Blu-Ray audio only through TV internal speakers...not surround.

Just got a Toshiba 50L1400U. Two issues here......
1) When the HDMI cable from the Panasonic smart Blu-Ray player is connected to the HDMI port #2 on the TV audio only comes from the internal speakers and not out of the surround. The cable box currently functions fine as did the Blu-Ray HDMI connection with our old Toshiba TV with audio coming from the surround. Suggestions?
2) Is there a way to turn off the bar at the top of the TV screen to not show when it switches between 2 HD screens while changing stations? Meaning some stations are in 480p with most being in 1080p but the bar shows when swtiching between the 2.
Thank you for any help.

I don't believe there's a way to disable that bar.
As for the sound, you might want to call customer support.
- Peter

Similar Messages

Encore CS4 is transcoding compliant Blu-Ray audio assets when set to 'Do not transcode'

Hi there,
I have a Blu-Ray concert video project consisting of 3-menus, 4-sequentially linked timelines (intro-1, intro-2, main concert timeline, and credits).
All audio assets consist of 96k/24-bit WAV files from the same professionally rendered mastered audio source.
Here's the issue:
When importing my 96k/24-bit audio assets in Encore CS4, they all show as Blu-Ray compliant and maintain the 'Do not transcode' property in the assets menu.
However, after rendering the project to Blu-Ray I immediately noticed that the main concert timeline (2-hrs 10-min) had been transcoded down to 48k/16-bit while the other smaller intro/credits timelines had rendered correctly and were playing back at the desired 96k.24-bit rate.
In order to eliminate possible issues with the main timeline's audio file source, I created a smaller main timeline (35-min) using the exact same audio source files and lo & behold - the main timeline was not down-transcoded and is playing back at the desired 96k/24-bit rate.
I'm wondering if there is a non-documented limitation in rendering audio files over a certain size as my main timeline is made up of 2-total WAV files of 2.2Gb each.
I have the ability to import a single AIFF file at 4.4GB for the main timeline - but for some reason CS4 does not recognize AIFF files as Blu-Ray compliant and will show the transcode setting as 'Automatic'.
Imported AIFF files always showed as 'Do not transcode' in the Blu-Ray assets menu in Encore CS3 (even though there is a documented bug which prevents rendering AIFF audio to Blu-Ray and I would have to convert to WAV files and re-import anyway in CS3).
My next step is to try splitting the main timeline into shorter chunks, but this is not the direction I want to go in.
Any help would be greatly appreciated!
-Cheers

Ok, solved my own problem - solution below for those with similar issues.
1. My audio timelines exported from Final Cut Pro as AIFF are actually 'AIFC' which is technically not Blu-Ray compliant, thus Encore will need to transcode. Unfortunately - Encore has no quality preset settings for dealing with PCM audio transcodes higher than 48k/16-bit (why not?). Encore CS4 will happily pass 96k/24-bit through to a Blu-Ray build without transcoding if the supplied file is true AIFF (not-AIFC) and/or similarly compliant WAV files.
2. My main Encore timeline consisted of 2-WAV files at 2.2Gb each placed in a single Encore timeline due to the total audio being over 4GB thus requiring me to split the source audio files in half in order to stay under the 4GB limit for WAV files, and also because I had to export the FCP audio timeline using Compressor in order to generate Blu-Ray compliant audio files (non-AIFC). Also - (possible bug?) if Encore has 2-separate audio files in the same timeline it will transcode the audio to the current project's default audio settings (48k/16-bit in my case) - even though the assets are showing as 'Do not transcode' in the asset menu for Blu-Ray. It clearly states in the Encore CS4 manual that imported WAV files at 96k/24-bit will not be transcoded - but it appears in this case when 2-audio files are placed in the same timeline that it will transcode with no warning - bothersome to say the least.
I suppose the alternative is to work with a lossless audio format which supports files larger than 4GB - which would only require a single audio file for a single Encore timeline, but other than DTS Master Audio (not available on this project) I'm not sure what audio format would work in Encore to support 96k/24-bit audio files larger than 4GB.
If anyone knows - drop some knowledge!
-Cheers

TRUE BLU-RAY AUDIO - X58 Pro-E very important question !

