Blu-Ray audio does not loop properly on simple menu

I have authored a Blu-Ray disc using CS4 of Encore. Each menu is very simple: No motion elements. I have added a short clip of music to each (about 30 seconds). This is already transcoded AC3 audio (to ensure it matches the audio on the main movie(s)).
When playing back in test mode, the menus play fine. However, on a PS3 (the only BD player I have), it plays a few seconds (up to 10 seconds) of the audio and then loops. The false loop point occurs at different times on each menu.
The loop point on the menus is 0. The audio length is set to 30 seconds in the project and the menu is set to loop forever.
Anyone else come across this?
Thanks

Seems that this is a bug (rather bad one, actually), but there is a work around of sorts.
http://forums.adobe.com/message/2047349#2047349

Similar Messages

Premiere Pro CS6 H264 Blu-ray encoder does not do MBAFF interlace

I have been testing the Premiere Pro CS6 H264 Blu-ray encoder with some HDV video 1440x1080i25 top field first and I have found that it always encodes as PAFF even when the MBAFF box is ticked. I analysed the stream with h264_parse and found that the mb_adaptive_frame_field_flag is set to 0 and that the pic_struct flag alternates between 1 and 2. These indicate that the encoder is using PAFF when the MBAFF flag is ticked.
The CS5 encoder does work as it sets the mb_adaptive_frame_field to 1 and the pic_struct to 3 which is correct for top field first.
There is another problem in that Premier pro does not recognise field order of correctly encoded MBAFF video. It reports tff video as progresive and bff as top top field first.
MBAFF generaly gives higher quality pictures.
Regards Trevor

For obvious reasons I do not like to be constanly connected to the internet with my Video Edting PC.
There are no 'obvious' reasons not to stay connected (if you know what you're doing), and in fact very good reasons to do so (more so if you're a Creative Cloud subscriber).
Having said that, there is a way to get the PDF to come up when you hit F1, instead of the online help. I just don't recall where that setting is.

Blu-Ray Creator does not seem to work- has anyone used with success

I just purchased Blu-Ray Creator from the app store and it will not let me backup a hardcopy Blu-Ray disk onto my hard drive. Has anyone bought it and got it to work?

Hi abhi.p,
Thank you very much for your kind reply.
Yes, it does show the checkbox as checked if I use value="#{true}". However, it is checked permanently, user cannot uncheck it.
That's why I used the bean variable "#{pageFlowScope.fullExpressionEditor.categorySel.selected}".
The variable 'selected' is set to Boolean.TRUE in the bean. But in the UI the checkbox unchecked, strange!!
Regards,
-ab

Pioneer Blue ray burner does not work in a Mavericks.

MY Pioneer Blu Ray burner BRD-RW 206D does not work and I get this message (The disc can’t be used because the disc drive is not supported (error code 0x80020025). I have the last firm ware update in it. It worked fine in Mountain Lion but not in Mavericks.

Hi, everyone
just wanted to report I've been successfully using my Pioneer BDR-208D for a couple of days now with no further problems.
I power-cycled and put to sleep the MacPro a few times, and burned a few DVDs and a couple of BD-RE disks.
So, to summarize my experience:
Pioneer BDR-208DBK in second (lower) bay
Mavericks on Mac Pro (early 2008)
Superdrive in upper bay
Drive not appearing in eject menu button, alt-eject on keyboard
dialog pop-up: "The disc can’t be used because the disc drive is not supported (error code 0x80020025)".
What I did:
Booted back into Lion
Inserted non-blank media in the BD drive (a CD in my case)
Rebooted into Mavericks with the CD still inside the drive
System found the drive and enable eject both on keyboard and menu
Disabled "Put hard disks to sleep..." in Energy Saver prefpane - this is what I believe stopped the seemingly random disappearing of the drive
Hope this helps...

TRUE BLU-RAY AUDIO - X58 Pro-E very important question !

