, going from 1 to 800.
However, doing this by hand will take enormously much time...
So is there an easy way to do this?
The numbers will be displayed in a font with layerstyle, so it is editable.

Variables might do the trick.
Make a template then use Image<Variables<Define to replace the ticket numbers, etc.
Here's a link to a Layer's magazine video tutorial on the subject:
http://layersmagazine.com/photoshop-variables.html
Here's a link to the CS4 help page:
http://help.adobe.com/en_US/Photoshop/11.0/WSfd1234e1c4b69f30ea53e41001031ab64-7414a.html

TS4006 how do I turn off the "make a sound" feature with find my mac. I think my macbook was stolen and I don't actually want it to make a sound when someone connects. I selected the feature and now I want to turn it off. How can I do it?

How do I turn off the "make a sound" feature with Find My Mac. I think my macbook was stolen and I don't want it to make a sound when it connects. Can turn the feature off somehow?

ica310 wrote:
I've read some forums that say I have to overwrite it with a silent sound file but I do not understand how to do this.
You have to jailbreak your phone to do this, voiding all warranty & support. Just flip the Ring/Silent switch when you send.

Blue screen and spinning wheel at startup

I had permission problems (locked time machine drive) so I did a full time machine restore.
Did the restart after the restore.
Machine won't reboot.
I get 'bong', apple logo on grey screen as per normal.
Then blue screen and spinning wheel for approx 7 seconds
Then blue screen and black pointer for approx 2 seconds
The blue screen spinning wheel / black pointer repeats.
Also can't start up from Snow Leopard DVD.
I get exactly the same scenario.
I have held down the power key at got the tone.
Still won't start.
HELP!!!!!
It's an Imac (white one) 1.8Gig Dual with 1.5 gig of ram.
Running Snow leopard.
I can see my disc over the ethernet; it is still there as it was sharing with my other machine.
Not sure if this helps me at all?
Cheers

Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
If you cannot boot from your installer DVD on the iMac, then you can try connecting to your other computer via Firewire cable and use Target Disk Mode to boot and install from the other computer - Transferring files between two computers using FireWire

I want to burn a blu ray disc from PP CC 2014 and do not have the Encore application. Is there a way to do that?

I want to burn a blu ray disc from PP CC 2014 and do not have the Encore application. Is there a way to do that?

Here's a free non-Adobe solution as well. It's definitely got a steep learning curve compared to Encore, but from my understanding so far, it may also be more capable. (And it's still being developed, unlike Encore which is dead software.)
Easy BD Authoring, Blu-ray Authoring and Reauthoring | DVDLogic Software

Output to Blu-Ray and Audio from Gaming videos.

Just a simple questions, does premiere pro allow output as Blu-Ray. I have a series of home movies, I want to produce as Blue-Ray and all I can find is only DVD publishing.
On another issue, I am trying to create a video of online gaming that I play and the clan I belong to play to promote the clan, I have some footage from Arma 3, War Thunder, however with my Rust game the audio is very slow. How do I correct this, Would the video resolution affect the audio. I use Bandicam to capture my online gaming footage which is outputted as AVI file. This plays well in Windows Media Player, Realplayer, and PowerDirector (Does Blu-Ray 3D). I have been told by quite a few clan members that premiere pro was a good video editing software so I wanted to try and see for myself seeing I have a complete Creative cloud Subscription.
Video informations is as follows:
codec MPEG 1 Resolution: 1912 x1060 @ 30fps
Audio is MPEG -1 Layer 2 48000Hz @192 kbps Monophonic
Codecs are installed.
The audio, almost sound as thought I am speaking in game in slow motions, I have tried to increase the speed, got as far as 500% which is still too slow. I am new Premiere Pro.
It would be greatly appreciated if someone could assist me with this.