I have a problem.
I want to buy a motherboard with X58 Pro-E and build HTPC HD Audio.
What does this mean "TRUE BLU-RAY AUDIO" ?
There is no HDMI output, only S/PDIF !!!!!
- There is no HD audio bitstream (DTS-HD MA/TrueHD) - no HDMI !!!
- Does not decode HD Audio -> LPCM 7.1 - no HDMI !!!
- That decodes the HD Audio (7.1) to analog?
- If only decodes HD from Blu-Ray Stereo (via. SPDIF)?
What does this mean "TRUE BLU-RAY AUDIO" on MSI motherboard ?
Regards.
HerrMan

>> TRUE BLU-RAY AUDIO <<
• The loss-less content protection technology with full-rate audio enjoyment from Blue-ray Disc
• Support for 24-bit / 192kHz sample rate offers high quality digital decoders and speakers
• support 7.1 channels playback, plus 2 channels of independent stereo sound output (multiple streaming) through the front panel stereo outputs
There is no HDMI because there is no onboard video. The video card you get would need to have HDMI output.
LPCM: Linear Pulse Code Modulation. It is an algorithm used to convert analog audio to digital. It gives pure loss less representation of the original analog audio in digital.
7.1 is the latest in speaker configuration. Mono is one speaker, stereo is two, 5.1 has 5. The problem with 5.1 is it produces angled audio. To get the best out put you have to sit in the center and all speakers have to be placed the right way. 7.1 solves those problems, even if the speakers are not perfectly aligned you still get very good results.
S/PDIF-out JSP1 on MB connects to video card for HDMI sound.
Download the manual >> here << and browse through it.

Trying to use headphones to watch a show online... sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

trying to use headphones to watch a show online... sound still comes out of the internal speakers, not through my headphones.. i used help, said to go to sound preferences and choose headphones from the output pane, but it doesn't list headphones

trying to do this on a macbook pro...please help

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only

If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.

My wireless earbuds work just fine, but some third-party apps play audio only through the iPod speaker even though the buds are properly connected.

My wireless earbuds work just fine, but some third-party apps play audio only through the iPod and iPhone speaker even though the buds are properly connected. Does anyone know why and is there a solution?

Assuming you are using Bluetooth headphones, do the apps have the option to use Bluetooth?
The app should have an option to select the speaker (or wired earphones) or the Bluetooth headphones.
You can also try:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

HP Pavilion 15-p027ne, Audio working through headphones/earphones but not through speakers

HP Pavilion 15-p027ne:
Audio working through headphones/earphones but not through speakers.
I downgraded from windows 8.1 to Windows 7 (64-bit) and the problem is still not resolved.
Appreciate any troubleshooting tips.
Thanks.
- HP Pavilion User.

Hi there @donimuha
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are getting sound from the headphones/earplugs but not from the system speakers. I am happy to assist you with this.
As the sound is working through the audio jack, I will assume for now that the audio driver is fine. Please check through the following page, which is very comprehensive. If you are still having a problem it is possibly a hardware issue with the speakers.
No Sound from the Speakers (Windows 7)
Let me know if that works for you.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Blu-ray error:"file already exists", code "6" , Note : 118240 11771552 11826176

It has been a 3 days that i have try to make Blu-ray .ISO image on Encore CS5, i always have that message: Blu-ray error: "file already exists", code "6" , Note : 118240 11771552 11826176. Everything seems to work fine before.
Windows 7 Ultimate 64bit,
Intel Core i7-2600K Sandy Bridge 3.4GHz,
CORSAIR CWCH50-1 High Performance CPU Cooler, ASUS P8P67 PRO,
G.SKILL Ripjaws X Series 16GB,
EVGA GeForce GTX 460 (Fermi) 2GB ,
Matrox MXO2 with MAX,
COOLER MASTER HAF 932 Black ATX Full Tower Computer Case,
Adobe CS 5 Production Premium
thanks in advance

Thank you ram8kumar. I will answer step-by-step, as you did:
- there is no subtitle in the project
- .PSD file is not to large, 2 files 1920X1080 and only 2-3Mb, and they only used as menu (I did this a milion times before), there is no slideshow in the project
- Disc name is not blank
- there is no sledeshow (burning a slideshow with no pan and zoom or with no transition with H264 settings)
Lest two might be the problem.
- I exported .h264 files from PPro CS5 with Matrox MXO2 Mini with MAX, Matrox preset and if I remember right target was 30Mb/sek
- Audio and video track duration in the timeline was 1(one) frame difference.
Thank you agan, and I will post the results as soon as I will get done with it.
Vladymyr.