I have a problem.
I want to buy a motherboard with X58 Pro-E and build HTPC HD Audio.
What does this mean "TRUE BLU-RAY AUDIO" ?
There is no HDMI output, only S/PDIF !!!!!
- There is no HD audio bitstream (DTS-HD MA/TrueHD) - no HDMI !!!
- Does not decode HD Audio -> LPCM 7.1 - no HDMI !!!
- That decodes the HD Audio (7.1) to analog?
- If only decodes HD from Blu-Ray Stereo (via. SPDIF)?
What does this mean "TRUE BLU-RAY AUDIO" on MSI motherboard ?
Regards.
HerrMan

>> TRUE BLU-RAY AUDIO <<
• The loss-less content protection technology with full-rate audio enjoyment from Blue-ray Disc
• Support for 24-bit / 192kHz sample rate offers high quality digital decoders and speakers
• support 7.1 channels playback, plus 2 channels of independent stereo sound output (multiple streaming) through the front panel stereo outputs
There is no HDMI because there is no onboard video. The video card you get would need to have HDMI output.
LPCM: Linear Pulse Code Modulation. It is an algorithm used to convert analog audio to digital. It gives pure loss less representation of the original analog audio in digital.
7.1 is the latest in speaker configuration. Mono is one speaker, stereo is two, 5.1 has 5. The problem with 5.1 is it produces angled audio. To get the best out put you have to sit in the center and all speakers have to be placed the right way. 7.1 solves those problems, even if the speakers are not perfectly aligned you still get very good results.
S/PDIF-out JSP1 on MB connects to video card for HDMI sound.
Download the manual >> here << and browse through it.

Flash player does not work properly on Windows 7 32 bits

Hello,
My flash player does not work properly on Windows 7 32 bits with Firfox and IE8 (lasts versions).
My Flash player version : 10.0.45.2, but I tried with version 9 too, with same problems.
I have tried to uninstall, reboot, reinstall several times, ... witch did not worked.
In fact, it works correctly on some sites, like youtube, but not on some others like :
http://www.dailymotion.com/ => black screen instead of videos, right click gives flash context menu
http://www.canalplus.fr/ => videos does not load, right click gives flash context menu
http://www.myspace.com/ => no audio player, right click gives flash context menu
some games in http://www.kongregate.com/ => black screen instead of games, right click gives flash context menu
I have no problem with shockwave in http://www.adobe.com/shockwave/welcome/
No problem too with flash player on http://www.adobe.com/software/flash/about/
But in the Global Privacy Settings panel (http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager02.htm l), I cannot change any settings :
I cannot check boxes,
My changes are not saved.
In most of flash animations, videos, ...,
when I click on parameters, I cannot do anything, even closing.
when I am in full screen mode, the message "press escape to exit...." does not disappear.
Last thing, all those problems was not there when I was on Windows XP, few weeks ago, and appear with my registered Windows 7 premium familly edition, with the same hardware configuration...
Thank you for your help

Hi eidnolb
Thanks for your answer.
This is what I have :
Verify user permissions
I have an administrator account.
I tried (uninstall, install and run) with super-administrator account for same results
Install the most current version.
I am running the latest version (10.0.45.2)
Run the Clean Installer to Fix 3rd Party Flash Player Cleaners
I did not "clean" my computer.
Troubleshoot Pop-up blockers
I have no Pop-up or esle blocker software.
Ensure that Internet utilities do not block Flash Player
I tried (uninstall, install and run) without Avast.
I have windows 7 firewall. I do not know where I can allow ActiveX controls and Flash (SWF) content. I do not see anything relative to ActiveX an Flash in allowed program list.
Fix machine crashes when displaying Flash content
I have no freez or crash.
Using IE, Shockwave Flash Object is Enabled and vs 10.0.45.2
Using FF, I have SWF vs 10.0.45.2 and it is Enabled
I really do not understand !!
Thanks,
Ju'