Premiere Pro BY ITSELF will not create DVD or BluRay... you may export files for authoring in EncoreCS6, which is a separate download... go to the bottom of page #5 at The PPro/Encore tutorial list http://forums.adobe.com/message/2276578 for more information on using PProCC with EncoreCS6
Capturing gameplay is often problematic... try this Free Open Source software http://camstudio.org/ -use with Lossless Lagarith http://forums.adobe.com/thread/875797

Blu Ray and iMovie

I am about to buy a tremendously overpriced Blu Ray reader/writer from LaCie. While $600 is steep, I've had good luck with their products and top notch quality. However, before I spend the $$$ I want to know if I can create a movie on iMovie and write it to Blu Ray. I don't want to step up to Final Cut if I can avoid it.
I'm not worried about playback as I have a dedicated Blu Ray player attached to my TV. If the disc is written correctly, the player will play it.
Anybody have any information to share about this?
Thanks

Hi Paratrooper82:
Apple currently does NOT support blu ray in Mac OS X. That means you can' burn blu ray disks with any of OS apps or iLife apps. This may change in a future update to Leopard/Tiger.
To burn blu ray, you have to have and use Roxio Toast 9.
I would get at least 1 erasable BD disk to test out you burner, the write once BD-R media is going for $8-17, and that makes for an expensive coaster
"I am about to buy a tremendously overpriced Blu Ray reader/writer from LaCie"
Check this one out:
http://eshop.macsales.com/item/Other%20World%20Computing/MRF8UE5583/
-Robert

I want to watch my blu ray on my ps3 through the imac 27 new generation. how. thank you

I want to watch my blue ray on my ps3 through the iMac 27 new generation.
how can I do that?
thank you

Looks like you plan to use ps as a transport and iMac as an external display? First of all you need Hdmi to Display port converter or cable. The rest should be easy.

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

How do you copy, for example I work with blue prints and I want to copy a section and copy into another new page?

Forgot to add that it would be an adjustment layer with some kind of mask on it already. The mask is uncentered when copy and pasted which throws it off.
I guess the same question would go towards doing the same for an object. How to copy and paste it over to a new doc, keeping its position within the document? is this possible?

Blu ray and surround sound

I just purchased a Sony Bravia kdl-52v4100 and a ps3 to watch blu ray. Now I want to buy a surround sound but watch blu ray at the same time with out buying a blu ray dvd player. Is there any way I can connect my PS3 with the surround sound to play together.

Assuming you don't already have a surround system, and plan to use the PS3 for DVD and Blu-Ray playback:
1) Buy surround system with an optical audio input. Most have this. Since you have a PS3 you don't need one of the ones that has a built-in DVD player. I'm partial to the Yamaha HTIB (Home Theater in a Box) systems.
2) Buy optical audio (TOSLINK) cable
3) Connect TOSLINK cable from PS3 to surround receiver
4) Leave existing video connection between PS3 and TV in place
No need for a separate DVD player, the PS3 handles this.
You will have to change some options of the PS3 to enable the optical audio output. I can't help you here as I don't own a PS3.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Workflow for creating one project that can be burned to both Blu-ray and standard DVD?

Hi,
I have a 20 minute project and I'm creating a simple single menu with a play button. I'd like to create it once and be able to burn both a 1080p Blu-ray and a standard DVD. Is this possible?
Thanks

Hi,
Let me explain how transcoding works for DVD and Blueray.
Encore transcodes the files separately for DVD and Blueray and once the transcode is done and status shows transcoded the options for transcoding are greyed out, this means you have already transcoded the file and you cannot transcode again without reverting to original.
For example you have blueray selected in project settings and you click transcode now from project panel the files will be transcoded for blueray, but after transcoding if for any reason you decide to change the transcode settings and transcode the asset again with different settings you have to revert to original.
But in this case when you want to transcode the assets for DVD you don’t need to revert to original and loose the transcoding done for blueray. You can change the project settings from blueray to DVD after that you will be able to transcode for DVD without losing the transcoded files for blueray.

Blu-Ray and Pal Question - client wants us to make blu-ray

Similar Messages

Maybe you are looking for