Internal speakers not working after upgrading to Maverics

internal speakers not working after upgrading to Maverics

There are many possible causes for this issue. Take each of the following steps that you haven't already tried.
1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
4. If you've installed a software equalizer called "Boom" or anything similar, update or delete it and restart.
5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select the Output tab. If the Mute boxes are checked, uncheck them. Move the Volume sliders all the way to the right.
7. If a red light is coming from the audio-out port, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
9. If you have a MacBook Air, turn off Bluetooth and restart.
10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
11. Reset the NVRAM.
12. Reset the SMC.
13. Reinstall OS X after backing up all data.
14. Make a "Genius" appointment at an Apple Store.

Imac intel internal speakers not working windows8

Imac intel internal speakers not working with windows 8 external and head phones work just fine

Macs don't support Windows 8 at this moment. Wait until Apple launches drivers for that new Windows edition

Why the iPad internal speakers not working with some applications and key sound?

My iPad1 ' internal speakers not fully functioning. It is working with music and video, YouTube , but not working with applications such as games.
Also with key pad sound .
Please help me in this regard.

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

The Quciktime 10.3 playback the audio-only stream of mpeg2ts seem not playback correctly

The Quciktime 10.3 playback the audio-only stream of mpeg2ts seem not playback correctly.
When the Quciktime 10.3 start playback my audio-only .ts file. The qucktime seem to be muted on a about 70% of progress bar. or sometime will fast-forward for a while. (not stop playing. just muted or fast-forward and the progress bar keep going on)
but, it's playback well on Quicktime 10.2.
this audio-only ts file as my dropbox:
http://dl.dropbox.com/u/68121779/mp2lc-3.ts
I have try to download the fileSequence0.ts ~ fileSequence10.ts (from http://devimages.apple.com/iphone/samples/bipbop/bipbopall.m3u8) and combined this .ts as followings command on Win7:
copy /b fileSequence0.ts+fileSequence1.ts+fileSequence2.ts+fileSequence3.ts+fileSequenc e4.ts+fileSequence5.ts+fileSequence6.ts+fileSequence7.ts+fileSequence8.ts+fileSe quence9.ts+fileSequence10.ts fileSequence-0-10.ts
the Quciktime 10.2 (Mountain Lion), and Media Player 12.0.7601.18150 (Win7 64bit) seem playback well.
but, Qucitime 10.3 (Mavericks) seem muted at about 70% of progress bar.
I think quciktime 10.3 do something changed. and make some behavior incompatible.

The Quciktime 10.3 playback the audio-only stream of mpeg2ts seem not playback correctly.
When the Quciktime 10.3 start playback my audio-only .ts file. The qucktime seem to be muted on a about 70% of progress bar. or sometime will fast-forward for a while. (not stop playing. just muted or fast-forward and the progress bar keep going on)
but, it's playback well on Quicktime 10.2.
this audio-only ts file as my dropbox:
http://dl.dropbox.com/u/68121779/mp2lc-3.ts
The downloaded TS file contains AAC which uses ADTS—a self synching Audio Data Transport Stream format. According to Wikipedia, "This file and streaming-based format are defined in MPEG-2 Part 7, but are only considered informative by MPEG-4, so an MPEG-4 decoder does not need to support either format." Based on this statement, my guess is that Apple now considers such support to be no longer needed in the QT X v10.3 media player since AAC content is, by default, normally found only in MOV, MP4, M4V, M4A, M4B, and similar containers which are not only supported by the system player but all Apple mobile device players. Even the latest version of VLC seems to have dropped this support for the AAC ADTS audio found in your downloaded TS file.
As to audio dropout in QT X v10.3, the problem you describe seems to be a "sync" associated issue. On my system clicking the playhead to move its current position resets the sync and audio becomes playable again.
I have try to download the fileSequence0.ts ~ fileSequence10.ts (fromhttp://devimages.apple.com/iphone/samples/bipbop/bipbopall.m3u8) and combined this .ts as followings commandon Win7:
copy /b fileSequence0.ts+fileSequence1.ts+fileSequence2.ts+fileSequence3.ts+fileSequenc e4.ts+fileSequence5.ts+fileSequence6.ts+fileSequence7.ts+fileSequence8.ts+fileS e quence9.ts+fileSequence10.ts fileSequence-0-10.ts
Somewhat confused by your playlist URL reference here. Reference is for the following:
which is a QuickDraw video file which might be more easily captured as a QT X player screen rendering at a desired playback resolution. Since you say you are dealing with other TS sequences here, I am not even certain this is the playlist file you really wanted to reference.