TestStatnd operatore Interface does not close properly

Hi
I am using LabVIEW 8.2 and TestStand 3.5. I use the default Operatore Interface (full featured) provided by NI. The TestExec.exe does not close properly when I exit the application. Everytime the process is running in windows. I had to use Windows Task Manager to kill the TestExec.exe manaully.
Is there a fix for this?
Thx
Abdulla

Hi,
Do you start any new executions either from within your sequences or from within a step that you are not closing properly?
Regards
Ray Farmer
Regards
Ray Farmer

Subvi does not work properly when called inside a vi

Hello Every body
thanks for your help. i am using a sub vi for sine signal generation. as a vi it works fine. but when i called this subvi inside another VI it gives some problems. for example timer indicator works properly.it reinitializes as well in the sub vi, but in the main VI it does not work properly. means does not count the time.in the sub vi on the fly i can change the values of frequency and amplitude in real time, but when i use as sub vi, it does not reponse as i change the values in the control arrays.similarly pause and continue works properly in the sub vi, but once again in the main VI, it does not work properly.graph indicator also work properly in the sub vi. but here once again it does not work properly in the main VI.the pause resume indicator also does not blink, when it is continue. in the subvi it blinks very well.generally why the sub vi does not work properly inside the VI?i am sending my VI and sub vis.
any tips would be highly appreciated.
thanks
Regards
Attachments:
vi.zip ‏87 KB

I just want to add some more details to Dan's answer. The subVI is acting exactly like you've coded it. The mistake is in understanding how subVIs work. When you call a subVI (or a function in any other language), you pass some parameters to it, the subVI does it's thing and returns values. the subVI does not accept new parameters from the calling VI until it returns to the caller and the caller runs the subVI again. In your case, you have a subVI with a while loop. You have some front panel control wired to the subVI's stop terminal. When first called, the value is false. So the subVI will keep running until the subVI's stop button becomes true but you cannot change it from main until the subVI finishes and returns so the subVI will never stop. As Dan says, the solution is pass references of front panel controls to the subVI and have the subVI monitor those references for changes and to update references to indicators on Main. You subVI does not need any front panel controls or indicators of it's own.

I'm attempting to create a pdf from InDesign and the Illustrator image does not appear properly.

I'm attempting to create a pdf from InDesign and the Illustrator logo does not appear properly. The logo has a light blue color background with a black to white gradiant over it with a multiply designation set at 100%. I flattened the logo in illustrator before importing into InDesign. When the pdf is created, the blue background of the logo drops out and the only thing showing is the graduated screen of black. PLEASE HELP!!!!!!

Thanks for your reply Peter,
I'm on Mac OSX (10.5.8) using Acrobat 7 Professional and Acrobat
Reader 9 to view the pdf. I created it by exporting. Attached is a
screen capture of the letterhead. Since I posted, I sent a test pdf to
my partner's computer eventhough it didn't look right on my system and
she said it looked fine to her. I've restarted my computer and tried
again and still get the same results.
Thanks for your help,
Pat Boullion
Boullion Graphics
281 444-5749
Fax: 281 444-6507
CONFIDENTIALITY NOTICE
The information in this email may be confidential and/or privileged.
This email is intended to be reviewed by only the individual or
organization named above.
If you are not the intended recipient or an authorized representative
of the intended recipient, you are hereby notified that any review,
dissemination or copying of this email and its attachments, if any, or
the information contained herein is prohibited. If you have received
this email in error, please immediately notify the sender by return
email and delete this email from your system.

Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)

Why does not connect properly macpro my motorola bluetooth headphones S10? I get a connection error message and there is no sound. (I want to use headphones to listen to music via bluetooth from my macpro)
the s10 works perfectly on my ipod touch 4g.

this is
ERROR HAS OCCURRED Bluetooth audio.
It failed to establish connection with their
audio device. make sure it is on and
in the range. you may need to restart the
audio section of the program you were using
STOP USING THE HEADSET WITH MICROPHONE.
ALSO HAVE A MOTOROLA BLUETOOTH SPEAKERS WHICH EQ5 work seamlessly with the Mac

My audio does not work...

My audio does not work. it says it's enabled, the troubleshooting tools i've used (several) find no problems, and yes, I have the latest drivers. When I start Windows Media Player, it says:
"Windows Media Player cannot play the file because there is a problem with your sound device. There might not be a sound device installed on your computer, it might be in use by another program, or it might not be functioning properly."
If I click Start, Control Panel, Sound... nothing happens. nothing. No error message, no window starts. Could it be my audio card failed?

Ok, it takes 3+ days to back up 400+GB of data, wipe Windows, reinstall all my software and restore all my data. All that drama is not worth repairing a sound card. Besides, we need to fix this for real, not duplicate the conditions that caused it to fail in the first place. In the future, it's best not to bring up that option at all. (We both know that rarely solves the issue permanently.)
I'd simply replace this so-so HP before I put myself in a position to lose 3 days of work.
However, I am still interested in finding a solution to this problem. Do you think HP is capable of solving this? If so, I'll look for a more detailed model number when I get home.
Thanks,
Gary

TS1718 Movie audio does not sync with movie

Hi,
The movies I have bought through iTunes store does not work properly. I bought two last week and when trying to play them back over the weekend, the audio is not sync'd with the movie playback. I have a Winodws 8 laptop and enough space for the films to be played. The software is all up to date and can therefore see no problem as to why this should not be working. Does anybody know of any way to resolve this to allow me to watch the films?
Thanks,
G

Hello grs1989,
Thank you for providing the details about the issue you are experiencing with audio out of sync with video in iTunes. I found an article with steps to address issues with audio and video playback being out of sync:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/ts1362
Thank you for using Apple Support Communities.
Best,
Sheila M.

CD/ Blu-ray Drive Will Not Open/ Function Correctly

My CD/ Blu-ray drive will not open. I can force it open with a paper clip and put in a disk that way but it does not activate and read the disk. The drive also does not appear as a file selection under my hard disk drives section of my computer.
With this I am assuming my optical drive is broken so I tried looking for a replacement. I searched for the name of the optical drive in the HP PartSurfer and it says it is called SPS-DRV DVD SATA BD Combo 12.7. Just to be sure, is that the correct part I am looking for? If so, and say I were to go ahead and order this part, how do I go about removing the optical drive in my labtop and replacing it with the new drive?
This question was solved.
View Solution.

Hi,
Yes..that is the right part for your notebook.
HP Pavilion dv6-3259wm Entertainment Notebook PC - (XZ087UA): 603678-001
You can follow the instructions from the links below:
Removing and Replacing the CD/DVD Drive
Or,
HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

TS1702 When I update to IOS6 on my 4S Facebook does not work properly, the news feed never updates it only says no new storeys and shows a picture of an antenna. When I reset my phone and go back to IOS5 Facebook works fine. What's up with IOS6 ????

When I update my iPhone 4S to iOS six Facebook does not work properly the newsfeed doesn't load properly and I can never see what's going on all I see is a picture of an antenna and a little thing underneath it says no new stories when I reset my phone back to iOS 5 then it works just fine and I don't have any issues so there must be something wrong with iOS six that isn't letting Facebook load properly

No I did not use any unauthorized methods for anything, I simply reset my phone back to factory.
<Edited By Host>

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applica

Adobe Creative Cloud (Desktop) does not work properly. The application is blocked : it could not be launch neither stopped. I'm on MAC Yosemite OS, does anyone know how to remove it properly or to force its stop. It does not appear in the launched applications.

I received no error message. The application was just trying to find applications unsuccessfully.
I am using MAC OS 10.10.1
I tried to uninstall the application but it seems that a kind of deamon is still installed thus providing me to reinstall properly. Do you know where are the elements to remove in order to get my machine just like before ?
Otherwise I would have to reinstall everything and this would be a pain.
Thanks for your help.

Blu-Ray audio does not loop properly on simple menu

Similar Messages

Maybe you are looking for