[solved] HDMI audio only through laptop speakers

I am running archlinux on an original surface pro with alsa. All sound works fine except that with an hdmi cable plugged in the audio still routes through the surface speakers and never through the tv or lcd projector. I have googled a plenty, but not found a fix. Any advice for what I should be trying would be appreciated.
Here is what aplay -L shows
britt@superman ~ $ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=PCH
HDA Intel PCH, ALC280 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, ALC280 Analog
Front speakers
surround21:CARD=PCH,DEV=0
HDA Intel PCH, ALC280 Analog
2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, ALC280 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, ALC280 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, ALC280 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, ALC280 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, ALC280 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
I notice the front and HDMI card,device specification seems to be the same.
Thanks in advance, Britt
Last edited by brittanderson (2015-01-09 21:33:04)

Finally found the right page. My problem was solved by editing ~/.asoundrc as described here:
https://wiki.archlinux.org/index.php/Ad … s_not_work

Satellite A660-1DZ - Blu-ray HDMI playback through TVe

I've connected the PC to a Philips 42" TV with 1080p capability and HDMI 1.3a control. I selected the TV as the only display device (Fn+F5 function).
The default resolution came up as 1920x1080. DVDs play without problems with the bundled Toshiba player and upscaling on.
I've just bought the OpusArte blu-ray experience disc. It loads it starts to play with the bundled Corel DVD player. Then every 3 or 4 seconds the sound is interrupted - i.e. stops and stars again. Also the sound and vision are out of sync. It's almost as if the sound is being taken off the disc in 'packets' and the joins are audible.
I can't really find any settings to change the audio - it's going through as 2-channel stereo.
If I change the resolution on the TV from 1920x1080 to 1280x720 it plays OK until about two minutes before the end of an item when the sound stops and restarts suddenly.
Playback on the PC without the TV connected is OK.
I don't know what resolution blu-rays are meant to play at, but the picture looks identical at both I've tried.
I've also noticed that the PC uses Intel Graphics all the time despite having an Nvidia card. I bought this particular laptop partly because it had blu-ray and HDMI capability. Also the discrete Nvidia graphics don't seem to be used. I wonder if the processor isn't coping with the video and the audio?
Any help or ideas on this would be very welcome.
Thank you
Message was edited by: eddyad - minor additin to text

> Playback on the PC without the TV connected is OK.
To be honest its hard to say if its just the issue with this special blue-ray disk of with the notebooks software.
I have some blue-ray disks at home and some disk didnt work correctly
So you should definitely test this with another Blue-ray disk
Furthermore I recommend checking the sound driver update but to be honest I think its not software issue since the playback is ok on the internal notebook screen.
Maybe you should also test the different HDMI cables since there are big differences between single cables.

Blu-Ray audio does not loop properly on simple menu

I have authored a Blu-Ray disc using CS4 of Encore. Each menu is very simple: No motion elements. I have added a short clip of music to each (about 30 seconds). This is already transcoded AC3 audio (to ensure it matches the audio on the main movie(s)).
When playing back in test mode, the menus play fine. However, on a PS3 (the only BD player I have), it plays a few seconds (up to 10 seconds) of the audio and then loops. The false loop point occurs at different times on each menu.
The loop point on the menus is 0. The audio length is set to 30 seconds in the project and the menu is set to loop forever.
Anyone else come across this?
Thanks

Seems that this is a bug (rather bad one, actually), but there is a work around of sorts.
http://forums.adobe.com/message/2047349#2047349

Blu-Ray audio only through TV internal speakers...not surround.

Similar Messages

Maybe you are looking for